Lattelecom Telemetry

Cutting edge solutions for reading
remote measuring devices
www.telemetrija.lv
01/21/15 Productive work and up-to-date management

Today, we don’t just keep track of natural resources – we are also
starting to understand how time and effort goes into monitoring
consumption. That’s why using technology for routine but time
consuming tasks helps utilise resources more efficiently,
and cuts down the time and work require for monitoring.
The result is more productive work and up-to-date management.

Portal
The portal hosts a function for preparing
and monitoring reports and warnings,
which are sent to your smart device or PC.
Thanks to this service, you can remotely read
measuring devices, prepare reports and receive warnings.

DATA SOURCE Lattelecom
INFRASTRUCTURE
THE CLIENT
DATA READING DATA PROCESSING AND
STORAGE
VISUALISATION, MONITORING
AND INFORMING
 Data reading from measuring
instruments, sensors and devices
 Data transmission using
Lattelecom infrastructure via fixed
or wireless connections
 Data storage in cutting edge Tier III
data centres
 Data cloning
 Data processing and validation
 Portal for reviewing data via graphics and tables
 Dynamics, wastage and efficiency reports
 Warning and informing functionality – including
email and SMS
 Unlimited number of users

Options
INFORMATION AND
MEASUREMENTS
REVIEWS AND REPORTS WARNINGS
 Sourcing, processing and
visualisation for a fixed monthly
subscription fee, with no extra
charge for installation and
purchasing equipment
 Payment reports for automatic data
processing – from sourcing to invoicing.
API and connection with accounting
systems are available
 Wastage and efficiency reports for fast,
convenient data on quantities, wastage
and efficiency of consumed resources
 Fast notification via email or SMS
 Warnings regarding exceeding of specific
measurement levels
 Warnings based on historic consumption
dynamics or measurements
 Warnings about device operations

MANUFACTURERS COMMERCIAL PREMISES
 Remote reading of hot and cold water meters
 Reading of heating meters
 Reading of electricity meters
 Reading of cooling meters
 Electricity supply indicators
 Movement sensors
 Reading of water pressure measurements
 Reading of temperature and humidity measurements
 Reading of 48 V voltage measurements
 Movement sensors

APARTMENTS BASEMENTS AND BOILER ROOMS
 Remote reading of heating meters
 Remote reading of water meters
 Reading of water pressure measurements
 Reading of temperature and humidity measurements
 Remote reading of electricity meters
 Remote reading of operational information for devices (boilers,
heating furnaces, pumps etc.)
 Reading of 48 V voltage measurements
 Reading of gas meters

Technical standards
WATER AND HEATING MEASURING DEVICES
 The service operates with utility measurement devices running on the Open Metering System (OMS). OMS allows you to choose from several
manufacturers of meters, so your infrastructure will not be tied to one producer
 The Telemetry service operates within set boundaries – the end point of the telemetry infrastructure is inside the building, so the utilities meter
is under the ownership and management of the service recipient, while the infrastructure for providing the service is under the ownership and
management of SIA Lattelecom
 To use the Telemetry service, utilities meters must meet the requirements stipulated below
Core functionality
……………………………………….………………………………………………………………………………………………………………………..………..
Wired M-Bus (M-Bus)
……………………………………….………………………………………………………………………………………………………………………..………..
Wireless M-Bus (wM-Bus)
……………………………………….………………………………………………………………………………………………………………………..………..
M-Bus application protocol
Support from AMR (Automatic Meter Readout) system, known as OMS
(Open Metering System)
Communication via two-line M-Bus connection [EN13757-2]
Communication via M-Bus RF [EN13757-4];5 or T mode *; 868Mhz frequency
In accordance with [EN 13757-3]

Technical standards
WATER PRESSURE METER
Water pressure sensors must support output signal type 0-10 V,
supply voltage 15-30 V and must have electrical connection type Pg9, EN 175301-803-A)
READING INFORMATION FROM DEVICES
Readings can be made using a device’s digital output (without supply voltage) or from an analogous
input with voltage 0 to 60 VDC
In exceptional cases closed or open status reports can be read in other ways (for example, if ~ 220
VAC is used from the client’s device’s accident report or if supply voltage is used – maximum output
voltage for digital output +5.5 VDC)

Service
RELIABILITY MOBILITY SECURITY
 99% connection stability, qualitative
and fast data connection up to 1 GB/s
 24/7 Lattelecom service support and
device restoration throughout the
service provision period
 The service can be used
by devices running on
Android or iOS operating
systems
 Receive warnings via
email or SMS
 Data storage in the most modern and secure data
centres in Northern Europe, ensuring maximum
protection against data loss
 Three-level accounts data cloning, unlimited data
archive throughout the service provision period

How much does it cost and
1. To learn more about our standard service price offer and terms www.telemetrija.lv
2. Speak to your individual customer relations manager or
3. Call +371 67 177 177
How do I purchase it?
There are several ways of receiving the service to suit your wishes and needs:

www.telemetrija.lv
+371 67 177 177
Thank You!

Lattelecom Telemetry

More Related Content

What's hot (20)

Similar to Lattelecom Telemetry (20)

Recently uploaded (20)

Lattelecom Telemetry