Linq pad succinctly

2
LINQPad Succinctly
By
José Roberto Olivas Mendoza
Foreword by Daniel Jebaraj

3
Copyright © 2017 by Syncfusion, Inc.
2501 Aerial Center Parkway
Suite 200
Morrisville, NC 27560
USA
All rights reserved.
Important licensing information. Please read.
This book is available for free download from www.syncfusion.com on completion of a
registration form.
If you obtained this book from any other source, please register and download a free copy from
www.syncfusion.com.
This book is licensed for reading only if obtained from www.syncfusion.com.
This book is licensed strictly for personal or educational use.
Redistribution in any form is prohibited.
The authors and copyright holders provide absolutely no warranty for any information provided.
The authors and copyright holders shall not be liable for any claim, damages, or any other
liability arising from, out of, or in connection with the information in this book.
Please do not use this book if the listed terms are unacceptable.
Use shall constitute acceptance of the terms listed.
SYNCFUSION, SUCCINCTLY, DELIVER INNOVATION WITH EASE, ESSENTIAL, and .NET
ESSENTIALS are the registered trademarks of Syncfusion, Inc.
Technical Reviewer: James McCaffrey
Copy Editor: Courtney Wright
Acquisitions Coordinator: Morgan Weston, social media marketing manager, Syncfusion, Inc.
Proofreader: John Elderkin

4
Table of Contents
The Story behind the Succinctly Series of Books ................................................................. 8
About the Author ....................................................................................................................10
Who Is This Book For?...........................................................................................................11
Chapter 1 Introduction...........................................................................................................12
What is LINQPad?................................................................................................................12
LINQPad editions .................................................................................................................12
LINQPad’s main specifications.............................................................................................14
How LINQPad works ............................................................................................................14
Chapter summary.................................................................................................................16
Chapter 2 Installing LINQPad................................................................................................18
Getting started......................................................................................................................18
Getting LINQPad .............................................................................................................18
LINQPad installation process ...............................................................................................18
LINQPad deployment structure ............................................................................................24
Creating a portable deployment of LINQPad ........................................................................25
Chapter summary.................................................................................................................26
Chapter 3 Beginning with LINQPad ......................................................................................27
Running LINQPad ................................................................................................................27
LINQPad user interface........................................................................................................27
User interface graphic elements ......................................................................................27
Customizing the editor window ........................................................................................28
The ever-present Hello World...............................................................................................30
Saving the Hello World code............................................................................................31

5
Chapter summary.................................................................................................................33
Chapter 4 LINQPad Basics....................................................................................................35
Queries: the basic concept in LINQPad................................................................................35
Changing the location where queries are saved ..............................................................35
Searching for a specific query..........................................................................................38
Programming languages available in LINQPad................................................................40
Query file internal structure..............................................................................................41
Managing SQL connections..................................................................................................42
Creating a SQL connection..............................................................................................42
The Connection context menu .........................................................................................45
Browsing LINQPad samples.................................................................................................46
A LINQ-to-objects sample................................................................................................48
A multiple statements sample ..........................................................................................49
The Dump method................................................................................................................51
How Dump works.............................................................................................................51
Some issues with the Dump method................................................................................54
Chapter summary.................................................................................................................55
Chapter 5 Querying Databases with LINQ-to-SQL...............................................................57
Creating a database from LINQPad......................................................................................57
Creating database’s entities .................................................................................................58
Populating a database .....................................................................................................61
Displaying database changes in LINQPad.......................................................................62
Retrieving rows from a table.................................................................................................63
Returning a certain number of rows .................................................................................63
Using lambda expressions...............................................................................................64
Sorting rows.....................................................................................................................65

6
Using aggregate functions ...............................................................................................66
Filtering and grouping rows ..................................................................................................67
An example for filtering rows............................................................................................67
An example for grouping rows .........................................................................................68
Querying for specific columns...............................................................................................70
Putting all together ...............................................................................................................71
LINQ-to-SQL with multiple statements..................................................................................71
The PredicateBuilder class...................................................................................................72
A query that uses PredicateBuilder..................................................................................73
A multiple keyword search ...............................................................................................75
Chapter summary.................................................................................................................75
Chapter 6 LINQPad as a Code Scratchpad...........................................................................77
How C# code can be executed in LINQPad..........................................................................77
Testing a C# expression ..................................................................................................77
Executing C# statements.................................................................................................78
Running a C# program.....................................................................................................78
Measuring query performance..............................................................................................81
Referencing custom and default assemblies ........................................................................82
Picking up an assembly from the system .........................................................................83
Choosing an assembly directly from the computer’s file system.......................................85
Importing namespaces into queries......................................................................................86
Unleashing Dump’s power....................................................................................................89
Testing the appearance of a Windows form control .........................................................89
The CustomButton class with a different approach ..........................................................90
Downloading an image from a web location.....................................................................91
The Util class........................................................................................................................92

7
ClearResults method .......................................................................................................92
Cmd method....................................................................................................................93
GetMyQueries method.....................................................................................................94
WriteCsv method .............................................................................................................94
Run method.....................................................................................................................95
ProgressBar class............................................................................................................95
Progress property ............................................................................................................96
Chapter summary.................................................................................................................98
Chapter 7 General Summary.................................................................................................99
General Conclusions about LINQPad..................................................................................103
Appendix ...............................................................................................................................104
LINQPad keyboard shortcuts..............................................................................................104
Execution.......................................................................................................................104
Query properties............................................................................................................104
Window management ....................................................................................................105
Editor.............................................................................................................................106
Mouse shortcuts ............................................................................................................106

8
The Story behind the Succinctly Series
of Books
Daniel Jebaraj, Vice President
Syncfusion, Inc.
taying on the cutting edge
As many of you may know, Syncfusion is a provider of software components for the
Microsoft platform. This puts us in the exciting but challenging position of always
being on the cutting edge.
Whenever platforms or tools are shipping out of Microsoft, which seems to be about
every other week these days, we have to educate ourselves, quickly.
Information is plentiful but harder to digest
In reality, this translates into a lot of book orders, blog searches, and Twitter scans.
While more information is becoming available on the Internet and more and more books are
being published, even on topics that are relatively new, one aspect that continues to inhibit us is
the inability to find concise technology overview books.
We are usually faced with two options: read several 500+ page books or scour the web for
relevant blog posts and other articles. Just as everyone else who has a job to do and customers
to serve, we find this quite frustrating.
The Succinctly series
This frustration translated into a deep desire to produce a series of concise technical books that
would be targeted at developers working on the Microsoft platform.
We firmly believe, given the background knowledge such developers have, that most topics can
be translated into books that are between 50 and 100 pages.
This is exactly what we resolved to accomplish with the Succinctly series. Isn’t everything
wonderful born out of a deep desire to change things for the better?
The best authors, the best content
Each author was carefully chosen from a pool of talented experts who shared our vision. The
book you now hold in your hands, and the others available in this series, are a result of the
authors’ tireless work. You will find original content that is guaranteed to get you up and running
in about the time it takes to drink a few cups of coffee.
Free forever
Syncfusion will be working to produce books on several topics. The books will always be free.
Any updates we publish will also be free.
S

9
Free? What is the catch?
There is no catch here. Syncfusion has a vested interest in this effort.
As a component vendor, our unique claim has always been that we offer deeper and broader
frameworks than anyone else on the market. Developer education greatly helps us market and
sell against competing vendors who promise to “enable AJAX support with one click,” or “turn
the moon to cheese!”
Let us know what you think
If you have any topics of interest, thoughts, or feedback, please feel free to send them to us at
succinctly-series@syncfusion.com.
We sincerely hope you enjoy reading this book and that it helps you better understand the topic
of study. Thank you for reading.
Please follow us on Twitter and “Like” us on Facebook to help us spread the
word about the Succinctly series!

10
About the Author
I’m an IT businesses entrepreneur, a software developer, and a huge technology fan. My
company went to market in 1990, focused mostly on custom software development. We started
with COBOL as our main programming language, and since then we’ve evolved up to .NET and
Microsoft Office technologies. Through these years, some of my core activities have included
research about cutting-edge technologies and searching for new tools that can help us
automate some or all processes regarding our products’ development lifecycle.
In 2010, electronic invoicing was set as a requirement for business transactions in Mexico,
which forced us to upgrade all of our business-related products within a six-month window. In
those days, the effort of our development team was huge. Fortunately, we delivered all of our
products right on time.
We didn’t expect any further changes regarding electronic invoicing, but we were wrong. Two
years later, in 2012, the Mexican Tax Authority implemented a lot of modifications regarding
invoicing. The deadline for these changes gave us only four months to upgrade all of our
products.
Since then, new requirements about electronic invoicing have been published by the Mexican
Tax Authority every year. This has made it almost impossible for us to comply with them on time
without a huge effort from our company.
LINQPad went into action in 2015 as a solution for testing our .NET reusable libraries related to
electronic invoicing. As a result, testing for those libraries was done in a fraction of the time
compared with our previous efforts. The delivery of our products can now be made with less
time and effort.
As a great lover of technology, I’ve been exploring the product since the first day we started
using it, and it has pleased me immensely. Because it supports LINQ, our company has an easy
way to learn how to implement it in our .NET applications without the need to build any kind of
project for doing so. Also, testing became instantaneous. This helped us improve our Scrum
practices, allowing us to include more features for a product in a single sprint. This increases
maturity level for each of our products in less time.
For these reasons, LINQPad will definitely remain a part of our toolbox for many years.

11
Who Is This Book For?
This book is written primarily for those IT professionals who work with the .NET platform
because LINQPad is a utility targeted for these kinds of developers. It’s best that you have C#
programming language skills and some basic knowledge about LINQ.
The book starts with a detailed overview of LINQPad and its features. The second chapter
covers the LINQPad installation process, including prerequisites and where to get the free
edition of LINQPad. The rest of the book explains how to get the most out of LINQPad, starting
with some basics. Themes like querying databases and code prototyping are explained in
separate chapters.
This book will focus on the free edition of LINQPad4 and the C# programming language. A few
LINQPad5 samples will be explained when their features are unique for this version. Also,
Visual Studio 2015 will be employed to write some of the code examples, with the .NET
framework 4.5 as the target framework for assemblies building. Also, Microsoft SQL Server
Management Studio will be used for databases treatment. All samples described in this book
can be downloaded here.
I hope that all readers enjoy this material and that it helps you use LINQPad as a tool for
improving your development lifecycle in order to deliver applications in less time.

12
Chapter 1 Introduction
What is LINQPad?
LINQPad is a software utility developed by Joseph Albahari, and it’s intended to be used as a
part of .NET application development. It is used for interactively querying SQL databases using
LINQ, as well as interactively writing C# code without the need for an IDE (such as Visual
Studio). This feature expands its use as a “test tool” where C# code can be quickly prototyped
outside the IDE. It also supports the VB.NET, SQL, and F# languages. LINQPad supports the
following technologies:
• Entity Framework
• LINQ to Objects
• LINQ to SQL
• LINQ to XML
The product starts with a freemium version, which lacks an autocomplete feature for the C#
language. To get this feature, the user should purchase a commercial license.
Regardless of the type of license, either free or commercial, there are three versions of the
product:
• LINQPad 2.x for .NET framework 3.5
• LINQPad 4 for .NET framework 4.0/4.5. Current stable release: 4.58.0
• LINQPad 5 for .NET framework 4.6: Current stable release: 5.05.02
Note: LINQPad 5 can run side-by-side with LINQPad 4.
LINQPad editions
There are four editions for the LINQPad product: Free, Pro, Developer, and Premium. Except
for the first one, the user will need to pay a license fee for using the product. Depending on
which edition is purchased, LINQPad unlocks a series of additional features to those included in
the free edition. The user installs the free edition of LINQPad first, then buys a license for
upgrading to the desired edition beyond the free one. This license applies for both LINQPad 4
and LINQPad 5, so the user doesn’t need to pay a fee for each version.
Note: According to the product’s website, the users who purchased a license of
LINQPad 4 prior January 1, 2015 must purchase an upgrade to LINQPad 5.

13
The following table summarizes all features available for LINQPad, in accordance with the
edition being used.
Table 1: LINQPad Editions Comparison Table
Edition
Features Free Pro Developer Premium
Run LINQ queries or any C#/VB/F#
expression/program
Yes Yes Yes Yes
Results output to rich text or data grids Yes Yes Yes Yes
Automatic translation to SQL, fluent-lambda,
and IL
Yes Yes Yes Yes
Reference user’s own assemblies, plus the
entire .NET Framework
Yes Yes Yes Yes
Use of custom extensions, visualizers, and data
source providers
Yes Yes Yes Yes
Full C#/F#/VB autocompletion and tooltips Yes Yes Yes
Smart tags for importing additional
namespaces/references (C#/VB)
Yes Yes Yes
Code outlining and auto-formatting (C#/VB) Yes Yes Yes
Rename symbol, go to definition and find
references (C#/VB)
Yes Yes Yes
Built-in and custom code snippets Yes Yes
Cross-database querying for SQL Server Yes Yes
Directly edit SQL data in grids and save
changes back to database
Yes Yes

14
Edition
Features Free Pro Developer Premium
Full NuGet integration Yes Yes
Integrated debugger, with call stack, threads,
local variables/watch windows, breakpoints and
single-stepping
Yes
LINQPad’s main specifications
LINQPad offers a series of benefits to the user, such as:
• Full support for C# 6.0 and VB 14 in LINQPad 5.
• Reporting of execution time in its status bar, allowing performance testing.
• Cloning of code snippets with a key combination (Ctrl+Shift+C), allowing their execution
side-by-side.
• Custom extensions writing, which allows the user to code methods and classes to make
them available for all LINQPad queries.
• Custom assemblies referencing.
• Building typed data contexts on the fly, including drivers and formatters for SQL Server,
SQL Azure, SQLCE, Oracle, SQLite, and MySQL.
• Object rendering with the embedded Dump method.
• Access control for the Dump method in user’s custom types.
• Full command line experience with the lprun.exe utility.
• Support for writing custom visualizers.
• Support for presentation mode, in order to allow cordless presenter devices.
How LINQPad works
LINQPad is a client/server application that works in an unusual way. While most client/server
applications have many clients and one server, with LINQPad, there is one client and there are
many servers. In this case, the LINQPad user interface is the client as expected, and for each
query that is going to be executed, LINQPad creates a separate server, which has a class that
runs in its own process. This process runs the query in isolation. The isolation prevents queries
from interfering with each other or with the user interface, and it allows LINQPad to safely
cancel a query without affecting other application domains.
LINQPad uses a customized communications layer that runs atop Windows shared memory,
providing a faster, more reliable, and fully asynchronous communications layer.

15
Microsoft Roslyn libraries are used to compile queries in LINQPad 5. Regarding database
objects, LINQPad needs a typed DataContext for backing any database object referenced in
queries, because C# and VB are statically typed. LINQPad builds these typed DataContexts on
the fly by using Reflection.Emit instead of generating and compiling source code, for
performance reasons. Also, it uses LINQ to SQL rather than Entity Framework because LINQ to
SQL is lighter and faster in building meta models when instantiated.
LINQPad's emission engine itself runs in a separate application domain, because
Reflection.Emit must instantiate types in memory whose assemblies cannot be unloaded. This
domain is regularly refreshed to avoid an ever-increasing memory footprint.
So much of LINQPad’s work goes on in the background, such as querying database schemas,
emitting typed DataContexts, and compiling and executing queries. For this reason, every
potentially time-intensive feature operates asynchronously to maintain a responsive user
interface.
LINQPad’s Dump method (which will be discussed later) feeds the output into an XHTML stream.
This stream is displayed using an embedded web browser (the user can notice this by right-
clicking a query result and choosing View Source). LINQ to XML is used to transform the output
into XHTML as one LINQ query. The deferred expansion of results and fetching of additional
data when the user clicks on hyperlinks is made via JavaScript.
LINQPad uses third-party libraries from several software publishers. These include Actipro’s
SyntaxEditor, the SharpDevelop project, Microsoft Roslyn, and NRefactory. The libraries from
these publishers are included as embedded resources in LINQPad, so it ships as a single
executable.
All updates for LINQPad are downloaded into the application’s data folder. Then, LINQPad
checks that the new assembly has the same strong name. If so, LINQPad forwards to that
executable, which then writes itself back to the original one. This operation can fail, depending
on the permissions given to the folder where LINQPad was downloaded. Every time it’s started,
LINQPad always checks to see if there’s a later, signed version of itself in the application’s data
folder.

16
Figure 1: Context diagram about how LINQPad works
Chapter summary
LINQPad is a software utility developed by Joseph Albahari, and it’s intended to be used as a
part of .NET application development. It is used to interactively query SQL databases using
LINQ, as well as to interactively write C# code without the need for an IDE, such as Visual
Studio.
LINQPad supports VB.NET, SQL, and F# languages. Also, LINQPad supports Entity
Framework, LINQ to Objects, LINQ to SQL, and LINQ to XML dialects.
The product starts with a freemium version, which lacks several features, such as autocomplete
for the C# language. Regardless of the type of license, free or commercial, there are three
versions for the product: LINQPad 2.x (for .NET Framework 3.5), LINQPad 4 (for .NET
Framework 4.0/4.5), and LINQPad 5 (for .NET Framework 4.6). Also, there are four editions for
each one of these versions: Free, Pro, Developer, and Premium.
Depending on which version is purchased, LINQPad automatically enables extra features above
all those included in the free version. Some of these features include Full C#/F·/VB
autocompletion and tooltips, code outlining and formatting for C#/VB, built-in and custom code
snippets, and full NuGet integration.

17
LINQPad is a client/server application, which works as one client and many servers. In this
case, the LINQPad user interface is the client, as expected, and for each query that is going to
be executed, LINQPad creates a separate server. For communications between client and
servers, LINQPad uses a customized communications layer that runs atop Windows shared
memory.
Microsoft Roslyn libraries are used to compile queries in LINQPad 5. All database objects are
backed by using typed DataContexts, because C# and VB are statically typed. All DataContexts
are built on the fly by using Reflection.Emit. LINQPad uses LINQ to SQL rather than Entity
Framework. All background work (querying database schemas, compiling and executing
queries) operates asynchronously, in order to maintain a responsive user interface.
LINQPad uses third-party libraries from several software publishers within the UI. These
includes Actipro’s SyntaxEditor, the SharpDevelop project, Microsoft’s Roslyn, and NRefactory.
The libraries from these are included as embedded resources in LINQPad, so it ships as a
single executable.
All updates for LINQPad are downloaded into the application’s data folder. Every time it’s
started, LINQPad checks to see if there’s a later, signed version of itself in the application’s data
folder.

18
Chapter 2 Installing LINQPad
Getting started
LINQPad can be installed on any computer running Windows. The following requirements are
suitable for the product.
Hardware:
• Intel Dual Core 1 GHZ processor or above
• 2 GB RAM (4 GB recommended)
• 500 GB Hard disk drive
• VGA Monitor (1024x768 resolution minimum)
• Keyboard and mouse
• Internet connection (for downloading the product)
Software:
• Windows 7 SP1 or above
• .NET Framework 3.5/4.0/4.5/4.6
• Visual Studio 2010 or above (for developing purposes)
Getting LINQPad
LINQPad can be downloaded for free from the following locations:
• LINQPad 5
• LINQPad 4
LINQPad installation process
As previously mentioned in the “What is LINQPad?” section of Chapter 1, LINQPad 4 and
LINQPad 5 can both be installed in the same computer, and they can work side-by-side. For
purposes of this section, the LINQPad 4 installation process will be detailed, but the same
process applies to LINQPad 5.
To start LINQPad installation, download LINQPad from one of URLs listed in the previous
section. Then, double-click on the LINQPad4Setup.exe file (or LINQPad5Setup.exe for
LINQPad5) located in the Downloads folder.

19
Figure 2: LINQPad setup files in Downloads folder
The first dialog box that appears is shown in the following figure.
Figure 3: LINQPad installation’s first dialog box

20
Click Next to continue, and the Select Destination Location dialog box appears.
Figure 4: Select Destination Location dialog box
It’s recommended that you use the default location provided by the installation program. In this
case, click Next, and the Select Additional Tasks dialog box appears.

21
Figure 5: Select Additional Tasks dialog box
In this dialog, you select a set of additional tasks to be performed by the installation program.
These tasks include the association of every file with the .linq extension to be opened by
LINQPad, creating a desktop icon for the program, creating and icon in the Quick Launch bar,
and adding the lprun.exe command to the PATH system variable.
The previous figure shows the tasks that need to be performed for the practical purposes of this
book. Click Next to continue, and the Ready to Install dialog appears.

22
Figure 6: Ready to Install dialog box
At this point, you have three options.
• Click Back to change any of the previous selections made.
• Click Cancel to abort the installation process.
• Click Install to start the installation process.
If you click Install, the Installing dialog box appears and the installation process starts.

23
Figure 7: Installing dialog box
When the setup program completes LINQPad installation, the Installation Finished dialog box
appears.

24
Figure 8: Installation Finished dialog box
At the end of the installation process, make sure the Launch LINQPad check box is selected in
the dialog box, and click Finish to launch LINQPad.
LINQPad deployment structure
LINQPad installation creates a set of folders and files when it deploys the application. These
folders and files hold all the necessary elements that make LINQPad work properly. Such
elements are queries, plugins, code snippets, data context drivers, connections, default
references, and user preferences. Some of these elements will be explained later in this book.
The folders and files created by the installation process are displayed in the following table.
Table 2: LINQPad folder structure
Folder Purpose
DocumentsLINQPad Queries Holds all queries created by the user.
LINQPad uses this folder to display
those queries in a tree view named My
Queries.

25
Folder Purpose
DocumentsLINQPad Plugins Holds any custom assembly referenced
by all or some queries.
DocumentsLINQPad Snippets Holds custom code snippets (doesn’t
apply for free edition).
%LocalAppData%LINQPaddrivers Holds custom data context drivers that
can be used in all queries.
%AppData%LINQPadConnectionsV2.xml Stores all connections that appear in
the Connections tree view.
%AppData%LINQPadDefaultQuery.xml Stores all assembly references that will
be used by default in queries.
%AppData%LINQPadRoamingUserOptions.xml Stores the user prefrences that dictate
LINQPad behavior.
Note: If a same structure is created in the folder where LINQPad.exe is located,
this structure will take precedence over the structure displayed in the previous
table.
Creating a portable deployment of LINQPad
LINQPad can be deployed with a USB memory stick in order to use it as a portable application.
To succeed in this matter, a folder named LINQPad (for practical purposes) should be created
in the memory stick. Then, the following folder structure should be created within the LINQPad
folder.
Code Listing 1
LINQPad/
LINQPad.exe
LINQPad.exe.config
Que
ries/ -- (for saving queries)
plugins/ -- (plugins + 'My Extensions' queries here)
snippets/ -- (for saving custom snippets)
drivers/ -- (for saving custom drivers)
ConnectionsV2.xml -- (used to populate Schema tree view)
DefaultQuery.xml -- (default namespaces/references for new queries)

26
RoamingUserOptions.xml -- (user preferences)
Lprun.exe -- (for command line support)
Now you can use LINQPad by inserting the memory stick in a USB port, then executing the
LINQPad.exe file located in the LINQPad folder.
Note: The "portable application" concept is applied to a program that can be
executed in any computer by simply running its .exe file without a previous
installation process.
Chapter summary
This chapter describes the LINQPad installation process, which starts with downloading the
LINQPad installation program. Once the installation program is downloaded, the user should
double-click on the LINQPad4Setup.exe (or LINQPad5Setup.exe) file to begin the installation.
All installation processes are guided by a series of dialogs allowing you to select different
options along the process. These options include the program’s location folder, file associations,
icons creation, and environment variables setting for command line support.
When LINQPad is installed, a set of folders and files is created in order to make sure LINQPad
works properly. These folders and files hold all necessary elements needed by LINQPad, such
as queries, plugins, code snippets, data context drivers, connections, default references, and
user preferences.
LINQPad can also be deployed as a portable application. To accomplish this task, a special
directory structure should be created in a USB memory stick, including the linqpad.exe file
within it.

27
Chapter 3 Beginning with LINQPad
Running LINQPad
To start LINQPad, double-click on the LINQPad icon on the Windows desktop. This action
brings up the LINQPad user interface.
Figure 9: LINQPad icon on the Windows desktop
LINQPad user interface
The LINQPad user interface corresponds to the client application in which users will do most of
their work.
User interface graphic elements
The following graphic elements of the interface, which we will be using for the purposes of this
book, are shown in Figure 10.
1. LINQPad main menu: Holds all LINQPad commands available to work with the
program.
2. Connection’s tree view area: Shows all connections created by the user with the
connection manager.
3. Queries and Samples tree view area: Shows all queries and extensions created by the
user. It also shows all available samples within LINQPad, which are displayed in
separate tabs.
4. Query code tab window area: Where the user will write the query code.
5. Query code tab caption: Shows the name of the query that is being edited.
6. Add New Tab button: Adds a new tab for query editing.
7. Execute Query button: Executes the query that is currently selected.

28
8. Stop Execution button: Stops query execution.
9. Results View Type button: Allows the user to switch between Rich Text and Data Grid,
for viewing query results.
10. Language Selector combo box: Allows the user to select the programming language in
which queries will be written.
11. Connection Selector combo box: Allows the user to select a previously created
custom connection.
12. Close Tab button: Closes the tab currently selected.
13. Premium Features activation link: In the free version of LINQPad, this link allows the
user to open the product’s webpage to acquire a license, for activating paid license’s
features.
14. Status Bar: Shows several messages sent by the program, including query’s time
performance.
Figure 10: LINQPad user interface
Customizing the editor window
You can customize the editor window’s font and other elements, such as the window
background color or displayed code line numbers. This can be done by using the Preferences
command located in the Edit menu.

29
Figure 11: Preferences command in Edit menu
For the purposes of this book, I customized my editor window by setting the font to Segoe UI
and making code line numbers visible.

30
Figure 12: Editor Window Preferences
It can be noted in Figure 12 that font size customization is not available. That’s because
LINQPad allows the user to increase or decrease font size in two different ways: by using the
Ctrl+Plus (increase) or Ctrl+Minus (decrease) key combinations, or by using the mouse scroll
wheel while pressing the Ctrl key at the same time.
The ever-present Hello World
Our first meeting with LINQPad will take place by creating and running the traditional Hello
World code. To do this, first set the Language drop-down control to C# Statement(s), then type
the following code into the Query window.

31
Code Listing 2
string greeting = "Hello World";
greeting.Dump();
Now, to run to previous code, click on the Execute Query (green arrow) button. The output for
this code is shown in the following figure.
Figure 13: Hello World sample output
Saving the Hello World code
With LINQPad, all the queries you write can be easily accessed using the My Queries tree view
located at the bottom-left side of the user interface.
In order to make the Hello World code available from tree view, you need to save it first. This
can be done by pressing Ctrl+S. In the Save Query As dialog box, type the file name for saving
the query. For the purposes of this book, the name will be helloworld. The file will be saved
with a .linq extension.
The file name given to the query will appear beneath the My Queries node of the tree view after
it is saved in the disk. Now you can quickly access the helloworld code when needed.

32
Figure 14: The “Save Query As” dialog box

33
Figure 15: The helloworld query beneath the My Queries node.
Chapter summary
This chapter explained how to begin using LINQPad. To start LINQPad, double-click on the icon
placed on the Windows desktop. This will launch the LINQPad user interface, which is the client
application that will do most of the work.
We identified 14 graphic elements in LINQPad user interface for purposes of this book. These
elements are: LINQPad main menu, Connection’s tree view area, Queries and Samples tree
view area, Query code tab window area, Query code tab caption, Add New Tab button, Execute
Query button, Stop Execution button, Results View Type button, Language Selector combo box,
Connection Selector combo box, Close Tab button, Premium Features activation link, and
Status Bar.
You can customize the editor window by using the Preferences command from the Edit menu.
Then, the settings for the window can be changed in the Editor tab of the Preferences dialog.
For purposes of this book, the Segoe UI font will be used, and code line numbers will be
displayed.

34
Font size customization is not available, because LINQPad allows the user to increase or
decrease this size using Ctrl+Plus (increase) or Ctrl+Minus (decrease) keys combinations, or
the mouse scroll wheel while pressing the Ctrl key at the same time.
A “Hello World” example was used to start with LINQPad work. The output produced by this
code was displayed in the Results window.
The code of the “Hello World” example was saved into a file named helloword.linq in order to
make it available for future use. After that, the filename appeared beneath the My Queries node
located at the bottom-left of the user interface.

35
Chapter 4 LINQPad Basics
Queries: the basic concept in LINQPad
LINQPad uses the term query for every piece of code that is written in the editor. So from this
point forward in LINQPad Succinctly, the term query will be used for pointing to every code
sample displayed in it.
As discussed in the “Save Hello World code” section of the previous chapter, a query can be
saved for future use. When a query is saved, LINQPad will display its filename beneath a tree
view node called My Queries. This tree view is located at the bottom-left side of the user
interface.
Changing the location where queries are saved
LINQPad stores queries in a folder named LINQPad Queries, which by default is located in the
Documents folder that belongs to the current user. This behavior can be changed by clicking the
Set Folder hyperlink located above the My Queries tree view node. This action will bring up the
Preferences dialog box with the Folders tab selected.

36
Figure 16: The Set Folder hyperlink
All queries discussed in this book will be stored in a folder named
C:LINQPad_SuccinctlyQueries. To select this folder, first create it on disk, and then click the
Custom Location button located under the My Queries framework in the Preferences dialog
box. Next, click the Browse hyperlink to the right of the same option button, and the Browse For
Folder dialog box will appear.

37
Figure 17: The Browse For Folder dialog box
Select C:LINQPad_SuccinctlyQueries, and then click OK. After that, the folder name will
appear in the combo box list located under the Custom Location option button.

38
Figure 18: The Preferences dialog after the C:LINQPad_SuccinctlyQueries folder
Click OK to accept all changes made.
Searching for a specific query
In a working environment with a few queries, locating a specific one may be a simple task. But
when those queries increase in number, this can be a hard work. LINQPad solves this issue by
allowing you to search queries using a term. To do this, click on the Go to hyperlink located on
the My Queries tree view node.

39
Figure 19: The Go to hyperlink.
The Navigate To Query dialog box will appear on the screen. At this point, the user can type a
term into the Search Terms combo box, and LINQPad will display all queries with names that
contain the term typed. Typing the term hel will cause LINQPad to display the helloword.linq
query in the Result list.

40
Figure 20: The Navigate to Query dialog
Select the helloworld query from the list, and then click OK to open this query in the editor.
Programming languages available in LINQPad
In the “LINQPad user interface” section of previous chapter, 14 graphic elements were
identified. One of these elements was the Language Selector combo box. As explained in this
section, this graphic element allows the user to choose the programming language that will be
used to write queries.
LINQPad has the following programming languages available:
• C# Expression: An expression written in C#, with no semicolon at the end of line.
• C# Statements: Several statements written in C#. Each code line must end with a
semicolon.
• C# Program: A C# Main () method, which can be followed by another methods or
another class definitions. Each code line must end with a semicolon.
• VB Expression: Same as C# Expression, but coded in VB.Net.
• VB Statements: Same as C# Statements, but coded in VB.Net.
• VB Program: Same as C# Program, but coded in VB.Net.
• SQL: One or more statements coded in SQL language.

41
• ESQL: Entity SQL Language Queries.
• F# Expression: An expression written in F#.
• F# Program: A program block written in F#.
Query file internal structure
When a query is saved, LINQPad associates the .linq file extension to its filename. Internally, a
header in XML format is added before the code written in the query. The following sample
displays this structure.
Code Listing 3
<Query Kind="Expression" />
// Here it is, the simplest "hello, world" ever! (Just hit F5)
"Hello, world!"
As noted in the previous sample, the root node for the XML header saved with the query is
precisely named Query. The attribute Kind for this node tells LINQPad which type of
programming language should be used when compiling the query. This matches with the option
chosen from the Language Selector combo box.
If a query uses a SQL connection (which will be explained in the following section), the internal
structure for the query file will look like the following sample.
Code Listing 4
<Query Kind="Expression">
<Connection>
<ID>4dbf890a-9be0-431c-a6d4-4bb20c1ba604</ID>
<Persist>true</Persist>
<Server>.SQLEXPRESS</Server>
<SqlSecurity>true</SqlSecurity>
<UserName>sa</UserName>
<Password>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAApIpboxkMi0KXQm107ZYAoQAAAAACAAAAAAAQZgAAA
AEAACAAAADdjRylNWoymuJ4gbmgPQgfMFr1PooNmcD3wfZviEVW3QAAAAAOgAAAAAIAACAAAADE6tComfTn
fJ/vn8LgxcYRUyRtOIOmztt8luz6FzRMohAAAAAa5ENguOQMGdGZdrnVXQi0QAAAALj09Vdcv09hYQIHq/n
iC9ydeO4NMEUvl8BpUNFKq4hYdG7sRBPTIOFe2a7M55OueQV5T916HCR6MaMom1sOSIA=</Password>
<Database>uspostalcodes</Database>
<ShowServer>true</ShowServer>
</Connection>
</Query>
Places.Where(row => row.County_id == 1926)
Now the Query node of the XML header contains a node named Connection. This node stores
all parameters needed to connect to the database server employed by the query.
With both of these samples, the XML header added to the query tells LINQPad which
programming language and SQL connection the query uses.

42
Managing SQL connections
We can manage connections to SQL servers using the LINQPad user interface. This can be
done in the Connection’s tree view area, located at the left side of the interface, by clicking on
the Add connection hyperlink.
Figure 21: The Add connection hyperlink in Connection’s tree view area
Creating a SQL connection
When you click the Add connection hyperlink, the Choose Data Context dialog box will be
displayed. In this dialog, you can choose the LINQPad driver that will be used to make the
connection. In this case, the LINQ to SQL driver (which is the default) will be used.
To complete driver selection, click Next. (Clicking Cancel will abort the process.)

43
Figure 22: The Choose Data Context dialog
The LINQPad Connection dialog box is shown (titled “LINQ to SQL Connection” in LINQPad 5)
in order to set connection’s parameters. The example for this book will create a Microsoft SQL
Server connection. Select the SQL Server option from the Provider frame, located at the top of
the dialog box.
It is assumed that a Microsoft SQL Server Express instance is installed in the local computer,
and that this instance it was named SQLEXPRESS during the SQL’s installation process. It’s
also assumed that this instance was configured for a SQL Authentication security mode.
Regarding how databases will be managed, LINQPad gives three options:
• Display all databases stored in the server, using a TreeView.
• Attach a database file stored in the local hard drive to the server.
• Specify a specific database from the server, or create a new one.
For purposes of this book, the first option will be selected.
Finally, the user should configure a set of options for the connection’s Data Context.
• Pluralize EntitySet and Table properties. All entities and table properties are shown in
plural.

44
• Capitalize property names. All name for properties appear with the first letter in
uppercase.
• Include Stored Procedures and Functions. When checked, all functions and stored
procedures belonging to any database that appears in the tree view are displayed.
The connection used in this book requires all default options being left with no changes.
Figure 23: LINQPad Connection dialog box
You can test the connection before accepting the parameters by clicking the Test button,
located at the bottom of the dialog box. Once the test is passed, click OK to create the
connection and display it in the user interface.

45
Figure 24: The new connection appears in the Connection’s tree view area.
By default, LINQPad names a connection using the server name followed by a period and the
name of the authenticated user, when SQL Authentication is chosen. In this case, the name
displayed in the tree view is .SQLEXPRESS.sa. because I connected as the SQL Server sys
admin. If Windows Authentication is selected in the LINQPad Connection dialog box, the name
given to the connection will contain the server name only.
Note: When a specific database is selected in the LINQPad Connection dialog
box, the connection’s name will contain the name of the database that was
chosen, at the end.
The Connection context menu
The Connection context menu will pop up when the user right-clicks on the connection’s name.

46
Figure 25: The Connection context menu
The commands available from this menu are:
• Refresh: Queries the server and reloads all entities and their properties.
• Delete Connection: Removes the selected connection from the tree view.
• Rename Connection: Allows you to customize the name for the connection.
• Flag as Production: Sets a flag to indicate that the connection used is in a production
environment. When clicked, the word “Production” will appear at the right of the
connection’s name. Then, the command will appear in the context menu as “Unflag as
Production.”
• Create Similar Connection: Shows the LINQPad Connection dialog with all the
parameters for the selected connection, in order to create an exact new one or a
connection with almost the same parameters values.
• Properties: Shows the LINQPad Connection dialog box, in order to change connection’s
parameters.
Browsing LINQPad samples
The LINQPad user interface provides a special tab named Samples. This tab is located beside
the My Queries tree view area.
To work with a specific sample, click on the name of the desired one. LINQPad will
automatically bring up the code for that sample into the editor.

47
Figure 26: The Samples tab
Referring to the previous figure, if you click the Hello LINQPad! sample, the following code will
be displayed in the editor.
Code Listing 5
// Here it is, the simplest "hello, world" ever! (Just hit F5)
"Hello, world!"
The previous code shows a simpler “Hello World” example than the one discussed in the “The
ever-present Hello World” section in Chapter 3.
As the code suggests, the user should hit F5 in order to execute the code. This is the equivalent
of clicking on the Execute Query button.

48
Figure 27: Output for the “Hello LINQPad!” sample
A LINQ-to-objects sample
To demonstrate LINQ-to-objects support, the “A simple query expression” sample will be used.
The code for this sample is the following.
Code Listing 6
// Now for a simple LINQ-to-objects query expression (notice no semicolon):
from word in "The quick brown fox jumps over the lazy dog".Split()
orderby word.Length
select word
// Feel free to edit this... (No-one’s watching!) You'll be prompted to save any
// changes to a separate file.
//
// Tip: You can execute part of a query by highlighting it, and then pressing F5.
The code is essentially a one-line LINQ-to-objects query expression that returns a list of words
from a string. The String Split method creates that list. Then, the orderby clause sorts the
list based on every word’s length. In this case, the list is sorted beginning with the smallest word
and ending with the largest one. Finally, the select statement iterates the list sequentially.

49
When the expression is executed, it produces the following output.
Figure 28: Output for the “A simple query expression” sample
The Language Selector combo box displayed in the previous figure shows C# Expression,
which is the type of language used for a one-line statement. In this case, no semicolon should
be used at the end of the code line.
A multiple statements sample
LINQPad also can execute multiple statements at a time. The “Multiple statements” sample will
be used to demonstrate this feature. The code for this sample is the following.
Code Listing 7
// Setting the query language to "C# Statement(s)" permits multiple statements:
var words =
from word in "The quick brown fox jumps over the lazy dog".Split()
orderby word.ToUpper()
select word;

50
var duplicates =
from word in words
group word.ToUpper() by word.ToUpper() into g
where g.Count() > 1
select new { g.Key, Count = g.Count() };
// The Dump extension method writes out queries:
words.Dump();
duplicates.Dump();
// Notice that we do need semicolons now!
The first statement of this sample does almost the same job as the sample discussed in the
previous section. But in this case, the list is sorted alphabetically, using the uppercase format for
each word in it. After that, the list is stored in the words collection.
The next statement is intended to get a list of duplicate words along with how many of these
words exists into the words collection. The from statement iterates the words list, and uses the
group clause to gather those words in uppercase format that are exactly the same. The criteria
used to create groups is the uppercase format of each one of them. Every group is stored into g
variable as an IGrouping interface, which is a collection of data records of string type
(word.ToUpper ()).
A special Key property is added. This property holds the grouped value (in this case, the
uppercase format of each word) that is associated with all records in the collection. The where
clause makes g available for the select clause only when the Count method of the collection
returns a value greater than 1. When this happens, a new <string, int> collection item is
added to the duplicates collection, using the grouped value (g.Key) as a key for the item and
storing the value returned by the g.Count method (which is actually the number of duplicates).
The Dump extension method (which will be explained in the following section) generates the
output for each one of the objects.
As stated previously, semicolons need to be used in a multiple statements query. Also, C#
Statement(s) must be selected from the Language combo box.
The execution of the query will display the following output.

51
Figure 29: A multiple statements query
The Dump method
The Dump extension method is probably one of the most powerful features of LINQPad. The
purpose of this method is to display the value(s) of almost any type of object, generating an
output to be usually displayed on screen.
How Dump works
The Dump extension method is not a shortcut for .NET’s Console.WriteLine method. Instead,
it is a recursive method that generates a display for the values of objects, in HTML format. It
supports collections, DataTables, Images, and other types. It can also format collections of
complex objects into tables.

52
The Dump method knows how objects dumped are built, and what values are stored into them,
by using the .NET Reflection mechanism. It then turns these objects into HTML and displays the
result in a grid. This mechanism makes results more readable and provides the user with a
great way to debug complex objects.
To demonstrate Dump, the user should select C# Statement(s) from the Language combo box,
and then type the following code in the editor.
Code Listing
new FileInfo(@"C:Windowsexplorer.exe ").Dump();
When the previous code is executed, the output displayed will be the following.
Figure 30: Dump method’s output
Figure 30 shows an example of the Dump method’s output. Note that the column header for the
grid has a blue background. Also, a white down arrow is displayed at the left. This means that
the output result can be expanded, getting more details on it.

53
Figure 31: Dump method’s output expanded
The Dump method allows you to pass a string parameter in order to display a description before
the result. The following example demonstrates this feature.
Code Listing 8
new FileInfo(@"C:Windowsexplorer.exe ").Dump("Windows Explorer info");
When the previous code is executed, the following output will be displayed.

54
Figure 32: Dump method’s output with a description
Some issues with the Dump method
The Dump method works great on small collections and most objects. The user might notice long
running times with big collections or some specific object types. Complex objects with many
levels of hierarchy, or with a large number of properties, can be difficult to read into the result
panel.

55
Chapter summary
This chapter was dedicated to showing basic concepts about LINQPad. One of these concepts
is the term “query.” LINQPad uses this term for every piece of code written in the editor, and it
allows us to save this code in code. All queries saved are displayed beneath a tree view node
called My Queries.
LINQPad stores queries in a folder named LINQPad Queries, located into the user’s Documents
folder. This behavior can be changed by clicking the Set Folder hyperlink, and browsing for a
new folder in the Preferences dialog box. All queries discussed in this book will be saved in a
folder named C:LINQPad_SuccinctlyQueries.
When the user works with a few queries, locating a specific one is simple. But when those
queries increase in number, this can be hard work. To solve this issue, LINQPad allows you to
search queries by using a term. This can be done by clicking on the Go to hyperlink located on
the My Queries tree view node. Then, the user can type the term in the Navigate to Query
dialog, and LINQPad will show all queries that match that term.
LINQPad can compile code in ten programming language variations. These variations are C#
Expression, C# Statements, C# Program, VB Expression, VB Statement, VB Statements, VB
Program, SQL, ESQL, F# Expression, and F# Program.
All query filenames are associated with the .linq file extension. Internally, a header in XML
format is added at the beginning of the file. This header tells LINQPad which kind of
programming language and SQL connection are used by the query.
LINQPad allows you to manage connections to SQL servers in the Connection’s tree view area
by clicking on the Add Connection hyperlink. Then, the Choose Data Context dialog box
displays, which allows the user to choose which LINQPad driver will be used. For purposes of
this book, we’ll use the LINQ to SQL driver (which is the default).
After the LINQPad driver is chosen, the LINQPad Connection dialog box is shown to set the
connection’s parameters. A Microsoft SQL Server connection will be created, assuming that a
SQLEXPRESS instance configured with SQL Authentication security mode is installed in the
local computer. Also, the default Data Context options will be used for the connection.
LINQPad names a connection using the server name followed by a period and the name of the
authenticated user, when SQL Authentication is chosen. The name displayed for the connection
created will be .SQLEXPRESS.sa. When Windows Authentication is selected, the name for the
connection will contain the server name only.
When the connection is displayed in the user interface, a context menu is available when the
user right-clicks on the connection’s name. This menu contains a set of commands for
managing that connection.
A few LINQPad queries samples were discussed in this chapter, too. The discussion starts with
the traditional “Hello World” sample, and continues with a LINQ-to-objects and a multiple
statements examples.

56
The last section of this chapter explains the Dump extension method, which is one of the most
powerful features of LINQPad. This method renders almost any type of object and turns it into
HTML by using reflection, and then displays the result in a grid.
The Dump method works great on small collections and most objects, but when big collections
are processed, the user might notice long running times.

57
Chapter 5 Querying Databases with LINQ-
to-SQL
This chapter will explain how to perform database queries with LINQPad. The default LINQ-to-
SQL driver will be used to run those queries. All samples explained in this chapter use a
database that will be populated with all United States postal codes. The name given to this
database will be uspostalcodes.
Creating a database from LINQPad
A SQL database can be created from LINQPad, as explained in the “Managing SQL
connections” section of Chapter 4. 2.
To create the uspostalcodes database, the user should click on the Add connection
hyperlink, and then select the LINQ-to-SQL driver from the Choose Data Context dialog box.
Click Next to bring up the LINQ to SQL Connection dialog box, where you can create the
database.
To create the uspostalcodes database (after the rest of connection parameters are chosen),
select the Specify new or existing database option from the Database options group, and
then type the name uspostalcodes into the combo box located below this option. The Create
database button will be enabled after name’s typing is finished; click this button to make
LINQPad create the database. LINQPad will display the message “Created uspostalcodes”
beside the Create database button after database creation. Click OK to save the connection info
and make it appear in the user interface.

58
Figure 33: LINQPad Connection dialog box appears after database creation
Creating database’s entities
If you look at the connection displayed in the user interface, you will notice that no entity
appears in the tree view. This means that LINQPad created the database only. Entities creation
for the database is up to the user. Unfortunately, there’s no easy way to create database’s
entities with LINQ-to-SQL. For this book, we’ll use Microsoft SQL Server Management Studio.

59
Figure 34: LINQPad user interface with uspostalcodes connection
You can launch SQL Server Management Studio from the Run dialog by typing ssms. Then,
you should log in into SQL Server Management Studio and select the uspostalcodes database
in the Object Explorer. Then, click the New Query button located in the toolbar to open a query
tabbed window. Type and execute the following code.
Code Listing 9
CREATE TABLE states
(state_id INT IDENTITY NOT NULL,
state_name VARCHAR(100) NOT NULL DEFAULT '',
state_abbr VARCHAR(4) NOT NULL DEFAULT '');
ALTER TABLE states ADD CONSTRAINT pk_states PRIMARY KEY (state_id);
CREATE INDEX idx01_states ON states (state_name);
CREATE TABLE counties
(county_id INT IDENTITY NOT NULL,
county_name VARCHAR(100) NOT NULL DEFAULT '',
state_id INT NOT NULL DEFAULT 0);

60
ALTER TABLE counties ADD CONSTRAINT pk_counties PRIMARY KEY (county_id);
CREATE INDEX idx01_counties ON counties (county_name);
ALTER TABLE counties ADD CONSTRAINT fk01_counties FOREIGN KEY (state_id) REFERENCES
states (state_id);
CREATE TABLE places
(
place_id INT IDENTITY NOT NULL,
place_name VARCHAR(200) NOT NULL DEFAULT '',
postal_code CHAR(5) NOT NULL DEFAULT '',
latitude DECIMAL(12,4) NOT NULL DEFAULT 0,
longitude DECIMAL(12,4) NOT NULL DEFAULT 0,
county_id INT NOT NULL DEFAULT 0
);
ALTER TABLE places ADD CONSTRAINT pk_places PRIMARY KEY (place_id);
CREATE INDEX idx01_places ON places (place_name);
ALTER TABLE places ADD CONSTRAINT fk01_places FOREIGN KEY (county_id) REFERENCES
counties (county_id);

61
Figure 35: Uspostalcodes database with entities created, displayed in SQL Server Management Studio
Populating a database
Now, the database needs to be populated with data. Three datasets will be used.
• A SQL script with all country states.
• A SQL script with all counties belonging to each state.
• A SQL script with all places, postal codes, and their geographic references.
Due the length limitations of this book, it’s not possible to display these scripts here. These
three scripts (states:table,sql, us_counties.sql, us_places.sql) are available in the
code samples package, which can be downloaded here.
The following figure shows the states table after it has been populated with the scripts.

62
Figure 36: States table, after being populated with data
Displaying database changes in LINQPad
As discussed in the “The Connection context menu” section of Chapter 4, a set of context
menu’s commands are available for any connection displayed in the LINQPad user interface. In
order to view all changes made to the uspostalcodes database, the user should right-click
anywhere in the window, then select the Refresh command from the context menu. Now, the
entities created in SQL Server Management Studio will appear on the screen.

63
Figure 37: Uspostalcodes database entities, displayed in LINQPad user interface
Retrieving rows from a table
At this point, it’s assumed that all tables are filled up with data. However, all the examples
discussed in this section use the States table.
Returning a certain number of rows
The Take method returns a row set that is as large as the integer value passed as a parameter.
To get the first 15 rows from the States table, select C# Expression from the Language
selector, and select the .SQLEXPRESS.sa.uspostalcodes connection from the Connection
selector. After that, type and execute the following code.
Code Listing 10
States.Take(15)
The output for the previous code is displayed in Figure 38.

64
Figure 38: The first 15 rows from States table
Even though the States table has only three columns, note that in the previous figure a fourth
column with the value of Counties is displayed in the result. Reviewing the script that creates
all entities in the database, you can see that there’s a SQL statement with a foreign key
definition that uses the Counties table. This foreign key references the table States using the
column named State_id. So, when the Take method is executed, LINQ-to-SQL finds the
reference automatically, and LINQPad creates a hyperlink to the Counties table. This hyperlink
is created for each row retrieved by the method. If the user clicks on any of these hyperlinks,
LINQPad will display a row set from the Counties table where the State_id column value
matches in both the States and Counties tables.
Note: When using LINQ-to-SQL, LINQPad automatically finds all references for
the tables that are being part of the query. This means that when the user clicks
on a related table hyperlink and the rows for that table are displayed, a nested
reference hyperlink could be shown if another relation is found.
Using lambda expressions
The term lambda expression comes from lambda calculus, which is a mathematical notation
applied for defining functions. These expressions are created using the following syntax.

65
Code Listing 11
(input parameters) => statement block or expression
An example of a lambda expression is displayed in the following code snippet.
Code Listing 12
y => y * 3
In the previous sample, the lambda expression specifies a parameter named y, and the
statement for this expression multiplies the value of the parameter by 3.
When a lambda expression is used within a query operator, it is evaluated by this query
operator upon demand. This Boolean query evaluation is applied to all those elements in the
input sequence, and only those elements that meet the filter condition are passed into the
appended function. The following sample fetches the odd values from a given array and
calculates and average for all of them.
Code Listing 13
int[] numbers = {1,1,2,3,5,8,13,21,34};
double average = numbers.Where(number => number % 2 == 1).Average();
Console.WriteLine(average);
In the previous example, the lambda expression within the Where method is evaluated for all
numbers in the list. Each one of these numbers is used to obtain the remainder after being
divided by two. If the result of the operation is equal to 1, the number evaluated will be
considered for the Average method. The result obtained is displayed in the following snippet.
Code Listing 14
7.3333333
Sorting rows
As in the Average calculation sample, a lambda expression can be used by LINQ-to-SQL query
operators. The following code takes the first 15 rows from the States table and sort those rows
using the values stored in the State_name column.
Code Listing 15
States.Take(15).OrderBy(row => row.State_name)
In this case, the lambda expression used in the OrderBy method takes a parameter named row,
which receives each of the 15 rows returned by the Take method, in a one-by-one sequence.
The statement executed in the expression sends the value of the State_name column to the
OrderBy method for each row. When the row sequence ends, the OrderBy method performs an
alphabetical sort for all of them, based on the values received.
The output for the previous code is shown in Figure 39.

66
Figure 39: The result for the query with rows sorted
Using aggregate functions
LINQPad allows you to use SQL aggregate functions such as Count, Sum, or Avg (average), as
a LINQ-to-SQL query methods. Each one of these methods is treated as an extension method
for each table in the model. Assuming that all tables have already been populated with data, the
following sample will retrieve the total row count for the Places table.
Code Listing 16
Places.Count()
The output displayed should look like the following snippet.
Code Listing 17
43563

67
Lambda expressions can also be used to limit the results returned by a query. For example, if
you need to know the number of places belonging to the county with the id 1926, you should
execute the following code.
Code Listing 18
Places.Count(row => row.County_id == 1926)
Again, the lambda expression takes a row argument and executes a Boolean comparison
statement, which will return true for every row that has a value of 1926 in the County_id
column. Every time a true value is returned, the Count method increments its result by 1. If
there’s no row that matches the Boolean statement, LINQPad returns nothing.
The output displayed should be the following:
Code Listing 19
24
Note: The Sum and Average (Avg) query methods require the use of lambda
expressions.
Filtering and grouping rows
LINQPad allows you to filter and group rows with LINQ-to-SQL expressions using the following
methods.
• Where: Takes a lambda expression that returns a Boolean true or false value, which
will tell the method which elements must be included in the query’s result.
• GroupBy: Takes a lambda expression that returns a value to group the rows. Then,
returns an IQueryable collection of IGrouping objects. That is, a collection of groups.
A special property named Key is added to each one of these groups. This property holds
the value used to group the rows. The group itself is a collection of data rows taken from
the entity that uses the method.
An example for filtering rows
Assuming that a list of all places belonging to a county with the id 1926 is required, the
following code should be executed.
Code Listing 20
Places.Where(row => row.County_id == 1926)
The Where method will iterate the Places table in a sequence, and the lambda expression will
receive each row as a parameter. Then, it will return a true value for those rows where the
value of County_id column is equal to 1926. A true value tells the Where method to include the
row in the query’s result. A false value will cause the Where method to discard the row.

68
The result for the previous code is shown in Figure 40.
Figure 40: The filtered query result
An example for grouping rows
The example explained in the previous section returns a row set based on the value for the
County_id column. Now, it’s going to be assumed that the user wants to retrieve all rows from
the Places table, but grouped by county. This can be accomplished executing the following
code.
Code Listing 21
Places.GroupBy(row => row.County_id)

69
The example uses the GroupBy method for the Places table. The method takes a lambda
expression that returns the value for the County_id column. This value will be used to group
the rows for the entire table. So, all rows that have the same value for County_id will be
gathered in the same collection. The total number of collections depends on how many different
values for County_id are in the table. Figure 41 shows a partial result for the query.
Figure 41: Result for the GroupBy method

70
Note that in Figure 41, the value for the Key property is highlighted. Since the County_id
column is of type integer, the property also takes this type. So, the result returned by the query
is an IGrouping<Int32, Places> collection, as displayed in the same figure.
Querying for specific columns
All queries discussed until now display all columns belonging to the table inquired. But LINQ-to-
SQL allows us to choose a specific set of columns to be returned by a query. This task can be
accomplished by using the Select method. The following sample returns the Place_id,
Place_name, and Postal_code from the Places table.
Code Listing 22
Places.Select(row => new {row.Place_id, row.Place_name, row.Postal_code})
The Select method uses a lambda expression to query a table as a sequence, which is the
Places table in this case. The row parameter of the lambda expression takes one row from the
table at a time. The statement in the lambda expression is executed for each row passed to the
parameter, and creates a new item for an IOrderedQueryTable<> collection. This item is
populated with the contents of the Place_id, Place_name, and Postal_code columns.
A partial result of the previous query is shown in Figure 42.
Figure 42: A query with specific columns

71
Putting all together
All methods explained in the previous sections can be used together in order to retrieve more
complex results.
The following code returns the columns Place_id, Place_name, and Postal_code for all
places that belongs to the county with an id of 1926.
Code Listing 23
Places.Where(row => row.County_id == 1926).Select(row => new {row.Place_id,
row.Place_name, row.Postal_code})
The previous example uses both the Where and Select methods to compose the result. In this
case, the Where method will ensure that the Select method only inquires those rows with a
value of 1926 for the County_id column. The Select method, as explained in the previous
section, will read the table as a sequence and make an IOrderedQueryTable<> collection. All
items for this collection will be populated with the values of Place_id, Place_name, and
Postal_code columns.
The results displayed by the previous query are not sorted in any way, so the OrdeBy method
can be used to display the results sorted by any of the columns given.
The following code will sort the result based on the value for the Place_name column.
Code Listing 24
Places.Where(row => row.County_id == 1926).OrderBy(row =>
row.Place_name).Select(row => new {row.Place_id, row.Place_name, row.Postal_code})
The previous sample uses the OrderBy method to sort the rows returned by the Where method.
The Select method reads the rows after being sorted, creating an IOrderedQueryTable<>
collection with the values of the Place_id, Place_name, and Postal_code columns.
LINQ-to-SQL with multiple statements
LINQPad also allows you to perform LINQ-to-SQL queries using multiple statements. To
execute these kinds of queries, you should select C# Statements from the Language selector
combo box.
Code Listing 25
var places = Places.GroupBy(row => row.County_id);
var placesSorted = from place in places orderby place.Key
select place;
placesSorted.Dump();

72
The previous code returns a collection of rows grouped by using the value contained in the
County_id column. This collection is stored in the places variable. The from statement used in
the second line of code takes each group from places variable, in a one-by-one sequence. Each
group is stored in the place variable, and the select statement adds the group to a collection.
The collection is stored in the placesSorted variable. The orderby statement sorts the
collection using the Key property value of each place group.
The PredicateBuilder class
LINQPad includes a special class called PredicateBuilder. This class is a powerful LINQ
expression that simplifies queries programming when too many filter parameters are used. The
class solves this issue by writing dynamic query statements based on the result of lambda
expressions supplied to a set of special methods that are intended to act as logical comparison
operators. The PredicateBuilder is a generic class, which means it can receive any entity
reference of the database used by a connection. The use of the PredicateBuilder class
results in much better performance and minimizes the amount of code to be written for filters
implementation.
Using PredicateBuilder class for writing queries requires you to reference the class in
LINQPad. To do this, press F4 and check the Include PredicateBuilder check box, as shown
in the following figure.

73
Figure 43: Query Properties dialog box, including PredicateBuilder class
Next, click OK. LINQPad will now be able to use the class in the current query.
Note: The Include PredicateBuilder check box must be checked every time a new
query is written.
A query that uses PredicateBuilder
The following sample assumes that the user wants to get all counties with a value between 1
and 19 in the State_id column.
Code Listing 26
var resultSet = Counties.Where(row => (row.State_id > 0 && row.State_id <
20));
resultSet.Dump();

74
The previous code looks like any of the previous samples discussed in this book, and it works
fine for getting the results desired. But if the user wants to apply a more complex filter condition,
the lambda expression within the Where method will increase in code. At this point, the query
will become more difficult to maintain.
The PredicateBuilder class solves the problem stated in the previous paragraph by being in
charge of dynamically building the lambda expression for the Where clause. So, the user will not
need to hard-code the expression within the Where clause. Instead, an instance of the
PredicateBuilder class is passed to the Where method, and this instance it creates the
lambda expression needed for the method to work. Now the code for the previous query will
look like the following sample.
Code Listing 27
var predicate = PredicateBuilder.False<Counties>();
predicate = predicate.Or(row => row.State_id > 0);
predicate = predicate.And(row => row.State_id < 20);
var resultSet = Counties.Where(predicate);
resultSet.Dump();
As displayed in the previous code, the first line creates an instance of the PredicateBuilder
class, referencing the Counties table. Then, the query calls the Or method of the
PredicateBuilder class and passes to it a lambda expression. This expression returns every
row with a value greater than 0 for the State_id column. The next line uses the And method to
establish the other part of the filter condition. In this case, the expression will return every row
with a value less than 20 for the State_id column. Now the instance of the PredicateBuilder
class is passed to the Where method instead of the lambda expression, because this instance
will be in charge of building that expression when the method is executed.
Note: For proper building of a lambda expression, the Or method must be called
first.
Maybe for a simple expression, like the one discussed in the samples of this section, using the
PredicateBuilder class turns the code in more lines. But as the filter condition becomes more
complex, the code turns simpler. The following code adds another filter condition to the query.
Code Listing 28
predicate = predicate.Or(row => row.State_id > 0);
predicate = predicate.And(row => row.State_id < 20);
predicate = predicate.Or(row => row.County_name.Contains("Orange"));
resultSet.Dump();
As noted in the previous sample, the result for the query will return all rows that contain the
phrase Orange in the County_name column, other than all rows in which the State_id column
has a value greater than 0 and less than 20. The lambda expression that the predicate instance
will create is the following.

75
Code Listing 29
row => (row.State_id > 0 && row.State_id < 20) ||
row.County_name.Contains("Orange")
As noted in the previous sample, the expression is a little more complex, and if the user wants
to retrieve rows that match more filter criteria, this expression would be larger. So, repeatedly
calling the And or the Or method is easier than creating complex expressions.
A multiple keyword search
Sometimes you want to search rows in a database based on one or more keywords. Using a
lambda expression for this purpose could make the query’s code complex and hard to maintain.
So, instead of hard-coding the lambda expression, a PredicateBuilder instance can be
employed to perform the search dynamically, as in the following sample.
Code Listing 30
var keywords = new List<string> {"Orange","York","Fernando"};
foreach (string keyword in keywords)
{
predicate = predicate.Or(row => row.County_name.Contains(keyword));
}
resultSet.Dump();
The previous code performs a search in the Counties table based on the keywords stored in
the keywords variable, which is a list of strings. A PredicateBuilder instance is created and
the Or method is called repeatedly using a foreach loop. For each item in the list, the Or
method receives a lambda expression, which returns a true or a false value, whether the
keyword is contained in the County_name column or not.
The predicate is used by the Where method associated to the Counties table, and returns all
rows that contains any of the keywords in the list as a result.
Chapter summary
This chapter discussed how to create database queries with LINQPad using the default LINQ-
to-SQL driver. All samples explained in this chapter use a database named uspostalcodes. To
create this database, the Add connection hyperlink is used to call the Choose Data Context
dialog box to select the LINQ-to-SQL driver. Then, the LINQ to SQL Connection dialog allows
you to create the uspostalcodes database.

76
There is no way to create database entities with LINQ-to-SQL, so you’ll use Microsoft SQL
Server Management Studio to create the database tables. Once they’re created, you’ll use a
series of scripts to populate tables with data.
LINQ-to-SQL has a series of methods that retrieve rows from a given table. For example, the
Take method returns a row set as large as the value of the integer parameter passed to the
method as a parameter, and the OrderBy method allows you to sort the rows returned by a
query.
Some methods require a lambda expression in order to work properly. The term lambda
expression comes from lambda calculus, which is a mathematical notation applied for defining
functions. A lambda expression is composed by a parameter, and an expression that takes the
parameter and uses it to return a value.
The methods that use lambda expressions are: OrderBy (to sort rows), Where (to filter rows
based on a conditional expression), Sum (to summarize the value of a given column), Average
(to get an average from a series of values of a given column), and GroupBy (to group rows
based on the value of a given column).
LINQ-to-SQL queries can be written as a C# expression or as several C# statements,
depending on the user’s needs.
LINQPad provides a special class named PredicateBuilder. This class is intended to simplify
query-writing when a complex filter condition is needed. The class solves this issue providing a
set of special methods intended to act as logical comparison operators. Because
PredicateBuilder is a generic class, it can receive any entity reference of the database used
by a connection.
The value of the PredicateBuilder class comes from its ability to build any lambda expression
dynamically, when the instance of the class is passed to any LINQ-to-SQL method. The
expression is created using the values passed to the class instance using either the And or Or
methods, which should be called repeatedly before using the instance.
Writing queries that use the PredicateBuilder class requires you to reference this class in
LINQPad. This can be done by pressing F4 and checking the Include PredicateBuilder check
box that appears in the Query Properties dialog box. You need to perform this action every
time you write a new query.

77
Chapter 6 LINQPad as a Code Scratchpad
One of the best uses of LINQPad is as a test and prototyping tool. As mentioned in the
“Languages available in LINQPad” section of Chapter 4, LINQPad allows you to run code in the
C#, F#, and VB languages. So no matter which of those languages you employ for
development, LINQPad will be useful.
This book relies entirely on the C# programming language, so all code testing or prototyping will
be written in C#.
How C# code can be executed in LINQPad
C# code can be written in LINQPad in three different ways:
• As an expression: A single-line C# expression with no semicolon is executed.
• As statements: Several C# lines of code are executed. Each line must end with a
semicolon.
• As a program: LINQPad automatically adds a Main method to the query in order to
execute statements or another methods or classes within the method. The methods or
classes to execute can be defined after the closing brace of the Main method is created.
Testing a C# expression
Sometimes when a program is being coded, there’s a need to test small pieces of code to
ensure they will provide the expected result. One of these pieces of code is an expression.
The following example assumes that you need to test an expression that converts the actual
DateTime value to a string, according to the XML Schema format.
Code Listing 31
XmlConvert.ToString(DateTime.Now,XmlDateTimeSerializationMode.Unspecified)
The static ToString method of the XmlConvert class is used to make the DateTime value
conversion. This value is passed to the method as the first parameter. The second parameter
passed to the method is the XmlDateTimeSerializationMode.Unspecified enumeration
value. This value tells the ToString method that the time zone for the actual date and time
should be ignored. The result is displayed in the following snippet.
Code Listing 32
2016-06-12T18:55:08.0376168

78
Executing C# statements
In the output generated in the sample explained in previous section, note that the seconds part
of the converted DateTime value is returned with fractional parts of the seconds value. If the
desired result is expected without those fractions, an additional statement should be executed to
remove them from the string. Thus, a C# Statements query should be written to solve this topic.
Code Listing 33
var xmlschemaDatetime =
XmlConvert.ToString(DateTime.Now,XmlDateTimeSerializationMode.Unspecified);
xmlschemaDatetime = xmlschemaDatetime.Substring(0,xmlschemaDatetime.IndexOf("."));
xmlschemaDatetime.Dump();
The previous code sample corresponds to a C# Statements query. Unlike with a C# Expression
query, writing C# Statements queries requires you to declare variables in order to assign the
results coming from methods or calculations. The Dump method must be included to display the
final results that come up from the queries.
The query displayed in the previous example uses the Substring and the IndexOf methods of
the string class in order to remove the fractions from the seconds part of the converted
DateTime value.
The expected result must contain no decimal fractions, so the Substring method needs to take
only those characters before the decimal point. The IndexOf method is used to calculate the
position of the decimal point. Because strings are zero-based indexed, if the decimal point
appears in the 19th position, it really is the 20th character (20 – 1 = 19) of the string. Thus, if this
is the case, the Substring method must take 19 characters, and that is exactly the number
returned by the IndexOf method.
The result is displayed the following snippet.
Code Listing 34
2016-06-12T18:55:08
Running a C# program
The third way C# code can be executed in a LINQPad query is similar to how we run a C#
Program. When this kind of query is selected from the Language Selector combo box, LINQPad
automatically creates a Main method, which will serve as an entry point for the query.
A C# Program query may work for testing or prototyping pieces of code that might be part of a
bigger project. Once these pieces of code pass all tests, they can be part of a Visual Studio
solution. This practice can save you time, because you don’t need to build another project for
testing purposes. Even so, parts of the solution to be delivered could exist before the solution
itself is created in Visual Studio.
The following code is a C# Program query version of the C# Statements query explained in the
previous section.

79
Code Listing 35
void Main()
{
var convertedDateTime = toXmlSchemaDateTime(DateTime.Now);
convertedDateTime.Dump();
}
// Define other methods and classes here
public string toXmlSchemaDateTime(DateTime currentDateTime)
{
xmlschemaDatetime =
xmlschemaDatetime.Substring(0,xmlschemaDatetime.IndexOf("."));
return (xmlschemaDatetime);
}
As noted in the previous example, the conversion process is now delegated to a program-
defined method named toXmlSchemaDateTime. The method definition is written under the Main
method’s definition, as suggested by LINQPad by way of the comment added to the code. This
approach allows you to convert any DateTime value to its XmlSchema equivalent, not only the
current system’s DateTime.
Now, the Main method creates a variable and calls the toXmlSchemaDateTime method with the
value of the current system’s DateTime. The Dump method displays the result.
An example for a test workbench usage
As mentioned in the previous section, the ability to test parts of code before being part of a
solution makes LINQPad robust and powerful. In this section, it’s going to be assumed that a
class for managing DateTime values needs to be tested before the developer puts the code into
a Visual Studio solution. A query for this purpose should look like the following sample.
Code Listing 36
void Main()
{
var dateTimeManager = new DateTimeManager();
dateTimeManager.toXmlSchemaDateTime(DateTime.Now).Dump("toXmlSchemaDateTime
method");
dateTimeManager.backNDays(DateTime.Now,3).Dump("backNDays method");
dateTimeManager.forwardNDays(DateTime.Now,15).Dump("forwardNDays method");
}
public class DateTimeManager
{
public string toXmlSchemaDateTime(DateTime currentDateTime)
{

80
xmlschemaDatetime =
xmlschemaDatetime.Substring(0,xmlschemaDatetime.IndexOf("."));
return (xmlschemaDatetime);
}
public DateTime backNDays(DateTime currentDateTime, int daysToGoBack)
{
return
(currentDateTime.Subtract(TimeSpan.FromDays(daysToGoBack)));
}
public DateTime forwardNDays(DateTime currentDateTime, int daysToGoBack)
{
return (currentDateTime.Add(TimeSpan.FromDays(daysToGoBack)));
}
}
The previous code shows a class named DateTimeManager. The class has three methods:
• toXmlSchemaDateTime: Converts a DateTime value to a string complying with the format
defined by the XmlSchema.
• backNDays: Returns a DateTime value, which is a given number of days before the
DateTime value passed to the method.
• forwardNDays: Returns a DateTime value, which is a given number of days after the
DateTime value passed to the method.
The previous code shows how all methods for the class can be tested at the same time. This is
done by creating an instance of the class and calling each of the methods, along with Dump. A
string is passed to each Dump call in order to identify the result for each one of the methods
tested.
The output for the query is displayed in the following sample.
Code Listing 37
toXmlSchemaDateTime method
2016-08-03T19:05:05
backNDays method
7/31/2016 7:05:05 PM
forwardNDays method
8/18/2016 7:05:05 PM
If the results are as expected, the class code can be added to the solution.

81
Measuring query performance
When LINQPad is used for testing purposes, another important issue is measuring code
performance. A common way to measure performance is by adding time-managing statements,
and performing subtract operations.
LINQPad gives the user a very simple solution for this issue: every time a query execution is
completed, the amount of time spent to get the results is displayed in the status bar.
Figure 44: Time consumed by query’s execution
As noted in Figure 44, the precision for performance measuring falls into milliseconds.

82
Referencing custom and default assemblies
LINQPad also allows the use of custom assemblies in queries. You can reference these
assemblies in a query by selecting the Query Properties command from the Query menu.
Figure 45: The Query Properties command
Another way to reference the assemblies is by pressing the F4 key, as the previous figure
suggests. Whichever method you use, the Query Properties dialog box will be displayed so that
you can add the needed references.

83
Figure 46: Query Properties dialog box
The dialog box provides a group of buttons that should be used to add an assembly reference to
the query. The purpose for each of these buttons will be explained in the following sections.
Picking up an assembly from the system
The Add Custom Assembly References dialog box is employed to choose an assembly from
those available in the system. To bring up this dialog, click the Add button located in the Query
Properties dialog box. The Add Custom Assembly References dialog box displays all
assemblies found in the system. You can select one or more of these by clicking on the name of
the desired assemblies and pressing the Ctrl or Shift keys as you would in the Windows File
Explorer.

84
Figure 47: Add Custom Assembly References dialog box
As noted in Figure 47, the dialog box also provides a search bar, which allows you to filter the
assemblies listing by their full or partial names.
There are two check boxes to the right of the search bar. The first one tells LINQPad if the
assemblies installed in the Global Assembly Cache (GAC) will be included in the list (checked)
or not (unchecked). The other one restricts the assemblies listing only to their latest versions
(checked), or tells LINQPad to include all installed versions for each one of them (unchecked).
Note: The Global Assembly Cache (GAC) is the location of the computer that will
store all assemblies designated to be shared by several applications. The GAC is
typically located at C:WindowsMicrosoft.NETassembly.
The Browse button, located at the bottom of the dialog box, lets allows you to search an
assembly within the computer’s file system.
The Refresh button, also located at the bottom of the dialog box, lets you refresh the assemblies
listing to include recently installed assemblies.

85
Choosing an assembly directly from the computer’s file system
You can choose an assembly from the computer’s file system without displaying the Add
Custom Assembly References dialog box. You can do this by clicking the Browse button in the
Query Properties dialog box. Now, the use can locate the desired assembly and click Open to
pick it up. For the purposes of this book, a class library project named customassembly was
created in the C:LINQPad_Succinctly folder.
Figure 48: Picking up the custom assembly library
Once the assembly is opened, its name appears in the Query Properties dialog box. You can
accept the selection by clicking OK, or you can tell LINQPad that the assembly should be used
by the current query and all those created after this one. To do this, click Set as default for
new queries.

86
Figure 49: The Query Properties dialog box after selecting the assembly
Importing namespaces into queries
When a developer writes a C# program and needs to employ a class or method located in
another namespace, this program usually starts with the following statements.
Code Listing 38
using System.Drawing;
using System.Net;
using System.Windows.Forms;
The action performed by the using statements is called importing namespaces and allows the
developer to employ all classes exposed in the namespaces declared by each one. Of course,
the assemblies that contain these namespaces must be referenced in the project in order to
make each using statement work properly.
In all previous samples where an assembly reference was added, when a class or method
contained in that assembly was needed, it had to be written in a fully qualified form. That is, the
name of the namespace that contains the class or method is written before the name of the
method itself, followed by a period.

87
Code Listing 39
var image = Util.Image(new
System.Net.WebClient().DownloadData("https://www.linux.com/sites/all/themes/custom/
lcom/logo.png")); //The WebClient method is used in the form of
System.Net.WebClient(), where System.Net is the namespace which contains the method
image.Dump();
In the previous sample, the WebClient method is coded using its fully qualified name. In this
case, the namespace that contains the method is System.Net. The namespace declaration
cannot be omitted when the method is invoked. If this happens, LINQPad will trigger an error
message upon the query’s execution because it won’t know where exactly the WebClient
method is located. This will occur even when the reference to the assembly containing the
namespace is added. This issue can be solved by importing the namespace into the query.
However, the using statement cannot be employed in LINQPad queries. Instead, the Query
Properties dialog box and the Additional Namespace imports tab should be used.
Figure 50: The Additional Namespace Imports tab
Figure 50 shows the Additional Namespace Imports tab within the Query Properties dialog box.
A multiline text box is available in order to write the name for each namespace to be imported
on a separate line. A hyperlink named Pick from assemblies is also available. When this
hyperlink is clicked, a list with all referenced assemblies in the query appears on the right.

88
Figure 51: The Query Properties dialog box after Pick from assemblies is clicked
As displayed in Figure 51, the Namespaces list, which appears under the Assemblies list,
shows all available namespaces within the assembly selected. This is a multi-select list, so
several namespaces can be chosen at the same time. This multi selection can be done by using
the Ctrl + click or the Shift + click combinations, as in the Windows File Explorer.
Clicking OK will import the selected namespaces into the query. If you want this selection to be
available for all new queries, click Set as default for new queries before importing the
namespaces.
Now, the code for the query should look like the following sample.
Code Listing 40
WebClient().DownloadData("https://www.linux.com/sites/all/themes/custom/lcom/logo.p
ng"));
image.Dump();

89
As noted in the previous sample, the namespace declaration was omitted. There won’t be an
error message when the query is executed because the namespace for the WebClient method
was previously imported into the query.
Unleashing Dump’s power
As explained in Chapter 4, the Dump extension method is capable of rendering almost any type
of object to generate output that will be displayed on the screen. This section will explore some
powerful ways to use the Dump method.
Testing the appearance of a Windows form control
Sometimes, when a developer is building a custom controls assembly, it is necessary to see
how those controls will look before releasing the project. The developer might write another
project for testing purposes, which consumes time and effort.
With LINQPad, this time and effort can be downsized significantly, because LINQPad allows us
to write a series of statements along with the Dump method, in order to prototype a control. In
this case, the Dump method will render the control and displays it in the Results panel. The
developer can run the statements over and over, until the desired results are presented. Then,
the code can be added to the project.
The following sample prototypes a CustomButton class, and displays that custom button in the
Results panel.
Code Listing 41
void Main()
{
var custombutton = new CustomButton();
custombutton.Dump();
}
public class CustomButton : System.Windows.Forms.Button
{
public CustomButton()
{
Text = "Custom Button Class";
Font = new System.Drawing.Font("Segoe UI",12);
}
}
This is a C# Program query, which defines a CustomButton class under its Main method. An
instance for this custom class is created in the Main method, and the variable that stores the
instance uses the Dump method to display the button.

90
Note: The previous example needs the System.Windows.Forms and
System.Drawing assemblies to be referenced, as explained in the "Referencing
custom and default assemblies" section of this chapter.
The output produced by the previous query is displayed in Figure 52.
Figure 52: The custom button displayed in the Results panel
As exposed in Figure 52, the Dump method renders the button, which is displayed in the Results
panel.
The CustomButton class with a different approach
The following code prototypes the CustomButton class with a few changes.
Code Listing 42
void Main()
{
var custombutton = new CustomButton();
custombutton.Dump();
}

91
public class CustomButton : System.Windows.Forms.Button
{
public CustomButton()
{
FlatStyle = System.Windows.Forms.FlatStyle.Flat;
BackColor = System.Drawing.Color.FromArgb(244,152,31);
ForeColor = System.Drawing.Color.Black;
Font = new System.Drawing.Font("Segoe UI",12);
Text = "Custom Button Class Flat Version";
}
}
In this case, the class will create a flat button with an orange background and a black colored
text.
Downloading an image from a web location
The Dump method can render almost any kind of objects; images are not the exception. The
following code demonstrates how to render an image that is downloaded from a web location.
Code Listing 43
System.Net.WebClient().DownloadData("https://www.linux.com/sites/all/themes/custom/
lcom/logo.png"));
image.Dump();
The output displayed by this code is shown in Figure 53.

92
Figure 53: An image rendered by the Dump method
Note: The previous example needs the System.Net assembly to be referenced, as
explained in the "Referencing custom and default assemblies" section of this
chapter.
The Util class
LINQPad exposes a class called Util. This class has many useful methods and properties that
can be used to interact with the queries. This section will demonstrate some of the methods and
properties available in the Util class.
ClearResults method
The ClearResults method wipes out the Results panel.

93
Code Listing 44
WebClient().DownloadData("https://www.linux.com/sites/all/themes/custom/lcom/logo.p
ng"));
image.Dump();
Thread.Sleep(2000); //Stops query execution for two seconds
Util.ClearResults();
This code sample renders an image downloaded from a web location. Then, the query
execution is stopped for two seconds. After that, the ClearResults method clears the image
from the Results panel.
Cmd method
The Cmd method executes a system command and displays the result. The following sample
shows the contents of the C:LINQPad_SuccinctlyQueries folder.
Code Listing 45
Util.Cmd(“dir C:LINQPad_SuccinctlyQueries”);
The output displayed should look like the following snippet.
Code Listing 46
Volume in drive C has no label.
Volume Serial Number is AA4F-79E0
Directory of C:LINQPad_SuccinctlyQueries
06/26/2016 08:45 AM <DIR> .
06/26/2016 08:45 AM <DIR> ..
05/31/2016 12:28 PM 416 A simple query expression.linq
06/16/2016 10:19 AM 654 buttonprototype.linq
06/16/2016 11:25 AM 826 buttonprototypechanged.linq
06/24/2016 10:39 PM 1,025 catchingwpfelementevent.linq
06/21/2016 12:18 PM 1,046 cmdlineoptions.txt
06/17/2016 10:17 AM 239 CmdMethod.linq
06/22/2016 01:50 PM 43,681 cmdsymbolsample.html
06/22/2016 01:49 PM 950 cmdsymbolsample.linq
06/11/2016 02:36 PM 646 countiesortedentityframework.linq
06/10/2016 06:33 PM 989 CountiesPredicateKeywords.linq
06/10/2016 09:40 AM 909 CountiesPredicateSample.linq
06/10/2016 11:37 AM 979 CountiesPredicateSample_2.linq
06/22/2016 12:15 PM 473 custombutton.txt
13 File(s) 135,723 bytes
2 Dir(s) 65,482,702,848 bytes free

94
GetMyQueries method
The GetMyQueries method returns all the queries located in the default queries folder and
displayed under the My Queries tree view node. The method returns an IEnumerable<Query>
object. Each element in the enumeration is a reference to a Query object, which has the
following properties.
• OpenLink: Contains a hyperlink with the name of the query. When this hyperlink is
clicked, the query is opened in a separate tab.
• Location: Contains the query file’s relative path, starting from the default queries folder.
The default queries folder is considered the root folder ().
• Name: The name of the query in plain text.
• Text: The query’s code.
• Language: The kind of programming language, according to those explained in the “How
C# code can be executed in LINQPad” section of this chapter.
• FileReferences: An IEnumerable<string> object containing the full filename for all
references added to the query, as explained in the “Referencing custom and default
assemblies” section of this chapter.
• GacReferences: An IEnumerable<string> object containing the full filename for all
references from the Global Assemblies Cache (GAC) added to the query, as explained
in the “Referencing custom and default assemblies” section of this chapter.
• NamespaceImports: An IEnumerable<string> object containing the name of all
namespaces imported into the query, as explained in the “Importing namespaces into
queries” section of this chapter.
• LastModified: The date and time when the query was last updated.
The following code displays all queries available.
Code Listing 47
Util.GetMyQueries().Dump("My Queries listing");
WriteCsv method
The WriteCsv method stores the contents of an object into a CSV file. The following sample
creates a CSV file from a Where query made to the Counties table.
Code Listing 48
var csvFile = Util.CurrentQueryPath.Replace(".linq",".csv");
Util.WriteCsv(Counties.Where(row => row.State_id == 29),csvFile);
The first line of the previous code uses the CurrentQueryPath property of the Util class
(which returns the filename of the query currently running, including its absolute path) along with
the Replace method, in order to build the filename for saving the CSV contents. This filename is
stored in the csvFile variable. The WriteCsv method receives the result of querying the
Counties table that is applying the Where method, and then writes this result to the file
specified into the csvFile variable. Now, if you look into the queries default folder, you will find
a CSV file named like the query (except for the .csv extension).

95
Note: Since there’s no Dump call in the previous sample, the Results panel
displays nothing. Also, in order to retrieve the filename for the query with the
CurrentQueryPath property, this must be saved before being executed.
Run method
The Run method executes a LINQPad query from within another query, .NET program, or
Windows Service. In case of a .NET program or Windows Service, the LINQPad.exe file should
be referenced within them.
The Run method executes the query just as the command line tool lprun.exe (which will be
explained in the following chapter) would do it.
The following sample uses the Run method to execute the getmyqueries.linq query located in
the default queries folder.
Code Listing 49
const string queriesPath = @"C:LINQPad_SuccinctlyQueries";
var dummyFormat = new LINQPad.QueryResultFormat();
Util.Run(queriesPath+"getmyqueries.linq",dummyFormat).Dump();
Note: Unlike the formatted output shown when a query is executed from LINQPad
interface, the output generated by the Run method is in plain text format.
ProgressBar class
The ProgressBar class allows you to track the progress for a query’s execution, displaying a
progress bar in the Results panel.
Code Listing 50
var counties = new List<Counties>();
var totalRows = Counties.Count();
var rowIndex = 0;
var pb = new Util.ProgressBar("Querying Counties table");
pb.Dump();
foreach (var row in Counties)
{
pb.Percent = (rowIndex * 100) / totalRows;
counties.Add(row);
rowIndex++;
Thread.Sleep(2); //A small delay to watch the progress
}
pb.Percent = 100;
counties.Dump();

96
This code stores the rows from the Counties table into a List<Counties> variable named
counties, using a foreach loop. The ProgressBar class is used to display the progress of the
operation within the loop. As displayed in the code, a message can be assigned to the progress
bar when the class is instantiated.
Note that the Dump method for the instance of the ProgressBar class is called before entering
the loop. This makes the progress bar visible prior to iterate the table.
The Thread.Sleep method adds a delay of two milliseconds after adding each row to the list, in
order to make the user watch the progress of the operation.
The work performed by the ProgressBar class is shown in the following figure.
Figure 54: The progress bar displaying the advance
Progress property
The Progress property allows you to update the progress bar integrated in the status bar of
LINQPad. In this case, the progress bar is not displayed in the Results panel, and the user
cannot assign a message to it.

97
Code Listing 51
var counties = new List<Counties>();
var totalRows = Counties.Where(row => row.State_id == 29).Count();
var rowIndex = 0;
foreach (var row in Counties.Where(row => row.State_id == 29))
{
Util.Progress = (rowIndex * 100) / totalRows;
counties.Add(row);
rowIndex++;
Thread.Sleep(30); //A small delay to watch the progress
}
Util.Progress = 100;
counties.Dump();
The previous code is similar to the code used to explain the ProgressBar class, except for the
use of the Progress property. The following figure shows how the Progress property works.
Figure 55: Updating the integrated progress bar

98
Chapter summary
LINQPad has the ability to be used as a test and prototyping tool, and can run code in the C#,
F#, and VB languages.
C# code can be executed in LINQPad as a single line expression, as several C# sentences, and
as a C# program with a Main method.
LINQPad gives the user the ability to measure a query’s performance by displaying the time
consumed by query’s execution in the status bar.
Every time LINQPad executes a query, the results are displayed in a window known as the
Results panel. This window offers some useful features by way of six graphic elements: the
Options Menu drop-down button, Results View Mode options, Format Menu, Export Menu,
Unlock Results button, and Close button.
LINQPad also allows the use of custom assemblies in queries. These assemblies can be
referenced in a query by selecting the Query Properties command from the Query menu, or by
pressing the F4 key. The user can pick up an assembly from those installed in the system,
browse for a custom assembly file into the local filesystem, or add references for both. The
users of the LINQPad Premium edition can also reference NuGet packages. In the Free edition,
only those packages used in LINQPad examples can be referenced.
When custom or system assemblies are referenced in queries, the use should declare the
classes or methods belonging to those assemblies by an explicitly qualified name. That is, to
use the Button control located in the System.Windows.Forms namespace, the user should
write System.Windows.Forms.Button in order to create an instance for the class. To simplify
the way the code is written, LINQPad allows you to import namespaces into queries using the
Additional Namespace Imports tab located in the Query Properties dialog box.
The Dump method is used to display the output produced by a query. This method also has
tremendous capabilities that can help the user to render a Windows Form control and download
and render an image from a web location. In LINQPad5, the Dump method has additional
parameters to conditionally display the output in the screen.
As a final point, LINQPad exposes a static class called Util. This class has many useful
methods and properties that can be used to interact with the queries in order to run system
commands, obtain all available queries in a list, highlight the results for a query, export results to
a CSV file, or display progress bars.

99
Chapter 7 General Summary
LINQPad is a software utility intended to be used as a part of .NET applications development. It
is used for interactively querying SQL databases using LINQ, as well as interactively writing C#
code without the need for an IDE, such as Visual Studio. LINQPad supports the VB.NET, SQL,
and F# languages. LINQPad also supports Entity Framework, LINQ to Objects, LINQ to SQL,
and LINQ to XML interoperability.
There are three versions of the product: LINQPad 2.x (for .NET Framework 3.5), LINQPad 4 (for
.NET Framework 4.0/4.5), and LINQPad 5 (for .NET Framework 4.6). There are four editions for
each of these versions: Free, Pro, Developer, and Premium.
LINQPad enables extra features for the paid license versions. Some of these features include
full C#/F#/VB auto completion and tooltips, code outlining and formatting for C#/VB, built-in and
custom code snippets, and full NuGet integration.
LINQPad is a client/server application that works as one client and many servers. In this case,
the LINQPad user interface is the client, and for each query to be executed, LINQPad creates a
separate server. For communications between client and servers, LINQPad uses a customized
communications layer that runs using Windows shared memory.
LINQPad uses third-party libraries from several software publishers within the UI. These
includes Actipro’s SyntaxEditor, the SharpDevelop project, Microsoft Roslyn, and NRefactory.
The libraries from these publishers are included as embedded resources in LINQPad, so it ships
as a single executable. All updates for the product are downloaded into the application’s data
folder. Every time it’s started, LINQPad always checks to see if there’s a later signed version of
itself in the application’s data folder.
LINQPad software can be downloaded from the following locations:
• LINQPad 5
• LINQPad 4
After you download LINQPad, double-click the LINQPad4Setup.exe (or LINQPad5Setup.exe)
file to begin the installation.
The installation process is guided by a series of dialog boxes that allow you to select the
program’s location folder, files associations, icons creation, and environment variables setting
for command line support. When LINQPad installation is complete, a set of folders and files are
created that include queries, plugins, code snippets, data context drivers, connections, default
references, and user preferences.
LINQPad can also be deployed as a portable application. To accomplish this task, a special
directory structure should be created in a USB memory stick, including the linqpad.exe file
within it.

100
To start working with LINQPad, double-click on the icon placed on the Windows desktop. This
will launch the LINQPad user interface, which is the client application that will do most of the
work.
For the purposes of this book, we identified 14 graphic elements in the LINQPad user interface:
the LINQPad main menu, Connection’s tree view area, Queries and Samples tree view area,
Query code tab window area, Query code tab caption, Add New Tab button, Execute Query
button, Stop Execution button, Results View Type button, Language Selector combo box,
Connection Selector combo box, Close Tab button, Premium Features activation link, and
Status Bar.
The editor window is one of the user interface elements that can be customized. To do so,
select the Preferences command from the Edit menu, and the settings for the window can be
changed in the Editor tab of the Preferences dialog box. For the purposes of this book, the
Segoe UI font was used, and also the code line numbers were displayed, too. Font size
customization is not available because LINQPad allows the user to increase or decrease the
font size using Ctrl+Plus (increase) or Ctrl+Minus (decrease), or by using the mouse’s scroll
wheel while pressing the Ctrl key.
When working with LINQPad, a basic concept is the term query. A query is a piece of code that
can be executed immediately. All written queries are displayed beneath a tree view node called
My Queries. Physically, LINQPad stores queries in a folder named LINQPad Queries, located
into the user’s Documents folder. The location of this folder can be changed by clicking the Set
Folder hyperlink in the user interface, and browsing for a new folder in the Preferences dialog
box. All queries discussed in this book were saved in a folder named
C:LINQPad_SuccinctlyQueries.
LINQPad allows you to search queries by using a term. This can be done by clicking on the Go
to hyperlink located on the My Queries tree view node in the user interface. Then, you can type
the term in the Navigate to Query dialog box, and LINQPad will show all queries that match
that term.
LINQPad queries can be written in 10 different programming modes: C# Expression, C#
Statements, C# Program, VB Expression, VB Statement, VB Statements, VB Program, SQL,
ESQL, F# Expression, and F# Program. Each of these languages can be selected in the
Language selector combo box, located at the top of the editor window.
All query filenames are associated with the .linq file extension. Internally, a header in XML
format is added at the beginning of every query file. This header tells LINQPad which kind of
programming language is used to compile the query, the connection used by the query to
retrieve data, and which assemblies and namespaces are referenced in the query. This XML
header is not displayed in the editor window.
You can manage connections to SQL servers in the Connection’s tree view area by clicking on
the Add Connection hyperlink. Then, the Choose Data Context dialog displayed on the screen
allows you to choose which LINQPad driver will be used. For purposes of this book, the LINQ to
SQL driver (which is the default) option was chosen for all queries.

101
After the LINQPad driver is chosen, the LINQPad Connection dialog box is shown to set the
connection’s parameters. A Microsoft SQL Server connection was created, assuming that a
SQLEXPRESS instance configured with SQL Authentication security mode was installed in the
local computer.
LINQPad names a connection using the server name followed by a period and the name of the
authenticated user when SQL Authentication is chosen. If Windows Authentication is selected,
the name for the connection contains the server name only. Also, a context menu is available
for all connections displayed in LINQPad user interface. This menu appears when the user
right-clicks on a connection’s name. The menu contains a set of commands for managing the
connection, including connection properties or connection refreshing.
LINQPad can be used to create database queries employing the default LINQ-to-SQL driver.
We used a database named uspostalcodes in the samples discussed in this book. The
database was created using the Choose Data Context dialog box, along with the LINQ to SQL
Connection dialog box. Because there’s no way to create database entities with LINQ-to-SQL,
Microsoft SQL Server Management Studio was used to create the database tables and to
populate them with data.
The LINQ-to-SQL methods discussed in this book include the Take method, which returns a row
set with a specific rows number, and the OrderBy method, which sorts the rows returned by a
method. Some of these methods require a lambda expression in order to work properly. A
lambda expression is composed by a parameter and an expression, which takes the parameter
and uses it to return a value. The term lambda expression comes from lambda calculus, which
is a mathematical notation applied for defining functions. The methods discussed in this book
that use a lambda expression are: OrderBy (to sort rows), Where (to filter rows based on a
conditional expression), Sum (to summarize the value of a given column), Average (to get an
average from a series of values of a given column), and GroupBy (to group rows based on the
value of a given column).
LINQPad provides a special class named PredicateBuilder. This class is intended to simplify
queries writing when a complex filter condition is needed. The class solves this issue by
providing a set of special methods intended to act as logical comparison operators. Because
PredicateBuilder is a generic class, it can receive any entity reference of the database used
by a connection. The value proposition for the PredicateBuilder class resides in its ability to
build any lambda expression dynamically when the instance of the class is passed to any LINQ-
to-SQL method. The expression is created using the values passed to the class instance using
the And or the Or methods. Both methods should be called repeatedly before using the
instance. For using PredicateBuilder class in queries, you must add a reference to the class
into any query which employs it. This can be done by pressing F4 and checking the Include
PredicateBuilder check box that appears in the Query Properties dialog box.

102
One of the most valuable features of LINQPad is the ability to use it as a test and prototyping
tool. LINQPad can run code in the C#, F#, and VB languages for that purpose. Each one of
these languages can be executed as a single-line expression, as several sentences, and as a
program. In all cases, the performance for a given code can be measured by reading the time
consumed by the execution from the status bar. This feature allows developers to improve code
before a product’s release. LINQPad also allows the use of custom assemblies in queries.
These assemblies can be referenced by selecting the Query Properties command from the
Query menu, or by pressing the F4 key. The user can pick up an assembly from those installed
in the system, or browse for a custom assembly file into the local filesystem, or both. Users of
the LINQPad Premium edition also can reference NuGet packages, while the users of the Free
edition can reference only those packages used in LINQPad examples.
When custom or system assemblies are referenced in queries, the user should declare the
classes or methods belonging to those assemblies by an explicitly qualified name. That is, to
use the Button control located in the System.Windows.Forms namespace, the user should
write System.Windows.Forms.Button in order to create an instance for the class. To simplify
the way that the code is written, LINQPad allows you to import namespaces into queries using
the Additional Namespace Imports tab located in the Query Properties dialog box.
LINQPad uses a method called Dump to display the output produced by a query. This method
renders any kind of object, such as Windows Form control, an image from a web location, or the
results of a LINQ-to-SQL query.
Another useful class shipped with LINQPad is the Util class. This class has many useful
methods and properties that can be used to interact with queries in order to run system
commands, obtaining all available queries in a list, highlighting the results for a query, exporting
results to a CSV file, or displaying progress bars.

103
General Conclusions about LINQPad
Since LINQPad was added to our toolbox, the development process for any of our products has
improved a lot. LINQPad has helped us in various stages of the development lifecycle, such as
testing, or products prototyping. LINQPad has become a valuable tool for LINQ training,
allowing our developers to take advantage of LINQ’s features in order to create smaller and
more efficient pieces of code.
Before LINQPad, our main repository space was almost 20 percent consumed by single-use
Visual Studio projects. Most of those projects were created for testing purposes. Now, all those
projects have been transformed into LINQPad queries that can be used more than once.
Therefore, repository management has become easier, and the space consumed in our storage
devices has decreased.
Another useful thing we’ve taken advantage of is LINQPad’s ability to import data sources and
easily interact with them. Because the program allows us to manage several connections with
the power of a click, many data models can be taken from the diagrams tool to the real world,
and they can be validated in less time than those employed with traditional tools. Also, our
database designers have the power to retrieve data using LINQ-to-SQL queries, and to turn
these queries into SQL Views or Stored Procedures by simply selecting the SQL commands
automatically generated by LINQPad.
The samples that come with LINQPad have been a tremendous knowledge source, and when
these samples were not enough, downloading more samples from the web was quite easy.
In the general opinion of our development team, LINQPad is an awesome product.

104
Appendix
LINQPad keyboard shortcuts
Execution
F5 or Alt+X or Ctrl+G Execute a query
Shift+F5 Cancel an executing query
Query properties
Alt+C Change Connection
Ctrl+D Use Connection/Database selected in Schema Explorer (toggle)
Ctrl+1 through Ctrl+9 Change query language:
Ctrl+1 C# Expression
Ctrl+2 C# Statements
Ctrl+3 C# Program
Ctrl+4 VB Expression
Ctrl+5 VB Statements
Ctrl+6 VB Program
Ctrl+7 SQL

105
Ctrl+8 ESQL
Ctrl+9 F# Expression
Ctrl+0 F# Program
Window management
Ctrl+Tab Most recently activated query
Shift+Ctrl+Tab Least recently activated query
Ctrl+PageDown Next query
Ctrl+PageUp Previous query
Alt+W Show all open queries in Window
F7 View Code
Alt+Left / Alt+Right Switch between output panels
Alt+Up / Alt+Down
Alt+PageUp / Alt+PageDown
Alt+Home / Alt+End
Scroll output panels
Alt+R View/focus results
Alt+A View lambda translation
Alt+S View SQL translation
Alt+I View IL translation

106
Shift+Alt+S View Schema Explorer
F6 View My Queries / Samples
Shift+F8 Show/Hide Explorer panels
Editor
Ctrl+. Open smart tag
Ctrl+E, C or Ctrl+K, C Comment selected lines
Ctrl+E, U or Ctrl+K, U Uncomment selected lines
Ctrl+Plus Increase editor font size
Ctrl+Minus Decrease editor font size
Ctrl+F3 Find next selected
Shift+Ctrl+F3 Find previous selected
Mouse shortcuts
Middle-click query in My Queries or
Sample Queries
Open the query in a new window
Middle-click query tab Close the query
Drag database from Schema Explorer to
query
Set the query's database
Ctrl + drag database from Schema
Explorer to query
Attach additional database to query (LINQPad
Premium users)

Linq pad succinctly

More Related Content

Similar to Linq pad succinctly (20)

More from imdurgesh (20)

Recently uploaded (20)

Linq pad succinctly