LoRa technology based on health monitoring system
- 1. Scheme & Syllabus of UNDERGRADUATE DEGREE COURSE B.Tech. VII & VIII Semester Electrical Engineering Rajasthan Technical University, Kota Effective from session: 2020-21
- 2. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 2 Teaching & Examination Scheme B. Tech.: Electrical Engineering 4th Year - VII Semester SN Course Type Course Hours per Week Marks Cr Code Name L T P Exm Hrs IA ETE Total 1 PEC 7EE5-11 Wind and Solar Energy Sys- tems. 3 0 0 3 30 70 100 3 2 7EE5-12 Power Quality and FACTS 3 7EE5-13 Control System Design. 4 OE Open Elective-I 3 0 0 3 30 70 100 3 SUB TOTAL 6 0 0 60 140 200 6 PRACTICAL & SESSIONAL 5 PCC 7EE4-21 Embedded Systems Lab 0 0 4 2 60 40 100 2 6 PCC 7EE4-22 Advance control system lab 0 0 4 2 60 40 100 2 7 PSIT 7EE7-30 Industrial Training 1 0 0 60 40 100 2.5 8 7EE7-40 Seminar 2 0 0 60 40 100 2 9 SODE- CA 7EE8-00 Social Outreach, Discipline & Extra Curricular Activities 0 0 0 100 100 0.5 SUB TOTAL 3 0 8 240 260 500 6 TOTAL OF VII SEMESTER 9 0 8 300 400 700 15 L: Lecture, T: Tutorial, P: Practical, Cr: Credits ETE: End Term Exam, IA: Internal Assessment
- 3. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 3 Teaching & Examination Scheme B. Tech. : Electrical Engineering 4th Year - VIII Semester THEORY SN Course Type Course Hours per Week Marks Cr Course Code Course Name L T P Exm Hrs IA ETE Total 1 PEC 8EE4-11 HVDC Transmission Sys- tem. 3 0 0 3 30 70 100 3 2 8EE4-12 Line Commutated and ac- tive rectifiers. 3 8EE4-13 Advanced Electric Drives. 4 OE Open Elective-II 3 0 0 3 30 70 100 3 SUB TOTAL 6 0 0 60 140 200 6 PRACTICAL & SESSIONAL 5 PCC 8EE4-21 Energy Systems Lab 0 0 4 3 60 40 100 2 6 PSIT 8EE7-50 Project 3 0 0 60 40 100 7 7 SODE- CA 8EE8-00 SODECA 0 0 0 100 100 0.5 SUB TOTAL 3 0 4 120 180 300 9.5 TOTAL OF VIII SEMESTER 9 0 4 180 320 500 15.5 L: Lecture, T: Tutorial, P: Practical, Cr: Credits ETE: End Term Exam, IA: Internal Assessment
- 4. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 4 List of Open Electives for Electrical Engineering Subject Code Title Subject Code Title Open Elective - I Open Elective - II 7AG6-60.1 Human Engineering and Safety 8AG6-60.1 Energy Management 7AG6-60.2 Environmental Engineering and Disaster Management 8AG6-60.2 Waste and By-product Utiliza- tion 7AN6-60.1 Aircraft Avionic System 8AN6-60.1 Finite Element Methods 7AN6-60.2 Non-Destructive Testing 8AN6-60.2 Factor of Human Interactions 7CH6-60.1 Optimization Techniques 8CH6-60.1 Refinery Engineering Design 7CH6-60.2 Sustainable Engineering 8CH6-60.2 Fertilizer Technology 7CR6-60.1 Introduction to Ceramic Science & Technology 8CR6-60.1 Electrical and Electronic Ce- ramics 7CR6-60.2 Plant, Equipment and Fur- nace Design 8CR6-60.2 Biomaterials 7CE6-60.1 Environmental Impact Analysis 8CE6-60.1 Composite Materials 7CE6-60.2 Disaster Management 8CE6-60.2 Fire and Safety Engineering 7CS6-60.1 Quality Management/ISO 9000 8CS6-60.1 Big Data Analytics 7CS6-60.2 Cyber Security 8CS6-60.2 IPR, Copyright and Cyber Law of India 7EC6-60.1 Principle of Electronic communication 8EC6-60.1 Industrial and Biomedical ap- plications of RF Energy 7EC6-60.2 Micro and Smart System Technology 8EC6-60.2 Robotics and control 7ME6-60.1 Finite Element Analysis 8ME6-60.1 Operations Research 7ME6-60.2 Quality Management 8ME6-60.2 Simulation Modeling and Anal- ysis 7MI6-60.1 Rock Engineering 8MI6-60.1 Experimental Stress Analysis 7MI6-60.2 Mineral Processing 8MI6-60.2 Maintenance Management 7PE6-60.1 Pipeline Engineering 8PE6-60.1 Unconventional Hydrocarbon Resources 7PE6-60.2 Water Pollution control En- gineering 8PE6-60.2 Energy Management & Policy 7TT6-60.1 Technical Textiles 8TT6-60.1 Material and Human Resource Management 7TT6-60.2 Garment Manufacturing Technology 8TT6-60.2 Disaster Management
- 5. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 5 7EE5-11: WIND AND SOLAR ENERGY SYSTEM Credit: 3 Max. Marks: 100(IA:30, ETE:70) 3L+0T+0P End Term Exam: 3 Hours SN CONTENTS Hours 1 Introduction: Objective, scope and outcome of the course. 1 2 Physics of Wind Power History of wind power, Indian and Global statistics, Wind physics, Betz limit, Tip speed ratio, stall and pitch control, Wind speed statistics- probability distributions, Wind speed and power-cumulative distribution functions. 5 3 Wind Generator Topologies Review of modern wind turbine technologies, Fixed and Variable speed wind turbines, Induction Generators, Doubly-Fed Induction Generators and their characteristics, Permanent Magnet Synchronous Generators, Power electronics converters. Generator-Converter configurations, Con- verter Control. 11 4 The Solar Resource Introduction, solar radiation spectra, solar geometry, Earth Sun angles, observer Sun angles, solar day length, Estimation of solar energy avail- ability. 4 5 Solar Photovoltaic Technologies-Amorphous, monocrystalline, polycrystalline; V-I characte- ristics of a PV cell, PV module, array, Power Electronic Converters for Solar Systems, Maximum Power Point Tracking (MPPT) algorithms. Con- verter Control. 8 6 Network Integration Issues Overview of grid code technical requirements. Fault ride-through for wind farms - real and reactive power regulation, voltage and frequency operating limits, solar PV and wind farm behavior during grid distur- bances. Power quality issues. Power system interconnection experiences in the world. Hybrid and isolated operations of solar PV and wind sys- tems. 8 7 Solar Thermal Power Generation Technologies, Parabolic trough, central receivers, parabolic dish, Fres- nel, solar pond, elementary analysis. 4 TOTAL
- 6. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 6 Text/Reference Books 1 T. Ackermann, “Wind Power in Power Systems”, John Wiley and Sons Ltd., 2005. 2 G. M. Masters, “Renewable and Efficient Electric Power Systems”, John Wiley and Sons, 2004. 3 S. P. Sukhatme, “Solar Energy: Principles of Thermal Collection and Storage”, McGraw Hill, 1984. 4 H. Siegfried and R. Waddington, “Grid integration of wind energy conversion systems” John Wiley and Sons Ltd., 2006. 5 G. N. Tiwari and M. K. Ghosal, “Renewable Energy Applications”, Narosa Publi- cations, 2004. 6 J. A. Duffie and W. A. Beckman, “Solar Engineering of Thermal Processes”, John Wiley & Sons, 1991
- 7. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 7 7EE4-12: POWER QUALITY AND FACTS Credit: 3 Max. Marks: 100(IA:30, ETE:70) 3L+0T+0P End Term Exam: 3 Hours SN CONTENTS Hours 1 Introduction: Objective, scope and outcome of the course. 01 2 Transmission Lines and Series/Shunt Reactive Power Compensa- tion Basics of AC Transmission. Analysis of uncompensated AC transmis- sion lines. Passive Reactive Power Compensation. Shunt and series compensation at the mid-point of an AC line. Comparison of Series and Shunt Compensation 04 3 Thyristor-based Flexible AC Transmission Controllers (FACTS) Description and Characteristics of Thyristor-based FACTS devices: Static VAR Compensator (SVC), Thyristor Controlled Series Capacitor (TCSC), Thyristor Controlled Braking Resistor and Single Pole Single Throw (SPST) Switch. Configurations/Modes of Operation, Harmonics and control of SVC and TCSC. Fault Current Limiter. 06 4 Voltage Source Converter based (FACTS) controllers Voltage Source Converters (VSC): Six Pulse VSC, Multi-pulse and Mul- ti-level Converters, Pulse-Width Modulation for VSCs. Selective Har- monic Elimination, Sinusoidal PWM and Space Vector Modulation. STATCOM: Principle of Operation, Reactive Power Control: Type I and Type II controllers, Static Synchronous Series Compensator (SSSC) and Unified Power Flow Controller (UPFC): Principle of Operation and Control. Working principle of Interphase Power Flow Controller. Other Devices: GTO Controlled Series Compensator. Fault Current Limiter 08 5 Application of FACTS Application of FACTS devices for power-flow control and stability im- provement. Simulation example of power swing damping in a single- machine infinite bus system using a TCSC. Simulation example of voltage regulation of transmission mid-point voltage using a STATCOM. 04 6 Power Quality Problems in Distribution Systems Power Quality problems in distribution systems: Transient and Steady state variations in voltage and frequency. Unbalance, Sags, Swells, Interruptions, Wave- form Distortions: harmonics, noise, notching, dc-offsets, fluctuations. Flicker and its measurement. Tolerance of Equipment: CBEMA curve.. 04 7 DSTATCOM Reactive Power Compensation, Harmonics and Unbalance mitigation 07
- 8. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 8 in Distribution Systems using DSTATCOM and Shunt Active Filters. Synchronous Reference Frame Extraction of Reference Currents. Cur- rent Control Techniques in for DSTATCOM. 8 Dynamic Voltage Restorer and Unified Power Quality Conditioner Voltage Sag/Swell mitigation: Dynamic Voltage Restorer – Working Principle and Control Strategies. Series Active Filtering. Unified Power Quality Conditioner (UPQC): Working Principle. Capabilities and Con- trol Strategies. 06 TOTAL Text/Reference Books 1 N. G. Hingorani and L. Gyugyi, “Understanding FACTS: Concepts and Technol- ogy of FACTS Systems”, Wiley-IEEE Press, 1999. 2 K. R. Padiyar, “FACTS Controllers in Power Transmission and Distribution”, New Age International (P) Ltd. 2007. 3 T. J. E. Miller, “Reactive Power Control in Electric Systems”, John Wiley and Sons, New York, 1983. 4 R. C. Dugan, “Electrical Power Systems Quality”, McGraw Hill Education, 2012. 5 G. T. Heydt, “Electric Power Quality”, Stars in a Circle Publications, 1991
- 9. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 9 7EE5-13: CONTROL SYSTEM DESIGN Credit: 3 Max. Marks: 100(IA:30, ETE:70) 3L+0T+0P End Term Exam: 3 Hours SN CONTENTS Hours 1 Introduction : Objective, scope and outcome of the course. 1 2 Design Specifications Introduction to design problem and philosophy. Introduction to time domain and frequency domain design specification and its physical re- levance. Effect of gain on transient and steady state response. Effect of addition of pole on system performance. Effect of addition of zero on system response.. 08 3 Design of Classical Control System in the time domain Introduction to compensator. Design of Lag, lead lag-lead compensator in time domain. Feedback and Feed forward compensator design. Feedback compensa- tion. Realization of compensators. 07 4 Design of Classical Control System in frequency domain Compensator design in frequency domain to improve steady state and transient response. Feedback and Feed forward compensator design using bode diagram. 08 5 Design of PID controllers Design of P, PI, PD and PID controllers in time domain and frequency domain for first, second and third order systems. Control loop with auxiliary feedback – Feed forward control 06 6 Control System Design in state space Review of state space representation. Concept of controllability & ob- servability, effect of pole zero cancellation on the controllability & observability of the sys- tem, pole placement design through state feedback. Ackerman’s For- mula for feedback gain design. Design of Observer. Reduced order ob- server. Separation Principle. 08 7 Nonlinearities and its effect on system performance Various types of non-linearities. Effect of various non-linearities on sys- tem performance. Singular points. Phase plot analysis 03 TOTAL
- 10. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 10 Text/Reference Books 1 N. Nise, “Control system Engineering”, John Wiley, 2000. 2 I. J. Nagrath and M. Gopal, “Control system engineering”, Wiley, 2000. 3 M. Gopal, “Digital Control Engineering”, Wiley Eastern, 1988. 4 K. Ogata, “Modern Control Engineering”, Prentice Hall, 2010. 5 B. C. Kuo, “Automatic Control system”, Prentice Hall, 1995. 6 J. J. D’Azzo and C. H. Houpis, “Linear control system analysis and design (conventional and modern)”, McGraw Hill, 1995. 7 R. T. Stefani and G. H. Hostetter, “Design of feedback Control Systems”, Saunders College Pub, 1994
- 11. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 11 7EE4-21: EMBEDDED SYSTEM LAB Credit: 2 Max. Marks: 100(IA:60, ETE:40) 0L+0T+4P SN Contents 1 Introduction to Embedded Systems and their working. 2 Data transfer instructions using different addressing modes and block trans- fer. 3 Write a program for Arithmetic operations in binary and BCD-addition, sub- traction, multiplication and division and display. 4 Interfacing D/A converter & Write a program for generation of simple wave- forms such as triangular, ramp, Square etc. 5 Write a program to interfacing IR sensor to realize obstacle detector. 6 Write a program to implement temperature measurement and displaying the same on an LCD display. 7 Write a program for interfacing GAS sensor and perform GAS leakage detec- tion. 8 Write a program to design the Traffic Light System and implement the same using suitable hardware. 9 Write a program for interfacing finger print sensor. 10 Write a program for Master Slave Communication between using suitable hardware and using SPI 11 Write a program for variable frequency square wave generation using with suitable hardware. 12 Write a program to implement a PWM based speed controller for 12 V/24V DC Motor incorporating a suitable potentiometer to provide the set point.
- 12. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 12 7EE4-22: Advanced Control System Lab Credit: 2 Max. Marks: 100(IA:60, ETE:40) 0L+0T+4P SN Contents 1 Determination of transfer functions of DC servomotor and AC servomotor. 2 Time domain response of rotary servo and Linear servo (first order and second order) systems using MATLAB/Simulink. 3 Simulate Speed and position control of DC Motor 4 Frequency response of small-motion, linearized model of industrial robot (first and second order) system using MATLAB. 5 Characteristics of PID controllers using MATLAB. Design and implementation of P, PI and PID Controllers for temperature and level control systems; 6 Design and implement closed loop control of DC Motor using MAT- LAB/Simulink and suitable hardware platform. 7 Implementation of digital controller using microcontroller; 8 Design and implementation of controller for practical systems - inverted pen- dulum system. 9 To design and implement control action for maintaining a pendulum in the upright position (even when subjected to external disturbances) through LQR technique in an Arduino Mega. 10 The fourth order, nonlinear and unstable real-time control system (Pendulum & Cart Control System) 11 Mini project on real life motion control system
- 13. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 13 8EE4-11: HVDC TRANSMISSION SYSTEM Credit: 3 Max. Marks: 100(IA:30, ETE:70) 3L+0T+0P End Term Exam: 3 Hours SN CONTENTS Hours 1 Introduction: Objective, scope and outcome of the course. 01 2 dc Transmission Technology: Comparison of AC and dc Transmission (Economics, Technical Performance and Reliability). Application of DC Transmission. Types of HVdc Systems. Components of a HVdc system. Line Commutated Converter and Voltage Source Converter based sys- tems. 04 3 Analysis of Line Commutated and Voltage Source Converters: Line Commutated Converters (LCCs): Six pulse converter, Analysis neglect- ing commutation overlap, harmonics, Twelve Pulse Converters. Inverter Operation. Effect of Commutation Overlap. Expressions for average dc voltage, AC current and reactive power absorbed by the converters. Ef- fect of Commutation Failure, Misfire and Current Extinction in LCC links. Voltage Source Converters (VSCs): Two and Three-level VSCs. PWM schemes: Selective Harmonic Elimination, Sinusoidal Pulse Width Modulation. Analysis of a six pulse converter. Equations in the rotating frame. Real and Reactive power control using a VSC. 10 4 Control of HVdc Converters: Principles of Link Control in a LCCHVdc system. Control Hierarchy, Firing Angle Controls – Phase-Locked Loop, Current and Extinction Angle Control, Starting and Stopping of a Link. Higher level Controllers Power control, Frequency Control, Stability Controllers. Reactive Power Control. Principles of Link Control in a VSC HVdc system: Power flow and dc Voltage Control. Reactive Power Con- trol/AC voltage regulation 10 5 Components of HVdc systems: Smoothing Reactors, Reactive Power Sources and Filters in LCC HVdc systems DC line: Corona Effects. In- sulators, Transient Over-voltages. dc line faults in LCC systems. dc line faults in VSC systems. dc breakers. Monopolar Operation. Ground Electrodes 08 6 Stability Enhancement using HVdc Control: Basic Concepts: Power System Angular, Voltage and Frequency Stability. Power Modulation: basic principles – synchronous and asynchronous links. Voltage Stability Problem in AC/dc systems. 04 7 MTdc Links: Multi-Terminal and Multi-Infeed Systems. Series and Pa- rallel MTdc systems using LCCs. MTdc systems using VSCs. Modern Trends in HVdcTechnology. Intro- duction to Modular Multi-level Converters 04 TOTAL
- 14. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 14 Text/Reference Books 1 K. R. Padiyar, “HVDC Power Transmission Systems”, New Age International Publishers, 2011. 2 J. Arrillaga, “High Voltage Direct Current Transmission”, Peter Peregrinus Ltd., 1983. 3 E. W. Kimbark, “Direct Current Transmission”, Vol.1, Wiley-Interscience, 1971.
- 15. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 15 8EE4-12: Line-Commutated and Active PWM Rectifiers Credit: 3 Max. Marks: 100(IA:30, ETE:70) 3L+0T+0P End Term Exam: 3 Hours SN CONTENTS Hours 1 Introduction: Objective, scope and outcome of the course. 01 2 Diode rectifiers with passive filtering Half-wave diode rectifier with RL and RC loads; 1-phase full-wave di- ode rectifier with L, C and LC filter; 3-phase diode rectifier with L, C and LC filter; continuous and discontinuous conduction, input cur- rent waveshape, effect of source inductance; commutation overlap. 06 3 Thyristor rectifiers with passive filtering Half-wave thyristor rectifier with RL and RC loads; 1-phase thyristor rectifier with L and LC filter; 3-phase thyristor rectifier with L and LC filter; continuous and discontinuous conduction, input current wave- shape. 06 4 Multi-Pulse converter Review of transformer phase shifting, generation of 6-phase ac voltage from 3-phase ac, 6- pulse converter and 12-pulse converters with in- ductive loads, steady state analysis, commutation overlap, notches during commutation. 06 5 Single-phase ac-dc single-switch boost converter Review of dc-dc boost converter, power circuit of single-switch ac-dc converter, steady state analysis, unity power factor operation, closed- loop control structure. 06 6 Ac-dc bidirectional boost converter Review of 1-phase inverter and 3-phase inverter, power circuits of 1- phase and 3-phase ac-dc boost converter, steady state analysis, oper- ation at leading, lagging and unity power factors. Rectification and regenerating modes. Phasor diagrams, closed-loop control structure. 06 7 Isolated single-phase ac-dc flyback converter Dc-dc flyback converter, output voltage as a function of duty ratio and transformer turns ratio. Power circuit of ac-dc flyback converter, steady state analysis, unity power factor operation, closed loop con- trol structure. 10 TOTAL
- 16. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 16 Text/Reference Books 1 G. De, “Principles of Thyristorised Converters”, Oxford & IBH Publishing Co, 1988. 2 J.G. Kassakian, M. F. Schlecht and G. C. Verghese, “Principles of Power Elec- tronics”, AddisonWesley, 1991. 3 L. Umanand, “Power Electronics: Essentials and Applications”, Wiley India, 2009. 4 N. Mohan and T. M. Undeland, “Power Electronics: Converters, Applications and Design”, John Wiley & Sons, 2007. 5 R. W. Erickson and D. Maksimovic, “Fundamentals of Power Electronics”, Springer Science & Business Media, 2001.
- 17. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 17 8EE4-13: ADVANCED ELECTRIC DRIVES Credit: 2 Max. Marks: 100(IA:30, ETE:70 2L+0T+0P End Term Exam: 3 Hours SN CONTENTS Hours 1 Introduction: Objective, scope and outcome of the course. 01 2 Power Converters for AC drives: PWM control of inverter, selected harmonic elimination, space vector modulation, current control of VSI, three level inverter, Different topologies, SVM for 3 level inverter, Diode rectifier with boost chopper, PWM converter as line side rectifi- er, current fed inverters with self-commutated devices. Control of CSI, H bridge as a 4-Q drive. 06 3 Induction motor drives: Different transformations and reference frame theory, modeling of induction machines, voltage fed inverter control-v/f control, vector control, direct torque and flux control(DTC). 06 4 Synchronous motor drives: Modeling of synchronous machines, open loop v/f control, vector control, direct torque control, CSI fed synchronous motor drives. 04 5 Permanent magnet motor drives: Introduction to various PM mo- tors, BLDC and PMSM drive configuration, comparison, block diagrams, Speed and torque control in BLDC and PMSM 04 6 Switched reluctance motor drives: Evolution of switched reluctance motors, various topologies for SRM drives, comparison. Closed loop speed and torque control of SRM. 03 7 DSP based motion control: Use of DSPs in motion control, various DSPs available, realization of some basic blocks in DSP for implemen- tation of DSP based motion control 04 TOTAL Text/Reference Books 1 B. K. Bose, “Modern Power Electronics and AC Drives”, Pearson Education, Asia, 2003. 2 P. C. Krause, O. Wasynczuk and S. D. Sudhoff, “Analysis of Electric Machinery and Drive Systems”, John Wiley & Sons, 2013. 3 H. A. Taliyat and S. G. Campbell, “DSP based Electromechanical Motion Con- trol”, CRC press, 2003. 4 R. Krishnan, “Permanent Magnet Synchronous and Brushless DC motor Drives”, CRC Press, 2009. 8EE4-21 Energy Systems Lab
- 18. RAJASTHAN TECHNICAL UNIVERSITY, KOTA Scheme & Syllabus IV Year- VII & VIII Semester: B. Tech. (Electrical Engineering) Scheme & Syllabus of 4th Year B. Tech. (EE) for students admitted in Session 2020-21 onwards Page 18 Credit: 2 Max. Marks: 100(IA:60, ETE:40) 0L+0T+3P End Term Exam: 3 Hours SN Contents 1 V-I characteristics of solar panels at various levels of insolation. 2 Experiment of solar Charge controller, PWM, MPPT with boost converter and algorithms. 3 Experiment on Shadowing effect and diode based solution in1kWpSolar PV System. 4 Study of wind turbine generators with DC generators, DFIG, PMSG etc. 5 Performance Study of Solar Flat Plate Thermal Collector Operation with Varia- tion in Mass Flow Rate and Level of Radiation. 6 Characterization of Various PV Modules Using large area Sun Simulator. 7 Study of micro-hydel pumped storage system. 8 Experiment on Fuel Cell and its operation. 9 Study of 100 kW or higher solar PV plant. 10 Study different components of Micro Grid. 11 To design and simulate hybrid wind-solar power generation system using si- mulation software. 12 Experiment on Performance Assessment of Hybrid (Solar-Wind- Battery) Pow- er System. 13 Simulation study on Intelligent Controllers for on-grid and off-grid Hybrid Power Systems.