limit test for lead
Download as PPTX, PDF6 likes14,355 views
The document describes the limit test for lead, which determines the allowable limit of heavy metal lead in a sample. The test involves reacting the sample with dithizone, which forms a violet-colored lead dithizonate complex in the presence of lead. The intensity of color in the sample is compared to that of a standard lead solution treated the same way. If the sample solution is less colored than the standard, the sample passes the lead limit test. The test is useful for detecting trace amounts of lead impurity from sources like equipment, storage containers, or packaging materials used during manufacturing or storage of medical compounds.
limit test for lead
- 1. LIMIT TEST FOR LEAD BY PROF. TAUFIK MULLA ASSISTANT PROFESSOR DEPARTMENT OF PHARMACEUTICS SPBC COLLEGE OF PHARMACY.
- 2. LIMIT TEST FOR LEAD The Lead Limit Test is designed to determine the allowable limit of heavy metal i.e. Lead contained in a sample. • Lead is a most undesirable impurity in medical compounds and comes through use of sulphuric acid, lead lined apparatus and glass bottles used for storage of chemicals. • Common sources of lead impurities are: Equipment used for manufacturing. Storage container. From packaging material
- 3. • Principle • Limit test of lead is based on the reaction of lead and diphenyl thiocarbazone (dithizone) in alkaline solution to form lead dithizonate complex which is violet in color. • Lead present as an impurity in the sample reacts with dithizone to form lead thizonate which is responsible for the appearance of violet color in the solution. This reaction will only occur if the given sample contains lead as an impurity even in trace amount.
- 4. • In this test, Nessler cylinders are not used, instead it is performed by extraction with the help of separating funnel. • The original color of dithizone in chloroform is green while the lead dithizonate complex is violet in color. The intensity of the violet color of the complex depending upon the quantity of lead present in the solution is compared with that of the standard color produced by treating standard solution containing definite amount of lead in the similar manner. Intensity of this violet color is compared in both the tests and standard solution in a chloroform solvent medium.
- 5. PROCEDURE TEST SAMPLE STANDARD SAMPLE REASON Take a sample and transferred in separating funnel Take standard lead solution and transferred in separating funnel. To check impurity of lead present in sample or not Add 6ml Ammonium citrate Add 6ml Ammonium citrate To maintain optimum pH Add 2ml potassium cyanide and 2ml hydroxylamine hydrochloride Add 2ml potassium cyanide and 2ml hydroxylamine hydrochloride Cyanide for complex with all interfering metal in solution Add 2 drop phenol red Add 2 drop phenol drop Act as indicator to develop color Make solution alkaline by adding ammonia Make solution alkaline by adding ammonia It provide basic condition to develop red color Extract with 5ml dithizone until it become green Extract with 5ml dithizone until it become green At least 2-3 extraction done and mix in the end in separating funnel Combined dithizone extracts are shaken for 30 mins with 30 ml of nitric acid and the chloroform layer is discarded Combined dithizone extracts are shaken for 30 mins with 30 ml of nitric acid and the chloroform layer is discarded Acidic layer is separated from chloroform . Nitric acid make lead free from chloroform layer
- 6. To the acid solution add 5ml standard dithizone To the acid solution add 5ml standard dithizone Violet color produced due to lead- dithizonate Add 4ml ammonium cyanide Add 4ml ammonium cyanide Maintain optimum pH Shake for 30 minutes and observe the color Shake for 30 minutes and observe the color Compare colour
- 7. REAGENT PREPARATIONS: 1. Preparation of standard lead solution (1 ppm Pb): Dissolve 00400 g of lead nitrate in water containing 2 ml of dilute nitric acid and add sufficient water to produce 250.0 ml. This gives standard lead solution (1% Pb). 2. Standard lead solution (1 ppm Pb) is prepared by diluting 1 volume of standard lead solution (1% Pb) to 1000 volumes with water. 3. Preparation of dithizone extraction solution: Dissolve 30 mg of dithizone in 1000 ml of chloroform and add 5 ml of ethanol (95%). The solution is stored in refrigerator. Before use, the solution is shaken with about half of its volume of 1% v/v nitric acid solution and the acid is discarded. 4. Preparation of dithizone standard solution: Dissolve 10 mg of dithizone in 1000 ml of chloroform.
- 8. CONCLUSION • If color produced in the sample solution is less than the standard solution, the sample will pass the limit test of lead and vice versa..