Nitrolyser v3 ww_en_no3 tss parameters sensor_scan
0 likes37 views
The Nitro::Lyser™ II is an IoT-enabled multiparameter probe that utilizes UV-Vis spectrometry to measure water quality parameters with high precision and a fast measurement interval of 10 seconds. It features 8 GB of onboard memory for extensive data logging, automatic cleaning capabilities, and operates efficiently in terms of power consumption. The device is easy to configure through mobile WLAN connectivity and comes precalibrated for various applications in wastewater, surface water, and drinking water analysis.
![© s::can GmbH (2020)
www.s-can.at
technical specification
measuring principle UV-Vis spectrometry 190 - 750 nm
measurement interval 10 sec (configurable, depending on
application)
automatic compensation cross
sensitivities
turbidity / solids / organic
substances
precalibrated ex-works all parameters
accuracy standard solution (>1 mg/l) NO3-N: +/- 3% +1/OPL[mg/l]*
COD-KHP: +/-3% +10/OPL[mg/l]*
(* OPL … optical pathlength in mm)
access to raw signals no
reference standard distilled water
onboard memory 8 GB
integrated temperature sensor 0 ... 45 °C
resolution temperature sensor 0.1 °C
integration via con::cube V3
con::nect V3
con::lyte V5 (D-320-pro2) and
adapter cable (C-32-V3)
power supply 10 ... 18 VDC
power consumption (typical) 3 W
power consumption (sleep model) 60 mW
power consumption (max.) 20 W
interface to s::can terminals M12 RSTS 8Y (IP67), RS485,
Ethernet
interface to third party terminals con::nect V3 incl. Modbus RTU,
REST API, Modbus TCP/IP
digital interface (for cleaning
devices)
1 digital in/out
1 digital out
status information RGB LED ring
internal sensors supply voltage sensor, tilt sensor,
rotation sensor
cable length 1 m fixed cable (-010) or
7.5 m fixed cable (-075) or
15 m fixed cable (-150)
cable type PU jacket
housing material stainless steel 1.4404
window material optical path length 5 and 1 mm:
sapphire
optical path length 35 mm:
fused silica (UV-grade)
weight (min.) 3.4 kg (incl. cable)
dimensions (Ø x l) optical path length 35 mm:
44 x 473 mm / 517.5 mm
optical path length 5 mm:
44 x 457 mm / 501.5 mm
optical path length 1 mm:
44 x 453 mm / 497.5 mm
operating temperature 0 ... 45 °C
operating pressure 0 ... 3 bar
high pressure specification
(optional)
10 bar
installation / mounting submersed or in a flow cell
flow velocity 3 m/s (max.)
mechanical stability 30 Nm
ingress protection class IP68
automatic cleaning media: compressed air or autobrush
permissible pressure: 3 ... 6 bar
storage temperature -10 ... 65 °C
conformity - environmental testing EN 60721-3
conformity - EMC EN 61326-1
conformity - RoHS 2 EN 50581
standard warranty 2 years
extended warranty (optional) 3 years
municipal WWTP influent & sewer
parameter
TSS
[mg/l]
NO3-N
[mg/l]
NO3
[mg/l]
part number
nitro::lyser™ II
(2 parameters, 1 mm OPL)
min. 0 0 0 G3-N2-I-01-NO-xxx
max. 8000 100 460
nitro::lyser™ II
(2 parameters, 5 mm OPL)
min. 0 0 0 G3-N2-I-05-NO-xxx
max. 1200 16 70
municipal WWTP aeration
parameter
TS
[g/l]
NO3-N
[mg/l]
NO3
[mg/l]
part number
nitro::lyser™ II
(2 parameters, 1 mm OPL)
min. 0 0 0 G3-N2-A-01-NO-xxx
max. 20 26 110
municipal WWTP effluent
parameter
TSS
[mg/l]
NO3-N
[mg/l]
NO3
[mg/l]
part number
nitro::lyser™ II
(2 parameters, 5 mm OPL)
min. 0 0 0 G3-N2-E-05-NO-xxx
max. 600 45 190](https://image.slidesharecdn.com/nitrolyserv3wwenno3tssparameterssensorscan-210815153419/85/Nitrolyser-v3-ww_en_no3-tss-parameters-sensor_scan-2-320.jpg)
Nitrolyser v3 ww_en_no3 tss parameters sensor_scan
- 1. © s::can GmbH (2020) www.s-can.at nitro::lyser™ II - V3 ∙ measuring principle: UV-Vis spectrometry over the total range (190-750 nm) ∙ web server on board - IoT enabled, no user software is needed to configure the probe ∙ communicates directly with your mobile device WLAN ∙ 8 GB onboard memory - capacity for logging data for many years ∙ improved optical performance - revolutionary precision ∙ fast measurement interval - every 10 seconds possible ∙ extremely power efficient - sleep mode for low energy consumption ∙ multiparameter probe with 1 mm, 5 mm or 35 mm optical path length, ideal for waste water, surface water and drinking water ∙ long term stable and maintenance free in operation ∙ factory precalibrated, local multi-point calibration possible ∙ automatic cleaning with compressed air or brush 44 42 5 266,5 457 44,5 ~ Messgeräte Sonstige Daten recommended accessories part number article name B-32-xxx s::can compressor B-33-012 con::nect V3 B-44 B-44-2 cleaning valve C-32-V3 Adapter cable to connect a V3 spectrometer (M12) to V2 Terminal (MIL Plug) D-330-xxx con::cube V3 F-110-V3 carrier s::can spectrometer V3 & V2 probe, 45° F-120-V3 carrier s::can spectrometer V3 & V2 probe, vertical attachment F-48-V3 spectrometer V3 & V2 flow-cell (bypass setup), PVC S-11-xx-moni moni::tool Software nitro::lyser™ II monitors 2 of the following parameters: TSS, TS, NO3-N and NO3
- 2. © s::can GmbH (2020) www.s-can.at technical specification measuring principle UV-Vis spectrometry 190 - 750 nm measurement interval 10 sec (configurable, depending on application) automatic compensation cross sensitivities turbidity / solids / organic substances precalibrated ex-works all parameters accuracy standard solution (>1 mg/l) NO3-N: +/- 3% +1/OPL[mg/l]* COD-KHP: +/-3% +10/OPL[mg/l]* (* OPL … optical pathlength in mm) access to raw signals no reference standard distilled water onboard memory 8 GB integrated temperature sensor 0 ... 45 °C resolution temperature sensor 0.1 °C integration via con::cube V3 con::nect V3 con::lyte V5 (D-320-pro2) and adapter cable (C-32-V3) power supply 10 ... 18 VDC power consumption (typical) 3 W power consumption (sleep model) 60 mW power consumption (max.) 20 W interface to s::can terminals M12 RSTS 8Y (IP67), RS485, Ethernet interface to third party terminals con::nect V3 incl. Modbus RTU, REST API, Modbus TCP/IP digital interface (for cleaning devices) 1 digital in/out 1 digital out status information RGB LED ring internal sensors supply voltage sensor, tilt sensor, rotation sensor cable length 1 m fixed cable (-010) or 7.5 m fixed cable (-075) or 15 m fixed cable (-150) cable type PU jacket housing material stainless steel 1.4404 window material optical path length 5 and 1 mm: sapphire optical path length 35 mm: fused silica (UV-grade) weight (min.) 3.4 kg (incl. cable) dimensions (Ø x l) optical path length 35 mm: 44 x 473 mm / 517.5 mm optical path length 5 mm: 44 x 457 mm / 501.5 mm optical path length 1 mm: 44 x 453 mm / 497.5 mm operating temperature 0 ... 45 °C operating pressure 0 ... 3 bar high pressure specification (optional) 10 bar installation / mounting submersed or in a flow cell flow velocity 3 m/s (max.) mechanical stability 30 Nm ingress protection class IP68 automatic cleaning media: compressed air or autobrush permissible pressure: 3 ... 6 bar storage temperature -10 ... 65 °C conformity - environmental testing EN 60721-3 conformity - EMC EN 61326-1 conformity - RoHS 2 EN 50581 standard warranty 2 years extended warranty (optional) 3 years municipal WWTP influent & sewer parameter TSS [mg/l] NO3-N [mg/l] NO3 [mg/l] part number nitro::lyser™ II (2 parameters, 1 mm OPL) min. 0 0 0 G3-N2-I-01-NO-xxx max. 8000 100 460 nitro::lyser™ II (2 parameters, 5 mm OPL) min. 0 0 0 G3-N2-I-05-NO-xxx max. 1200 16 70 municipal WWTP aeration parameter TS [g/l] NO3-N [mg/l] NO3 [mg/l] part number nitro::lyser™ II (2 parameters, 1 mm OPL) min. 0 0 0 G3-N2-A-01-NO-xxx max. 20 26 110 municipal WWTP effluent parameter TSS [mg/l] NO3-N [mg/l] NO3 [mg/l] part number nitro::lyser™ II (2 parameters, 5 mm OPL) min. 0 0 0 G3-N2-E-05-NO-xxx max. 600 45 190