SlideShare a Scribd company logo
ISOTONIC SOLUTIONS
PHYSICAL PHARMACY I
LEC 6
ASSISTANT LECTURER
DR AHMAD A YOSEF
MSC PHARMACEUTICAL SCIENCES
1
ISOTONIC SOLUTIONS
"When two solutions have same osmotic pressure and salt
concentration are said to be isotonic solutions”. Iso (same)
and tonic (concentration )
.
Physiologically, solutions having the
isotonic solutions are
pressure as that of the body fluids when
same osmotic
separated by a biological membrane. Biological fluids
including blood and lachrymal fluid normally have an osmotic
pressure corresponding to that of 0.9% w/v solution of sodium
chloride. Thus 0.9% solution of sodium chloride is said to be
isotonic with the physiological fluids.
2
In addition, to carrying out pH adjustments, pharmaceutical
solutions that are meant for application to delicate membranes of
the body should also be adjusted to approximately the same
osmotic pressure as that of body fluids. Isotonic solutions cause no
swelling or contraction of the tissues with which they come in
contact, and produce no discomfort when instilled in the eye,
nasal tract, blood or other body tissues. Isotonic sodium chloride
is a familiar pharmaceutical example of such a preparation.
0.9% w/v solution of NaCl has essentially the same concentration
and osmotic pressure as the RBCs contents. Thus it is said to be
isotonic with blood, and is also known as " Physiological Saline
solution", or "Normal saline solution"
If RBCs are suspended in 0.9% solution of NaCl, they undergo no
change in their size and shape due to isotonicity.
3
HYPERTONIC SOLUTION
"A hyper-tonic solution is one that has greater concentration
than reference solution (i.e. RBCs Contents )
.
"
A hyper-tonic solution has greater osmotic pressure than that
of reference solution.
If RBCs are suspended in 2% w/v solution of NaCl (i.e.
hypertonic solution), then water present within the RBCs will
come out (i.e. due to osmosis, from dilute RBCs fluid to
concentrated hypertonic solution) into the surroundings to
dilute the NaCl solution (hypertonic solution). This exit of
water from RBCs causes their shrinkage and RBCs become
wrinkled in shape. This shrinkage of RBCs is known as
"Plasmolysis "
.
4
HYPOTONIC SOLUTION
"A hypo tonic solution is one that has lower concentration than
reference solution (i.e. RBCs contents )
.
A hypo-tonic solution has lower osmotic pressure than that of
reference solution.
If RBCs are suspended in 0.1 % w/v solution of NaCl (i.e.
hypotonic solution), then water from this solution will enter the
RBCs (i.e. due to osmosis, from dilute hypotonic solution to RBCs
fluid) to dilute the fluid within the RBCs causing their swelling,
which may later result in rupturing of RBCs and release of
haemoglobin. This rupturing of RBCs is known as "Haemolysis”
5
ISO-OSMOTIC OR ISOSMOTIC SOLUTIONS
"Solutions having the same osmotic pressure but
not necessarily the same concentration are said
to be iso-osmotic or isosmotic solutions .
"
E.g. 2% w/v solution of boric acid has the same
osmotic pressure as 0.9% w/v solution of NaCI but
not the same concentration. So, both solutions
are iso-osmotic but not iso-tonic.
6
MEASUREMENT OF
TONICITY
7
The tonicity of solutions may
be determined by one of the
following two methods:
1) Haemolytic Method.
2) Colligative Method
8
HAEMOLYTIC METHOD:
The acting principle of this method is the observation of the
effect of various solutions of drugs on the appearance of RBCs
when suspended in those solutions. If, there is no change in
size and shape of RBCs when immersed in test solution on
observing with microscope, then this solution is isotonic to the
blood.
This method can be made more accurate by using a hematocrit,
which is a centrifuge head in which a graduated capillary tube
is held in each of the two arms.
9
One capillary tube (tube A) is filled with blood diluted with
5 ml of 0.9% w/v NaCI (isotonic solution.)
The other capillary tube (tube B) is filled with blood
diluted with an equal volume i.e. 5ml of test solution.
Both tubes are centrifuged (i.e. rotated at high speed.)
After centrifuge, the blood cells are concentrated at one
end of the capillary tubes and the volume occupied by the
cells (i.e. PCV -Packed Cell Volume) is measured.
Finally, the PCV of test solution tube (tube B) is compared
with PCV of isotonic solution tube (tube A), and following
inferences are made.
10
RESULTS:
If PCV of test solution (tube B) is same as that of tube A,
then test solution is regarded as isotonic.
If RBCs volume (i.e. PCV) of tube is more than that of tube
A, then test solution is regarded as hypotonic solution
(increase in PCV is due to swelling of RBCs, which occurs in
case of hypotonic solution )
.
If RBCs volume (i.e. PCV) of tube is less than that of tube A,
then test solution is regarded as hypertonic solution
(decrease in PCV is due to shrinkage of RBCs, which occurs
in case of hypertonic solution )
.
11
COLLIGATIVE METHOD:
It has been determined that solutions having same tonicity
exhibit similar behavior with respect to their colligative
properties such as lowering of vapour pressure, depression in
freezing point, etc. Hence, tonicity of a solution may be
determined by determining its colligative properties.
For making isotonic solutions, the quantities of substances to be
added may be calculated by following methods:
Based on molecular concentration
Based on freezing point data
Based on sodium chloride equivalent (E) value
White-Vincent method
12
BASED ON MOLECULAR
CONCENTRATION
%1molecular concentration:
If one gram molecule (i.e. one gram molecular weight) of a
substance is dissolved in 100 ml of water, the resulting solution
will be of 1% molecular concentration. For example, the
molecular weight of boric acid is 62, so if 62 gms (i.e. one gram
molecular weight) of boric acid is dissolved in 100 ml of water,
the resulting solution will have 1% molecular concentration.
For non-ionizing substance, an aqueous solution having 1%
molecular concentration, depresses the freezing point to - 18.6
C°, and freezing point of plasma is - 0.52 C°. So, by using this
information, we can calculate the molecular concentration of
blood plasma as follows;
13
A depression of - 18.6 C° in freezing point of solution is due
to = 1% Molecular concentration
A depression of 1 C° in freezing point of solution is due to =
1 / - 18.6 % Molecular concentration
A depression of - 0.52C° in freezing point of plasma is due
to = 1 /- 18.6 x - 0.52
=
0.03% Molecular concentration
So, molecular concentration of plasma is 0.03%. Therefore,
any solution having the molecular concentration of 0.03%
will be isotonic with blood (having the same concentration -
which means isotonic )
.
14
The formula for calculating the w/v percent of ionizing and
non-ionizing substances required to make isotonic solutions
with blood plasma is as follows;
For non-ionizing substances
W / V % of substance required = 0.03% x Gram molecular
weight
For ionizing substances
W/V % of substance required = 0.03% x Gram molecular
weight / no. of ions yielded by the molecule
15
FIND THE PROPORTION OF BORIC ACID REQUIRED TO
MAKE A SOLUTION ISOTONIC. THE MOLECULAR WEIGHT OF
BORIC ACID IS 62, AND IT IS A NON-IONIZING SUBSTANCE
 Solution:
 By applying formulae for non-ionizing substances;
 W/V % of boric acid required to make isotonic solution =
0.03% x gram molecular weight
 =
0.03 x 62 = 1.86
 So, 1.86 gms of boric acid is required to make 100ml
isotonic solution.
16
FIND THE PROPORTION OF SODIUM SULPHATE
REQUIRED TO MAKE A SOLUTION ISOTONIC. THE
MOLECULAR WEIGHT BORIC OF SODIUM SULPHATE
IS 148, AND IT IS AN IONIZING SUBSTANCE.
By applying formulae for ionizing substances;
W/V % of ionizing substance required to make isotonic solution = 0.03% x
gram molecular weight / no. of ions
• Na2SO4 —> 2Na + SO4
So, total no. of ions produced by sodium sulphate = 3
W/V % of Na2SO4 required to make isotonic solution = 0.03% x gram
molecular weight / no. of ions
=
0.03
% x 148 / 3 = 1.48
S0, 1.48 gm of sodium sulphate is required to make 100ml isotonic
solution.
17
BASED ON FREEZING POINT DATA
Body fluids such as blood plasma and lachrymal secretions have a
freezing point of - 0.52 C° due to different solutes present in them.
0.9% solution of NaCI (isotonic solution) also has freezing point of
-
0.52 C . Hence, all solutions which freeze at - 0.52 C° will be isotonic
with these fluids.
Adjustment to the tonicity of solutions is simplified if the freezing
point of 1% solution of substance whose tonicity is to be adjusted (i.e.
unadjusted solution) and freezing point of 1% solution of adjusting
substance are known. The freezing points are usually expressed in
terms of 1% solution which can be noted from the reference table.
18
The quantity of the adjusting substance needed for
making the solution isotonic with blood may be
calculated from the general formula given below;
Amount of adjusting substance required = - 0.52 -a /b
Where,
a = freezing point of 1% solution of un-adjusted solution
b = freezing point of 1% solution of adjusting substance
19
Find the amount of sodium chloride required to render 1%
solution of cocaine hydrochloride isotonic with blood plasma. The
freezing point of 1% w/v solution of cocaine hydrochloride is
-
0.09 C°, and that of 1% NaCI is-0.576 C °
.
In this example,
Unadjusted solution (whose tonicity is to be adjusted) is 1% cocaine HCI
Adjusting substance is NaCI
Freezing point of 1% w/v solution of cocaine HCI (unadjusted solution) = a = - 0.09 C°
Freezing point of 1% w/v solution of NaCI (adjusting substance) = b = - 0.576 C°
Amount of adjusting substance required = - 0.52 -a /b
=
-
0.52
-
(
-
0.09
)
/
-
0.576
=
0.746 gms
Hence, by adding 0.746 gms of NoCI in 1% cocaine HCI solution, the final solution
becomes isotonic.
20
BASED ON SODIUM CHLORIDE
EQUIVALENT (E)
Sodium chloride equivalent i.e. (E) of a drug is defined as;
"The grams of Sodium chloride that will produce the same osmotic effect as
1 gm of that drug".
For example, potassium chloride has sodium chloride equivalent (E) value of
0.76gm NaCI / gm of KCI-. This means 0.76 gm of NaCI produce the same
osmotic effect as 1 gm of KCI.
To make a solution of a particular drug isotonic with blood plasma, the sodium
choride equivalent value (E) of that drug is noted from the reference table.
This E value is multiplied with the %age of the drug solution, and result so
obtained is subtracted from 0.9%. The difference in value so obtained is the
amount of NaCI needed to adjust the tonicity of the solution to isotonic
value.
Amount of NaCI required = 0.9% - {%age of solution x E)
21
Find the amount of sodium chloride needed to make a -
solution of 0.5% of KCI isotonic with blood plasma. Sodium
chloride equivalent value (E) of KCI is 0.76
.
Given solution (not isotonic) = 0.5% KCI
E value of KCI = 0.76 So, by applying formula,
Amount of NaCI required = 0.9 - (%age of drug x E)
= 0.9-(0.5 x 0.76
)
= 0.9 -0.38 = 0.52 gm —> Hence, 0.52 gm of NaCI
must be added in 0.5% KCI solution to make it
isotonic.
22
WHITE-VINCENT METHOD
This method involves the addition of water to the given
amount of drug to make isotonic solution, followed by the
addition of some other isotonic solution (e.g. 0.9% NaCI) to
make the final volume.
The volume of water that should be added in given amount of
drug to make isotonic solution is calculated by using following
formula;
V = W x E x 111.1
Where, V = volume of water needed to make isotonic solution
W = given weight of drug in grams
E = NaCI equivalent value of drug
111.1
= constant
23
MAKE 50ML ISOTONIC SOLUTION FROM 0.5 GM OF
BORIC ACID. E VALUE OF BORIC ACID IS 0.50
.
Given amount of boric acid = 0.5 gm
Required volume = 50 ml*
E value of boric acid = 0.50
Firstly, we calculate the amount of water that should be added in 0.5 gm of
boric acid to make isotonic solution by using formula,
V= W x E x 111.1
V = 0.5 x 0.5 x 111.1 = 27.8 ml
So, 0.5 gm of boric acid is dissolved in 27.8 ml of water to make isotonic
solution.
BUT
, final volume that is required is 50 ml. so, remaining 22.2ml (50 - 27.8 =
22.2) of some other isotonic solution (e.g. 0.9% NaCI) are added to make up
final 50 ml volume.
24
25

More Related Content

PDF
Semisolid dosage forms: Paste and Jellies
PPTX
Posology
PPTX
Buffers-----(Pharmaceutics)
PPT
Monophasic liquid dosage forms part 4
PPTX
Liniments Presentation
PPTX
To prepare and submit Piperazine Citrate Elixir B.P. WPS Office.pptx
PPTX
pH, BUFFERS & ISOTONIC SOLUTIONS.pptx
Semisolid dosage forms: Paste and Jellies
Posology
Buffers-----(Pharmaceutics)
Monophasic liquid dosage forms part 4
Liniments Presentation
To prepare and submit Piperazine Citrate Elixir B.P. WPS Office.pptx
pH, BUFFERS & ISOTONIC SOLUTIONS.pptx

What's hot (20)

PPTX
Classification of powders
PPTX
Isotonic and buffer solutions
PPTX
Pharmaceuticals calculations ppt
PDF
Precepitation titration mohrs method
PPTX
Monophasic liquid dosage form
PPTX
Simple Syrup Pharmaceutics I practical WPS Office.pptx
DOCX
Introduction to liniment and turpentine liniment
PPTX
Pharmaceutics Unit -1.pptx
PPTX
Gastrointestinal agents
PPT
Semi solid dosage form
PPTX
Pharmaceutical Elixirs
PPTX
Dental products
PPTX
Pastes, plasters and glycerogelatins
PPTX
Suspension (BLDF)
PPTX
Primary and secondary standards
PDF
Posology, doses calculations,pharmacist, important topic of pharma, doses cal...
PPTX
Practical notes for Pharmacy (Synopsis and viva questions included) reference...
PPTX
Preparation of suppository
PPTX
Experiment no. 3 Limit test for Iron.pptx
PPTX
Alkalimetry and acidimetry
Classification of powders
Isotonic and buffer solutions
Pharmaceuticals calculations ppt
Precepitation titration mohrs method
Monophasic liquid dosage form
Simple Syrup Pharmaceutics I practical WPS Office.pptx
Introduction to liniment and turpentine liniment
Pharmaceutics Unit -1.pptx
Gastrointestinal agents
Semi solid dosage form
Pharmaceutical Elixirs
Dental products
Pastes, plasters and glycerogelatins
Suspension (BLDF)
Primary and secondary standards
Posology, doses calculations,pharmacist, important topic of pharma, doses cal...
Practical notes for Pharmacy (Synopsis and viva questions included) reference...
Preparation of suppository
Experiment no. 3 Limit test for Iron.pptx
Alkalimetry and acidimetry
Ad

Similar to Lec 6 isotonic solutions (20)

PPTX
Isotonic solutions-----(Pharmaceutics)
PPTX
Isotonic solutions
PPTX
ISOTONICITY
PPTX
Isotonic solutions
PPTX
Lecture . One (isotonic solution ).pptx
PPTX
Buffered isotonic solutions
PPTX
MUCLecture_2022_5201348888888888888888888888888888888888888888823.pptx
PDF
4 2018 02_06!11_32_06_am
PDF
Physical properties of drug molecules sb
PPTX
Chapter 3 - slides practica de termodinamica
PDF
Unit ii - 09-10-20
PPTX
Volumetric Analysis ( Titrimetric analysis) or Titration
PPTX
PPTX
Antihistaminics
PDF
Physical Pharmacy-I Lab MANIK
DOCX
Solutions and Buffers
PDF
buffer solutions.pptx.pdfhahsbshsbhshshj
PDF
lab manual final
PDF
lab manual MANIK
Isotonic solutions-----(Pharmaceutics)
Isotonic solutions
ISOTONICITY
Isotonic solutions
Lecture . One (isotonic solution ).pptx
Buffered isotonic solutions
MUCLecture_2022_5201348888888888888888888888888888888888888888823.pptx
4 2018 02_06!11_32_06_am
Physical properties of drug molecules sb
Chapter 3 - slides practica de termodinamica
Unit ii - 09-10-20
Volumetric Analysis ( Titrimetric analysis) or Titration
Antihistaminics
Physical Pharmacy-I Lab MANIK
Solutions and Buffers
buffer solutions.pptx.pdfhahsbshsbhshshj
lab manual final
lab manual MANIK
Ad

More from Dr Ahmad Abdulhusiaan Yosef (20)

PDF
Dispersion system
PDF
Chemical kinetics review
PDF
Milling Pharmaceutical Industry
PDF
Mixing in Pharmaceutical Industry
PDF
6 Factors affecting drug absorption 4th
PDF
2 Bioavailablity 4th
PDF
1 Biopharmaceutics 4th
PPTX
Lec 1 state of matter p2
PPTX
Lec 1 state of matter p1
PDF
Kinetics 4 physical pharmacy lab
PDF
Solubility of aspirin 2 Physical Pharmacy Lab
PDF
Solubility 1 physical pharmacy Lab
PDF
Partition coefficient 7 (Physical Pharmacy Lab)
PDF
Surface active agent 5 Physical Pharmacy Lab
PDF
Supercritical Fluid
PDF
Formulation and development of garcinia indica nano suspension
PDF
Food and beverage biotechnology 2020
PDF
New methods of solubility
PDF
Hybrid Liposomes
Dispersion system
Chemical kinetics review
Milling Pharmaceutical Industry
Mixing in Pharmaceutical Industry
6 Factors affecting drug absorption 4th
2 Bioavailablity 4th
1 Biopharmaceutics 4th
Lec 1 state of matter p2
Lec 1 state of matter p1
Kinetics 4 physical pharmacy lab
Solubility of aspirin 2 Physical Pharmacy Lab
Solubility 1 physical pharmacy Lab
Partition coefficient 7 (Physical Pharmacy Lab)
Surface active agent 5 Physical Pharmacy Lab
Supercritical Fluid
Formulation and development of garcinia indica nano suspension
Food and beverage biotechnology 2020
New methods of solubility
Hybrid Liposomes

Recently uploaded (20)

PPTX
Introduction to Medical Microbiology for 400L Medical Students
PPTX
Post Op complications in general surgery
PDF
OSCE SERIES ( Questions & Answers ) - Set 5.pdf
PPT
Infections Member of Royal College of Physicians.ppt
PPTX
Reading between the Rings: Imaging in Brain Infections
PPTX
Radiation Dose Management for Patients in Medical Imaging- Avinesh Shrestha
PDF
Calcified coronary lesions management tips and tricks
PDF
B C German Homoeopathy Medicineby Dr Brij Mohan Prasad
PDF
OSCE SERIES - Set 7 ( Questions & Answers ).pdf
PDF
AGE(Acute Gastroenteritis)pdf. Specific.
PDF
04 dr. Rahajeng - dr.rahajeng-KOGI XIX 2025-ed1.pdf
DOCX
PEADIATRICS NOTES.docx lecture notes for medical students
PPTX
Electrolyte Disturbance in Paediatric - Nitthi.pptx
PDF
Transcultural that can help you someday.
PDF
Comparison of Swim-Up and Microfluidic Sperm Sorting.pdf
PDF
OSCE Series Set 1 ( Questions & Answers ).pdf
PPTX
Human Reproduction: Anatomy, Physiology & Clinical Insights.pptx
PPTX
09. Diabetes in Pregnancy/ gestational.pptx
PDF
Lecture on Anesthesia for ENT surgery 2025pptx.pdf
PPTX
HYPERSENSITIVITY REACTIONS - Pathophysiology Notes for Second Year Pharm D St...
Introduction to Medical Microbiology for 400L Medical Students
Post Op complications in general surgery
OSCE SERIES ( Questions & Answers ) - Set 5.pdf
Infections Member of Royal College of Physicians.ppt
Reading between the Rings: Imaging in Brain Infections
Radiation Dose Management for Patients in Medical Imaging- Avinesh Shrestha
Calcified coronary lesions management tips and tricks
B C German Homoeopathy Medicineby Dr Brij Mohan Prasad
OSCE SERIES - Set 7 ( Questions & Answers ).pdf
AGE(Acute Gastroenteritis)pdf. Specific.
04 dr. Rahajeng - dr.rahajeng-KOGI XIX 2025-ed1.pdf
PEADIATRICS NOTES.docx lecture notes for medical students
Electrolyte Disturbance in Paediatric - Nitthi.pptx
Transcultural that can help you someday.
Comparison of Swim-Up and Microfluidic Sperm Sorting.pdf
OSCE Series Set 1 ( Questions & Answers ).pdf
Human Reproduction: Anatomy, Physiology & Clinical Insights.pptx
09. Diabetes in Pregnancy/ gestational.pptx
Lecture on Anesthesia for ENT surgery 2025pptx.pdf
HYPERSENSITIVITY REACTIONS - Pathophysiology Notes for Second Year Pharm D St...

Lec 6 isotonic solutions

  • 1. ISOTONIC SOLUTIONS PHYSICAL PHARMACY I LEC 6 ASSISTANT LECTURER DR AHMAD A YOSEF MSC PHARMACEUTICAL SCIENCES 1
  • 2. ISOTONIC SOLUTIONS "When two solutions have same osmotic pressure and salt concentration are said to be isotonic solutions”. Iso (same) and tonic (concentration ) . Physiologically, solutions having the isotonic solutions are pressure as that of the body fluids when same osmotic separated by a biological membrane. Biological fluids including blood and lachrymal fluid normally have an osmotic pressure corresponding to that of 0.9% w/v solution of sodium chloride. Thus 0.9% solution of sodium chloride is said to be isotonic with the physiological fluids. 2
  • 3. In addition, to carrying out pH adjustments, pharmaceutical solutions that are meant for application to delicate membranes of the body should also be adjusted to approximately the same osmotic pressure as that of body fluids. Isotonic solutions cause no swelling or contraction of the tissues with which they come in contact, and produce no discomfort when instilled in the eye, nasal tract, blood or other body tissues. Isotonic sodium chloride is a familiar pharmaceutical example of such a preparation. 0.9% w/v solution of NaCl has essentially the same concentration and osmotic pressure as the RBCs contents. Thus it is said to be isotonic with blood, and is also known as " Physiological Saline solution", or "Normal saline solution" If RBCs are suspended in 0.9% solution of NaCl, they undergo no change in their size and shape due to isotonicity. 3
  • 4. HYPERTONIC SOLUTION "A hyper-tonic solution is one that has greater concentration than reference solution (i.e. RBCs Contents ) . " A hyper-tonic solution has greater osmotic pressure than that of reference solution. If RBCs are suspended in 2% w/v solution of NaCl (i.e. hypertonic solution), then water present within the RBCs will come out (i.e. due to osmosis, from dilute RBCs fluid to concentrated hypertonic solution) into the surroundings to dilute the NaCl solution (hypertonic solution). This exit of water from RBCs causes their shrinkage and RBCs become wrinkled in shape. This shrinkage of RBCs is known as "Plasmolysis " . 4
  • 5. HYPOTONIC SOLUTION "A hypo tonic solution is one that has lower concentration than reference solution (i.e. RBCs contents ) . A hypo-tonic solution has lower osmotic pressure than that of reference solution. If RBCs are suspended in 0.1 % w/v solution of NaCl (i.e. hypotonic solution), then water from this solution will enter the RBCs (i.e. due to osmosis, from dilute hypotonic solution to RBCs fluid) to dilute the fluid within the RBCs causing their swelling, which may later result in rupturing of RBCs and release of haemoglobin. This rupturing of RBCs is known as "Haemolysis” 5
  • 6. ISO-OSMOTIC OR ISOSMOTIC SOLUTIONS "Solutions having the same osmotic pressure but not necessarily the same concentration are said to be iso-osmotic or isosmotic solutions . " E.g. 2% w/v solution of boric acid has the same osmotic pressure as 0.9% w/v solution of NaCI but not the same concentration. So, both solutions are iso-osmotic but not iso-tonic. 6
  • 8. The tonicity of solutions may be determined by one of the following two methods: 1) Haemolytic Method. 2) Colligative Method 8
  • 9. HAEMOLYTIC METHOD: The acting principle of this method is the observation of the effect of various solutions of drugs on the appearance of RBCs when suspended in those solutions. If, there is no change in size and shape of RBCs when immersed in test solution on observing with microscope, then this solution is isotonic to the blood. This method can be made more accurate by using a hematocrit, which is a centrifuge head in which a graduated capillary tube is held in each of the two arms. 9
  • 10. One capillary tube (tube A) is filled with blood diluted with 5 ml of 0.9% w/v NaCI (isotonic solution.) The other capillary tube (tube B) is filled with blood diluted with an equal volume i.e. 5ml of test solution. Both tubes are centrifuged (i.e. rotated at high speed.) After centrifuge, the blood cells are concentrated at one end of the capillary tubes and the volume occupied by the cells (i.e. PCV -Packed Cell Volume) is measured. Finally, the PCV of test solution tube (tube B) is compared with PCV of isotonic solution tube (tube A), and following inferences are made. 10
  • 11. RESULTS: If PCV of test solution (tube B) is same as that of tube A, then test solution is regarded as isotonic. If RBCs volume (i.e. PCV) of tube is more than that of tube A, then test solution is regarded as hypotonic solution (increase in PCV is due to swelling of RBCs, which occurs in case of hypotonic solution ) . If RBCs volume (i.e. PCV) of tube is less than that of tube A, then test solution is regarded as hypertonic solution (decrease in PCV is due to shrinkage of RBCs, which occurs in case of hypertonic solution ) . 11
  • 12. COLLIGATIVE METHOD: It has been determined that solutions having same tonicity exhibit similar behavior with respect to their colligative properties such as lowering of vapour pressure, depression in freezing point, etc. Hence, tonicity of a solution may be determined by determining its colligative properties. For making isotonic solutions, the quantities of substances to be added may be calculated by following methods: Based on molecular concentration Based on freezing point data Based on sodium chloride equivalent (E) value White-Vincent method 12
  • 13. BASED ON MOLECULAR CONCENTRATION %1molecular concentration: If one gram molecule (i.e. one gram molecular weight) of a substance is dissolved in 100 ml of water, the resulting solution will be of 1% molecular concentration. For example, the molecular weight of boric acid is 62, so if 62 gms (i.e. one gram molecular weight) of boric acid is dissolved in 100 ml of water, the resulting solution will have 1% molecular concentration. For non-ionizing substance, an aqueous solution having 1% molecular concentration, depresses the freezing point to - 18.6 C°, and freezing point of plasma is - 0.52 C°. So, by using this information, we can calculate the molecular concentration of blood plasma as follows; 13
  • 14. A depression of - 18.6 C° in freezing point of solution is due to = 1% Molecular concentration A depression of 1 C° in freezing point of solution is due to = 1 / - 18.6 % Molecular concentration A depression of - 0.52C° in freezing point of plasma is due to = 1 /- 18.6 x - 0.52 = 0.03% Molecular concentration So, molecular concentration of plasma is 0.03%. Therefore, any solution having the molecular concentration of 0.03% will be isotonic with blood (having the same concentration - which means isotonic ) . 14
  • 15. The formula for calculating the w/v percent of ionizing and non-ionizing substances required to make isotonic solutions with blood plasma is as follows; For non-ionizing substances W / V % of substance required = 0.03% x Gram molecular weight For ionizing substances W/V % of substance required = 0.03% x Gram molecular weight / no. of ions yielded by the molecule 15
  • 16. FIND THE PROPORTION OF BORIC ACID REQUIRED TO MAKE A SOLUTION ISOTONIC. THE MOLECULAR WEIGHT OF BORIC ACID IS 62, AND IT IS A NON-IONIZING SUBSTANCE  Solution:  By applying formulae for non-ionizing substances;  W/V % of boric acid required to make isotonic solution = 0.03% x gram molecular weight  = 0.03 x 62 = 1.86  So, 1.86 gms of boric acid is required to make 100ml isotonic solution. 16
  • 17. FIND THE PROPORTION OF SODIUM SULPHATE REQUIRED TO MAKE A SOLUTION ISOTONIC. THE MOLECULAR WEIGHT BORIC OF SODIUM SULPHATE IS 148, AND IT IS AN IONIZING SUBSTANCE. By applying formulae for ionizing substances; W/V % of ionizing substance required to make isotonic solution = 0.03% x gram molecular weight / no. of ions • Na2SO4 —> 2Na + SO4 So, total no. of ions produced by sodium sulphate = 3 W/V % of Na2SO4 required to make isotonic solution = 0.03% x gram molecular weight / no. of ions = 0.03 % x 148 / 3 = 1.48 S0, 1.48 gm of sodium sulphate is required to make 100ml isotonic solution. 17
  • 18. BASED ON FREEZING POINT DATA Body fluids such as blood plasma and lachrymal secretions have a freezing point of - 0.52 C° due to different solutes present in them. 0.9% solution of NaCI (isotonic solution) also has freezing point of - 0.52 C . Hence, all solutions which freeze at - 0.52 C° will be isotonic with these fluids. Adjustment to the tonicity of solutions is simplified if the freezing point of 1% solution of substance whose tonicity is to be adjusted (i.e. unadjusted solution) and freezing point of 1% solution of adjusting substance are known. The freezing points are usually expressed in terms of 1% solution which can be noted from the reference table. 18
  • 19. The quantity of the adjusting substance needed for making the solution isotonic with blood may be calculated from the general formula given below; Amount of adjusting substance required = - 0.52 -a /b Where, a = freezing point of 1% solution of un-adjusted solution b = freezing point of 1% solution of adjusting substance 19
  • 20. Find the amount of sodium chloride required to render 1% solution of cocaine hydrochloride isotonic with blood plasma. The freezing point of 1% w/v solution of cocaine hydrochloride is - 0.09 C°, and that of 1% NaCI is-0.576 C ° . In this example, Unadjusted solution (whose tonicity is to be adjusted) is 1% cocaine HCI Adjusting substance is NaCI Freezing point of 1% w/v solution of cocaine HCI (unadjusted solution) = a = - 0.09 C° Freezing point of 1% w/v solution of NaCI (adjusting substance) = b = - 0.576 C° Amount of adjusting substance required = - 0.52 -a /b = - 0.52 - ( - 0.09 ) / - 0.576 = 0.746 gms Hence, by adding 0.746 gms of NoCI in 1% cocaine HCI solution, the final solution becomes isotonic. 20
  • 21. BASED ON SODIUM CHLORIDE EQUIVALENT (E) Sodium chloride equivalent i.e. (E) of a drug is defined as; "The grams of Sodium chloride that will produce the same osmotic effect as 1 gm of that drug". For example, potassium chloride has sodium chloride equivalent (E) value of 0.76gm NaCI / gm of KCI-. This means 0.76 gm of NaCI produce the same osmotic effect as 1 gm of KCI. To make a solution of a particular drug isotonic with blood plasma, the sodium choride equivalent value (E) of that drug is noted from the reference table. This E value is multiplied with the %age of the drug solution, and result so obtained is subtracted from 0.9%. The difference in value so obtained is the amount of NaCI needed to adjust the tonicity of the solution to isotonic value. Amount of NaCI required = 0.9% - {%age of solution x E) 21
  • 22. Find the amount of sodium chloride needed to make a - solution of 0.5% of KCI isotonic with blood plasma. Sodium chloride equivalent value (E) of KCI is 0.76 . Given solution (not isotonic) = 0.5% KCI E value of KCI = 0.76 So, by applying formula, Amount of NaCI required = 0.9 - (%age of drug x E) = 0.9-(0.5 x 0.76 ) = 0.9 -0.38 = 0.52 gm —> Hence, 0.52 gm of NaCI must be added in 0.5% KCI solution to make it isotonic. 22
  • 23. WHITE-VINCENT METHOD This method involves the addition of water to the given amount of drug to make isotonic solution, followed by the addition of some other isotonic solution (e.g. 0.9% NaCI) to make the final volume. The volume of water that should be added in given amount of drug to make isotonic solution is calculated by using following formula; V = W x E x 111.1 Where, V = volume of water needed to make isotonic solution W = given weight of drug in grams E = NaCI equivalent value of drug 111.1 = constant 23
  • 24. MAKE 50ML ISOTONIC SOLUTION FROM 0.5 GM OF BORIC ACID. E VALUE OF BORIC ACID IS 0.50 . Given amount of boric acid = 0.5 gm Required volume = 50 ml* E value of boric acid = 0.50 Firstly, we calculate the amount of water that should be added in 0.5 gm of boric acid to make isotonic solution by using formula, V= W x E x 111.1 V = 0.5 x 0.5 x 111.1 = 27.8 ml So, 0.5 gm of boric acid is dissolved in 27.8 ml of water to make isotonic solution. BUT , final volume that is required is 50 ml. so, remaining 22.2ml (50 - 27.8 = 22.2) of some other isotonic solution (e.g. 0.9% NaCI) are added to make up final 50 ml volume. 24
  • 25. 25