Mike Meller Project08 Presentation
- 1. PROJECT 08: FINAL PROJECT SNOWBOARD MULTI-TOOL Mike Meller MAE 377
- 2. Introduction The product I designed is a snowboard multi-tool. It attaches to the back of the front snowboard binding. CAD models of the multi-tool, snowboard, and binding were created.
- 3. Survey of Existing Products: Comparison
- 4. Survey of Existing Products: Pros/Cons
- 5. Design Goals Lightweight Withstand low temperatures Strong and durable Easily accessible Can use with gloves on Include many necessary tools Compact
- 6. Alternate Design 1 Includes most features Very Bulky Potentially costly
- 7. Alternate Design 2 Still has most features Much more compact Material Efficient More reasonable price
- 8. Alternate Design 3 Reasonably compact Has most features Not efficient use of material
- 10. Final Snowboard Multi-Tool Design Opened view and front cover Includes additional features Efficient use of material Lower cost More ergonomic
- 11. CAD Models: Exploded Views of Snowboard Multi-Tool
- 12. CAD Models: Rendered Views of Snowboard Multi-Tool
- 13. CAD Models: Views of Snowboard Multi-Tool Holder and Binding
- 14. CAD Models: Views of Snowboard and Binding with Multi-Tool Holder Attached
- 15. CAD Models: Rendered Views of Snowboard and Binding with Multi-Tool Holder Attached
- 16. BOM Drawing: Multi-Tool and Holder
- 17. BOM Drawing: Snowboard Binding
- 18. 2D Dimension Drawing: Multi-Tool and Holder
- 19. 2D Dimension Drawing: Multi-Tool and Holder
- 20. User Manual
- 22. Conclusions Learned a lot about design process Brainstorming stages Sketching Modeling Manufacturing analyses Faced a lot of challenges Ultimately desired results met