iStorage Server: iSCSI SAN for Windows Server 2008 Clustering

iStorage Server: iSCSI SAN for Windows Server
2008 Clustering
Friday, May 28, 2010

KernSafe Technologies, Inc.

www.kernsafe.com

Copyright © KernSafe Technologies 2006‐2010. All right reserved.

Table of Contents

Overview ...................................................................................................................................................... 3
.

Configuring on Domain Controller ............................................................................................................... 5

Network Adapter ...................................................................................................................................... 5

Install Active Directory ............................................................................................................................. 6

Install DNS .............................................................................................................................................. 16

Configuring on iStorage Server .................................................................................................................. 28

Network Adapter .................................................................................................................................... 28

Preparing Quorum Volume .................................................................................................................... 29

Preparing Generic Volume ..................................................................................................................... 36

Configuring on Cluster Node 1 ................................................................................................................... 43

Network Adapter .................................................................................................................................... 43

Join to the domain ................................................................................................................................. 45

Log in to iSCSI disks ................................................................................................................................ 49

Installing Failover Clustering Service ..................................................................................................... 58

Configuring on Cluster Node 2 ................................................................................................................... 64

Network Adapter .................................................................................................................................... 64

Join to the domain ................................................................................................................................. 66

Log in to iSCSI disks ................................................................................................................................ 70

Installing Failover Clustering Service ..................................................................................................... 78

Configuring Failover Clustering .................................................................................................................. 84

Validate a Configuration ........................................................................................................................ 84

Create a Failover Cluster ........................................................................................................................ 93

Contact ...................................................................................................................................................... 102

Overview
KernSafe iStorage Server is an advanced and powerful, full‐featured software‐only iSCSI Target that fully
conforms to the latest iSCSI Standard 1.0 (former Draft 20). It is an IP SAN solution allowing you to
quickly export existing storages such as disk images, VHD files, physical disks, partitions, CD/DVD‐ROMs,
tapes or any other type of SCSI based devices and even a variety of popular CD/DVD images to the client
machines. The software thus delivers immediate benefits, as it allows storage to be consolidated,
virtualized and centrally managed. iStorage Server also provides RAID‐1 (mirror) feature enabling you to
create two iSCSI devices for mirror backup. Furthermore, iStorage Server also supports a lot of features
such as: VHD (Virtual Hard Disk) target, snapshots, STPI, RAID‐1 and failover, these features are very
important and poplar in storage industry world and make iStorage Server is suitable for any size of
business.

High‐availability clusters (also known as HA Clusters or Failover Clusters) are computer clusters that are
implemented primarily for the purpose of providing high availability of services which the cluster
provides. They operate by having redundant computers or nodes which are then used to provide service
when system components fail. Normally, if a server with a particular application crashes, the application
will be unavailable until someone fixes the crashed server. HA clustering remedies this situation by
detecting hardware/software faults, and immediately restarting the application on another system
without requiring administrative intervention, a process known as Failover. As part of this process,
clustering software may configure the node before starting the application on it. For example,
appropriate file systems may need to be imported and mounted, network hardware may have to be
configured, and some supporting applications may need to be running as well.

After iStorage Server 2.0, it supports server side mirroring, synchronous replication and failover which
allows user to create a high‐availability iSCSI SAN for Windows Server 2008 clustering and Hyper‐v.

This document gives you detailed step‐by‐step instructions on KernSafe iStorage Server configuring for
Windows Server 2008 or Windows Server 2008 R2 failover clusters. Before to do so, prepare the
following three computers or virtual machine in Hyper‐v:

Name IP Address Detail
08DC 192.168.1.2 Domain Controller
08Node1 192.168.1.101 Failover Node 1
08Node2 192.168.1.102 Failover Node 2
KernStorage 192.168.0.2 iStorage Server

Configuring on Domain Controller

Network Adapter
For working in clustering environment, the network adapter must be assigned a static IP address. Select
the Internet Protocol Version 4(TCP/IPv4) and then press the Properties button, the Internet Protocol
Version 4 (TCP/IPv4) dialog is shown. As Active Directory requires DNS, an address must be provided, in
this case we can specify itself IP address. DNS will be installed later after installed Active Directory.

Type the IP address and DNS server address.

Press the OK button to continue.

Install Active Directory
Select Start‐>Run and type dcpromo in the Open input box.


The Active Directory Domain Services Installation Wizard is shown.

Press the Next button to continue.

The Active Directory Domain Services Installation Wizard is shown, before to do next, please read the
introducing instructions carefully.


Because we are creating Active Directory, Select the Create a new domain in a new forest option.


Specify the name of Forest Root Domain.


Select the Forest functional level.

Select Windows Server 2008 or Windows Server 2008 R2 if building Windows Server 2008 R2 clustering.


Select the additional options for this domain controller.

Keep the selection of the DNS Server.


The Active Directory Domain Services Installation Wizard is shown.

Press the Yes button to continue.

Customize the directories for Database folder, Log files folder and SYSVOL folder.


Specify the Directory Services Restore Mode Administrator Password.


Check all of the parameters are correct; press the Back button if any change is required.


After a while, Active Directory Domain Services Installation is completed.

Press the Finish Button to close the wizard.

Restart is required.

Press the Restart Now button to restart the computer.

Install DNS
Use administrator role to log on to the Domain controller machine and launch the DNS Manager.

Right click on the Reverse Lookup Zone in the left tree view and then select New Zone… menu item.

The New Zone Wizard is shown.


Select zone type.

Select the Primary zone and keep the selection of Store the zone in Active Directory.


Select zone replication scope.

Keep the default selection.


Choose reverse lookup zone name.

Select IPv4 Reverse Lookup Zone.


Type the network ID or zone name.

Select the Network ID and then type IP address in the Network ID.


Specify dynamic update options.


Check all the parameters all required, press the Back button if any change is required.

Press the Finish button to close the New Zone Wizard.

Right click on the KernSafe.Local in the left tree view of DNS Manager, then select New Host (A or
AAA)… menu item.

The New Host dialog is shown.

Type host name in the Name and IP address in the IP address field for the 08Node1 machine.

Check the Create associated pointer (PTR) record checkbox.

Press the Add Host button to add 08Node1 DNS record.

Type host name in the Name and IP address in the IP address field for the 08Node2 machine.

Check the Create associated pointer (PTR) record checkbox.

Press the Add Host button to add 08Node2 DNS record.

Press the Done button to close New Host dialog.

Now we will see the two records in the DNS Manager.

Configuring on iStorage Server

Network Adapter
Version 4 (TCP/IPv4) dialog is shown.

Set the second network adapter of Domain Controller as shown in the figure. IP address is set as
192.168.2.1 and Subnet mask is set as 255.255.255.0.

Preparing Quorum Volume
Launch the iStorage Server management consolle, press the Create button on the toolbar of iStorage
Server management console, the Create Device Wizard is shown.

Select a device type

Choose Hard Disk.


Choose Image File in iSCSI Medium Type page.

Then press Next button to continue.

We choose Standard Image File and then press the Next button to continue.

Specify image file path and size.

Select Create a new image file or Use existing image file if you already have a one.

Specify the device size.


Set authorization mode.

Specify authorization mode as you required, we take IP Filter as an example.


Finish creating iSCSI Target

Type a target name in the Target Name field, or use the default.

Check the Enable multiple initiators with full access connected (sharing and clustering) check box.

Press the Finish button to continue.

Make target writable. Press the View button on the toolbar of iStorage Server Management Console,
then change to IP Filter view.

Right click on the 0.0.0.0 item, and then select Access ‐> Full Access.

Preparing Generic Volume
Launch the iStorage Server management consolle, press the Create button on the toolbar of iStorage
Server management console, the Create Device Wizard is shown.

Select a device type

Choose Image File in iSCSI Medium Type window.

Then press Next button to continue.

We choose Standard Image File and then press Next button.

Specify image file path and size.

Specify authorization mode as you required, here we use IP Filter.


Finish creating iSCSI Target

Type a target name in the Target Name field, or use the default.

Check the Enable multiple initiators with full access connected (sharing and clustering) check box.

Press the Finish button.

Now the sample images is shown in the iStorage Server management console if successful.

Configuring on Cluster Node 1

Network Adapter

Version 4 (TCP/IPv4) dialog is shown.

Type in the IP address, Subnet mask, Default gateway and Preferred NDS server.

Set the second network adapter of 08Node.

Type in the IP address and Subnet mask.

Press the OK button to change IP address.

Join to the domain
Press the OK button to change IP address.

Open System Properties page.

Click on the Change settings link, the System Properties Dialog is shown.

Press the Change… button.

Type 08Node1 in the Computer name and kernsafe.local in the Domain.

Press the OK button to change computer name and join the domain.

Domain controller account is required to join the domain.

Type your user name and password.


If successful, the Computer Name/Domain Changes notification dialog is shown as below.


Restart is required.

Press the Restart Now button to restart the computer.

Log in to iSCSI disks
Lunch the Administrative Tools ‐> Microsoft iSCSI initiator.

Press the Discovery Portal button, the Discovery Target Portal dialog is shown.

Type IP address or NDS name and Port of the iStorage Server in the required fields.

Press the OK button to add.

Select the Targets page.

Select the targets just added and then press the Connect button.

Keep selection of the Add this connection to the list of Favorite Targets.


If successful, the logged on targets are shown in the figure.

Launch the Windows Computer Management Console.

An Initialize Disk dialog is shown.

Keep the selection of the tow disks.

Select partition style for the selected disks.


Right click on the Disks and then select New Simple Volume, partition and format the two disks followed
by wizard.

If successful, the new volumes created are shown in the figure below.

Installing Failover Clustering Service
Launch the Windows Server manager Console.

Select the Features node from the left tree view.

Click the Add Features link, the Add Features Wizard is shown.

Select the Failover Clustering.


Press the Install button to install the Failover Clustering feature.

The installation of the Failover Clustering is going on.

If successful, the wizard will complete and show as the figure below.

Press the Close button.

Configuring on Cluster Node 2

Network Adapter

Type 08Node2 in the Computer name and kernsafe.local in the Domain.

Press the OK button to change computer name and join the domain.

Domain controller account is required to join the domain.

Type your user name and password.


Launch the Windows Computer Management Console.

Right click on the Disk1 and then select the Online menu item, bring Disk1 online.

Right click on the Disk2 and then select the Online menu item, brings Disk2 online.

Right on the Disk1 and then select the Change Driver Letter and Paths… menu item, change the letter of
Disk1 to G:.

Right on the Disk2 and then select the Change Driver Letter and Paths… menu item, change the letter of
Disk2 to Q:.

Installing Failover Clustering Service
Launch the Windows Server manager Console.

Press the Close button.

Configuring Failover Clustering

Validate a Configuration
Node that this step is not necessary for creating a cluster, but it ensures that the configuration is
suitable for failover clustering.

Launch to the Windows Failover Cluster Manager console in node 1 or node 2 machines.

Click on the Validate a Configuration… link.

The Validate a Configuration Wizard is shown.


Add nodes to the cluster.

Press the Browse button, the Select Computers dialog is shown.

Press the Advanced… button.

Select the 08NODE1 item and then press the OK button to add.

Press the OK button.

Press the Browse… button and add 08NODE2 by through the same way.

Select Run all tests (recommended).



If successful, all the tests include SCSI‐3 Persistent Reservation are valid and shown as the figure below.

Press the Finish button to complete configuration validation.

Create a Failover Cluster
Click on the Create a Cluster… item in the Actions panel of Failover Cluster Manager.

The Create Cluster Wizard is shown.

Press the Browse… button and the Add button to add nodes to this cluster.


Specify IP address for the cluster.

Type an IP address in the Address field.


Press the Next button to continue or press the Pervious button if any changes are needed.

If successful, the Create Cluster Wizard complete as shown in the figure below.

Press the Finish button to continue.

Now the creation of the cluster is completed, expand the cluster node and select the Storage node, it
will shown as the figure below, both cluster disk are shown online.

Contact
Support: support@kernsafe.com
Sales:   sales@kernsafe.com
Home Page:   http://www.kernsafe.com/
Product Page:   http://www.kernsafe.com/product.aspx?id=5
Licenses   http://www.kernsafe.com/product.aspx?id=5&name=License+Types
Forum: http://www.kernsafe.com/forum/

KernSafe Technologies, Inc.

www.kernsafe.com

Copyright © KernSafe Technologies 2006‐2010. All right reserved.

iStorage Server: iSCSI SAN for Windows Server 2008 Clustering

More Related Content

What's hot (12)

Viewers also liked (10)

Similar to iStorage Server: iSCSI SAN for Windows Server 2008 Clustering (20)

More from KernSafe Technologies (11)

Recently uploaded (20)

iStorage Server: iSCSI SAN for Windows Server 2008 Clustering