Ppa6 lecture ch_21

© 2005 Pearson Prentice Hall This work is protected by United States copyright laws and is provided solely for the use of instructors in teaching their courses and assessing student learning. Dissemination or sale of any part of this work (including on the World Wide Web) will destroy the integrity of the work and is not permitted. The work and materials from it should never be made available to students except by instructors using the accompanying text in their classes. All recipients of this work are expected to abide by these restrictions and to honor the intended pedagogical purposes and the needs of other instructors who rely on these materials. Lecture PowerPoint Chapter 21 Physics: Principles with Applications, 6 th edition Giancoli

Chapter 21 Electromagnetic Induction and Faraday’s Law

Units of Chapter 21 Induced EMF Faraday’s Law of Induction; Lenz’s Law EMF Induced in a Moving Conductor Changing Magnetic Flux Produces an Electric Field Electric Generators Back EMF and Counter Torque; Eddy Currents Transformers and Transmission of Power

Units of Chapter 21 Applications of Induction: Sound Systems, Computer Memory, Seismograph, GFCI Inductance Energy Stored in a Magnetic Field LR Circuit AC Circuits and Reactance LRC Series AC Circuit Resonance in AC Circuits

21.1 Induced EMF Almost 200 years ago, Faraday looked for evidence that a magnetic field would induce an electric current with this apparatus:

21.1 Induced EMF He found no evidence when the current was steady, but did see a current induced when the switch was turned on or off.

21.1 Induced EMF Therefore, a changing magnetic field induces an emf. Faraday’s experiment used a magnetic field that was changing because the current producing it was changing; the previous graphic shows a magnetic field that is changing because the magnet is moving.

21.2 Faraday’s Law of Induction; Lenz’s Law The induced emf in a wire loop is proportional to the rate of change of magnetic flux through the loop. Magnetic flux: (21-1) Unit of magnetic flux: weber, Wb . 1 Wb = 1 T · m 2

This drawing shows the variables in the flux equation: 21.2 Faraday’s Law of Induction; Lenz’s Law

The magnetic flux is analogous to the electric flux – it is proportional to the total number of lines passing through the loop. 21.2 Faraday’s Law of Induction; Lenz’s Law

Faraday’s law of induction: [1 loop] (21-2a) [N loops] (21-2b) 21.2 Faraday’s Law of Induction; Lenz’s Law

The minus sign gives the direction of the induced emf: A current produced by an induced emf moves in a direction so that the magnetic field it produces tends to restore the changed field. 21.2 Faraday’s Law of Induction; Lenz’s Law

Magnetic flux will change if the area of the loop changes: 21.2 Faraday’s Law of Induction; Lenz’s Law

Magnetic flux will change if the angle between the loop and the field changes: 21.2 Faraday’s Law of Induction; Lenz’s Law

Problem Solving: Lenz’s Law Determine whether the magnetic flux is increasing, decreasing, or unchanged. The magnetic field due to the induced current points in the opposite direction to the original field if the flux is increasing; in the same direction if it is decreasing; and is zero if the flux is not changing. Use the right-hand rule to determine the direction of the current. Remember that the external field and the field due to the induced current are different. 21.2 Faraday’s Law of Induction; Lenz’s Law

21.3 EMF Induced in a Moving Conductor This image shows another way the magnetic flux can change:

21.3 EMF Induced in a Moving Conductor The induced current is in a direction that tends to slow the moving bar – it will take an external force to keep it moving.

21.3 EMF Induced in a Moving Conductor The induced emf has magnitude (21-3) Measurement of blood velocity from induced emf:

21.4 Changing Magnetic Flux Produces an Electric Field A changing magnetic flux induces an electric field; this is a generalization of Faraday’s law. The electric field will exist regardless of whether there are any conductors around.

21.5 Electric Generators A generator is the opposite of a motor – it transforms mechanical energy into electrical energy. This is an ac generator: The axle is rotated by an external force such as falling water or steam. The brushes are in constant electrical contact with the slip rings.

21.5 Electric Generators A dc generator is similar, except that it has a split-ring commutator instead of slip rings.

21.5 Electric Generators A sinusoidal emf is induced in the rotating loop ( N is the number of turns, and A the area of the loop): (21-5)

21.6 Back EMF and Counter Torque; Eddy Currents An electric motor turns because there is a torque on it due to the current. We would expect the motor to accelerate unless there is some sort of drag torque. That drag torque exists, and is due to the induced emf, called a back emf.

21.6 Back EMF and Counter Torque; Eddy Currents A similar effect occurs in a generator – if it is connected to a circuit, current will flow in it, and will produce a counter torque. This means the external applied torque must increase to keep the generator turning.

21.6 Back EMF and Counter Torque; Eddy Currents Induced currents can flow in bulk material as well as through wires. These are called eddy currents, and can dramatically slow a conductor moving into or out of a magnetic field.

21.7 Transformers and Transmission of Power A transformer consists of two coils, either interwoven or linked by an iron core. A changing emf in one induces an emf in the other. The ratio of the emfs is equal to the ratio of the number of turns in each coil: (21-6)

21.7 Transformers and Transmission of Power This is a step-up transformer – the emf in the secondary coil is larger than the emf in the primary:

21.7 Transformers and Transmission of Power Energy must be conserved; therefore, in the absence of losses, the ratio of the currents must be the inverse of the ratio of turns: (21-6)

21.7 Transformers and Transmission of Power Transformers work only if the current is changing; this is one reason why electricity is transmitted as ac.

21.8 Applications of Induction: Sound Systems, Computer Memory, Seismograph, GFCI This microphone works by induction; the vibrating membrane induces an emf in the coil

21.8 Applications of Induction: Sound Systems, Computer Memory, Seismograph, GFCI Differently magnetized areas on an audio tape or disk induce signals in the read/write heads.

21.8 Applications of Induction: Sound Systems, Computer Memory, Seismograph, GFCI A seismograph has a fixed coil and a magnet hung on a spring (or vice versa), and records the current induced when the earth shakes.

21.8 Applications of Induction: Sound Systems, Computer Memory, Seismograph, GFCI A ground fault circuit interrupter (GFCI) will interrupt the current to a circuit that has shorted out in a very short time, preventing electrocution.

21.9 Inductance Mutual inductance: a changing current in one coil will induce a current in a second coil. (21-8a) And vice versa; note that the constant M, known as the mutual inductance, is the same: (21-8b)

21.9 Inductance Unit of inductance: the henry, H . 1 H = 1 V · s / A = 1 Ω· s . A transformer is an example of mutual inductance.

21.9 Inductance A changing current in a coil will also induce an emf in itself: (21-9) Here, L is called the self-inductance.

21.10 Energy Stored in a Magnetic Field Just as we saw that energy can be stored in an electric field, energy can be stored in a magnetic field as well, in an inductor, for example. Analysis shows that the energy density of the field is given by: (21-10)

21.11 LR Circuit A circuit consisting of an inductor and a resistor will begin with most of the voltage drop across the inductor, as the current is changing rapidly. With time, the current will increase less and less, until all the voltage is across the resistor.

21.11 LR Circuit If the circuit is then shorted across the battery, the current will gradually decay away. where

21.12 AC Circuits and Reactance Resistors, capacitors, and inductors have different phase relationships between current and voltage when placed in an ac circuit. The current through a resistor is in phase with the voltage.

21.12 AC Circuits and Reactance The current through an inductor lags the voltage by 90 °.

21.12 AC Circuits and Reactance In a capacitor, the current leads the voltage by 90 °.

21.12 AC Circuits and Reactance Both the inductor and capacitor have an effective resistance (ratio of voltage to current), called the reactance. Inductor: Capacitor: (21-11b) (21-12b) Note that both depend on frequency.

21.13 LRC Series AC Circuit Analyzing the LRC series AC circuit is complicated, as the voltages are not in phase – this means we cannot simply add them. Furthermore, the reactances depend on the frequency.

21.13 LRC Series AC Circuit We calculate the voltage (and current) using what are called phasors – these are vectors representing the individual voltages. Here, at t = 0, the current and voltage are both at a maximum. As time goes on, the phasors will rotate counterclockwise.

21.13 LRC Series AC Circuit Some time t later, the phasors have rotated.

21.13 LRC Series AC Circuit The voltages across each device are given by the x-component of each, and the current by its x-component. The current is the same throughout the circuit.

21.13 LRC Series AC Circuit We find from the ratio of voltage to current that the effective resistance, called the impedance, of the circuit is given by: (21-15)

21.14 Resonance in AC Circuits The rms current in an ac circuit is: (21-18) Clearly, I rms depends on the frequency.

21.14 Resonance in AC Circuits We see that I rms will be a maximum when X C = X L ; the frequency at which this occurs is (21-19) This is called the resonant frequency.

Summary of Chapter 21 Magnetic flux: Changing magnetic flux induces emf: Induced emf produces current that opposes original flux change

Summary of Chapter 21 Changing magnetic field produces an electric field Electric generator changes mechanical energy to electrical energy; electric motor does the opposite Transformer uses induction to change voltage:

Summary of Chapter 21 Mutual inductance: Energy density stored in magnetic field: LRC series circuit:

Ppa6 lecture ch_21

More Related Content

What's hot (18)

Similar to Ppa6 lecture ch_21 (20)

Recently uploaded (20)

Ppa6 lecture ch_21