OPM API reference guide

Oracle® Process Manufacturing
API Reference Guide
Release 12
Part No. E05081-01
April 2007

Oracle Process Manufacturing API Reference Guide, Release 12
Part No. E05081-01
Copyright © 2006, 2007, Oracle. All rights reserved.
Primary Author: Madhavi Agarwal, Harry Anthony, Samyukta Koda, Michael Laverty, Sudha Seshadri
The Programs (which include both the software and documentation) contain proprietary information; they
are provided under a license agreement containing restrictions on use and disclosure and are also protected
by copyright, patent, and other intellectual and industrial property laws. Reverse engineering, disassembly, or
decompilation of the Programs, except to the extent required to obtain interoperability with other
independently created software or as specified by law, is prohibited.
The information contained in this document is subject to change without notice. If you find any problems in
the documentation, please report them to us in writing. This document is not warranted to be error-free.
Except as may be expressly permitted in your license agreement for these Programs, no part of these
Programs may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any
purpose.
If the Programs are delivered to the United States Government or anyone licensing or using the Programs on
behalf of the United States Government, the following notice is applicable:
U.S. GOVERNMENT RIGHTS
Programs, software, databases, and related documentation and technical data delivered to U.S. Government
customers are "commercial computer software" or "commercial technical data" pursuant to the applicable
Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication,
disclosure, modification, and adaptation of the Programs, including documentation and technical data, shall
be subject to the licensing restrictions set forth in the applicable Oracle license agreement, and, to the extent
applicable, the additional rights set forth in FAR 52.227-19, Commercial Computer Software--Restricted
Rights (June 1987). Oracle Corporation, 500 Oracle Parkway, Redwood City, CA 94065.
The Programs are not intended for use in any nuclear, aviation, mass transit, medical, or other inherently
dangerous applications. It shall be the licensee's responsibility to take all appropriate fail-safe, backup,
redundancy and other measures to ensure the safe use of such applications if the Programs are used for such
purposes, and we disclaim liability for any damages caused by such use of the Programs.
The Programs may provide links to Web sites and access to content, products, and services from third parties.
Oracle is not responsible for the availability of, or any content provided on, third-party Web sites. You bear all
risks associated with the use of such content. If you choose to purchase any products or services from a third
party, the relationship is directly between you and the third party. Oracle is not responsible for: (a) the quality
of third-party products or services; or (b) fulfilling any of the terms of the agreement with the third party,
including delivery of products or services and warranty obligations related to purchased products or services.
Oracle is not responsible for any loss or damage of any sort that you may incur from dealing with any third
party.
Oracle, JD Edwards, PeopleSoft, and Siebel are registered trademarks of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective owners.

iii

Contents
Send Us Your Comments
Preface
1 Oracle Process Manufacturing APIs: General Information
Understanding Oracle Process Manufacturing APIs............................................................... 1-1
Getting API Information from the Oracle Integration Repository and the Electronic Technical
Reference Manual (eTRM)........................................................................................................ 1-2
Messages and Errors.................................................................................................................. 1-3
2 Oracle Process Manufacturing Cost Management APIs
Oracle Process Manufacturing Cost Management API Packages............................................ 2-1
Oracle Process Manufacturing Cost Management API Package Listings................................2-2
3 Oracle Process Manufacturing Process Planning APIs
Oracle Process Manufacturing Process Planning API Packages..............................................3-1
Oracle Process Manufacturing Process Planning API Package Listings................................. 3-1
4 Oracle Process Manufacturing Quality Management APIs
Oracle Process Manufacturing (OPM) Quality Management API Packages...........................4-1
Quality Management API Package Listings............................................................................. 4-2
5 Oracle E-Records APIs
Oracle E-Records API Packages................................................................................................ 5-1
Oracle E-Records API Package Listings....................................................................................5-2

iv
6 OPM Process Execution APIs
OPM Process Execution API Packages..................................................................................... 6-1
Process Execution API Package Listings...................................................................................6-1
7 OPM Product Development APIs
OPM Product Development API Packages...............................................................................7-1
OPM Product Development API Package Listings.................................................................. 7-3
Index

v

Send Us Your Comments
Oracle Process Manufacturing API Reference Guide, Release 12
Part No. E05081-01
Oracle welcomes customers' comments and suggestions on the quality and usefulness of this document.
Your feedback is important, and helps us to best meet your needs as a user of our products. For example:
• Are the implementation steps correct and complete?
• Did you understand the context of the procedures?
• Did you find any errors in the information?
• Does the structure of the information help you with your tasks?
• Do you need different information or graphics? If so, where, and in what format?
• Are the examples correct? Do you need more examples?
If you find any errors or have any other suggestions for improvement, then please tell us your name, the
name of the company who has licensed our products, the title and part number of the documentation and
the chapter, section, and page number (if available).
Note: Before sending us your comments, you might like to check that you have the latest version of the
document and if any concerns are already addressed. To do this, access the new Applications Release
Online Documentation CD available on Oracle MetaLink and www.oracle.com. It contains the most
current Documentation Library plus all documents revised or released recently.
Send your comments to us using the electronic mail address: appsdoc_us@oracle.com
Please give your name, address, electronic mail address, and telephone number (optional).
If you need assistance with Oracle software, then please contact your support representative or Oracle
Support Services.
If you require training or instruction in using Oracle software, then please contact your Oracle local office
and inquire about our Oracle University offerings. A list of Oracle offices is available on our Web site at
www.oracle.com.

vii

Preface
Intended Audience
Welcome to Release 12 of the Oracle Process Manufacturing API Reference Guide.
See Related Information Sources on page viii for more Oracle Applications product
information.
TTY Access to Oracle Support Services
Oracle provides dedicated Text Telephone (TTY) access to Oracle Support Services
within the United States of America 24 hours a day, seven days a week. For TTY
support, call 800.446.2398.
Documentation Accessibility
Our goal is to make Oracle products, services, and supporting documentation
accessible, with good usability, to the disabled community. To that end, our
documentation includes features that make information available to users of assistive
technology. This documentation is available in HTML format, and contains markup to
facilitate access by the disabled community. Accessibility standards will continue to
evolve over time, and Oracle is actively engaged with other market-leading technology
vendors to address technical obstacles so that our documentation can be accessible to all
of our customers. For more information, visit the Oracle Accessibility Program Web site
at http://www.oracle.com/accessibility/ .
Accessibility of Code Examples in Documentation
Screen readers may not always correctly read the code examples in this document. The
conventions for writing code require that closing braces should appear on an otherwise
empty line; however, some screen readers may not always read a line of text that
consists solely of a bracket or brace.

viii
Accessibility of Links to External Web Sites in Documentation
This documentation may contain links to Web sites of other companies or organizations
that Oracle does not own or control. Oracle neither evaluates nor makes any
representations regarding the accessibility of these Web sites.
Structure
1 Oracle Process Manufacturing APIs: General Information
2 Oracle Process Manufacturing Cost Management APIs
3 Oracle Process Manufacturing Process Planning APIs
4 Oracle Process Manufacturing Quality Management APIs
5 Oracle E-Records APIs
6 OPM Process Execution APIs
7 OPM Product Development APIs
Related Information Sources
Integration Repository
The Oracle Integration Repository is a compilation of information about the service
endpoints exposed by the Oracle E-Business Suite of applications. It provides a
complete catalog of Oracle E-Business Suite's business service interfaces. The tool lets
users easily discover and deploy the appropriate business service interface for
integration with any system, application, or business partner.
The Oracle Integration Repository is shipped as part of the E-Business Suite. As your
instance is patched, the repository is automatically updated with content appropriate
for the precise revisions of interfaces in your environment.
Do Not Use Database Tools to Modify Oracle Applications Data
Oracle STRONGLY RECOMMENDS that you never use SQL*Plus, Oracle Data
Browser, database triggers, or any other tool to modify Oracle Applications data unless
otherwise instructed.
Oracle provides powerful tools you can use to create, store, change, retrieve, and
maintain information in an Oracle database. But if you use Oracle tools such as
SQL*Plus to modify Oracle Applications data, you risk destroying the integrity of your
data and you lose the ability to audit changes to your data.
Because Oracle Applications tables are interrelated, any change you make using an
Oracle Applications form can update many tables at once. But when you modify Oracle
Applications data using anything other than Oracle Applications, you may change a
row in one table without making corresponding changes in related tables. If your tables
get out of synchronization with each other, you risk retrieving erroneous information

ix
and you risk unpredictable results throughout Oracle Applications.
When you use Oracle Applications to modify your data, Oracle Applications
automatically checks that your changes are valid. Oracle Applications also keeps track
of who changes information. If you enter information into database tables using
database tools, you may store invalid information. You also lose the ability to track who
has changed your information because SQL*Plus and other database tools do not keep a
record of changes.

Oracle Process Manufacturing APIs: General Information 1-1
1
Oracle Process Manufacturing APIs:
General Information
Understanding Oracle Process Manufacturing APIs
Oracle Process Manufacturing APIs import field-specific data from an existing system
into the Oracle Process Manufacturing application-specific tables. The imported
information has the same detail as if you entered it manually using the appropriate
Oracle Process Manufacturing application window. Oracle Process Manufacturing APIs
are packaged PL/SQL subprograms that you call from other PL/SQL subprograms or
anonymous blocks of code. To use these APIs, write a PL/SQL subprogram to pass the
appropriate parameters to the APIs. A typical calling subprogram also manages the
database connection, and may write to log files during execution.
Oracle Application Shared Packages
Oracle Process Manufacturing APIs use shared library objects from the Oracle
Applications Schema (FND) which also have a set of detailed error messages for
debugging purposes. Oracle ensures that the APIs function as designed, but does not
support customer generated programs that use the APIs. The Oracle Process
Manufacturing APIs call subprograms from the following standard Oracle Applications
packages:
Package Name Package Description
FND_API Contains the standard Oracle Applications
API version checking function. This is used by
the API to check for valid API version
numbers.

1-2 Oracle Process Manufacturing API Reference Guide
FND_MESSAGE Contains the standard Oracle Applications
messaging function. This is used by the stored
procedure to report status and error handling.
FND_PUB_MSG Contains the standard Oracle Applications
message retrieval function used to interrogate
the procedure messages.
These packages are installed as part of the current release. Refer to the Oracle
Applications Developers Guide for additional details.
Getting API Information from the Oracle Integration Repository and the
Electronic Technical Reference Manual (eTRM)
The Oracle Integration Repository is a compilation of information about the service
endpoints exposed by the Oracle E-Business Suite of applications. It provides a
complete catalog of the Oracle E-Business Suite business service interfaces, including
Application Program Intefaces (APIs). The tool lists the appropriate business service
interface for integration with other systems. The Oracle Integration Repository is
shipped as part of the Oracle E-Business Suite. As your instance is patched, the
repository is automatically updated with content appropriate for the precise revisions
of interfaces in your environment.
You can start the repository like any other Oracle E-Business Suite application,
provided that you are logged in as a user with sufficient permissions, such as system
administrator. From the Navigator menu, select the Integration Repository
responsibility, then click the Integration Repository link that appears.
The Integration Repository displays common API information, and the following
attributes of any APIs that you select:
• API Package Information
• API Signature Code
• API Parameters
• Name
• Mode (IN, OUT or IN OUT)
• Datatype

• Default Value
• English Language Description
Note: The Oracle Integration Repository supports the exporting of API
data into a comma-delimited (.CSV) format. Printable Page views are
also available.
For complete information on the Oracle Integration Repository refer to the Oracle
Integration Repository User's Guide or the Oracle Applications Online Help.
Important: To view the datatype of a column or the definition of a
PL/SQL Record or SQL Table that is referenced in the API using a
%TYPE, %ROWTYPE, or INDEX BY Table Type use the SQL*Plus
DESCRIBE command. You can also refer to the Oracle Applications
Electronic Technical Reference Manual [http://etrm.oracle.com] for this
information.
Using the Electronic Technical Reference Manual (eTRM)
The eTRM is an easy to use web-based utility that provides technical reference
information about the Oracle Applications data model of Oracle Applications. The
eTRM dynamic reports provide information on the tables, views, indexes, and other
structured data that make up the Oracle Applications E-Business suite. You must have
an OracleMetaLink account [http://metalink.oracle.com] to access the eTRM
[http://etrm.oracle.com].
When using the eTRM to discover detailed API parameter information (for example,
%ROWTYPE Record structure), make sure to browse the R12 FND Database Objects.
The Oracle Process Manufacturing Quality Management Tables are listed under the
GMD heading. For complete information on using the eTRM refer to the eTRM Online
Help, or the following OracleMetaLink Articles:
• ETRM DIRECT ACCESS DOCUMENT (Article 150230.1)
• ETRM Troubleshooting guide (Article 278456.1)
• ETRM QUICK START GUIDE (Article 150268.1)
Messages and Errors
When an API runs, it returns one of the following status codes which you can write to a
log:
• S for Success

• E for Error
• U for Unexpected Status
• Q for could not calculate the total input and output quantities
APIs also generate result messages. Programs calling APIs can then get the messages
from the message list, and process them. These messages are displayed by issuing them
to the user when calling the API from an interactive process, or writing them to
database tables or log files when calling the API from a batch process.
Messages are stored in an encoded format to let API callers determine message names
using the standard functions provided by the message dictionary. The structure of the
message list is private. Neither API developers nor API callers can access this list except
by calling the API message utility routines.
The following utility functions are defined in the FND_MSG_PUB package:
• Initialize - Initializes the API message list
• Add - Creates a message to the API message list
• Get - Retrieves a message from the API message list
• Count_Msg - Returns the number of messages in the API message list
• Delete - Removes one or more messages from the API message list
• Reset - Resets the index used in getting messages
• Count_And_Get - Returns the number of messages in the API message list. If this
number is one, then it also returns the message data
Refer to the Oracle Applications Developers Guide for complete documentation of these
functions and procedures for usage information.
To add a message to the API message list, use the regular message dictionary
procedures FND_MESSAGE.SET_NAME and FND_MESSAGE.SET_TOKEN to set the
message name and tokens on the message dictionary stack. Then call
FND_MSG_PUB.ADD to fetch the messages off the message dictionary stack and add it
to the API message list.
To get a message from the API message list, API callers use the procedure
FND_MSG_PUB.GET. This procedure operates in the following modes:
• First - Gets the first message in the API message list
• Next - Gets the next message in the API message list
• Last - Gets the last message in the API message list

• Previous - Gets the previous message in the API message list
• Specific - Gets a specific message from the API message list
Error Messages
If an API generates an error, then a detailed and translatable error message is returned.
You can log and interpret these messages before rerunning the API. Use the Message
Dictionary and the Messages Window to query, edit, and define error messages. Refer
to the Oracle Applications Developers Guide for complete documentation on the Message
Dictionary and the Messages Window. Edit your application messages before your
routines call them from a form, and before your users request detailed messages from a
form. Define your messages according to the Oracle Applications message standards in
the Oracle Applications Developers Guide.

Oracle Process Manufacturing Cost Management APIs 2-1
2
Oracle Process Manufacturing Cost
Management APIs
Oracle Process Manufacturing Cost Management API Packages
The following are the packages containing the OPM Cost management APIs. Confirm
that these packages are loaded in your instance so that the interfacing subprograms can
compile successfully.
GMF_ALLOCATIONDEFINITION_PUB Public level package used for creating,
updating and deleting allocation definitions.
GMF_ACTUAL_COST_ADJUSTMENT_PUB Public level package used for creating,
updating, and deleting the Actual Cost
Adjustment related costs.
GMF_ITEMCOST_PUB Public level package for OPM Item Cost API.
GMF_LOTCOSTADJUSTMENT_PUB Public level package used for creating,
updating, and deleting Lot Cost Adjustment
related costs.
GMF_BURDENDETAILS_PUB Public level package for creating, updating,
deleting, and retrieving overhead details.
GMF_RESOURCECOST_PUB Public level package for OPM Resource Cost
API.

Oracle Process Manufacturing Cost Management API Package Listings
Listed in this section are the subprograms for each Public Cost Management API
Package.
Tip: To list the parameters of an API, use the SQL*Plus command
DESCRIBE. For example, DESCRIBE
GMF_ALLOCATIONDEFINITION_PUB lists all of the parameter
information for all the APIs in the
GMF_ALLOCATIONDEFINITION_PUB package.
For English language descriptions of the parameters of each API, refer to the Oracle
Applications Integration Repository. For the structure of the database objects used to
define an API's %ROWTYPE Record parameters and INDEX BY Table of Records
parameters (previously known as PL/SQL Tables) refer to the Oracle Applications
Electronic Technical Reference Manual (eTRM).
Package: GMF_ALLOCATIONDEFINITION_PUB
API Name Subprogram Name API Description
Create Allocation
Definitions API
CREATE_ALLOCATION_
DEFINITION
Creates new allocation definitions in
the Allocation Basis table.
Delete Allocation
Definitions API
DELETE_ALLOCATION_
DEFINITION
Deletes allocation definitions from the
Allocation Basis table.
Update Allocation
Definitions API
UPDATE_ALLOCATION_
DEFINITION
Updates allocation definitions in the
Allocation Basis table.
The GMF_ALLOCATIONDEFINITION_PUB package defines and uses the following
custom PL/SQL Record Type:

TYPE Allocation_Definition_Rec_Type IS RECORD
(
alloc_id NUMBER
,
alloc_code gl_aloc_mst.alloc_code%TYPE
,
legal_entity_id gmf_legal_entities.legal_entity_id%TYPE
,
alloc_method NUMBER
,
line_no NUMBER
,
item_id NUMBER
,
item_number mtl_item_flexfields.item_number%TYPE
,
basis_account_id gl_aloc_bas.basis_account_id%TYPE,
basis_account_key gl_aloc_bas.basis_account_key%TYPE
,
balance_type NUMBER
,
bas_ytd_ptd NUMBER
,
basis_type NUMBER,
fixed_percent NUMBER
,
cmpntcls_id NUMBER
,
cost_cmpntcls_code cm_cmpt_mst.cost_cmpntcls_code%TYPE
,
analysis_code cm_alys_mst.cost_analysis_code%TYPE
,
organization_id gl_aloc_bas.organization_id%TYPE
,
organization_code mtl_parameters.organization_code%TYPE,
delete_mark gl_aloc_bas.delete_mark%TYPE
:= 0 ,
user_name fnd_user.user_name%TYPE
);
Package: GMF_ACTUAL_COST_ADJUSTMENT_PUB
Create Actual Cost
Adjustment API
CREATE_ACTUAL_COST
_ADJUSTMENT
Validates the input parameters and
starts the private actual cost
adjustment procedure for creating the
actual cost adjustment.
Delete Actual Cost
Adjustment API
DELETE_ACTUAL_COST
_ADJUSTMENT
adjustment procedure for deleting the

Get Actual Cost
Adjustment API
GET_ACTUAL_COST_AD
JUSTMENT
adjustment procedure to retrieve the
Update Actual Cost
Adjustment API
UPDATE_ACTUAL_COST
_ADJUSTMENT
adjustment procedure to update the
The GMF_ACTUAL_COST_ADJUSTMENT_PUB package defines and uses the
following custom PL/SQL Record Type:

TYPE ADJUSTMENT_REC_TYPE IS RECORD
(
organization_id CM_ADJS_DTL.ORGANIZATION_ID%TYPE,
organization_code MTL_PARAMETERS.ORGANIZATION_CODE%TYPE,
inventory_item_id CM_ADJS_DTL.INVENTORY_ITEM_ID%TYPE,
item_number MTL_ITEM_FLEXFIELDS.ITEM_NUMBER%TYPE,
cost_type_id CM_ADJS_DTL.COST_TYPE_ID%TYPE,
cost_mthd_code CM_MTHD_MST.COST_MTHD_CODE%TYPE,
period_id CM_ADJS_DTL.PERIOD_ID%TYPE,
calendar_code CM_CLDR_HDR_B.CALENDAR_CODE%TYPE,
period_code CM_CLDR_DTL.PERIOD_CODE%TYPE,
cost_cmpntcls_id CM_ADJS_DTL.COST_CMPNTCLS_ID%TYPE,
cost_cmpntcls_code CM_CMPT_MST.COST_CMPNTCLS_CODE%TYPE,
cost_analysis_code CM_ADJS_DTL.COST_ANALYSIS_CODE%TYPE,
cost_adjust_id CM_ADJS_DTL.COST_ADJUST_ID%TYPE,
adjust_qty CM_ADJS_DTL.ADJUST_QTY%TYPE,
adjust_qty_uom CM_ADJS_DTL.ADJUST_QTY_UOM%TYPE,
adjust_cost CM_ADJS_DTL.ADJUST_COST%TYPE,
reason_code CM_ADJS_DTL.REASON_CODE%TYPE,
adjust_status CM_ADJS_DTL.ADJUST_STATUS%TYPE,
creation_date CM_ADJS_DTL.CREATION_DATE%TYPE,
last_update_login CM_ADJS_DTL.LAST_UPDATE_LOGIN%TYPE,
created_by CM_ADJS_DTL.CREATED_BY%TYPE,
last_update_date CM_ADJS_DTL.LAST_UPDATE_DATE%TYPE,
last_updated_by CM_ADJS_DTL.LAST_UPDATED_BY%TYPE,
text_code CM_ADJS_DTL.TEXT_CODE%TYPE,
trans_cnt CM_ADJS_DTL.TRANS_CNT%TYPE,
delete_mark CM_ADJS_DTL.DELETE_MARK%TYPE,
request_id CM_ADJS_DTL.REQUEST_ID%TYPE,
program_application_id
CM_ADJS_DTL.PROGRAM_APPLICATION_ID%TYPE,
program_id CM_ADJS_DTL.PROGRAM_ID%TYPE,
program_update_date CM_ADJS_DTL.PROGRAM_UPDATE_DATE%TYPE,
attribute_category CM_ADJS_DTL.ATTRIBUTE_CATEGORY%TYPE,
attribute1 CM_ADJS_DTL.ATTRIBUTE1%TYPE,

adjustment_ind CM_ADJS_DTL.ADJUSTMENT_IND%TYPE,
subledger_ind CM_ADJS_DTL.SUBLEDGER_IND%TYPE,
adjustment_date CM_ADJS_DTL.ADJUSTMENT_DATE%TYPE,
user_name FND_USER.USER_NAME%TYPE
);
Package: GMF_ITEMCOST_PUB
Create Item Cost API CREATE_ITEM_COST Creates a new item cost in the Cost
Details table.
Delete Item Cost API DELETE_ITEM_COST Deletes an item cost from the Cost
Details table.
Retrieve Item Cost API GET_ITEM_COST Retrieves an item cost from the Cost
Details table.
Update Item Cost API UPDATE_ITEM_COST Updates an item cost in the Cost
Details table.
The GMF_ITEMCOST_PUB package defines and uses the following custom PL/SQL
Record Types and INDEX BY table Types:
TYPE header_rec_type IS RECORD
(
period_id cm_cmpt_dtl.period_id%TYPE,
calendar_code cm_cldr_hdr_b.calendar_code%TYPE,
period_code cm_cldr_dtl.period_code%TYPE,
cost_type_id cm_cmpt_dtl.cost_type_id%TYPE,
cost_mthd_code cm_mthd_mst.cost_mthd_code%TYPE,
organization_id cm_cmpt_dtl.organization_id%TYPE,
organization_code mtl_parameters.organization_code%TYPE,
inventory_item_id cm_cmpt_dtl.inventory_item_id%TYPE,
item_number mtl_item_flexfields.item_number%TYPE,
);

TYPE this_level_dtl_rec_type IS RECORD
(
cmpntcost_id NUMBER,
cost_cmpntcls_id NUMBER,
cost_cmpntcls_code cm_cmpt_mst.cost_cmpntcls_code%TYPE,
cost_analysis_code cm_cmpt_dtl.cost_analysis_code%TYPE,
cmpnt_cost NUMBER,
burden_ind NUMBER,
total_qty NUMBER,
costcalc_orig NUMBER,
rmcalc_type NUMBER,
delete_mark NUMBER,
attribute1 cm_cmpt_dtl.attribute1%TYPE,
attribute_category cm_cmpt_dtl.attribute_category%TYPE
);
TYPE this_level_dtl_tbl_type IS TABLE OF this_level_dtl_rec_type INDEX
BY BINARY_INTEGER;
TYPE lower_level_dtl_rec_type IS RECORD
(
cmpntcost_id NUMBER,
cost_cmpntcls_code cm_cmpt_mst.cost_cmpntcls_code%TYPE,
cmpnt_cost NUMBER,
delete_mark NUMBER
);
TYPE lower_level_dtl_tbl_type IS TABLE OF lower_level_dtl_rec_type
INDEX BY BINARY_INTEGER;

TYPE costcmpnt_ids_rec_type IS RECORD
(
cost_level NUMBER,
cmpntcost_id NUMBER
);
TYPE costcmpnt_ids_tbl_type IS TABLE OF costcmpnt_ids_rec_type INDEX
BY BINARY_INTEGER;
Package: GMF_LOTCOSTADJUSTMENT_PUB
Create Lot Cost
Adjustment API
CREATE_LOT_COST_ADJ
USTMENT
Creates lot cost adjustments in the Lot
Cost Adjustment Basis table.
Delete Lot Cost
Adjustment API
DELETE_LOT_COST_ADJ
USTMENT
Deletes lot cost adjustments from the
Lot Cost Adjustment Basis table.
Get Lot Cost Adjustment
API
GET_LOT_COST_ADJUST
MEN
Retrieves the lot cost adjustment
details.
Update Lot Cost
Adjustment API
UPDATE_LOT_COST_AD
JUSTMENT
Updates lot cost adjustments in the
Lot Cost Adjustment Basis table.
The GMF_LOTCOSTADJUSTMENT_PUB package defines and uses the following
custom PL/SQL Record Types and INDEX BY table Types:

TYPE Lc_Adjustment_Header_Rec_Type
IS
RECORD
(
adjustment_id
gmf_lot_cost_adjustments.adjustment_id%TYPE
, legal_entity_id gmf_fiscal_policies.legal_entity_id%TYPE
, cost_type_id cm_mthd_mst.cost_type_id%TYPE
, cost_mthd_code cm_mthd_mst.cost_mthd_code%TYPE
, item_id
mtl_item_flexfields.inventory_item_id%TYPE
, item_number mtl_item_flexfields.item_number%TYPE
, organization_id mtl_parameters.organization_id%TYPE
, organization_code mtl_parameters.organization_code%TYPE
, lot_number mtl_lot_numbers.lot_number%TYPE
, adjustment_date DATE
, reason_code cm_reas_cds.reason_code%TYPE
, delete_mark
gmf_lot_cost_adjustments.delete_mark%TYPE
, ATTRIBUTE1 VARCHAR2(240)
, ATTRIBUTE_CATEGORY VARCHAR2(30)
, user_name fnd_user.user_name%TYPE
);

TYPE lc_adjustment_dtls_Rec_Type
IS
RECORD
(
adjustment_dtl_id
gmf_lot_cost_adjustment_dtls.adjustment_dtl_id%TYPE
, adjustment_id
gmf_lot_cost_adjustment_dtls.adjustment_id%TYPE
, cost_cmpntcls_id cm_cmpt_mst.cost_cmpntcls_id%TYPE
, cost_cmpntcls_code cm_cmpt_mst.cost_cmpntcls_code%TYPE
, cost_analysis_code cm_alys_mst.cost_analysis_code%TYPE
, adjustment_cost
gmf_lot_cost_adjustment_dtls.adjustment_cost%TYPE
, TEXT_CODE NUMBER(22)
);
TYPE lc_adjustment_dtls_Tbl_Type
IS
TABLE OF lc_adjustment_dtls_Rec_Type
Package: GMF_BURDENDETAILS_PUB
Create Overhead Details
API
CREATE_BURDEN_DETA
ILS
Creates a new overhead detail in the
Overhead Details table.
Delete Overhead Details
API
DELETE_BURDEN_DETA
ILS
Deletes an overhead detail from the
Retrieve Overhead
Details API
GET_BURDEN_DETAILS Retrieves an overhead detail from the
Update Overhead
Details API
UPDATE_BURDEN_DET
AILS
Updates the overhead detail in the
The GMF_BURDENDETAILS_PUB package defines and uses the following custom
PL/SQL Record Types and INDEX BY table Types:

TYPE Burden_Header_Rec_Type IS RECORD
(
organization_id cm_brdn_dtl.organization_id%TYPE
,
organization_code mtl_parameters.organization_code%TYPE
,
inventory_item_id mtl_item_flexfields.inventory_item_id%TYPE
,
item_number mtl_item_flexfields.item_number%TYPE
,
period_id cm_brdn_dtl.period_id%TYPE
,
calendar_code cm_brdn_dtl.calendar_code%TYPE
,
period_code cm_brdn_dtl.period_code%TYPE
,
cost_type_id cm_brdn_dtl.cost_type_id%TYPE
,
cost_mthd_code cm_brdn_dtl.cost_mthd_code%TYPE
,
);
TYPE Burden_Dtl_Rec_Type IS RECORD
(
burdenline_id NUMBER
,
resources cr_rsrc_mst.resources%TYPE
,
cost_cmpntcls_id NUMBER
,
cost_cmpntcls_code cm_cmpt_mst.cost_cmpntcls_code%TYPE
,
cost_analysis_code cm_alys_mst.cost_analysis_code%TYPE
,
burden_usage NUMBER
,
item_qty NUMBER
,
item_uom cm_brdn_dtl.item_uom%TYPE
,
burden_qty NUMBER
,
burden_uom cm_brdn_dtl.burden_uom%TYPE
,
burden_factor NUMBER
,
delete_mark cm_brdn_dtl.delete_mark%TYPE := 0
);

TYPE Burden_Dtl_Tbl_Type IS TABLE OF Burden_Dtl_Rec_Type
TYPE Burdenline_Ids_Rec_Type IS RECORD
(
resources cm_rsrc_dtl.resources%TYPE
,
cost_cmpntcls_id NUMBER
,
cost_analysis_code cm_brdn_dtl.cost_analysis_code%TYPE
,
burdenline_id NUMBER
);
TYPE Burdenline_Ids_Tbl_Type IS TABLE OF Burdenline_Ids_Rec_Type
Package: GMF_RESOURCECOST_PUB
Create Resource Cost
API
CREATE_RESOURCE_CO
ST
Creates a new resource cost in the
Resource Cost Details table.
Delete Resource Cost
API
DELETE_RESOURCE_CO
ST
Deletes a resource cost from the
Retrieve Resource Cost
API
GET_RESOURCE_COST Retrieves a resource cost from the
Update Resource Cost
API
UPDATE_RESOURCE_CO
ST
Updates a resource cost in the
The GMF_RESOURCECOST_PUB package defines and uses the following custom
PL/SQL Record Type:
TYPE Resource_Cost_Rec_Type IS RECORD
( resources cm_rsrc_dtl.resources%TYPE,
legal_entity_id cm_rsrc_dtl.legal_entity_id%TYPE ,
organization_id cm_rsrc_dtl.organization_id%TYPE ,
organization_code mtl_parameters.organization_code%TYPE ,
period_id cm_rsrc_dtl.period_id%TYPE ,
calendar_code cm_rsrc_dtl.calendar_code%TYPE ,
period_code cm_rsrc_dtl.period_code%TYPE ,
cost_type_id cm_rsrc_dtl.cost_type_id%TYPE ,
cost_mthd_code cm_rsrc_dtl.cost_mthd_code%TYPE,
usage_uom cm_rsrc_dtl.usage_uom%TYPE,
nominal_cost cm_rsrc_dtl.nominal_cost%TYPE,
delete_mark cm_rsrc_dtl.delete_mark%TYPE := 0,
);

Oracle Process Manufacturing Process Planning APIs 3-1
3
Oracle Process Manufacturing Process
Planning APIs
Oracle Process Manufacturing Process Planning API Packages
The following are the packages containing the OPM Process Planning APIs. Confirm
GMP_RESOURCES_PUB Public level package used for creating,
updating, and deleting generic resources in
OPM.
GMP_RESOURCE_DTL_PUB Public level package used for creating,
updating, and deleting plant resources in
OPM.
GMP_RSRC_AVL_PKG Public level package used for resource
availability calculations.
GMP_CALENDAR_API Public level package used for fetching data
from the OPM Shop Calendar. These APIs are
used by OPM Process Execution.
Oracle Process Manufacturing Process Planning API Package Listings
Listed in this section are the subprograms for each Public Process Planning API
Package.

DESCRIBE. For example, DESCRIBE GMP_RESOURCES_PUB lists all
of the parameter information for all the APIs in the
GMP_RESOURCES_PUB package.
Package: GMP_RESOURCES_PUB
Check Data API CHECK_DATA Validates the resource data.
Delete Resource API DELETE_RESOURCES Deletes an OPM resource.
Insert Resource API INSERT_RESOURCES Creates a generic resource based on
the data entered after validating it.
Update Resource API UPDATE_RESOURCES Updates the generic resource record
with entered values.
The GMP_RESOURCES_PUB package defines and uses the following custom PL/SQL
Record Types and INDEX BY Table of Records Types:
TYPE gmp_resources_tab IS TABLE OF cr_rsrc_mst%ROWTYPE
TYPE gmp_resources_dtl_tab IS TABLE OF cr_rsrc_dtl%ROWTYPE
TYPE update_table_rec_type IS RECORD
(
p_col_to_update VARCHAR2(30)
,p_value VARCHAR2(30)
);
TYPE update_tbl_type IS TABLE OF update_table_rec_type INDEX BY
BINARY_INTEGER;

Package: GMP_RESOURCE_DTL_PUB
Check Data API CHECK_DATA Validates the inserted plant resource
data.
Check Instance Data API CHECK_INSTANCE_DAT
A
Checks the Resource Instance data
before insertion.
Delete Resource API DELETE_RESOURCES Deletes a resource row from the Plant
Resource table.
Insert Detail Rows API INSERT_DETAIL_ROWS Inserts a detail row in the Plant
Resource table.
Insert Resource Detail
API
INSERT_RESOURCES_DT
L
Creates a new plant resource.
Insert Resource Instance
API
INSERT_RESOURCE_INS
TANCE
Inserts a resource instance row in the
Plant Resource Instance table.
Update Detail Rows API UPDATE_DETAIL_ROWS Updates a detail row in the Plant
Resource table.
Update Instances API UPDATE_INSTANCES Updates the instance data in the
Resource Instance table.
Update Instance Row
API
UPDATE_INSTANCE_RO
W
Updates the instance row in the
Resource Instance table.
Update Resource Detail
API
UPDATE_RESOURCE_DT
L
Updates a Plant Resource.
The GMP_RESOURCE_DTL_PUB package defines and uses the following custom
PL/SQL Record Types and INDEX BY Table of Records Types:
(
);
TYPE update_tbl_type IS TABLE OF update_table_rec_type

TYPE resource_instances_rec IS RECORD
(
RESOURCE_ID NUMBER,
INSTANCE_ID NUMBER,
INSTANCE_NUMBER NUMBER,
VENDOR_ID NUMBER,
MODEL_NUMBER VARCHAR2(30),
SERIAL_NUMBER VARCHAR2(30),
TRACKING_NUMBER VARCHAR2(30),
EFF_START_DATE DATE,
EFF_END_DATE DATE,
LAST_MAINTENANCE_DATE DATE,
MAINTENANCE_INTERVAL NUMBER,
INACTIVE_IND NUMBER,
CALIBRATION_FREQUENCY NUMBER,
CALIBRATION_PERIOD VARCHAR2(4),
CALIBRATION_ITEM_ID NUMBER,
LAST_CALIBRATION_DATE DATE,
NEXT_CALIBRATION_DATE DATE,
LAST_CERTIFICATION_DATE DATE,
CERTIFIED_BY VARCHAR2(32),
CREATION_DATE DATE,
CREATED_BY NUMBER,
LAST_UPDATE_DATE DATE,
LAST_UPDATED_BY NUMBER,
LAST_UPDATE_LOGIN NUMBER
) ;
TYPE resource_instances_tbl IS TABLE OF resource_instances_rec
Package: GMP_RSRC_AVL_PKG
Resource Availability
Calculations
RSRC_AVL Returns the available hours for a
resource based on the calendar
specified during the period after
netting out unavailability from the
calendar.
Resource Availability
Calculations
RSRC_AVL Returns the available hours for a
resource based on the organization
calendar specified during the period
after netting out unavailability from
the calendar.
The GMP_RSRC_AVL_PKG package defines and uses the following Variables, custom
PL/SQL Record Types, Records, and INDEX BY Table of Records Types:

gmp_setup BOOLEAN:=FALSE;
gmp_api_version NUMBER;
gmp_user_id NUMBER;
gmp_user_name VARCHAR2(50);
gmp_login_id NUMBER;
gmp_timestamp DATE;
TYPE out_cal_shift_typ is RECORD
( out_resource_count number,
out_cal_date date,
out_shift_num number,
out_cal_from_date date,
out_cal_to_date date
);
out_calendar_record out_cal_shift_typ;
TYPE cal_tab2 is table of out_cal_shift_typ index by BINARY_INTEGER;
out_cal_rec cal_tab2;
out_rec cal_tab2;
Package: GMP_CALENDAR_API
Get All Dates API GET_ALL_DATES Returns the workdays and days not
worked between the specified Start
and End dates in the calendar.
Get Contiguous Periods
API
GET_CONTIGUOUS_PERI
ODS
Retrieves contiguous periods of time
that add up to the required duration.
If the Start date is entered, then the
duration is calculated beginning with
the start date.
Get Workday Details
API
GET_WORKDAY_DETAIL
S
Returns the workday details.
Get Workdays API GET_WORK_DAYS Returns the workdays between the
specified Start and End dates in the
calendar.
Is Working Day API IS_WORKING_DAY Uses Calendar_id and date to
determine if the date entered is a
workday.
Is Working Daytime API IS_WORKING_DAYTIME Uses date and time entered to
determine if they are within or
outside of the calendar workday.

The GMP_CALENDAR_API package defines and uses the following custom PL/SQL
Record Types and INDEX BY Table of Records Types:
TYPE contig_time_rec IS RECORD
(
start_date DATE,
duration NUMBER,
end_date DATE
);
TYPE contig_period_tbl IS TABLE OF contig_time_rec INDEX BY
BINARY_INTEGER;
TYPE date_rec IS RECORD (
cal_date DATE,
is_workday NUMBER );
TYPE date_tbl IS TABLE OF date_rec
TYPE workday_rec IS RECORD(
workday DATE);
TYPE workdays_tbl IS TABLE OF workday_rec
TYPE shopday_dtl_rec IS RECORD (
shift_no NUMBER,
shift_start NUMBER ,
shift_duration NUMBER );
TYPE shopday_dtl_tbl IS TABLE OF shopday_dtl_rec

Oracle Process Manufacturing Quality Management APIs 4-1
4
Oracle Process Manufacturing Quality
Management APIs
Oracle Process Manufacturing (OPM) Quality Management API Packages
The following are packages that contain the OPM Quality Management APIs. Confirm
GMD_SPEC_PUB Public level package used for creating,
modifying, or deleting specifications.
GMD_SPEC_VRS_PUB Public level specification validity rules
package supplying APIs to create or delete
specifications and associated specification
validity rules.
GMD_QC_TESTS_PUB Public level QC Tests package containing
validation procedures and functions for
verifying test and results data.
GMD_SAMPLES_PUB Public level samples package supplying APIs
to create or delete samples and associated
entities.
GMD_RESULTS_PUB Public level results package supplying APIs to
record results and add tests to a sample.

GMD_OUTBOUND_APIS_PUB Public level QM package containing APIs to
export information to third party products.
Quality Management API Package Listings
Listed in this section are the subprograms for each Public Quality Management API
Package. To list the parameters of an API, use the SQL*Plus command DESCRIBE. For
example, DESCRIBE GMD_SPEC_PUB lists all of the parameter information for all the
APIs in the GMD_SPEC_PUB package.
parameters (previously called PL/SQL Tables) refer to the Oracle Applications Electronic
Technical Reference Manual (eTRM).
Package: GMD_SPEC_PUB
Create Specification CREATE_SPEC Inserts a specification into the
GMD_SPECIFICATIONS table.
Inserts one or more specification tests
into the GMD_SPEC_TESTS table.
Delete Specification DELETE_SPEC Deletes a row in the
GMD_SPECIFICATIONS table.
Delete Specification Tests DELETE_SPEC_TESTS Deletes a row in the
GMD_SPEC_TESTS table.
The GMD_SPEC_PUB package defines and uses the following INDEX BY Table of
Records Types:
TYPE SPEC_TESTS_TBL IS TABLE OF GMD_SPEC_TESTS%ROWTYPE
TYPE INVENTORY_SPEC_VRS_TBL IS TABLE OF GMD_INVENTORY_SPEC_VRS%ROWTYPE

Package: GMD_SPEC_VRS_PUB
Create Inventory Specification
Validity Rules
CREATE_INVENTORY_SPE
C_VRS
Inserts one or more rows into
the
GMD_INVENTORY_SPEC_V
RS table.
Create WIP Specification
Validity Rules
CREATE_WIP_SPEC_VRS Inserts one or more rows into
the GMD_WIP_SPEC_VRS
table.
Create Customer Specification
Validity Rules
CREATE_CUSTOMER_SPEC
_VRS
the
GMD_CUSTOMER_SPEC_V
RS table.
Create Supplier Specification
Validity Rules
CREATE_SUPPLIER_SPEC_V
RS
the
GMD_SUPPLIER_SPEC_VRS
table.
Create Monitoring
Specification Validity Rules
CREATE_MONITORING_SP
EC_VRS
Inserts a row into the
GMD_MONITORING_SPEC_
VRS table.
Create Inventory Specification
Validity Rules
DELETE_INVENTORY_SPEC
_VRS
Deletes one or more rows in
the
RS table.
Create WIP Specification
Validity Rules
DELETE_WIP_SPEC_VRS Deletes one or more rows in
the GMD_WIP_SPEC_VRS
table.
Create Customer Specification
Validity Rules
DELETE_CUSTOMER_SPEC_
VRS
the
GMD_CUSTOMER_SPEC_V
RS table.
Create Supplier Specification
Validity Rules
DELETE_SUPPLIER_SPEC_V
RS
the
table.

Create Monitoring
Specification Validity Rules
DELETE_MONITORING_SP
EC_VRS
the
GMD_MONITORING_SPEC_
VRS table.
The GMD_SPEC_VRS_PUB package defines and uses the following INDEX BY Table of
Records Types:
TYPE INVENTORY_SPEC_VRS_TBL IS TABLE OF GMD_INVENTORY_SPEC_VRS%ROWTYPE
TYPE WIP_SPEC_VRS_TBL IS TABLE OF GMD_WIP_SPEC_VRS%ROWTYPE
TYPE CUSTOMER_SPEC_VRS_TBL IS TABLE OF GMD_CUSTOMER_SPEC_VRS%ROWTYPE
TYPE SUPPLIER_SPEC_VRS_TBL IS TABLE OF GMD_SUPPLIER_SPEC_VRS%ROWTYPE
TYPE MONITORING_SPEC_VRS_TBL IS TABLE OF GMD_MONITORING_SPEC_VRS%ROWTYPE
Package: GMD_QC_TESTS_PUB
Create Tests CREATE_TESTS Creates a new test, new test
values, or new customer tests.
Delete Test Headers DELETE_TEST_HEADERS Logically deletes the entity
test header from the
GMD_QC_TESTS table by
setting the DELETE_MARK
column to 1.
Delete Test Values DELETE_TEST_VALUES Deletes one or more rows in
the GMD_QC_TEST_VALUES
table.
Delete Customer Tests DELETE_CUSTOMER_TESTS Deletes one or more rows in
the
GMD_CUSTOMER_TESTS
table.

The GMD_QC_TESTS_PUB package defines and uses the following INDEX BY Table of
Records Types:
TYPE QC_TEST_VALUES_TBL IS TABLE OF GMD_QC_TEST_VALUES%ROWTYPE
TYPE QC_CUST_TESTS_TBL IS TABLE OF GMD_CUSTOMER_TESTS%ROWTYPE
Package: GMD_SAMPLES_PUB
Create Samples CREATE_SAMPLES Inserts master-detail rows
into the GMD_SAMPLES,
GMD_SAMPLING_EVENT,
GMD_SAMPLE_SPEC_DISP,
GMD_EVENT_SPEC_DISP,G
MD_RESULTS, and
GMD_SPEC RESULTS tables.
Find Matching Specification FIND_MATCHING_SPEC This program for validation
purposes. It is not intended
for standalone use.
Delete Samples DELETE_SAMPLES This procedure lets you
logically delete one or more
rows in the GMD_SAMPLES
table by setting the
DELETE_MARK column to 1.
Validate Item Controls VALIDATE_ITEM_CONTRO
LS
This program for validation
for standalone use.
Validate Inventory Sample VALIDATE_INV_SAMPLE This program for validation
for standalone use.
Validate Customer Sample VALIDATE_CUST_SAMPLE This program for validation
for standalone use.
Validate WIP Sample VALIDATE_WIP_SAMPLE This program for validation
for standalone use.

Validate Sample VALIDATE_SAMPLE This program for validation
for standalone use.
Validate Location Sample VALIDATE_LOCATION_SA
MPLE
for standalone use.
Validate Resource Sample VALIDATE_RESOURCE_SA
MPLE
for standalone use.
Validate Stability Sample VALIDATE_STABILITY_SA
MPLE
for standalone use.
Package: GMD_RESULTS_PUB
Validate Input VALIDATE_INPUT This program for validation
for standalone use.
Get Result Information GET_RESULT_INFORMATIO
N
for standalone use.
Record Results RECORD_RESULTS Modifies a row in
GMD_RESULTS. Analyzes
input to determine if Result is
considered in specification or
out of specification and
updates the IN_SPEC_IND
column of the
GMD_SPEC_RESULTS table
accordingly.

Add Tests to Sample ADD_TESTS_TO_SAMPLE Adds tests to an existing
sample. Creates rows in the
GMD_RESULTS and
GMD_SPEC_RESULTS tables.
The GMD_RESULTS_PUB package defines and uses the following custom Record Type:
TYPE RESULTS_REC IS RECORD
( UPDATE_INSTANCE_ID GMD_RESULTS.UPDATE_INSTANCE_ID%TYPE,
RESULT_ID GMD_RESULTS.RESULT_ID%TYPE,
SAMPLE_ID GMD_RESULTS.SAMPLE_ID%TYPE,
SAMPLE_NO GMD_SAMPLES.SAMPLE_NO%TYPE,
ORGANIZATION_ID GMD_SAMPLES.ORGANIZATION_ID%TYPE,
LAB_ORGANIZATION_ID GMD_RESULTS.LAB_ORGANIZATION_ID%TYPE,
TEST_CODE GMD_QC_TESTS.TEST_CODE%TYPE,
TEST_ID GMD_RESULTS.TEST_ID%TYPE,
TEST_REPLICATE_CNT GMD_RESULTS.TEST_REPLICATE_CNT%TYPE,
RESULT_VALUE VARCHAR2(80),
RESULT_DATE GMD_RESULTS.RESULT_DATE%TYPE,
TEST_KIT_INV_ITEM_ID GMD_RESULTS.TEST_KIT_INV_ITEM_ID%TYPE,
TEST_KIT_LOT_NUMBER GMD_RESULTS.TEST_KIT_LOT_NUMBER%TYPE,
TESTER GMD_RESULTS.TESTER%TYPE,
TESTER_ID GMD_RESULTS.TESTER_ID%TYPE,
TEST_PROVIDER_CODE GMD_RESULTS.TEST_PROVIDER_CODE%TYPE,
TEST_PROVIDER_ID GMD_RESULTS.TEST_PROVIDER_ID%TYPE,
SEQ GMD_RESULTS.SEQ%TYPE,
IN_SPEC GMD_SPEC_RESULTS.IN_SPEC_IND%TYPE,
ASSAY_RETEST GMD_RESULTS.ASSAY_RETEST%TYPE,
EVAL_IND GMD_SPEC_RESULTS.EVALUATION_IND%TYPE,
ACTION_CODE GMD_SPEC_RESULTS.ACTION_CODE%TYPE,
AD_HOC_PRINT_ON_COA_IND GMD_RESULTS.AD_HOC_PRINT_ON_COA_IND%TYPE,
PLANNED_RESOURCE GMD_RESULTS.PLANNED_RESOURCE%TYPE,
PLANNED_RESOURCE_INSTANCE GMD_RESULTS.PLANNED_RESOURCE_INSTANCE%TYPE,
ACTUAL_RESOURCE GMD_RESULTS.ACTUAL_RESOURCE%TYPE,
ACTUAL_RESOURCE_INSTANCE GMD_RESULTS.ACTUAL_RESOURCE_INSTANCE%TYPE,
PLANNED_RESULT_DATE GMD_RESULTS.PLANNED_RESULT_DATE%TYPE,
TEST_BY_DATE GMD_RESULTS.TEST_BY_DATE%TYPE,
TEST_QTY GMD_RESULTS.TEST_QTY%TYPE,
TEST_QTY_UOM GMD_RESULTS.TEST_QTY_UOM%TYPE,
RESERVE_SAMPLE_ID GMD_RESULTS.RESERVE_SAMPLE_ID%TYPE,
CONSUMED_QTY GMD_RESULTS.CONSUMED_QTY%TYPE
);
Package: GMD_OUTBOUND_APIS_PUB
Fetch Results FETCH_RESULTS Retrieves sample groups from
the GMD_RESULTS table.

Fetch Composite Results FETCH_COMPOSITE_RESUL
TS
Retrieves composite results
from the
GMD_COMPOSITE_RESULT
S,
GMD_COMPOSITE_SPEC_D
ISP, and
GMD_COMPOSITE_RESULT
_ASSOC tables.
Fetch Samples FETCH_SAMPLES Retrieves sample groups from
the GMD_SAMPLES and
GMD_SAMPLE_SPEC_DISP
tables.
Fetch Test Methods FETCH_TEST_METHODS Retrieves test method data
from the
GMD_TEST_METHODS
table.
Fetch Tests FETCH_TESTS Retrieves tests from the
GMD_TEST_QC_TESTS,
GMD_QC_TEST_VALUES,
and
GMD_CUSTOMER_TESTS
tables.
Fetch Specification Validity
Rules
FETCH_SPEC_VRS Retrieves specifications,
specification tests, and
validity rules from the
GMD_SPECIFICATIONS,
GMD_SPEC_TESTS,
GMD_WIP_SPEC_VRS,
GMD_CUSTOMER_SPEC_V
RS,
RS, and
tables.

Oracle E-Records APIs 5-1
5
Oracle E-Records APIs
Oracle E-Records API Packages
The following are the packages containing the Oracle E-Records APIs. Confirm that
these packages are loaded in your instance so that the interfacing subprograms can
EDR_ERES_EVENT_PUB Public level APIs to raise an e-signature
event or related events in deferred mode.
EDR_EVENT_RELATIONSHIP_PUB Public level APIs establish relationship
between e-record events.
EDR_EVIDENCESTORE_PUB Public level APIs for the Evidence Store;
retrieves the e-record details.
EDR_TRANS_ACKN_PUB Public level API used to send appropriate
acknowledgement to the evidence store for
an e-record based on the status of the
business transaction.
EDR_STANDARD_PUB Public level API that contains all general
Oracle E-Records utilities.
EDR_FILES_PUB Public level API that provides a generic file
upload management system for uploading
files into the Oracle E-Business Suite.

Oracle E-Records API Package Listings
Listed in this section are the subprograms for each Public Oracle E-Records API
Package. To list the parameters of an API, use the SQL*Plus command DESCRIBE. For
example, DESCRIBE EDR_EVENT_RELATIONSHIP_PUB lists the entire contents of
the EDR_EVENT_RELATIONSHIP_PUB package specification
Package: EDR_ERES_EVENT_PUB
Get e-record ID GET_ERECORD_ID Obtains the e-record ID for an event
name and event key combination from a
table of ERES events.
Get event details GET_EVENT_DETAILS Obtains the event name and event key
from the evidence store for an e-record
ID.
Raise e-signature
events
RAISE_ERES_EVENT Raises normal as well as related events.
Raise related
e-signature events
RAISE_INTER_EVENT Raises a number of e-signature related
events at one time.
Validate e-record VALIDATE_ERECORD Determines if the e-record with a specific
ID exists in the evidence store. The
return value indicates the result.
Validate Payload VALIDATE_PAYLOAD Determines if the payload of parameters
being passed to raise an ERES event is
valid.
Validate Payload
Forms
VALIDATE_PAYLOAD_FO
RMS
Determines if the payload of parameters
being passed to raise an ERES event is
valid. This API is used from forms.
The EDR_ERES_EVENT_PUB package defines and uses the following Custom Record
Types and INDEX BY Table of Records Types:

TYPE ERECORD_ID_TBL_TYPE IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
TYPE ERES_EVENT_REC_TYPE IS RECORD
( EVENT_NAME VARCHAR2(80)
,
EVENT_KEY VARCHAR2(240)
,
ERECORD_ID NUMBER
,
EVENT_STATUS VARCHAR2(20) DEFAULT NULL
,
EVENT_XML CLOB DEFAULT NULL
,
PARAM_NAME_1 VARCHAR2(30) DEFAULT NULL
,
PARAM_VALUE_1 VARCHAR2(2000) DEFAULT NULL
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,

,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
);
TYPE ERES_EVENT_TBL_TYPE IS TABLE OF ERES_EVENT_REC_TYPE INDEX BY
BINARY_INTEGER;
Package: EDR_EVENT_RELATIONSHIP_PUB
Establish relationships
between e-records
CREATE_RELATIONSHIP Creates a row in the
EDR_EVENT_RELATIONSHIP
table. Establishes a related event
relationship between two events
in evidence store.
Validate Relationship VALIDATE_RELATIONSHIP Creates a row in the
EDR_EVENT_RELATIONSHIP
table. Validates if a parent-child
relationship can be created
between the specified parent and
child events.
The EDR_EVENT_RELATIONSHIP_PUB package defines and uses the following

Custom Record Types and INDEX BY Table of Records Types:
Type INTER_EVENT_REC_TYPE IS RECORD
( parent_event_name VARCHAR2(80) ,
parent_event_key VARCHAR2(240) ,
parent_erecord_id NUMBER ,
child_event_name VARCHAR2(80) ,
child_event_key VARCHAR2(240) ,
child_erecord_id NUMBER
);
TYPE INTER_EVENT_TBL_TYPE IS TABLE OF INTER_EVENT_REC_TYPE INDEX BY
BINARY_INTEGER;
Package: EDR_EVIDENCESTORE_PUB
Open document OPEN_DOCUMENT Opens a document for
signature and stores the
information. The document
opened using this API
remains active until the
document ID is closed using
another API or the document
is cancelled. The
DOCUMENT_ID returned by
this API is the required key
for calling other relevant
APIs.
Close document CLOSE_DOCUMENT Closes an open document
after the relevant information
is posted. The closed
document cannot be
modified further.
Update document UPDATE_DOCUMENT Updates a document for
signature and stores the
information.
Change document
status
CHANGE_DOCUMENTSTATUS Changes the document status
to the status passed as a
parameter. There is no
validation performed on the
status value.

Post document
parameters
POST_DOCUMENTPARAMETERS Associates any name-value
pair attributes to the
document.
Retrieve signature
details
GET_SIGNATUREDETAILS Returns signature details
such as signature timestamp
and signature parameters
involving signature
comments etc.
Retrieve e-record
details
GET_DOCUMENTDETAILS Returns e-record details such
as e-record XML, parameters
associated with e-records and
approver information based
on e-record ID input.
Request Signature REQUEST_SIGNATURE Requests a signature for a
document. It creates a new
signature row in the
signature table for the
document and user.
Capture Signature CAPTURE_SIGNATURE Captures the signature for a
single event and generates
the corresponding document
ID and signature ID.
Post signature POST_SIGNATURE Posts signature details for a
specific document.
Post signature
parameters
POST_SIGNATUREPARAMETERS Associates any name-value
pair attributes to the specified
signature.
Cancel document CANCEL_DOCUMENT Updates the document status
to CANCEL. All rows from
relevant tables are deleted for
a given document ID. This
API cannot be called after the
document is closed.
The EDR_EVIDENCESTORE_PUB package defines and uses the following INDEX BY
Table of Records Types:

TYPE Params_tbl_type IS TABLE of edr_psig.params_rec INDEX by
Binary_INTEGER;
TYPE Signature_tbl_type IS TABLE of edr_psig.Signature INDEX by
Binary_INTEGER;
Package: EDR_TRANS_ACKN_PUB
E-record
acknowledgement
SEND_ACKN Sends appropriate
acknowledgement for an
e-record based on the status of
the business transaction.
Package: EDR_STANDARD_PUB
Determine if the
e-record is required
IS_EREC_REQUIRED Checks if an e-record is
required for an event.
Determine if the
e-signature is required
IS_ESIG_REQUIRED Checks if a signature is
required for an event.
Get AME rule level
configuration values
GET_AMERULE_VARIABLEVAL
UES
Returns the table of
configuration variables for an
AME Transaction and Rule.
Get AME rule level
configuration values
GET_AMERULE_VARVALUES Returns the table of
configuration variables for an
AME Transaction and Rule.
Get current e-signature
status
GET_PSIGSTATUS Obtains signature status
(Pending, Complete, or Error)
for a given event.
Get query ID on events GET_QUERYID_ONEVENTS Obtains a query ID for a list of
events passed to the API in the
parameter
p_eventQuery_recTbl.
Get erecord ID GET_ERECORD_ID Retrieves the latest e-record ID.

Get Notification
Routing Information
GET_NOTIF_ROUTING_INFO Retrieves the overriding
recipient for a routed
notification in a workflow. The
routing comments are also
returned.
Get query ID on
parameters
GET_QUERYID_ONPARAMS Retrieves a query ID for events
based on arrays of event
parameters (NAME, KEY).
Is audit value old IS_AUDITVALUE_OLD Checks if the audited table
column was modified during a
transaction.
Get Descriptive
Flexfield One Prompt
GET_DESCFLEX_ONEPROMPT Obtains a single descriptive
flexfield prompt for designated
column.
Get Descriptive
Flexfield All Prompts
GET_DESCFLEX_ALLPROMPTS Retrieves the prompts of all the
items in the descriptive
flexfield.
Get Lookup Meaning GET_LOOKUP_MEANING Retrieves the lookup code
meaning using FND_
LOOKUPS view for a specific
lookup type and code.
Display time only DISPLAY_TIME_ONLY Converts an input date value of
type DATE to a corresponding
string display value.
Display date only DISPLAY_DATE_ONLY Converts an input date value of
Display date DISPLAY_DATE Converts an input date value of
The EDR_STANDARD_PUB package defines and uses the following custom Record
Types and INDEX BY Table of Records Types:

Type eventDetails is record(
event_name varchar2(240),
event_key varchar2(240),
key_type varchar2(40)
);
Type eventQuery is table of eventDetails index by binary_integer;
Type RuleInputvalues is record(
input_name varchar2(240),
input_value varchar2(240)
);
Type ameRuleinputvalues is table of ruleInputvalues index by
binary_integer;
Package: EDR_FILES_PUB
File Upload UPLOAD_FILE Uploads a given file into the
iSign repository.

OPM Process Execution APIs 6-1
6
OPM Process Execution APIs
OPM Process Execution API Packages
The following is the package containing the OPM Process Execution. This file contains
the headers for the Process Execution (GME) APIs in Oracle Process Manufacturing
(OPM). Confirm that this package is loaded in your instance so that the interfacing
subprograms can compile successfully.
GME_API_PUB Contains the headers for the Process
Execution APIs.
Process Execution API Package Listings
Listed in this section are the subprograms for the Public Process Execution API Package.
DESCRIBE. For example, DESCIBE GMD_SPEC_PUB lists all of the
parameter information for all the APIs in the GMD_SPEC_PUB
package.

Package: GME_API_PUB
Autodetail Batch AUTO_DETAIL_BATCH Creates detail level
reservations for each
ingredient line in the
production batch using the
picking rules defined.
Auto Detail Line AUTO_DETAIL_LINE Creates detail level
reservations for a specific
ingredient line using the
picking rules defined.
Cancel Batch CANCEL_BATCH Cancels a Firm Planned
Order (FPO) or batch and all
associated phantom batches.
Close Batch CLOSE_BATCH Closes a batch.
Close Step CLOSE_STEP Closes a step.
Complete Batch COMPLETE_BATCH Completes a batch.
Complete Step COMPLETE_STEP Completes a step.
Convert Detail
Reservation
CONVERT_ DTL_RESERVATION Converts detail level
reservation into transaction.
Convert FPO to
Batches
CONVERT_FPO Converts FPO to one or
many batches.
Create Batch CREATE_BATCH Creates a FPO or a batch
and checks inventory
shortages.
Create Batch
Reservations
CREATE_BATCH_RESERVATIONS Creates high level
reservations for all the
ingredients of a given batch.
Create Line
Reservations
CREATE_LINE_RESERVATIONS Creates high level
reservations for the given
ingredient line.

Create Material
Transaction
CREATE_MATERIAL_TXN Creates a material
transaction.
Create Pending
Product Lot
CREATE_PENDING_PRODUCT_ LOT Creates a pending product
lot for a specified product or
byproduct line.
Create Phantom CREATE_PHANTOM Creates a batch and checks
for inventory shortages.
Delete Batch Step
Activity
DELETE_BATCHSTEP_ ACTIVITY Deletes an activity from a
step.
Delete Batch Step
Resource
DELETE_BATCHSTEP_ RESOURCE Deletes a resource of an
activity.
Delete Material Line DELETE_MATERIAL_ LINE Deletes a material line in a
batch.
Delete Material
Transaction
DELETE_MATERIAL_TXN Deletes a material
transaction.
Delete Process
Parameter
DELETE_PROCESS_PARAMETER Deletes a process parameter
for a given resource.
End Complete Actual
Resource Transaction
END_CMPLT_ACTUAL_ RSRC_TXN Ends a completed resource
transaction that was started
using the Start Completed
Resource Transaction API.
Incremental
Backflushing
INCREMENTAL_ BACKFLUSH Incrementally records
production yield as it occurs
and has ingredient
consumption backflushed.
Insert Batch Step
Activity
INSERT_BATCHSTEP_ ACTIVITY Inserts an activity for a step.
Insert Batchstep INSERT_STEP Inserts a new step into a
batch.

Insert Batchstep
Resource
INSERT_BATCHSTEP_RESOURCE Inserts a resource in a
batchstep activity.
Insert Incremental
INSERT_INCR_ACTUAL_ RSRC_TXN Records incremental
resource usage by inserting
a completed resource
transaction.
Insert Material Line INSERT_MATERIAL_ LINE Inserts new material line in
a batch.
Insert Process
Parameter
INSERT_PROCESS_PARAMETER Inserts a process parameter
for a resource.
Insert Timed
INSERT_ TIMED_ACTUAL_
RSRC_TXN
Records incremental
resource usage by inserting
a completed resource
transaction. Usage is
calculated from transaction
dates supplied in the
transaction.
Release Batch RELEASE_BATCH Releases a batch.
Release Step RELEASE_STEP Releases a step.
Reopen Batch REOPEN_BATCH Reopens a batch and all
associated phantom batches
and all steps optionally.
Reopen Step REOPEN_STEP Reopens a step.
Reroute Batch REROUTE_BATCH Reroutes a batch or FPO to a
different recipe with the
same formula.
Reschedule Batch RESCHEDULE_ BATCH Reschedules a batch or FPO
to different date.
Reschedule Step RESCHEDULE_ STEP Reschedules a step.

Revert to WIP Batch REVERT_BATCH Changes the batch back to
WIP. Only a batch with
status of Complete can be
reverted to WIP.
Revert to WIP Steps REVERT_STEP Changes the batch step
status to WIP. Only batch
steps with a status of
complete can be reverted to
WIP.
Save Batch SAVE_BATCH Saves all the transactions of
a batch.
Scale Batch SCALE_BATCH Scales batches up or down,
including phantom batches.
Start Completed
START_CMPLT_ACTUAL_
RSRC_TXN
Starts a completed resource
transaction for a resource.
Terminate Batch TERMINATE_BATCH Terminates a batch. Cancels
all the pending steps,
terminates all the WIP steps.
Theoretical Yield
Batch
THEORETICAL_YIELD_BATCH Calculates theoretical yield
for a batch or FPO, and
updates the quantities for
the product lines.
Unrelease Batch UNRELEASE_BATCH Unreleases a batch.
Unrelease Step UNRELEASE_STEP Unreleases a step.
Update Actual
Resource Usage
UPDATE_ACTUAL_RSRC_USAGE Inserts a completed resource
transaction for a resource.
This procedure replaces all
the completed resource
transactions with the
supplied resource usage.
Update Batchstep
Activity
UPDATE_BATCHSTEP_ACTIVITY Updates an activity for a
step.

Update Batchstep
Resource
UPDATE_BATCHSTEP_RESOURCE Updates a resource in a step
activity.
Update Material Line UPDATE_MATERIAL_LINE Updates the existing
material line in a batch.
Update Material
Transaction
UPDATE_MATERIAL_ TXN Updates a material
transaction.
Update Pending
Product Lot
UPDATE_PENDING_PRODUCT_ LOT Updates a pending product
lot.
Update Process
Parameter
UPDATE_PROCESS_PARAMETER Updates a process
parameter for a resource.
Refer to the Oracle Process Manufacturing Process Execution User's Guide for detailed
information on all batch processes.

OPM Product Development APIs 7-1
7
OPM Product Development APIs
OPM Product Development API Packages
The following are the packages containing the OPM Product Development APIs.
Confirm that these packages are loaded in your instance so that the interfacing
subprograms can compile successfully.
Formula APIs
GMD_FORMULA_PUB Public Formula Header package that a user-
defined function calls. This business API
creates, modifies or deletes formula header
information. It also creates the detail and
effectivity when a formula header is created.
GMD_FORMULA_DETAIL_PUB Public Formula Detail package that the
wrapper or user defined function calls. It
creates, modifies, or deletes a formula detail.
Recipe APIs
GMD_RECIPE_HEADER Creates or modifies the recipe header
information.

GMD_RECIPE_DETAIL Creates or modifies the recipe detail
information.
GMD_RECIPE_FETCH_PUB Retrieves recipe details.
GMD_FETCH_VALIDITY_ RULES Retrieves recipe validity rule details.
GMD_ROUTINGS_PUB Creates, modifies, or deletes the routing step
information.
GMD_ROUTING_STEPS_PUB Creates or modifies routing steps associated to
the routing header.
GMD_OPERATIONS_PUB Creates operation header and detail
information. It also modifies and deletes
operation header information.
GMD_OPERATION_ ACTIVITIES_PUB Creates, modifies, or deletes the operation
detail information.
GMD_OPERATION_ RESOURCES_PUB Creates, modifies, or deletes the operation
resource information.
GMD_ACTIVITIES_PUB Creates, modifies, or deletes activity
information.
GMD_STATUS_PUB Modifies the status for routings, operations,
recipes, and validity rules.
Item Substitution APIs
GMD_SUBSTITUTION_PUB Creates, modifies, and deletes an item
substitution list.

Least Cost Formulation APIs
GMD_LCF_UTIL. This function is called when external cost is
chosen in the Technical Parameters window to
get the cost function.
Item Technical Data APIs
GMD_ITEM_TECHNICAL_DATA_PUB This API has packages that are called for
insertion, updation, deletion and to fetch the
Technical Parameter values for items.
OPM Product Development API Package Listings
Listed in this section are the subprograms for each Public [Product Name] API Package.
DESCRIBE. For example, DESCRIBE GMD_SPEC_PUB lists all of the
parameter information for all the APIs in the GMD_SPEC_PUB
package.
Electronic Technical Reference Manual (eTRM)
Product Development API Package Listings
GMD_FORMULA_PUB
Delete Formula Header DELETE_FORMULAHEADER Deletes formula header
information.

Insert Formula Header INSERT_FORMULA Inserts formula header
information.
Update Formula Header UPDATE_FORMULAHEADER Updates formula
headerinformation.
The GMD_FORMULA_PUB package defines and uses the following INDEX BY table
Types
TYPE formula_update_hdr_tbl_type IS TABLE OF
GMD_FORMULA_COMMON_PUB.formula_update_rec_type
TYPE formula_insert_hdr_tbl_type IS TABLE OF
GMD_FORMULA_COMMON_PUB.formula_insert_rec_type
GMD_FORMULA_DETAIL_PUB
Delete Formula Details DELETE_FORMULADETAIL Deletes formula details.
Insert Formula Details INSERT_FORMULADETAIL Inserts formula details.
Update Formula Details UPDATE_FORMULADETAIL Updates formula details.
The GMD_FORMULA_DETAIL_PUB package defines and uses the following INDEX
BY table Types
TYPE formula_update_dtl_tbl_type IS TABLE OF
GMD_FORMULA_COMMON_PUB.formula_update_rec_type
TYPE formula_insert_dtl_tbl_type IS TABLE OF
GMD_FORMULA_COMMON_PUB.formula_insert_rec_type

GMD_RECIPE_HEADER
Create Recipe Header CREATE_RECIPE_HEADER Inserts recipe header
information.
Update Recipe Header UPDATE_RECIPE_HEADER Updates recipe header
information.
Delete Recipe Header DELETE_RECIPE_HEADER Deletes recipe header
information.
The GMD_RECIPE_HEADER package defines and uses the following custom Record
Types and INDEX BY table Types:
TYPE FLEX IS RECORD (
ATTRIBUTE_CATEGORY VARCHAR2(30),
ATTRIBUTE1 VARCHAR2(240),
ATTRIBUTE30 VARCHAR2(240)
);

TYPE UPDATE_FLEX IS RECORD (
ATTRIBUTE_CATEGORY VARCHAR2(30) ,
ATTRIBUTE1 VARCHAR2(240) ,
);

TYPE RECIPE_HDR IS RECORD (
RECIPE_ID NUMBER(15)
,RECIPE_DESCRIPTION VARCHAR2(70)
,RECIPE_NO VARCHAR2(32)
,RECIPE_VERSION NUMBER(5)
,USER_ID FND_USER.user_id%TYPE
,USER_NAME FND_USER.user_name%TYPE
,OWNER_ORGN_CODE VARCHAR2(4)
,CREATION_ORGN_CODE VARCHAR2(4)
,OWNER_ORGANIZATION_ID NUMBER
,CREATION_ORGANIZATION_ID NUMBER
,FORMULA_ID FM_FORM_MST.formula_id%TYPE
,FORMULA_NO FM_FORM_MST.formula_no%TYPE
,FORMULA_VERS FM_FORM_MST.formula_vers%TYPE
,ROUTING_ID NUMBER
,ROUTING_NO FM_ROUT_HDR.routing_no%TYPE
,ROUTING_VERS FM_ROUT_HDR.routing_vers%TYPE
,PROJECT_ID NUMBER(15)
,RECIPE_STATUS VARCHAR2(30) := '100'
,PLANNED_PROCESS_LOSS NUMBER := 0
,TEXT_CODE NUMBER(10)
,DELETE_MARK NUMBER(5) := 0
,CONTIGUOUS_IND NUMBER
,ENHANCED_PI_IND VARCHAR2(1)
,RECIPE_TYPE NUMBER
,CREATION_DATE DATE
,CREATED_BY NUMBER(15)
,LAST_UPDATED_BY NUMBER(15)
,LAST_UPDATE_DATE DATE
,LAST_UPDATE_LOGIN NUMBER(15)
,OWNER_ID NUMBER(15)
,OWNER_LAB_TYPE VARCHAR2(4)
,CALCULATE_STEP_QUANTITY NUMBER(5)
);
TYPE CHARGE_REC IS RECORD (
RoutingStep_id NUMBER,
Max_Capacity NUMBER,
charge INTEGER
);
TYPE PROCESS_LOSS_REC IS RECORD (
qty NUMBER := 0 ,
Recipe_id NUMBER ,
Formula_id NUMBER ,
Routing_id NUMBER
);
TYPE recipe_tbl IS TABLE OF RECIPE_HDR
TYPE recipe_flex IS TABLE OF FLEX
TYPE recipe_update_flex IS TABLE OF UPDATE_FLEX
TYPE charge_tbl IS TABLE OF CHARGE_REC

GMD_RECIPE_DETAIL
Create Recipe Customers CREATE_RECIPE_CUSTOMERS Creates recipe customers.
Create Recipe Material CREATE_RECIPE_MTL Creates an entry in the
Recipe Material table.
Create Recipe Process Loss CREATE_RECIPE_PROCESS_LOS
S
Creates recipe process loss.
Create Recipe Validity Rule CREATE_RECIPE_VR Creates recipe validity
rules.
Recipe Organization
Resources
RECIPE_ORGN_RESOURCES Inserts or updates recipe
organization resources.
Recipe Organization
Operations
RECIPE_ORGN_OPERATIONS Inserts or updates recipe
organization operations.
Recipe Routing Steps RECIPE_ROUTING_STEPS Inserts or updates recipe
routing steps.
Update Recipe Customers UPDATE_RECIPE_CUSTOMERS Updates recipe customers.
Update Recipe Process Loss UPDATE_RECIPE_PROCESS_LO
SS
Updates recipe process
Loss.
Update Recipe Validity Rule UPDATE_RECIPE_VR Updates the Recipe
Validity Rules table.
The GMD_RECIPE_DETAIL package defines and uses the following custom Record
Types and INDEX BY table Types:

TYPE FLEX IS RECORD (
ATTRIBUTE_CATEGORY VARCHAR2(30),
ATTRIBUTE1 VARCHAR2(240) DEFAULT NULL,
);

TYPE UPDATE_FLEX IS RECORD (
ATTRIBUTE_CATEGORY VARCHAR2(30) ,
);

TYPE RECIPE_DTL IS RECORD (
RECIPE_ID NUMBER ,
RECIPE_NO VARCHAR2(32) ,
RECIPE_VERSION NUMBER ,
USER_ID FND_USER.USER_ID%TYPE ,
USER_NAME FND_USER.USER_NAME%TYPE ,
ORGN_CODE VARCHAR2(4) ,
ORGANIZATION_ID NUMBER,
SITE_ID NUMBER,
ORG_ID NUMBER,
RECIPE_PROCESS_LOSS_ID NUMBER ,
PROCESS_LOSS NUMBER ,
ACTIVITY_FACTOR NUMBER ,
MAX_CAPACITY NUMBER ,
MIN_CAPACITY NUMBER ,
PROCESS_PARAMETER_1 VARCHAR2(16) ,
CUSTOMER_ID NUMBER ,
CUSTOMER_NO VARCHAR2(32) ,
ROUTINGSTEP_ID NUMBER ,
OPRN_LINE_ID NUMBER ,
RESOURCES VARCHAR2(16) ,
PROCESS_UM VARCHAR2(25) ,
USAGE_UOM
gmd_recipe_orgn_resources.USAGE_UOM%TYPE ,
RESOURCE_USAGE
gmd_recipe_orgn_resources.RESOURCE_USAGE%TYPE,
PROCESS_QTY
gmd_recipe_orgn_resources.PROCESS_QTY%TYPE ,
STEP_QTY gmd_recipe_routing_steps.STEP_QTY%TYPE,
MASS_QTY gmd_recipe_routing_steps.MASS_QTY%TYPE,
MASS_REF_UOM
gmd_recipe_routing_steps.MASS_REF_UOM%TYPE,
VOLUME_QTY
gmd_recipe_routing_steps.VOLUME_QTY%TYPE,
VOLUME_REF_UOM
gmd_recipe_routing_steps.VOLUME_REF_UOM%TYPE,
MASS_STD_UOM
gmd_recipe_routing_steps.MASS_STD_UOM%TYPE,
VOLUME_STD_UOM
gmd_recipe_routing_steps.VOLUME_STD_UOM%TYPE,
TEXT_CODE NUMBER ,
DELETE_MARK NUMBER ,
CONTIGUOUS_IND NUMBER ,
CREATION_DATE DATE ,
CREATED_BY NUMBER ,
LAST_UPDATED_BY NUMBER ,
LAST_UPDATE_DATE DATE ,
LAST_UPDATE_LOGIN NUMBER ,
ITEM_ID NUMBER ,
OWNER_ID NUMBER
);
TYPE RECIPE_VR IS RECORD (
RECIPE_VALIDITY_RULE_ID NUMBER
,RECIPE_ID NUMBER
,RECIPE_NO VARCHAR2(32)
,RECIPE_VERSION NUMBER

,USER_ID FND_USER.USER_ID%TYPE
,USER_NAME FND_USER.USER_NAME%TYPE
,ORGN_CODE VARCHAR2(4)
,INVENTORY_ITEM_ID NUMBER
,REVISION VARCHAR2(3)
,ITEM_NO VARCHAR2(40)
,RECIPE_USE VARCHAR2(30)
,PREFERENCE NUMBER
,START_DATE DATE
,END_DATE DATE
,MIN_QTY NUMBER
,MAX_QTY NUMBER
,STD_QTY NUMBER
,DETAIL_UOM VARCHAR2(25)
,INV_MIN_QTY NUMBER
,INV_MAX_QTY NUMBER
,TEXT_CODE NUMBER
,CREATED_BY NUMBER
,CREATION_DATE DATE
,LAST_UPDATED_BY NUMBER
,LAST_UPDATE_DATE DATE
,LAST_UPDATE_LOGIN NUMBER
,DELETE_MARK NUMBER := 0
,PLANNED_PROCESS_LOSS NUMBER
,VALIDITY_RULE_STATUS VARCHAR2(30)
,ORGANIZATION_ID NUMBER );
TYPE RECIPE_MATERIAL IS RECORD (
RECIPE_ID NUMBER ,
RECIPE_NO VARCHAR2(32) ,
RECIPE_VERSION NUMBER ,
USER_ID FND_USER.USER_ID%TYPE ,
USER_NAME FND_USER.USER_NAME%TYPE ,
FORMULALINE_ID NUMBER ,
TEXT_CODE NUMBER ,
CREATION_DATE DATE ,
CREATED_BY NUMBER ,
LAST_UPDATED_BY NUMBER ,
LAST_UPDATE_DATE DATE ,
LAST_UPDATE_LOGIN NUMBER ,
ROUTINGSTEP_ID NUMBER
);
TYPE recipe_detail_tbl IS TABLE OF RECIPE_DTL
TYPE recipe_flex IS TABLE OF FLEX
TYPE recipe_update_flex IS TABLE OF UPDATE_FLEX
TYPE recipe_vr_tbl IS TABLE OF RECIPE_VR
TYPE recipe_mtl_tbl IS TABLE OF RECIPE_MATERIAL

GMD_ROUTINGS_PUB
Undelete Routing UNDELETE_ROUTING Undeletes a deleted
routing after validation to
ensure that the deleted
routing exists in the
database.
Delete Routing DELETE_ROUTING Deletes routings to prevent
further updates to routing.
Insert Routing INSERT_ROUTING Inserts new routings
Update Routing UPDATE_ROUTING Updates routings.
The GMD_ROUTINGS_PUB package defines and uses the following custom PL/SQL
Record Types and INDEX BY table Types
TYPE gmd_routings_step_tab IS TABLE OF fm_rout_dtl%ROWTYPE
TYPE gmd_routings_step_dep_tab IS TABLE OF fm_rout_dep%ROWTYPE
(
);
BINARY_INTEGER;
GMD_ROUTING_STEPS_PUB
Delete Routing Steps
procedure
DELETE_ROUTING_STEP Deletes routing steps in
the Routing Details table.
Delete Step Dependency
procedure
DELETE_STEP_DEPENDENCIES Deletes routing step
dependencies in the Step
Dependency table.

Insert Routing Steps
procedure
INSERT_ROUTING_STEPS Inserts routing steps in the
Routing Details table.
Insert Step Dependency
procedure
INSERT_STEP_DEPENDENCIES Inserts step dependencies
in the Step Dependency
table.
Update Routing Steps
procedure
UPDATE_ROUTING_STEPS Updates routing steps in
the Routing Details table.
Update Step Dependency
procedure
UPDATE_STEP_DEPENDENCIES Updates step
dependencies in the Step
Dependency table.
GMD_OPERATIONS_PUB
Delete Operation DELETE_OPERATION Deletes an operation in
the Operations table.
Insert Operation INSERT_OPERATION Inserts a new operation.
Update Operation UPDATE_OPERATION Updates an operation in
the Operations table.
The GMD_OPERATIONS_PUB package defines and uses the following custom PL/SQL
TYPE gmd_oprn_activities_tbl_type IS TABLE OF
gmd_operation_activities%ROWTYPE
(
, p_value VARCHAR2(30)
);
BINARY_INTEGER;

GMD_OPERATION_RESOURCES_PUB
Create Operation Resources INSERT_OPERATION_RESOURCE
S
Inserts a new operation
resource.
Modify Operation Resources UPDATE_OPERATION_RESOURC
ES
Updates an operation
resource.
Delete Operation Resources DELETE_OPERATION_RESOURC
ES
Deletes an operation
resource.
The GMD_OPERATION_RESOURCES_PUB package defines and uses the following

TYPE resources_rec_type IS RECORD
(
OPRN_LINE_ID
gmd_operation_resources.oprn_line_id%TYPE
,RESOURCES gmd_operation_resources.resources%TYPE
,RESOURCE_USAGE
gmd_operation_resources.resource_usage%TYPE
,RESOURCE_COUNT
gmd_operation_resources.resource_count%TYPE DEFAULT 1
,RESOURCE_USAGE_UOM
gmd_operation_resources.usage_um%TYPE
,PROCESS_QTY
gmd_operation_resources.process_qty%TYPE
,RESOURCE_PROCESS_UOM
gmd_operation_resources.process_uom%TYPE
,PRIM_RSRC_IND
gmd_operation_resources.prim_rsrc_ind%TYPE
,SCALE_TYPE
gmd_operation_resources.scale_type%TYPE DEFAULT 1
,COST_ANALYSIS_CODE
gmd_operation_resources.cost_analysis_code%TYPE
,COST_CMPNTCLS_ID
gmd_operation_resources.cost_cmpntcls_id%TYPE
,OFFSET_INTERVAL
gmd_operation_resources.offset_interval%TYPE DEFAULT 0
,MIN_CAPACITY
gmd_operation_resources.min_capacity%TYPE
,MAX_CAPACITY
gmd_operation_resources.max_capacity%TYPE
,RESOURCE_CAPACITY_UOM
gmd_operation_resources.capacity_uom%TYPE
,ATTRIBUTE_CATEGORY
gmd_operation_resources.attribute_category%TYPE
,ATTRIBUTE1
gmd_operation_resources.attribute1%TYPE
,ATTRIBUTE2
,ATTRIBUTE3
,ATTRIBUTE4
,ATTRIBUTE5
,ATTRIBUTE6
,ATTRIBUTE7
,ATTRIBUTE8
,ATTRIBUTE9
,ATTRIBUTE10
,ATTRIBUTE11
,ATTRIBUTE12
,ATTRIBUTE13
,ATTRIBUTE14

,ATTRIBUTE15
,ATTRIBUTE16
,ATTRIBUTE17
,ATTRIBUTE18
,ATTRIBUTE19
,ATTRIBUTE20
,ATTRIBUTE21
,ATTRIBUTE22
,ATTRIBUTE23
,ATTRIBUTE24
,ATTRIBUTE25
,ATTRIBUTE26
,ATTRIBUTE27
,ATTRIBUTE28
,ATTRIBUTE29
,ATTRIBUTE30
,PROCESS_PARAMETER_1
gmd_operation_resources.process_parameter_1%TYPE
,ACTIVITY
gmd_operation_activities.activity%TYPE
);
TYPE gmd_oprn_resources_tbl_type IS TABLE OF resources_rec_type INDEX BY
BINARY_INTEGER;
(
);
BINARY_INTEGER;

GMD_ACTIVITIES_PUB
Insert Operation Activity INSERT_OPERATION_ACTIVITY Inserts a new operation
activity.
Update Operation Activity UPDATE_OPERATION_ACTIVITY Updates an operation
activity.
Delete Operation Activity DELETE_OPERATION_ACTIVITY Deletes an operation
activity.
The GMD_ACTIVITIES_PUB package defines and uses the following custom PL/SQL
TYPE activities_rec_type IS RECORD
(
ACTIVITY gmd_activities.activity%type
,COST_ANALYSIS_CODE gmd_activities.cost_analysis_code%type
,DELETE_MARK gmd_activities.delete_mark%type
DEFAULT 0
,TEXT_CODE gmd_activities.text_code%type
,TRANS_CNT gmd_activities.trans_cnt%type
,ACTIVITY_DESC gmd_activities.activity_desc%type
);
TYPE gmd_activities_tbl_type IS TABLE OF activities_rec_type INDEX BY
BINARY_INTEGER;
(
);
BINARY_INTEGER;
GMD_STATUS_PUB
Change Status MODIFY_STATUS Modifies the entity
status.

GMD_SUBSTITUTION_PUB
Creating an Item
Substitution List
Create_substitution Creates a substitution
header, detail, and
formula association.
Creating a Formula
Association to the Item
Substitution List
Create_formula_association Creates a formula
association.
Updating a Substitution List
Header
Update_substitution_header Updates an item
substitution list header.
Updating Substitution List
Details
Update_substitution_detail Updates substitution list
line details.
Deleting a Formula
Association to an Item
Substitution List
Delete_formula_association Deletes a formula
association to an item
substitution list.
The GMD_SUBSTITUTION_PUB package defines and uses the following custom
PL/SQL Record Types and INDEX BY table Types:

(
);
BINARY_INTEGER;
TYPE gmd_substitution_hdr_rec_type IS RECORD
(
SUBSTITUTION_NAME
gmd_item_substitution_hdr_b.substitution_name%TYPE
, SUBSTITUTION_DESCRIPTION
gmd_item_substitution_hdr_tl.substitution_description%TYPE
, SUBSTITUTION_VERSION
gmd_item_substitution_hdr_b.substitution_version%TYPE
, ORIGINAL_INVENTORY_ITEM_ID
gmd_item_substitution_hdr_b.original_inventory_item_id%TYPE
, ORIGINAL_ITEM_NO VARCHAR2(1000)
, ORIGINAL_QTY
gmd_item_substitution_hdr_b.original_qty%TYPE
, PREFERENCE gmd_item_substitution_hdr_b.preference%TYPE
, START_DATE DATE := trunc(SYSDATE)
, END_DATE DATE
, OWNER_ORGANIZATION_ID
gmd_item_substitution_hdr_b.owner_organization_id%TYPE
, REPLACEMENT_UOM_TYPE
gmd_item_substitution_hdr_b.replacement_uom_type%TYPE
, ATTRIBUTE_CATEGORY
gmd_item_substitution_hdr_b.attribute_category%TYPE
, ATTRIBUTE1 gmd_item_substitution_hdr_b.attribute1%TYPE
, ATTRIBUTE10
gmd_item_substitution_hdr_b.attribute10%TYPE
, ATTRIBUTE11
, ATTRIBUTE12
, ATTRIBUTE13
, ATTRIBUTE14
, ATTRIBUTE15
, ATTRIBUTE16
, ATTRIBUTE17
, ATTRIBUTE18
, ATTRIBUTE19
, ATTRIBUTE20

, ATTRIBUTE21
, ATTRIBUTE22
, ATTRIBUTE23
, ATTRIBUTE24
, ATTRIBUTE25
, ATTRIBUTE26
, ATTRIBUTE27
, ATTRIBUTE28
, ATTRIBUTE29
, ATTRIBUTE30
, CREATION_DATE
gmd_item_substitution_hdr_b.creation_date%TYPE
, CREATED_BY gmd_item_substitution_hdr_b.created_by%TYPE
, LAST_UPDATE_DATE
gmd_item_substitution_hdr_b.last_update_date%TYPE
, LAST_UPDATED_BY
gmd_item_substitution_hdr_b.last_updated_by%TYPE
, LAST_UPDATE_LOGIN
gmd_item_substitution_hdr_b.last_update_login%TYPE
);
TYPE gmd_substitution_dtl_rec_type IS RECORD
(
INVENTORY_ITEM_ID
gmd_item_substitution_dtl.inventory_item_id%TYPE
, ITEM_NO VARCHAR2(1000)
, UNIT_QTY gmd_item_substitution_dtl.unit_qty%TYPE
, DETAIL_UOM gmd_item_substitution_dtl.detail_uom%TYPE
, CREATION_DATE
gmd_item_substitution_dtl.creation_date%TYPE
, CREATED_BY gmd_item_substitution_dtl.created_by%TYPE
, LAST_UPDATE_DATE
gmd_item_substitution_dtl.last_update_date%TYPE
, LAST_UPDATED_BY
gmd_item_substitution_dtl.last_updated_by%TYPE
, LAST_UPDATE_LOGIN
gmd_item_substitution_dtl.last_update_login%TYPE
);
TYPE gmd_fmsubstitution_rec_type IS RECORD
(
FORMULA_ID gmd_formula_substitution.formula_id%TYPE
, FORMULA_NO fm_form_mst_b.formula_no%TYPE
, FORMULA_VERS fm_form_mst_b.formula_vers%TYPE
, CREATION_DATE gmd_formula_substitution.creation_date%TYPE
, CREATED_BY gmd_formula_substitution.created_by%TYPE
, LAST_UPDATE_DATE
gmd_formula_substitution.last_update_date%TYPE
, LAST_UPDATED_BY
gmd_formula_substitution.last_updated_by%TYPE

, LAST_UPDATE_LOGIN
gmd_formula_substitution.last_update_login%TYPE
);
TYPE gmd_formula_substitution_tab IS TABLE OF
gmd_fmsubstitution_rec_type
GMD_ITEM_TECHNICAL_DATA_PUB
Insert item technical data INSERT_ITEM_TECHNICAL_DAT
A
Inserts the item technical
data.
Update item technical data UPDATE_ITEM_TECHNICAL_DAT
A
Updates the item
technical data.
Delete item technical data DELETE_ITEM_TECHNICAL_DAT
A
Deletes item technical
data.
Fetch item technical data FETCH_ITEM_TECHNICAL_DATA Gets item technical data.
The GMD_ITEM_TECHNICAL_DATA_PUB package defines and uses the following
TYPE technical_data_hdr_rec IS RECORD
(Tech_Data_Id gmd_technical_data_hdr.Tech_Data_Id%TYPE,
Organization_Id gmd_technical_data_hdr.Organization_Id%TYPE,
Inventory_Item_Id gmd_technical_data_hdr.Inventory_Item_Id%TYPE,
Lot_Number gmd_technical_data_hdr.lot_number%TYPE,
Lot_Organization_Id gmd_technical_data_hdr.Lot_Organization_Id%TYPE,
Formula_Id gmd_technical_data_hdr.Formula_Id%TYPE,
Batch_Id gmd_technical_data_hdr.Batch_Id%TYPE,
Text_Code gmd_technical_data_hdr.Text_Code%TYPE );
TYPE technical_data_dtl_rec IS RECORD
(Tech_Parm_Id gmd_technical_data_dtl.Tech_Parm_Id%TYPE,
Sort_Seq gmd_technical_data_dtl.Sort_Seq%TYPE,
Tech_Data VARCHAR2(2000),
Text_Code gmd_technical_data_dtl.Text_Code%TYPE);
TYPE technical_data_dtl_tab IS TABLE OF technical_data_dtl_rec

GMD_LCF_UTIL
Get cost GMD_LCF_EXTERNAL_COST This function is called
when external cost is
chosen in the Technical
Parameters window to
get the cost
function.When you select
the Cost Function as the
external cost
functionality, then
GMD_LCF_UTIL.Get_Co
st is used. This package
is modified to pick costs
from external cost
entities.

Index-1

Index
A
APIs
Cost Management, 2-1
Oracle E-Records, 5-1
Process Execution, 6-1
Process Planning, 3-1
Product Development, 7-1
Quality Management, 4-1
understanding, 1-1
C
Cost Management API Package Listings, 2-2
E
Electronic Technical Reference Manual (eTRM),
1-2
Errors, 1-3
I
Integration Repository, 1-2
M
Messages, 1-3
O
Oracle E-Records API Package Listings, 5-2
P
packages
shared, 1-1
Process Execution API Package Listings, 6-1
Process Planning API Package Listings, 3-1
Product Development API package listings, 7-3
Q
Quality Management API package listings, 4-2
T
Technical Reference Manual
electronic, 1-2

OPM API reference guide

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to OPM API reference guide (20)

Recently uploaded (20)

OPM API reference guide