PACE-IT: Wireless LAN Infrastructure (part 1)

Wireless LAN
infrastructure I.

Instructor, PACE-IT Program – Edmonds Community College
Areas of Expertise Industry Certification
 PC Hardware
 Network Administration
 IT Project Management
 Network Design
 User Training
 IT Troubleshooting
Qualifications Summary
Education
 M.B.A., IT Management, Western Governor’s University
 B.S., IT Security, Western Governor’s University
Entrepreneur, executive leader, and proven manger
with 10+ years of experience turning complex issues
into efficient and effective solutions.
Strengths include developing and mentoring diverse
workforces, improving processes, analyzing
business needs and creating the solutions
required— with a focus on technology.

Introduction to wireless network standards.
– Antenna technology.
– Wireless access points.
PACE-IT.

Wireless LAN infrastructure I.

Introduction to IEEE 802.11.
» A set of specifications at the data link (Layer 2) layer and the
physical layer (Layer 1) of the Open System Interconnection
(OSI) model that establishes how wireless network
communication can occur.
• Specifies the use of unlicensed radio frequency (RF) bands
as the carrier for network traffic.
» Specifies half-duplex network communication through the use
of carrier sense multiple access with collision avoidance
(CSMA/CA) as the method of access.
• CSMA/CA technology requires that devices only transmit data
when no other data transmission signal is present on the
carrier wave.
» The specifications have been amended over time to become
common standards.

IEEE 802.11 standards.
» 802.11b: commercially released in 1997 and operates within
the 2.4 GHz industrial, scientific, and medical (ISM) RF band.
• With a bandwidth of 22 MHz, it offers up to 11 separate
channels, of which three do not overlap.
• Has a theoretical throughput of 11 Mbps.
• It is compatible with 802.11g/n.
» 802.11a: commercially released in 1997 and operates within
the 5 GHz Unlicensed National Information Infrastructure (U-
NII) band.
• With a bandwidth of 20 MHz, it offers up to 23 separate
channels, none of which overlap.
• It is not compatible with any other standard.
» 802.11g: commercially released in 2003 and operates within
the 2.4 GHz RF band.
• With a bandwidth of 20 MHz it offers up to 11 separate
channels, of which three do not overlap.
• It is compatible with 802.11b/n/ac.

IEEE 802.11 standards continued.
» 802.11n: commercially released in 2009 and can operate on
both the 2.4 GHz or 5 GHz RF bands at the same time.
• Uses a 20 MHz wide channel within the 2.4 GHz band and a
40 MHz wide channel within the 5 GHz band.
• Has a theoretical throughput of 600 Mbps through the
introduction of multiple-input and multiple-output (MIMO)
technology and beamforming.
• It is compatible with 802.11b/g/ac.
» 802.11ac: commercially released in 2013 and operates on the
5 GHz RF band.
• Available bandwidth varies by administrative setting and can
be dynamically changed by the wireless access point (WAP),
based on how much radio frequency interference (RFI) is
present and how many users are on the wireless network.
• Has a theoretical throughput of over 1 Gbps through the
introduction of multi-user multiple-input and multiple-output
(MU-MIMO) technology and beamforming.
• It is compatible with 802.11g/n.

Why broadcast a wide
signal to a specific device
when it is possible to target
that device specifically?
That is the question that beamforming answered. Once a device
makes a connection to an access point (AP) that is capable of
beamforming, the AP will auto-tune its antenna and transmitter to
more specifically target the device when communication occurs.
This can reduce RFI and increase throughput on the WLAN.
While 802.11n allowed for beamforming, it was not a
standardized option until the implementation of 802.11ac.

The basics.
» Antennas are used to broadcast and receive RF signals and
they fall into two basic categories.
• Omnidirectional antennas are designed to broadcast and
receive signals in all directions.
• Unidirectional antennas are designed to broadcast and
receive signals in a specific direction.
» Antenna placement and type will have an impact on
performance.
– MIMO/MU-MIMO.
» A technology that allows for more than one spatial stream to be
transmitted and received by a single device through the use of
multiple antennas.
• MIMO allows for up to four spatial channels, while MU-MIMO
allows for up to eight spatial channels.
• MU-MIMO also allows for a single signal to be spread across
multiple transmitters—this accounts for the multiple user part
of the name.

A foundation of the wireless LAN (WLAN).
» The wireless access point (WAP), also known as just an
access point (AP) can create a point of entry for wireless to
enter the more traditional wired networking environment.
• It can also be used to join other types of networks.
» WAPs, in most cases, use unlicensed radio frequency (RF)
bands in order to communicate with devices.
» One or more antenna is used in order to radiate and receive RF
signals in a half-duplex manner.
» Wireless routers are common in the small office/home office
(SOHO) environment. They are WAPs that have a router built
into them, reducing the need for networking components.
» Wireless bridges are APs that can bridge wired network
segments together in certain situations.
» WAP performance is impacted by the number of wireless
devices that are attempting to access the network.
• This can be mitigated by adding additional APs to the
network.
» Strategically adding WAPs to the WLAN can allow users to
migrate from one wireless signal to the next—this is called
roaming.

Wireless controllers.
» Are commonly found in wireless networks of medium sized and
larger businesses.
» They are used to control WLANs that have multiple WAPs that
all function as part of a larger WLAN through the use of special
protocols and can increase the usability of the WLAN.
• LWAPP (Lightweight Access Point Protocol) is a Cisco
proprietary protocol that is used by Cisco wireless controllers.
» Dynamic or static VLAN pooling can be established with a
wireless controller.
• Taking the WLAN signals and creating (and controlling)
VLANs to allow more devices to connect to a single AP.
» Wireless controllers are often used to create a wireless network
mesh that seamlessly spans more area than is normally
possible.
• Mobile wireless devices are seamlessly handed off from one
access point to another when they reach the edges of the
signal.

The IEEE 802.11 standards are the specifications that establish how
wireless communications can occur on a network. The 802.11 standards
require that specific RF bands and CSMA/CA technology be used. The
standards have evolved over time and include: 802.11b, 802.11a, 802.11g,
802.11n and 802.11ac. Beamforming was introduced with 802.11n.
Topic
Introduction to wireless
network standards.
Summary
Antennas are used to send and receive RF signals. They may be
omnidirectional or unidirectional in design. Antenna type and placement will
have an impact on WLAN performance. MIMO uses up to four antennas to
provide up to four spatial streams. MU-MIMO can use multiple antennas
and transmitters to spread a signal over up to eight spatial streams.
Antenna technology.
The WAP is a foundational component of the WLAN. It can create an entry
point to the more traditional wired network, or it can be used on its own. It
commonly uses the unlicensed RF to send and receive network traffic.
SOHO APs may have a router built into them. WAPs may be used to bridge
wired networks together. In larger wireless environments, wireless
controllers are used to seamlessly transfer devices from AP to AP.
Wireless access points.

This workforce solution was 100 percent funded by a $3 million grant awarded by the
U.S. Department of Labor's Employment and Training Administration. The solution was
created by the grantee and does not necessarily reflect the official position of the U.S.
Department of Labor. The Department of Labor makes no guarantees, warranties, or
assurances of any kind, express or implied, with respect to such information, including
any information on linked sites and including, but not limited to, accuracy of the
information or its completeness, timeliness, usefulness, adequacy, continued availability
or ownership. Funded by the Department of Labor, Employment and Training
Administration, Grant #TC-23745-12-60-A-53.
PACE-IT is an equal opportunity employer/program and auxiliary aids and services are
available upon request to individuals with disabilities. For those that are hearing
impaired, a video phone is available at the Services for Students with Disabilities (SSD)
office in Mountlake Terrace Hall 159. Check www.edcc.edu/ssd for office hours. Call
425.354.3113 on a video phone for more information about the PACE-IT program. For
any additional special accommodations needed, call the SSD office at 425.640.1814.
Edmonds Community College does not discriminate on the basis of race; color; religion;
national origin; sex; disability; sexual orientation; age; citizenship, marital, or veteran
status; or genetic information in its programs and activities.

PACE-IT: Wireless LAN Infrastructure (part 1)

More Related Content

What's hot (20)

Viewers also liked (12)

Similar to PACE-IT: Wireless LAN Infrastructure (part 1) (20)

More from Pace IT at Edmonds Community College (20)

Recently uploaded (20)

PACE-IT: Wireless LAN Infrastructure (part 1)