Networking tutorial

Basic Networking Tutorial

What is a computer Network?
A network is any collection of independent computers that communicate with one another over a shared network
medium. A computer network is a collection of two or more connected computers. When these computers are joined
in a network, people can share files and peripherals such as modems, printers, tape backup drives, or CD-ROM
drives. When networks at multiple locations are connected using services available from phone companies, people
can send e-mail, share links to the global Internet, or conduct video conferences in real time with other remote users.
When a network becomes open sourced it can be managed properly with online collaboration software. As
companies rely on applications like electronic mail and database management for core business operations,
computer networking becomes increasingly more important.
Every network includes:





At least two computers Server or Client workstation.
Networking Interface Card's (NIC)
A connection medium, usually a wire or cable, although wireless communication between
networked computers and peripherals is also possible.



Network Operating system software, such as Microsoft Windows NT or 2000, Novell NetWare, Unix
and Linux.

Types of Networks:
LANs (Local Area Networks)
A network is any collection of independent computers that communicate with one another over a shared network
medium. LANs are networks usually confined to a geographic area, such as a single building or a college campus.
LANs can be small, linking as few as three computers, but often link hundreds of computers used by thousands of
people. The development of standard networking protocols and media has resulted in worldwide proliferation of LANs
throughout business and educational organizations.

WANs (Wide Area Networks)
Wide area networking combines multiple LANs that are geographically separate. This is accomplished by connecting
the different LANs using services such as dedicated leased phone lines, dial-up phone lines (both synchronous and
asynchronous), satellite links, and data packet carrier services. Wide area networking can be as simple as a modem
and remote access server for employees to dial into, or it can be as complex as hundreds of branch offices globally
linked using special routing protocols and filters to minimize the expense of sending data sent over vast distances.

Internet
The Internet is a system of linked networks that are worldwide in scope and facilitate data communication services
such

remote

1

as

login,

file

transfer,

Compiled By Sangay Yeshi

electronic

mail,

the

World

Wide

Web

and

newsgroups.


With the meteoric rise in demand for connectivity, the Internet has become a communications highway for millions of
users. The Internet was initially restricted to military and academic institutions, but now it is a full-fledged conduit for
any and all forms of information and commerce. Internet websites now provide personal, educational, political and
economic resources to every corner of the planet.

Intranet
With the advancements made in browser-based software for the Internet, many private organizations are
implementing intranets. An intranet is a private network utilizing Internet-type tools, but available only within that
organization. For large organizations, an intranet provides an easy access mode to corporate information for
employees.

MANs (Metropolitan area Networks)
The refers to a network of computers with in a City.

VPN (Virtual Private Network)
VPN uses a technique known as tunneling to transfer data securely on the Internet to a remote access server on your
workplace network. Using a VPN helps you save money by using the public
Internet instead of making long–distance phone calls to connect securely
with your private network. There are two ways to create a VPN connection,
by dialing an Internet service provider (ISP), or connecting directly to
Internet.

Categories of Network:
Network can be divided in to two main
categories:



Peer-to-peer.
Server – based.

In peer-to-peer networking there are no dedicated servers or hierarchy
among the computers. All of the computers are equal and therefore known
as peers. Normally each computer serves as Client/Server and there is no
one assigned to be an administrator responsible for the entire network.
Peer-to-peer networks are good choices for needs of small organizations
where the users are allocated in the same general area, security is not an
issue and the organization and the network will have limited growth within
the

foreseeable

2


future.


The term Client/server refers to the concept of sharing the work involved in processing data between the client
computer and the most powerful server computer.

The client/server network is the most efficient way to provide:


Databases and management of applications such as Spreadsheets, Accounting, Communications and
Document management.




Network management.
Centralized file storage.

The client/server model is basically an implementation of distributed or cooperative processing. At the heart of the
model is the concept of splitting application functions between a client and a server processor. The division of labor
between the different processors enables the application designer to place an application function on the processor
that is most appropriate for that function. This lets the software designer optimize the use of processors--providing the
greatest

possible

return

on

investment

for

the

hardware.

Client/server application design also lets the application provider mask the actual location of application function. The
user often does not know where a specific operation is executing. The entire function may execute in either the PC or
server, or the function may be split between them. This masking of application function locations enables system
implementers to upgrade portions of a system over time with a minimum disruption of application operations, while
protecting the investment in existing hardware and
software.

The OSI Model:
Open System Interconnection (OSI) reference model has
become an International standard and serves as a guide
for networking. This model is the best known and most
widely used guide to describe networking environments.
Vendors

design

network

products

based

on

the

specifications of the OSI model. It provides a description
of how network hardware and software work together in
a layered fashion to make communications possible. It
also helps with trouble shooting by providing a frame of
reference that describes how components are supposed
to

function.

There are seven to get familiar with and these are the
physical layer, data link layer, network layer, transport layer, session layer, presentation layer, and the application
layer.

3





Physical Layer, is just that the physical parts of the network such as wires, cables, and there media along
with the length. Also this layer takes note of the electrical signals that transmit data throughout system.



Data Link Layer, this layer is where we actually assign meaning to the electrical signals in the network. The
layer also determines the size and format of data sent to printers, and other devices. Also I don't want to
forget that these are also called nodes in the network. Another thing to consider in this layer is will also allow
and define the error detection and correction schemes that insure data was sent and received.




Network Layer, this layer provides the definition for the connection of two dissimilar networks.
Transport Layer, this layer allows data to be broken into smaller packages for data to be distributed and
addressed to other nodes (workstations).



Session Layer, this layer helps out with the task to carry information from one node (workstation) to another
node (workstation). A session has to be made before we can transport information to another computer.




Presentation Layer, this layer is responsible to code and decode data sent to the node.
Application Layer, this layer allows you to use an application that will communicate with say the operation
system of a server. A good example would be using your web browser to interact with the operating system
on a server such as Windows NT, which in turn gets the data you requested.

N
et
w
or
k
Ar
ch
it
ec
tu
re
s:
Et
he
rn
et
Eth
ern
et is
the
most popular physical layer LAN technology in use today. Other LAN types include Token Ring, Fast Ethernet, Fiber
Distributed Data Interface (FDDI), Asynchronous Transfer Mode (ATM) and LocalTalk. Ethernet is popular because it
strikes a good balance between speed, cost and ease of installation. These benefits, combined with wide acceptance

4



in the computer marketplace and the ability to support virtually all popular network protocols, make Ethernet an ideal
networking technology for most computer users today. The Institute for Electrical and Electronic Engineers (IEEE)
defines the Ethernet standard as IEEE Standard 802.3. This standard defines rules for configuring an Ethernet
network as well as specifying how elements in an Ethernet network interact with one another. By adhering to the
IEEE standard, network equipment and network protocols can communicate efficiently.

Fast Ethernet
For Ethernet networks that need higher transmission speeds, the Fast Ethernet standard (IEEE 802.3u) has been
established. This standard raises the Ethernet speed limit from 10 Megabits per second (Mbps) to 100 Mbps with only
minimal changes to the existing cable structure. There are three types of Fast Ethernet: 100BASE-TX for use with
level 5 UTP cable, 100BASE-FX for use with fiber-optic cable, and 100BASE-T4 which utilizes an extra two wires for
use with level 3 UTP cable. The 100BASE-TX standard has become the most popular due to its close compatibility
with the 10BASE-T Ethernet standard. For the network manager, the incorporation of Fast Ethernet into an existing
configuration presents a host of decisions. Managers must determine the number of users in each site on the network
that need the higher throughput, decide which segments of the backbone need to be reconfigured specifically for
100BASE-T and then choose the necessary hardware to connect the 100BASE-T segments with existing 10BASE-T
segments. Gigabit Ethernet is a future technology that promises a migration path beyond Fast Ethernet so the next
generation of networks will support even higher data transfer speeds.

Token Ring
Token Ring is another form of network configuration which differs from
Ethernet in that all messages are transferred in a unidirectional manner along
the ring at all times. Data is transmitted in tokens, which are passed along the
ring and viewed by each device. When a device sees a message addressed to
it, that device copies the message and then marks that message as being
read. As the message makes its way along the ring, it eventually gets back to
the sender who now notes that the message was received by the intended
device. The sender can then remove the message and free that token for use
by

others.

Various PC vendors have been proponents of Token Ring networks at different times
and thus these types of networks have been implemented in many organizations.

FDDI
FDDI (Fiber-Distributed Data Interface) is a standard for data transmission on fiber
optic lines in a local area network that can extend in range up to 200 km (124 miles).
The FDDI protocol is based on the token ring protocol. In addition to being large
geographically, an FDDI local area network can support thousands of users.

Protocols:

5



Network protocols are standards that allow computers to communicate. A protocol defines how computers identify
one another on a network, the form that the data should take in transit, and how this information is processed once it
reaches its final destination. Protocols also define procedures for handling lost or damaged transmissions or
"packets." TCP/IP (for UNIX, Windows NT, Windows 95 and other platforms), IPX (for Novell NetWare), DECnet (for
networking Digital Equipment Corp. computers), AppleTalk (for Macintosh computers), and NetBIOS/NetBEUI (for
LAN Manager and Windows NT networks) are the main types of network protocols in use today.
Although each network protocol is different, they all share the same physical cabling. This common method of
accessing the physical network allows multiple protocols to peacefully coexist over the network media, and allows the
builder of a network to use common hardware for a variety of protocols. This concept is known as "protocol
independence,"
Some Important Protocols and their job:

Protocol

Acronym

Its Job

Point-To-Point

TCP/IP

The backbone protocol of
the internet. Popular also
for

intranets

using

the

internet
Transmission

Control TCP/IP

Protocol/internet Protocol

The backbone protocol of
the internet. Popular also
for

intranets

using

the

internet
Internetwork

Package IPX/SPX

This is a standard protocol

Exchange/Sequenced Packet

for

Exchange

Operating System

NetBIOS

Extended

User NetBEUI

Interface

Novell

Network

This is a Microsoft protocol
that

doesn't

support

routing to other networks
File Transfer Protocol

FTP

Used to send and receive
files from a remote host

Hyper Text Transfer Protocol HTTP

Used for the web to send
documents

that

are

encoded in HTML.
Network File Services

NFS

Allows network nodes or
workstations

to

access

files and drives as if they
were their own.
Simple Mail Transfer Protocol SMTP

6


Used to send Email over a


network
Telnet

Used to connect to a host
and emulate a terminal
that the remote server can
recognize

Introduction to TCP/IP Networks:
TCP/IP-based networks play an increasingly important role in computer networks. Perhaps one reason for their
appeal is that they are based on an open specification that is not controlled by any vendor.

What Is TCP/IP?
TCP stands for Transmission Control Protocol and IP stands for Internet Protocol. The term TCP/IP is not limited just
to these two protocols, however. Frequently, the term TCP/IP is used to refer to a group of protocols related to the
TCP and IP protocols such as the User Datagram Protocol (UDP), File Transfer Protocol (FTP), Terminal Emulation
Protocol (TELNET), and so on.

The Origins of TCP/IP
In the late 1960s, DARPA (the Defense Advanced Research Project Agency), in the United States, noticed that there
was a rapid proliferation of computers in military communications. Computers, because they can be easily
programmed, provide flexibility in achieving network functions that is not available with other types of communications
equipment. The computers then used in military communications were manufactured by different vendors and were
designed to interoperate with computers from that vendor only. Vendors used proprietary protocols in their
communications equipment. The military had a multi vendor network but no common protocol to support the
heterogeneous equipment from different vendors

Net work Cables and Stuff:
In the network you will commonly find three types of cables used these are the, coaxial cable, fiber optic and twisted
pair.

Thick Coaxial Cable
This type cable is usually yellow in color and used in what is called thicknets, and has two conductors. This coax can
be used in 500-meter lengths. The cable itself is made up of a solid center wire with a braided metal shield and
plastic sheathing protecting the rest of the wire.

Thin Coaxial Cable

7



As with the thick coaxial cable is used in thicknets the thin version is used in thinnets. This type cable is also used
called or referred to as RG-58. The cable is really just a cheaper version of the thick cable.

Fiber Optic Cable
As we all know fiber optics are pretty darn cool and not cheap. This cable is smaller and can carry a vast amount of
information fast and over long distances.

Twisted Pair Cables
These come in two flavors of unshielded and shielded.

Shielded Twisted Pair (STP)
Is more common in high-speed networks. The
biggest difference you will see in the UTP and
STP is that the STP use's metallic shield
wrapping to protect the wire from interference.
-Something else to note about these cables is
that they are defined in numbers also. The bigger
the number the better the protection from
interference. Most networks should go with no
less than a CAT 3 and CAT 5 is most
recommended.
-Now you know about cables we need to know
about connectors. This is pretty important and
you will most likely need the RJ-45 connector.
This is the cousin of the phone jack connector
and looks real similar with the exception that the
RJ-45 is bigger. Most commonly your connector
are in two flavors and this is BNC (Bayonet Naur Connector) used in thicknets and the RJ-45 used in smaller
networks using UTP/STP.

Unshielded Twisted Pair (UTP)
This is the most popular form of cables in the network and the cheapest form that you can go with. The UTP has four
pairs of wires and all inside plastic sheathing. The biggest reason that we call it Twisted Pair is to protect the wires
from interference from themselves. Each wire is only protected with a thin plastic sheath.

Ethernet Cabling

8



Now to familiarize you with more on the Ethernet and it's cabling we need to look at the 10's. 10Base2, is considered
the thin Ethernet, thinnet, and thinwire which uses light coaxial cable to create a 10 Mbps network. The cable
segments in this network can't be over 185 meters in length. These cables connect with the BNC connector. Also as
a

note

these

unused

connection

must

have

a

terminator,

which

will

be

a

50-ohm

terminator.

10Base5, this is considered a thicknet and is used with coaxial cable arrangement such as the BNC connector. The
good side to the coaxial cable is the high-speed transfer and cable segments can be up to 500 meters between
nodes/workstations. You will typically see the same speed as the 10Base2 but larger cable lengths for more
versatility.
10BaseT, the “T” stands for twisted as in UTP (Unshielded Twisted Pair) and uses this for 10Mbps of transfer. The
down side to this is you can only have cable lengths of 100 meters between nodes/workstations. The good side to
this network is they are easy to set up and cheap! This is why they are so common an ideal for small offices or
homes.
100BaseT, is considered Fast Ethernet uses STP (Shielded Twisted Pair) reaching data transfer of 100Mbps. This
system is a little more expensive but still remains popular as the 10BaseT and cheaper than most other type
networks.

This

on

of

course

would

be

the

cheap

fast

version.

10BaseF, this little guy has the advantage of fiber optics and the F stands for just that. This arrangement is a little
more complicated and uses special connectors and NIC's along with hubs to create its network. Pretty darn neat and
not

to

cheap

on

the

wallet.

An important part of designing and installing an Ethernet is selecting the appropriate Ethernet medium. There are four
major types of media in use today: Thickwire for 10BASE5 networks, thin coax for 10BASE2 networks, unshielded
twisted pair (UTP) for 10BASE-T networks and fiber optic for 10BASE-FL or Fiber-Optic Inter-Repeater Link (FOIRL)
networks. This wide variety of media reflects the evolution of Ethernet and also points to the technology's flexibility.
Thickwire was one of the first cabling systems used in Ethernet but was expensive and difficult to use. This evolved to
thin coax, which is easier to work with and less expensive.

Network Topologies:
What is a Network topology?
A

network

topology

is

the

geometric

arrangement

of

nodes

and

cable

links

in

a

LAN,

There are three topology's to think about when you get into networks. These are the star, rind, and the bus.
Star, in a star topology each node has a dedicated set of wires connecting it to a central network hub. Since all traffic
passes through the hub, the hub becomes a central point for isolating network problems and gathering network
statistics.
Ring, a ring topology features a logically closed loop. Data packets travel in a single direction around the ring from

9



one network device to the next. Each network device acts as a repeater, meaning it regenerates the signal
Bus, the bus topology, each node (computer, server, peripheral etc.) attaches directly to a common cable. This
topology most often serves as the backbone for a network. In some instances, such as in classrooms or labs, a bus
will connect small workgroups

Collisions:
Ethernet is a shared media, so there are rules for sending packets of data to avoid conflicts and protect data integrity.
Nodes determine when the network is available for sending packets. It is possible that two nodes at different locations
attempt to send data at the same time. When both PCs are transferring a packet to the network at the same time, a
collision

will

result.

Minimizing collisions is a crucial element in the design and operation of networks. Increased collisions are often the
result of too many users on the network, which results in a lot of contention for network bandwidth. This can slow the
performance of the network from the user's point of view. Segmenting the network, where a network is divided into
different pieces joined together logically with a bridge or switch, is one way of reducing an overcrowded network.

Ethernet Products:
The standards and technology that have just been discussed help define the specific products that network managers
use to build Ethernet networks. The following text discusses the key products needed to build an Ethernet LAN.

Transceivers
Transceivers are used to connect nodes to the various Ethernet media. Most computers and network interface cards
contain a built-in 10BASE-T or 10BASE2 transceiver, allowing them to be connected directly to Ethernet without
requiring an external transceiver. Many Ethernet devices provide an AUI connector to allow the user to connect to
any media type via an external transceiver. The AUI connector consists of a 15-pin D-shell type connector, female on
the computer side, male on the transceiver side. Thickwire (10BASE5) cables also use transceivers to allow
connections.
For Fast Ethernet networks, a new interface called the MII (Media Independent Interface) was developed to offer a
flexible way to support 100 Mbps connections. The MII is a popular way to connect 100BASE-FX links to copperbased Fast Ethernet devices.

10



Network
Interface
Cards:
Network
cards,

interface
commonly

referred to as NICs,
and

are

used

to

connect a PC to a
network.

The

NIC

provides a physical
connection between
the networking cable
and the computer's
internal

bus.

Different computers
have different bus architectures; PCI bus master slots are most commonly found on 486/Pentium PCs and ISA
expansion slots are commonly found on 386 and older PCs. NICs come in three basic varieties: 8-bit, 16-bit, and 32bit. The larger the number of bits that can be transferred to the NIC, the faster the NIC can transfer data to the
network

cable.

Many NIC adapters comply with Plug-n-Play specifications. On these systems, NICs are automatically configured
without user intervention, while on non-Plug-n-Play systems, configuration is done manually through a setup program
and/or

DIP

switches.

Cards are available to support almost all networking standards, including the latest Fast Ethernet environment. Fast
Ethernet NICs are often 10/100 capable, and will automatically set to the appropriate speed. Full duplex networking is
another option, where a dedicated connection to a switch allows a NIC to operate at twice the speed.

Hubs/Repeaters:
Hubs/repeaters are used to connect together two or more Ethernet segments of any media type. In larger designs,
signal quality begins to deteriorate as segments exceed their maximum length. Hubs provide the signal amplification
required to allow a segment to be extended a greater distance. A hub takes any incoming signal and repeats it out all
ports.
Ethernet hubs are necessary in star topologies such as 10BASE-T. A multi-port twisted pair hub allows several pointto-point segments to be joined into one network. One end of the point-to-point link is attached to the hub and the
other is attached to the computer. If the hub is attached to a backbone, then all computers at the end of the twisted
pair segments can communicate with all the hosts on the backbone. The number and type of hubs in any onecollision domain is limited by the Ethernet rules. These repeater rules are discussed in more detail later.

11



Network Type

Max

Nodes Max

Distance

Per Segment

Per Segment

10BASE-T

2

100m

10BASE2

30

185m

10BASE5

100

500m

10BASE-FL

2

2000m

Adding Speed:
While repeaters allow LANs to extend beyond normal distance limitations, they still limit the number of nodes that can
be supported. Bridges and switches, however, allow LANs to grow significantly larger by virtue of their ability to
support full Ethernet segments on each port. Additionally, bridges and switches selectively filter network traffic to only
those packets needed on each segment - this significantly increases throughput on each segment and on the overall
network. By providing better performance and more flexibility for network topologies, bridges and switches will
continue to gain popularity among network managers.

Bridges:
The function of a bridge is to connect separate networks together. Bridges connect different networks types (such as
Ethernet and Fast Ethernet) or networks of the same type. Bridges map the Ethernet addresses of the nodes residing
on each network segment and allow only necessary traffic to pass through the bridge. When a packet is received by
the bridge, the bridge determines the destination and source segments. If the segments are the same, the packet is
dropped ("filtered"); if the segments are different, then the packet is "forwarded" to the correct segment. Additionally,
bridges

do

not

forward

bad

or

misaligned

packets.

Bridges are also called "store-and-forward" devices because they look at the whole Ethernet packet before making
filtering or forwarding decisions. Filtering packets, and regenerating forwarded packets enable bridging technology to
split a network into separate collision domains. This allows for greater distances and more repeaters to be used in the
total network design.

Ethernet Switches:
Ethernet switches are an expansion of the concept in Ethernet bridging. LAN switches can link four, six, ten or more
networks together, and have two basic architectures: cut-through and store-and-forward. In the past, cut-through
switches were faster because they examined the packet destination address only before forwarding it on to its
destination segment. A store-and-forward switch, on the other hand, accepts and analyzes the entire packet before
forwarding

it

to

its

destination.

It takes more time to examine the entire packet, but it allows the switch to catch certain packet errors and keep them
from propagating through the network. Both cut-through and store-and-forward switches separate a network into
collision domains, allowing network design rules to be extended. Each of the segments attached to an Ethernet
switch has a full 10 Mbps of bandwidth shared by fewer users, which results in better performance (as opposed to

12



hubs that only allow bandwidth sharing from a single Ethernet). Newer switches today offer high-speed links, FDDI,
Fast Ethernet or ATM. These are used to link switches together or give added bandwidth to high-traffic servers. A
network composed of a number of switches linked together via uplinks is termed a "collapsed backbone" network.

Routers:
Routers filter out network traffic by specific protocol rather than by packet address. Routers also divide networks
logically instead of physically. An IP router can divide a network into various subnets so that only traffic destined for
particular IP addresses can pass between segments. Network speed often decreases due to this type of intelligent
forwarding. Such filtering takes more time than that exercised in a switch or bridge, which only looks at the Ethernet
address. However, in more complex networks, overall efficiency is improved by using routers.

What is a network firewall?
A firewall is a system or group of systems that enforces an access control policy between two networks. The actual
means by which this is accomplished varies widely, but in principle, the firewall can be thought of as a pair of
mechanisms: one which exists to block traffic, and the other which exists to permit traffic. Some firewalls place a
greater emphasis on blocking traffic, while others emphasize permitting traffic. Probably the most important thing to
recognize about a firewall is that it implements an access control policy. If you don't have a good idea of what kind of
access you want to allow or to deny, a firewall really won't help you. It's also important to recognize that the firewall's
configuration, because it is a mechanism for enforcing policy, imposes its policy on everything behind it.
Administrators for firewalls managing the connectivity for a large number of hosts therefore have a heavy
responsibility.

Network Design Criteria:
Ethernets and Fast Ethernets have design rules that must be followed in order to function correctly. Maximum
number of nodes, number of repeaters and maximum segment distances are defined by the electrical and
mechanical

design

properties

of

each

type

of

Ethernet

and

Fast

Ethernet

media.

A network using repeaters, for instance, functions with the timing constraints of Ethernet. Although electrical signals
on the Ethernet media travel near the speed of light, it still takes a finite time for the signal to travel from one end of a
large Ethernet to another. The Ethernet standard assumes it will take roughly 50 microseconds for a signal to reach
its

destination.

Ethernet is subject to the "5-4-3" rule of repeater placement: the network can only have five segments connected; it
can only use four repeaters; and of the five segments, only three can have users attached to them; the other two
must

be

inter-repeater

links.

If the design of the network violates these repeater and placement rules, then timing guidelines will not be met and
the sending station will resend that packet. This can lead to lost packets and excessive resent packets, which can
slow network performance and create trouble for applications. Fast Ethernet has modified repeater rules, since the
minimum packet size takes less time to transmit than regular Ethernet. The length of the network links allows for a

13



fewer number of repeaters. In Fast Ethernet networks, there are two classes of repeaters. Class I repeaters have a
latency of 0.7 microseconds or less and are limited to one repeater per network. Class II repeaters have a latency of
0.46 microseconds or less and are limited to two repeaters per network. The following are the distance (diameter)
characteristics for these types of Fast Ethernet repeater combinations:

Fast Ethernet
No

Copper

Repeaters

One Class I Repeater
One Class II Repeater
Two

Class

II

Repeaters

Fiber

100m

412m*

200m

272m

200m

272m

205m

228m

* Full Duplex Mode 2 km

When conditions require greater distances or an increase in the number of nodes/repeaters, then a bridge, router or
switch can be used to connect multiple networks together. These devices join two or more separate networks,
allowing network design criteria to be restored. Switches allow network designers to build large networks that function
well. The reduction in costs of bridges and switches reduces the impact of repeater rules on network design.
Each network connected via one of these devices is referred to as a separate collision domain in the overall network.

Types of Servers:
Device Servers
A device server is defined as a specialized, network-based hardware device designed to perform a single or
specialized set of server functions. It is characterized by a minimal operating architecture that requires no per seat
network operating system license, and client access that is independent of any operating system or proprietary
protocol. In addition the device server is a "closed box," delivering extreme ease of installation, minimal maintenance,
and

can

be

managed

by

the

client

remotely

via

a

Web

browser.

Print servers, terminal servers, remote access servers and network time servers are examples of device servers
which are specialized for particular functions. Each of these types of servers has unique configuration attributes in
hardware or software that help them to perform best in their particular arena.

Print Servers
Print servers allow printers to be shared by other users on the network. Supporting either parallel and/or serial
interfaces, a print server accepts print jobs from any person on the network using supported protocols and manages
those

jobs

14


on

each

appropriate

printer.


Print servers generally do not contain a large amount of memory; printers simply store information in a queue. When
the desired printer becomes available, they allow the host to transmit the data to the appropriate printer port on the
server. The print server can then simply queue and print each job in the order in which print requests are received,
regardless of protocol used or the size of the job.

Multiport Device Servers
Devices that are attached to a network through a multiport device server can be shared between terminals and hosts
at both the local site and throughout the network. A single terminal may be connected to several hosts at the same
time (in multiple concurrent sessions), and can switch between them. Multiport device servers are also used to
network devices that have only serial outputs. A connection between serial ports on different servers is opened,
allowing

data

to

move

between

the

two

devices.

Given its natural translation ability, a multi-protocol multiport device server can perform conversions between the
protocols it knows, like LAT and TCP/IP. While server bandwidth is not adequate for large file transfers, it can easily
handle host-to-host inquiry/response applications, electronic mailbox checking, etc. And it is far more economical
than the alternatives of acquiring expensive host software and special-purpose converters. Multiport device and print
servers

give

their

users

greater

flexibility

in

configuring

and

managing

their

networks.

Whether it is moving printers and other peripherals from one network to another, expanding the dimensions of
interoperability or preparing for growth, multiport device servers can fulfill your needs, all without major rewiring.

Access Servers
While Ethernet is limited to a geographic area, remote users such as traveling sales people need access to networkbased resources. Remote LAN access, or remote access, is a popular way to provide this connectivity. Access
servers use telephone services to link a user or office with an office network. Dial-up remote access solutions such as
ISDN or asynchronous dial introduce more flexibility. Dial-up remote access offers both the remote office and the
remote user the economy and flexibility of "pay as you go" telephone services. ISDN is a special telephone service
that offers three channels, two 64 Kbps "B" channels for user data and a "D" channel for setting up the connection.
With ISDN, the B channels can be combined for double bandwidth or separated for different applications or users.
With asynchronous remote access, regular telephone lines are combined with modems and remote access servers to
allow users and networks to dial anywhere in the world and have data access. Remote access servers provide
connection points for both dial-in and dial-out applications on the network to which they are attached. These hybrid
devices route and filter protocols and offer other services such as modem pooling and terminal/printer services. For
the remote PC user, one can connect from any available telephone jack (RJ45), including those in a hotel rooms or
on most airplanes.

Network Time Servers
A network time server is a server specialized in the handling of timing information from sources such as satellites or
radio broadcasts and is capable of providing this timing data to its attached network. Specialized protocols such as
NTP or udp/time allow a time server to communicate to other network nodes ensuring that activities that must be

15



coordinated according to their time of execution are synchronized correctly. GPS satellites are one source of
information that can allow global installations to achieve constant timing.

IP Addressing:
An IP (Internet Protocol) address is a unique identifier for a node or host connection on an IP network. An IP address
is a 32 bit binary number usually represented as 4 decimal values, each representing 8 bits, in the range 0 to 255
(known

as

octets)

separated

by

decimal

points.

This

is

known

as

"dotted

decimal"

Example:
It

notation.

140.179.220.200

is

sometimes

useful

140

to

view

the

values

.179

in

their

binary

.220

form.
.200

10001100.10110011.11011100.11001000
Every IP address consists of two parts, one identifying the network and one identifying the node. The Class of the
address and the subnet mask determine which part belongs to the network address and which part belongs to the
node address.

Address Classes:
There are 5 different address classes. You can determine which class any IP address is in by examining the first 4
bits

of

the
begin

with

IP

Class

A

addresses

0xxx,

Class

B

addresses

begin

with

10xx,

Class

C

addresses

begin

with

Class

D

addresses

begin

Class

E

addresses

begin

or

address.

1

to

126

decimal.

or

128

to

191

decimal.

110x,

or

192

to

223

decimal.

with

1110,

or

224

to

239

decimal.

with

1111,

or

240

to

254

decimal.

Addresses beginning with 01111111, or 127 decimal, are reserved for loopback and for internal testing on a local
machine. [You can test this: you should always be able to ping 127.0.0.1, which points to yourself] Class D addresses
are reserved for multicasting. Class E addresses are reserved for future use. They should not be used for host
addresses.
Now we can see how the Class determines, by default, which part of the IP address belongs to the network (N) and
which

16

part

belongs


to

the

node

(n).


Class

A

Class

--

B

Class

NNNNNNNN.nnnnnnnn.nnnnnnn.nnnnnnn

--

C

NNNNNNNN.NNNNNNNN.nnnnnnnn.nnnnnnnn

--

NNNNNNNN.NNNNNNNN.NNNNNNNN.nnnnnnnn

In the example, 140.179.220.200 is a Class B address so by default the Network part of the address (also known as
the Network Address) is defined by the first two octets (140.179.x.x) and the node part is defined by the last 2 octets
(x.x.220.200).
In order to specify the network address for a given IP address, the node section is set to all "0"s. In our example,
140.179.0.0 specifies the network address for 140.179.220.200. When the node section is set to all "1"s, it specifies a
broadcast that is sent to all hosts on the network. 140.179.255.255 specifies the example broadcast address. Note
that this is true regardless of the length of the node section.

Private Subnets:
There are three IP network addresses reserved for private networks. The addresses are 10.0.0.0/8, 172.16.0.0/12,
and 192.168.0.0/16. They can be used by anyone setting up internal IP networks, such as a lab or home LAN behind
a NAT or proxy server or a router. It is always safe to use these because routers on the Internet will never forward
packets

coming

from

these

addresses

Subnetting an IP Network can be done for a variety of reasons, including organization, use of different physical media
(such as Ethernet, FDDI, WAN, etc.), preservation of address space, and security. The most common reason is to
control network traffic. In an Ethernet network, all nodes on a segment see all the packets transmitted by all the other
nodes on that segment. Performance can be adversely affected under heavy traffic loads, due to collisions and the
resulting retransmissions. A router is used to connect IP networks to minimize the amount of traffic each segment
must receive.

Subnet Masking
Applying a subnet mask to an IP address allows you to identify the network and node parts of the address. The
network bits are represented by the 1s in the mask, and the node bits are represented by the 0s. Performing a bitwise
logical AND operation between the IP address and the subnet mask results in the Network Address or Number.
For

example,

using

our

test

IP

10001100.10110011.11110000.11001000
11111111.11111111.00000000.00000000

address

and

the

140.179.240.200
255.255.000.000

default

Class

Default


Class

subnet

mask,

B

Class

10001100.10110011.00000000.00000000 140.179.000.000 Network Address

17

B

IP
B

Subnet

we

get:

Address
Mask


Default subnet masks:
Class

A

Class

B

Class

-

C

255.0.0.0

CIDR

-

11111111.11111111.00000000.00000000

255.255.255.0

-

11111111.00000000.00000000.00000000

255.255.0.0

-

-

-

11111111.11111111.11111111.00000000

--

Classless

InterDomain

Routing.

CIDR was invented several years ago to keep the internet from running out of IP addresses. The "classful" system of
allocating IP addresses can be very wasteful; anyone who could reasonably show a need for more that 254 host
addresses was given a Class B address block of 65533 host addresses. Even more wasteful were companies and
organizations that were allocated Class A address blocks, which contain over 16 Million host addresses! Only a tiny
percentage of the allocated Class A and Class B address space has ever been actually assigned to a host computer
on

the

Internet.

People realized that addresses could be conserved if the class system was eliminated. By accurately allocating only
the amount of address space that was actually needed, the address space crisis could be avoided for many years.
This

was

first

proposed

in

1992

as

a

scheme

called

Supernetting.

The use of a CIDR notated address is the same as for a Classful address. Classful addresses can easily be written in
CIDR

notation

(Class

A

=

/8,

Class

B

=

/16,

and

Class

C

=

/24)

It is currently almost impossible for an individual or company to be allocated their own IP address blocks. You will
simply be told to get them from your ISP. The reason for this is the ever-growing size of the internet routing table.
Just 5 years ago, there were less than 5000 network routes in the entire Internet. Today, there are over 90,000. Using
CIDR, the biggest ISPs are allocated large chunks of address space (usually with a subnet mask of /19 or even
smaller); the ISP's customers (often other, smaller ISPs) are then allocated networks from the big ISP's pool. That
way, all the big ISP's customers (and their customers, and so on) are accessible via 1 network route on the Internet.
It is expected that CIDR will keep the Internet happily in IP addresses for the next few years at least. After that, IPv6,
with 128 bit addresses, will be needed. Under IPv6, even sloppy address allocation would comfortably allow a billion
unique IP addresses for every person on earth

Examining your network with commands:
Ping
PING is used to check for a response from another computer on the network. It can tell you a great deal of
information

18

about

the

status

of

the


network

and

the

computers

you

are

communicating

with.


Ping returns different responses depending on the computer in question. The responses are similar depending on the
options
Ping

used.
uses

IP

to

request

a

response

from

the

host.

It

does

not

use

TCP

.It takes its name from a submarine sonar search - you send a short sound burst and listen for an echo - a ping coming

back.

In an IP network, `ping' sends a short data burst - a single packet - and listens for a single packet in reply. Since this
tests the most basic function of an IP network (delivery of single packet), it's easy to see how you can learn a lot from
some

`pings'.

To stop ping, type control-c. This terminates the program and prints out a nice summary of the number of packets
transmitted, the number received, and the percentage of packets lost, plus the minimum, average, and maximum
round-trip

times

of

Sample

the

packets.

ping

PING

localhost

session

(127.0.0.1):

56

data

bytes

64

bytes

from

127.0.0.1:

icmp_seq=0

ttl=255

time=2

ms

64

bytes

from

127.0.0.1:

icmp_seq=1

ttl=255

time=2

ms

64

bytes

from

127.0.0.1:

icmp_seq=2

ttl=255

time=2

ms

64

bytes

from

127.0.0.1:

icmp_seq=3

ttl=255

time=2

ms

64

bytes

from

127.0.0.1:

icmp_seq=4

ttl=255

time=2

ms

64

bytes

from

127.0.0.1:

icmp_seq=5

ttl=255

time=2

ms

64

bytes

from

127.0.0.1:

icmp_seq=6

ttl=255

time=2

ms

64

bytes

from

127.0.0.1:

icmp_seq=7

ttl=255

time=2

ms

64

bytes

from

127.0.0.1:

icmp_seq=8

ttl=255

time=2

ms

64

bytes

from

127.0.0.1:

icmp_seq=9

ttl=255

time=2

ms

localhost
10

ping
packets

transmitted,

round-trip

10

statistics

packets

min/avg/max

received,
=

0%

packet

2/2/2

loss
ms

meikro$
The Time To Live (TTL) field can be interesting. The main purpose of this is so that a packet doesn't live forever on
the network and will eventually die when it is deemed "lost." But for us, it provides additional information. We can use
the TTL to determine approximately how many router hops the packet has gone through. In this case it's 255 minus N
hops, where N is the TTL of the returning Echo Replies. If the TTL field varies in successive pings, it could indicate
that

the

successive

reply

packets

are

going

via

different

routes,

which

isn't

a

great

thing.

The time field is an indication of the round-trip time to get a packet to the remote host. The reply is measured in

19



milliseconds. In general, it's best if round-trip times are under 200 milliseconds. The time it takes a packet to reach its
destination is called latency. If you see a large variance in the round-trip times (which is called "jitter"), you are going
to see poor performance talking to the host

NSLOOKUP
NSLOOKUP is an application that facilitates looking up hostnames on the network. It can reveal the IP address of a
host

or,

using

the

IP

address,

return

the

host

name.

It is very important when troubleshooting problems on a network that you can verify the components of the
networking process. Nslookup allows this by revealing details within the infrastructure.

NETSTAT
NETSTAT is used to look up the various active connections within a computer. It is helpful to understand what
computers or networks you are connected to. This allows you to further investigate problems. One host may be
responding well but another may be less responsive.

IPconfig
This is a Microsoft windows NT, 2000 command. It is very useful in determining what could be wrong with a network.
This command when used with the /all switch, reveal enormous amounts of troubleshooting information within the
system.
Windows

2000

Host

Name

Primary

.

.

.

DNS

Node

Type

IP

IP

.

.

Suffix
.

.

Routing

.

.

.

.

Enabled.

.

.

.
.

.

.

.

.

Configuration

.

.

.
.

.

.

.

.
.

.

.

:

:

Broadcast

.

.

:

No

.

.

.

.

.

.

.

:

No

WINS

Proxy

Enabled.

.

.

.

.

.

.

.

:

No

DNS

.

.

.

.

cowder

Enabled.

Suffix
.

.

WAN

.

.

.

.

:

.

.

.

(PPP/SLIP)

Physical
DHCP
IP

Address.

.

Enabled.
Address.

Subnet
Default
DNS

Mask

.
.

20

.

.

.

.

.
.

.

.
.


.

.

:

00-53-45-00-00-00

.

.

.

.

.

.

.

.

.

.

.

.

.

.
.

.

.

.

.

.

.
.

:
Interface

.

.
.

.
.

.

.

.
.

Gateway
Servers

.

204.127.129.2

.

:

Proxy

Description

.

.

WINS

Connection-specific

.

.

.
.

.

.
.

:

.

.

.
.

.

.

.
.

No

12.90.108.123

:

255.255.255.255
:

.

:

12.90.108.125
:

12.102.244.2


21


Networking tutorial

More Related Content

What's hot (20)

Similar to Networking tutorial (20)

Recently uploaded (20)

Networking tutorial