Kto12electricalteachersguide 130822014236-phpapp02 (1)

K to 12 BASIC EDUCATION CURRICULUM
Exploratory Course on
ELECTRICAL INSTALLATION AND
MAINTENANCE
Republic of the Philippines
DEPARTMENT OF EDCUATION
TECHNOLOGY AND LIVELIHOOD EDUCATION
TEACHER’S GUIDE

K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – ELECTRICAL INSTALLATION AND MAINTENANCE
(Exploratory)
*TWG on K to 12 Curriculum Guide – version January 31, 2012 2
Introduction..................................................................................................................................................................................................................3
Background Information
The Overall Goal of the K to 12 Curriculum .......................................................................................................................................................3
The Conceptual Framework of the Teaching of TLE..........................................................................................................................................3
The TLE Exploratory Courses............................................................................................................................................................................5
The Learning Modules and Lessons............................................................................................................................................................................6
New Feature of the Teaching of TLE ...........................................................................................................................................................................6
About the Learning Module
Design of the Module.........................................................................................................................................................................................7
Parts of the Lesson............................................................................................................................................................................................8
Reflection ..................................................................................................................................................................................................................11
Curriculum Guide.......................................................................................................................................................................................................12

(Exploratory)
Teacher’s Guide for TLE Exploratory Course on Electrical Installation and Maintenance
Introduction
This Teacher’s Guide is intended for you, the TLE teacher, who teaches any of the more than 24 TLE exploratory courses in the Grades 7 and
8 of the K to 12 curriculum. To ensure that you teach the TLE exploratory courses the way they were intended to be taught, you must see the big
picture of the K to 12 curriculum and the teaching of TLE. Some background information is necessary.
Background Information
1. The Overall Goal of the K to 12 Curriculum
The K to 12 Curriculum has as its overarching goal the holistic development of every Filipino learner with 21st
century skills who is
adequately prepared for work, entrepreneurship, middle level skills development and higher education. The overarching goal of the K to 12
curriculum, tells you that the teaching of TLE plays a very important role in the realization of the overall goal of the curriculum. Whether or not
the K to 12 graduate is skilled and ready for work, entrepreneurship and middle skills development depends to a great extent on how effectively
you taught TLE.
2. The Conceptual Framework of the Teaching of TLE
Below is a schematic diagram of Technology and Livelihood Education (TLE) framework in general secondary schools. This should guide
you in the teaching of the TLE exploratory courses.

(Exploratory)
Figure 1.TLE Framework
The diagram shows that Technology and Livelihood Education encompasses the field of Home Economics, Industrial Arts, Agri-Fishery Arts
and ICT. The 24 TLE courses can be categorized under any of these fields.

(Exploratory)
TLE is geared towards the development of technological proficiency and is anchored on knowledge and information, entrepreneurial concepts,
process and delivery, work values and like skills. This means that the TLE that works is one that is built on adequate mastery of knowledge and
information, skills and processes, acquisition of right work values and life skills. The TLE that is functional is one that equips students with skills for
lifelong learning. TLE that is concerned only with mere definition of terms is meaningless and shallow. TLE that is focused on mastery of skills and
processes without right work values is anemic and dangerous. An effective TLE is one that is founded on the cognitive, behavioral or psychomotor and
affective dimensions of human development. So when you teach TLE, teach facts, concepts, skills and values as a whole.
The diagram likewise shows that entrepreneurial concepts also form part of the foundation of quality TLE. It is expected that your TLE students,
after using the Learning Module on Entrepreneurship, imbibe the entrepreneurial spirit and consequently set up their own businesses in the areas of
Agri-Fishery Arts, Industrial Arts, Home Economics, and Information and Communication Technology.
TLE by its nature is dominantly a skill subject and so you must engage your students in an experiential, contextualized, and authentic teaching-
learning process. It is a subject where your students learn best by doing. It is integrative in approach. For instance, it integrates entrepreneurship with
all the areas of TLE. It integrates concepts, skills and values.
3. The TLE Exploratory Courses
TLE in Grades 7 and 8 are exploratory in nature. Your school will choose at least 4 from the list of 24 courses for which 23 Learning
Modules have been prepared. 1 Your school’s choice is determined by the availability of its resources (faculty and facilities) as well as the local
needs and resources of the community.
The 24 TLE exploratory courses focus on four basic common competencies as follows: 1) use and maintenance of tools and equipment; 2)
mensuration and calculation; 3) occupational health and safety procedures, and 4) preparation and interpretation of technical drawing. Why b
are these competencies called basic ? Because they are competencies that you must acquire in order that you can do higher level
competencies . They are also described common because these are true to all TR-based TLE courses.
1
There are 24 TLE courses but there are only 23 Learning Modules because there is one Learning Module for Tailoring and Dressmaking.

(Exploratory)
The Learning Modules and Lessons
There is a Learning Module for each exploratory course. If there are 24 exploratory courses then you have 24 Learning Modules in your hands.
But you will use 4 Modules only for the entire year in Grade 7 (plus a fifth one on Entrepreneurship) and another 4 Modules in Grade 8 (plus a fifth one
on Entrepreneurship). Each Learning Module consists of 4 to 5 Lessons2
. The Lessons are focused on the 4 to 5 basic competencies. To avoid
meaningless repetition of the teaching of the 5 common competencies, you have to teach them in the context of the TLE course. For example, you
teach “use and maintenance of tools” in beauty care when you are teaching the course on Beauty Care. You teach the same competencies - use and
maintenance of tools - in Horticulture but in the context of horticulture and so your tools will not be the same.
New Feature on the Teaching of TLE
What’s new in the teaching of TLE in the K to 12 curriculum? In the K to 12 curriculum, the TLE courses are taught based on the learning
outcomes and performance criteria stated on the Training Regulations (TR) from Technical Education Skills and Development Authority (TESDA).
They are TR-based.
Why is this necessary? To prepare the K to 12 graduate for lucrative work, he/she must earn a National Certificate (NC) I, II or even an NC of
higher level that is required by industry. This he/she earns after passing an assessment given by TESDA.
How can you ensure that the K to 12 high school student (Grade 9 to 12) pass TESDA assessment and obtain an NC? By seeing to it that you
teach the TLE course in accordance with the performance criteria and learning outcomes laid down in the TESDA Training Regulations.
Do the exploratory courses enable the high school student to earn already an NC? Not yet. Completion of the exploratory courses may not yet
qualify a high school student to take an assessment for an NC. Instead, it helps him/her earn a Certificate of Competency (COC) at least in Grade 9
that will lead eventually him/her to an NC. In short, the COC paves the way to the earning of an NC.
Student’s choice of TLE specialization begins in Grades 9. After having been exposed to an array of TLE courses during the exploratory phase
in the first two years, the student will be most benefited, if in Grades 10, 11 , or 12 he/she continues with a TLE course in which he/she already has a
COC. In that way, he/she will get an NC faster.
2
Some Learning Modules combined use and maintenance of tools to make one Lesson, so the number of Lessons amount to 4; others made separate Lessons for use of tools and
for maintenance of tools, thus the total is 5 Lessons.

(Exploratory)
About the Learning Module
1. Design of the Module
a. The Module is designed to be a teacher-assisted learning kit or a self-learning kit on . competencies that a Grade 7 TLE ought to possess.
It explores the course on Electrical Installation and Maintenance which helps your student earn a Certificate of Competency in Grade 9
which leads to a National Certificate Level I / II (NCI / II) in Grades 10, 11 or 12.
b. The Learning Module is made up of 4 to 5 Lessons based on the competencies. Each Lesson contains the following:
1) Learning Outcomes
2) Performance Standards
3) Materials/Resources
4) Definition of Terms
5) What Do You Already Know?
6) What Do You Need to Know?
7) How Much Have You Learned?
8) How Do You Apply What You Learned?
9) What Is Your Score?
10) References
There are some TLE Modules which have a section on “ How Do You Extend Your Learning?”. This section is meant for enrichment.
It is usually given as an assignment for not everything can be taught and done in the classroom given the limited time.

(Exploratory)
2. Parts of the Lesson - The following explain the parts of each Lesson, describe what your students’ task as well as your task.
Part of the Lesson Students’ Task Teacher’s Task
1. Learning outcomes are what your TLE
student is supposed to know and be able
to do after using the module. Since our
TLE courses are TR-based, all learning
outcomes written here are lifted from the
TESDA TR. In the Curriculum Guide ( the
matrix which contains Content Standard,
Performance Standard, Learning
Competencies, Projects/Activities,
Assessment, Duration), the identified
Learning Outcomes are written in the
column of Learning Competencies.
Students acquaint themselves with
the learning outcomes and
performance standards
and make them their personal
goals.
You introduce the learning outcomes to your students
and make sure that they understand them and make
these learning targets their own .
Make these your goals for instruction.
2. Performance Standards are referred to
as “performance criteria” in the TESDA
TR. They are more specific descriptions of
the student’s behavior that serve as
evidence that the expected learning
outcomes have been realized with the
expected level of proficiency or in
accordance with established standards.
The learning outcomes and performance
standards set the direction of your lessons.
These are what you should teach and, in
Students clearly understand the
performance standards and make
them their own learning goals.
You introduce the performance standards to your
students and make sure that they understand them
and make these performance standards their own .
Let these standards give your lesson its specific direction.

(Exploratory)
turn, what you should assess. They are
identified and are written for you in the
Curriculum Guide.
3. Materials and References
To teach effectively, you need materials
and references. Materials may include
equipment, hand tools or consumables.
The references are the books, magazines,
articles, websites you yourself and your
students will read or refer to in order to
gain greater understanding of the lesson.
They are either in soft copy or hard copy.
Get to know the materials. They are
part of the Lesson.
By all means, read the references
for lesson mastery.
prepare the materials you need in advance. for gadget,
tool or equipment, it is always wise to prepare, check and
try them in advance to ensure that they function when you
use them. as the saying goes “forewarned is forearmed.”
Be resourceful in the preparation of materials. You are
strongly encouraged to use appropriate local materials
as substitute for listed materials that are not available.
For effective teaching, your lesson preparation should
include reading the list of references.
Do not limit yourself to the list of reference. If you discover
good reference material/s, add to the list of references.
Introduce the references to your students. Motivate them
to read these references as they go through the module
for lesson mastery.
4. The definition of terms and acronyms
will help you understand the meaning of
key words in your lesson. Defining key
words as they are used in your lesson will
ensure that the key terms in your lesson
mean one and the same for everyone in
class and so avoid misunderstanding.
Refer to the definition of terms for
greater understanding of the lesson.
Remind your students to refer to the definition of
terms and acronyms for clearer understanding of the
lesson.
5. The section “What Do You Already Take the test honestly. Tell your students to accomplish the pretest. Explain that

(Exploratory)
Know” is intended to determine entry
knowledge and skills of your students to
find out if you have to teach the lesson,
teach some parts of the lesson or skip it
entirely because your students already
know it. This is done by way of a pretest.
Check answers against the answer
key provided.
the purpose of the pretest is to find out how much they
already know about the lesson in order to determine your
next steps. It is, therefore, necessary that they take the
test honestly, if they want to learn or want to be helped.
Make it clear to them that their scores will not be recorded
for grading purposes and will not be taken against them.
If you find out that your students already know what you
are about to teach, logic dictates that you do not need to
teach it anymore. You may as well proceed to the next
lesson. If, however, you find out that they do not yet know
what you are about to teach, then by all means teach. Or if
you discover that your students have some erroneous
concepts, then teach and correct their misconceptions. To
know what your students already know and do not yet
know will guide you in adjusting your instruction.
6. “What Do You Need To Know?”- This
section contains one or more Information
Sheets and for some modules an
Operation Sheet. These are important
notes for the TLE student to read after
which he/she is asked to do a Self-check
to determine how much he/she has
learned. The self-check functions as a
pretest.
Read and understand the
Information Sheet/s and /or
Operation Sheet.
Be prepared For a Self-check
which serves as a posttest.
Correct answers by referring to the
answer key.
Make sure students are engaged in reading the
Information Sheet /Observation Sheet and in answering
the self-check.
Give assistance to your students where needed.
7. “How Do You Apply What You
Learned?” – In this section, you give your
Do the Activity. Find a way to test real life application of what your
students have learned.

(Exploratory)
student the opportunity to transfer what
he/she has learned in another activity or in
real life situation. Ideally, this should be a
performance test, what you usually call
practical test. If “the proof of the pudding is
in the eating”, then your student must be
able to apply what she/he learned in real-
life setting or must be able to come up with
a product as an evidence of learning.
To determine level of
performance, use the scoring
rubrics or check answers against
the answer key, whichever is
applicable?
Reflect on assessment results.
Do not hesitate to use ways of determining how your
students can apply learned facts and concepts which are
more authentic and realistic than that/those given in the
Module.
Reflect on assessment results. Use assessment results
in planning your instruction.
8. How Do You Extend Your Learning? –
As the word implies, this activity is done
outside class hours for enrichment
purposes. This can reinforce lesson
mastery.
Do the task assigned outside
class hours.
Motivate the students to do the task by making clear
what the enrichment activity is about – why it is given,
how it is done, how it relates to the class lesson .
Reflection
It is a good habit to reflect on your teaching for the day – what went well, what did not go well, why this activity went well with this group, why it didn’t
work well with the other group. What are your realizations? What are lessons learned? Jot them down in your diary. Commit them to your memory. If
you do this consistently, you will find your delivery improve substantially.

(Exploratory)
Curriculum Guide for the Exploratory Course on Electrical Installation and Maintenance
For you to get a complete picture of the complete TLE exploratory course on Electrical Installation and Maintenance, you are hereby provided
with the Curriculum Guide on Electrical Installation and Maintenance.
Content Standard Performance Standard
Learning
Competencies
Project/ Activities Assessment Duration
LESSON 1: PREPARE ELECTRICAL MATERIALS AND TOOLS
Demonstrate understanding
of/on:
 Identify supplies,
materials and tools
applicable to a specific
job
 Electrical tools and
equipment
 Electrical supplies
and materials
 Common splices and
joints
 Extension cord
1. Tools and materials are
identified as per job
requirement.
2. Tools are classified according
to their function as per job
requirements.
3. Materials are classified
according to their uses to a
specific project.
selected as per job
requirement.
LO1. Identify
electrical
supplies
materials and
tools
1. Skinning wires using
the following tools:
a. electricians knife,
b. combination
pliers &side
cutting pliers,
c. wire Stripper.
Perform operation
sheet 1.2A
2. Connecting the
skinned wires to the
terminals of:
a. bulb receptacles,
b. switches, and
c. fuse boxes.
Perform operation
sheet 1.2B
3. Perform Splices and
joints,
4. Perform operation
sheet 1.3A,B, Make an
 Written
test
 Performan
ce test
12 hours

(Exploratory)
Learning
Competencies
Extension Cord (see
project plan)
Different types of forms
 Requisition Slip
 Inventory of Materials
Form
 Sample Job order form
 Equipment Borrower’s
Form
1. Needed materials and tools
are listed as per job
requirement.
2. Materials and tools are
requested according to the list
prepared.
3. Requests are done as per
company standard operating
procedures (SOP).
substituted provided required
materials and tools are
unavailable without sacrificing
cost and quality of work.
LO2. Request
appropriate
electrical
supplies
materials and
tools
applicable to a
specific job
1. Identify different types
of forms use in the
shop and explain how
it is being used.
2. Simulate student to
act as tool keeper and
the other is a
borrower.
 Direct
observation
 Written test
 Performanc
e test
 Direct
observation
 Procedures in receiving
and inspecting tools and
materials
 Proper inspection of tools
and materials received.
received and inspected as per
quantity and specification
based on requisition.
checked for damages and
manufacturing defects.
3. Materials and tools received
are handled with appropriate
safety devices.
4. Materials and tools are set
aside to appropriate location
nearest to the workplace.
LO3. Receive and
inspect
electrical
supplies,
materials and
tools
Simulation:
a. One student act
as a supplier and
the other as the
receiver of
supplies
 Direct
observation
 Written test
 Performanc
e test

(Exploratory)
Learning
Competencies
LESSON 2: PERFORM MENSURATIONS AND CALCULATIONS
of/on:
 Measuring tools and
Instruments
 Proper handling of
measuring instruments
 Ohms Law
1. Measuring tools are
selected/classified as per
object to be measured on job
requirements.
2. Measurements are obtained
according to job requirements.
3. Computation for resistance,
current and voltage using
Ohms Law are obtained.
LO1.Select
electrical
measuring
tools and
instruments.
1. measurement of:
a. teachers table,
b. the classroom.
1. Measure the ff.:
a. Voltage of the
outlet,
b. Voltage of a dry
cell battery, and
c. Resistance of
resistors.
 Actual
demonstrati
on
 Direct
observation
 Written test
 Performanc
e test
6 hours
 System of measurement
 English
 Metric
 Converting the unit of
measurement from
English to Metric and
vice versa
 The Multi Tester
 Proper Care and
Maintenance
 How to read the
scale
1. Numerical computations are
self-checked and corrected for
accuracy.
2. Accurate measurements are
obtained according to job
requirements.
3. Identified and converted
systems of measurement
4. Measured work pieces
LO2.Carry out
measurements
and calculations.
Take the following
measurements:
 Teacher’s Table
 Length of Eraser
 Height of Cabinet
3. Reading a
Voltmeter
4. Reading Ohmeter
 Direct
observation
 Written test
 Performanc
e test

(Exploratory)
Learning
Competencies
LESSON 3: INTERPRET TECHNICAL DRAWINGS AND PLANS
of/on:
 Common Electrical
Symbols
 Electrical Signs
1. Electrical symbols and Sign
are identified according to job
specifications.
2. Electrical symbols and Sign
are determined according to
classification or as appropriate
in drawing.
LO1. Analyze
signs,
electrical
symbols and
data.
1. Draw the different
signs commonly used
in the industry in
illustration board or
any hard carton board.
2. Identify the different
electrical symbols
a. Do activity sheet
1.1
 Direct
observation
 Written test
 Performanc
e test
6 hours
 Electrical Wiring Diagram
 Pictorial Diagram
 Schematic Diagram
 Types of Circuit
 Series Circuit
 Parallel Circuit
 Electrical plan
 Quantity of Electrical
Fixture
 Draw Schematics
Diagram Symbols
1. Necessary tools, materials and
equipment are identified
according to the plan.
2. Components, assemblies or
object are recognized as per
job requirement.
3. Dimensions and specification
are identified according to job
requirements.
LO2. Interpret
technical
drawings and
plans.
1. Draw schematic
diagrams (electrical
plan)
 Direct
observation
 Written test
 Performanc
e

(Exploratory)
Learning
Competencies
LESSON 4: MAINTAIN TOOLS AND EQUIPMENT
of/on:
 Classification of Tools
and Equipments
 Hand tools
 Machine/Power Tools
 Basic Maintenance of
Electrical Tools and
Equipment
 Classification of
functional and non-
functional tools
 Methods of Identfying
non-functional tools and
equipment
 Classification of Tools
and equipment according
to their uses
1. Tools and equipment are
identified according to
classification/ specification and
job .requirements.
2. Non-functional tools and
equipment are segregated and
labeled according to
classification.
3. Safety of tools and equipment
are observed in accordance
with manufacturer’s
instructions
4. Conditions of PPE are
checked in accordance with
manufacturer’s instructions.
LO1. Check
condition of
tools and
equipment.
1. Basic Maintenance
of Electrical tools
and Equipment
2. Identify functional and
Non-Functional tools
and Equipment
 Direct
observation
 Written test
 Performanc
e test
8 hours
 Definition of Lubricant
 Types uses of lubricants
 Characteristics of
Lubricant
 Types and uses of
cleaning solvent
 5S Approach in
workshop keeping
1. Lubricants are identified
according to types of
equipment.
lubricated according to
preventive maintenance
schedule or manufacturer’s
specifications.
LO2. Perform basic
preventive
maintenance.
1. Perform cleaning and
lubricating of tools
2. Perform 5’s.
 Direct
observation
 Written test
 Performanc
e test

(Exploratory)
Learning
Competencies
 OSHC workplace
regulations
 Preventive maintenance
techniques and
procedures.
3. Measuring instruments are
checked and calibrated in
accordance with
manufacturer’s instructions.
4. Tools are cleaned and
lubricated according to
standard procedures
5. Defective equipment and tools
are inspected and replaced
according to manufacturer’s
specification.
6. Work place is cleaned and
kept in safe state in line with
OSHC regulations.
 Why maintain Inventory of
Tools and Equipment
 Maintaining and Storing
Hand Tools and Power
Tools and Equipment
 Sample of Proper
Arrangement of Tools and
Equipment
 Tool safe-keeping/storage
1. Inventory of tools, instruments,
and equipment are conducted
and recorded as per company
practices.
2. Tools are inspected, and
replaced if found defective
stored safely in accordance
with manufacturer’s
specifications or company
procedures.
LO3. Store tools
and
equipment.
1. Preparing inventory of
tools and equipment
(Operation Sheet 3.1,
3.2)
 Practical
exam
 Direct
observation
 Written test

(Exploratory)
Learning
Competencies
LESSON 5: PRACTICE OCCUPATIONAL HEALTH AND SAFETY PROCEDURES
of/on:
 Hazards and risks
 What is the difference
between Hazards and
Risks
 Five Basic Workplace
Hazards
 What are examples of
Hazard
 Threshold limit value (TLV)
1. Workplace hazards and risks
are identified and clearly
explained.
2. Hazards/risks and their
corresponding indicators are
identified in with the company
procedures.
3. Contingency measures are
recognized and established in
accordance with organizational
procedures.
LO1. Identify
hazards and
risks.
1. Perform Job Sheet
 Making an internet
research on different
company hazards
and risks.
 Written test 8hours
 What is a Risk
Assessment?
 Threshold limit value (TLV)
 Fire And Explosion
Hazard Assessment
 Philippine Clean Air Act
 Effects of hazards in the
workplace
 Ergonomics
 ECC Regulations
1. Terms of maximum tolerable
limits are identified based on
threshold limit values (TLV).
2. Effects of hazards are
determined.
3. OHS issues and concerns are
identified in accordance with
workplace requirements and
relevant workplace OHS
legislation.
LO2. Evaluate
hazards and
risks.
1. Present a video
regarding workplace
hazards and risk.
2. Simulation depicting
hazards and risks
 Written
test
 Performa
nce test
tion
 Hazard Control
 Identify the Hazard
1. OHS procedures for controlling
hazards and risk are strictly
LO3. Control
hazards and 1. Do activity sheet 3.1
 Written
test

(Exploratory)
Learning
Competencies
 Assess the risk
 Eliminate Hazard and
Risk
 Engineering Control
 Administrative Control
 PPE’s
 Your Health and Safety at
Work
 Workplace First Aid
Facility
 Emergency Preparedness
followed.
2. Procedures in dealing with
workplace accidents, fire and
emergencies are followed in
accordance with the
organization’s OHS policies.
3. Personal protective equipment
(PPE) is correctly used in
accordance with organization’s
OHS procedures and
practices.
4. Procedures in providing
appropriate assistance in the
event of workplace
emergencies are identified in
line with the established
organizational protocol.
risks and
practice
Occupational
Health and
Safety
a. Poster making
on safety rules
and regulations
b. Proper waste
management
exercises
40 hours
“By three methods we may learn wisdom: First, by reflection, which is noblest; second, by imitation, which is
easiest; and third by experience, which is the bitterest.”
- Confucius

Kto12electricalteachersguide 130822014236-phpapp02 (1)

More Related Content

Viewers also liked (14)

Similar to Kto12electricalteachersguide 130822014236-phpapp02 (1) (20)

More from jen Saludar (18)

Kto12electricalteachersguide 130822014236-phpapp02 (1)