Temperature and Light Logger (UA-002-64)
0 likes622 views
This document provides instructions for using a HOBO UA-002-64 Temperature and Light Logger. It describes the logger components and specifications. It then outlines 9 steps to set up the logger, including connecting it to a computer, launching it to begin logging, checking its status, deploying it, reading out the collected data, graphing the results in HOBOware software, and exporting the data to a CSV file for further analysis in Excel. Additional resources are referenced for learning more about using the HOBOware Pro software.
Temperature and Light Logger (UA-002-64)
- 1. BuildingPerformanceModule The City University of New York New York City College Of Technology Architectural Technology Department written by Felix Rodriguez Temperature and Light Logger - UA-002-64 April 14, 2015
- 2. BuildingPerformanceModule Temperature and Light Logger - UA-002-64 Definition: This is a HOBO: UA-002-64 Temperature and Light Logger a miniature data logger that can record temperature and relative Light levels. Applications: Indoor and Outdoor environments Waterproof for Underwater measurements 2 Left click on the RED number symbol to get a brief description of the items required to use the Temperature and Light Logger. Step 1: Always refer back to the Manual when necessary just left click with you mouse. Left click with your mouse on the Specification Button to see the battery life of the logger, it’s range, and operating temperature. This would give you an idea under which conditions this logger can be used. Step 2: Connect the Logger to the PC using the USB cable to get it ready to Launch. Open the Software HOBOware Pro by clicking on the icon with a Circle and a H on your desktop. Step 3: Fig 1. HOBO: UA-002-64 Logger Components Fig 2. HOBO: UA-002-64 - Connecting to PC using a USB cable 1 Manual: UA-002-64 - Temperature & Light Logger Specs: UA-002-64 Specifications
- 3. BuildingPerformanceModule 3 How to Launch the logger to collect data. Step 4: Once Logger is connected confirm on the right hand bottom corner of the Hoboware Pro Software that it says 1 device connected. Under the Device drop-down menu select Launch to get the configuration page where you can configure the logger to start logging data. Left click on the video button to see a video on how to Launch the logger, then you can try it on your own. Video: How to Launch a Data Logger
- 4. BuildingPerformanceModule 4 Follow the Steps below to configure your logger. See the Notes that explain what certain areas are used for. Launching the Logger Step 4:
- 5. BuildingPerformanceModule 5 Configuration Page for the: U12-006 - 4 Channel Ext. Note: Every Logger has a different configuration page due to it’s different sensor capabilites. Launching the Logger Step 4:
- 6. BuildingPerformanceModule 6 Check the Status of the Logger: Once Logger has been Launched. Click on status to check and confirm that the logger has started and is recording data. Device Status Step 5:
- 7. BuildingPerformanceModule 7 See the Device Status page and look at important information such as: Is the logger logging ? How much battery is left? Device Status Step 5:
- 8. BuildingPerformanceModule 8 Logger placement on windows sill measuring temperature and Light intensity from the sun. See instructions on how to deploy the light sensor to get consis- tent data. Step 6: Logger Placement
- 9. BuildingPerformanceModule 9 Follow the steps below to Read-out the data from the logger. This will allow you to download all the data col- lected in the logger. Step 7: Read-out the data Logger Left click on the video button to see a video on how to Read-Out the logger, then you can try it on your own. Video: How to Read-Out the Data Logger
- 10. BuildingPerformanceModule 10 The Graph information below shows you the graph that is created using the Hoboware software, however you can further manipulate this data by exporting it as a CSV file to use in Excel. Step 8: Hoboware Pro Software Graphing
- 11. BuildingPerformanceModule 11 Follow the steps below to Export your data as a CSV file and use in Excel, allowing you to further manipulate the data. Step 9: Export to a CSV file
- 12. BuildingPerformanceModule 12 4- Channel Ext. Data Logger - (U12-006) Additional Information; Learn how to use HOBOware Software more in depth by left clicking on the buttons to the left. Introduction to HOBOware Pro Software part 1 Introduction to HOBOware Pro Software part 2 Introduction to HOBOware Pro Software part 3 Additional References Introduction to HOBOware Pro Software Part 1 Introduction to HOBOware Pro Software Part 2 Introduction to HOBOware Pro Software Part 3 Visit Onsetcomp.com for more information