PPT 3 fire.pptx fire detection and extinguisher

FIRE DETECTION AND EXTINGUISHING
SYSTEM

CONTENTS
• Abstract
• Introduction
• Literature Survey
• Problem Statement
• Objectives
• Methodology
• Block Diagram
• Working
• Hardware Requirements
• Software Requirements
• Circuit Diagram
• Cost Analysis
• Advantages
• Applications
• Results
• Conclusion

ABSTRACT
• A fire outbreak is a hazardous activity that leads to
numerous consequences.
• Detecting a fire at an early stage and extinguishing it can
aid in the prevention of various accidents.
• Till now we rely on human resources. This often leads to
risking the life of that person.
• Therefore, fire security becomes an important aspect to
save human lives.
• In this project, a fire Detection and extinguishing System
has been proposed and designed which detects the fire
location and extinguishes the fire by using sprinklers on
triggering the pump.

INTRODUCTION
• A Fire Detection and Extinguishing System is based on IOT Technology.
• In this system, we intend to build a system that could extinguish a small
flame by sensing and moving to the location itself.
• It will automatically detect the fire with the help of sensors.
• Once it detects the fire breakout location, it navigates itself accordingly
to reach the fire source and extinguishes the fire by using built-in fire
extinguishing system.
• For fire detection it is using 3 sensors: flame sensor, smoke sensor and
lm35 sensor.
• Fire extinguishing system will get activated when fire detection system
detects fire.
• If it reaches the breakout point and water pump will start ejecting the
water when it detects fire.
• The key features of this system is to provide surveillance of fire so that
major fire accidents can be prevented and loss of human lives gets
minimized.

LITERATURE SURVEY
• Tawfiqur Rakib, M. A. Rashid Sarkar proposed a fire fighting robot model
which consists of a base platform made up of ‘Kerosene wood’, LM35
sensor for temperature detection, flame sensors to detect the fire and a
water container of 1 litre capacity which is made up of a strong
cardboard that makes it water resistant. The robot has two wheels for its
movement. [1]
• Saravanan P., Soni Ishawarya proposed a model which uses Atmega2560
micro-controller and in which the robot is divided into three basic units
according to their functions which are as locomotive unit, fire detecting
unit and extinguishing unit. Each unit performs their task in order to
achieve the desired output of extinguishing fire. The locomotive unit is
used for the movement of the robot and to avoid the obstacles with the
help of four IR and four ultrasonic [2]

LITERATURE SURVEY
• S. Jakthi Priyanka,R. Sangeetha proposed an android controlled fire
fighting robot which uses Arduino UNO R3. The robot consists of gas
sensor for fire detection, gear motor and motor drive for the movement
of robot, a bluetooth module to connect the robot with the android
device and to control the robot with the smartphone as well. Water
pump and sprinkler is also used in this. [3]
• Nagesh MS, Deepika T V , Stafford Michahial, Dr M Shivakumar proposed
a fire extinguishing robot which employs DTMF (Dual Tone Multi
Frequency Tones) technology for the navigation of the robot and uses a
flame sensor for fire detection that is capable of sensing flame of the
wavelength range 760 to 1100 nm and sensitivity varies from 10cm to
1.5feet. [4]

PROBLEM STATEMENT
• Fire disaster is one of the dangerous problems that can lead to
heavy loss both financially and by taking lives. Sometime it
becomes difficult for fighters to access the site of a fire because
of explosive materials, smoke, and high temperatures. Such
situations risk the lives of fire fighters too. In such environments,
fire-extinguishing systems can be useful.
• This Fire Extinguishing system is based on IOT Technology. In Fire
Extinguishing system, we intend to build a system that could
extinguish a small flame by sensing and moving to the location
itself. Sometime delay in the arrival of fire fighters leads to
numerous consequences. The Fire Extinguishing system
continuously monitors the environment and extinguishes it
without delay.

OBJECTIVES
• To design, build, and test a prototype capable of detecting and
extinguishing fires.
• For effectively replacing firefighters in highly difficult situation.
• The lessen the efforts made by humans so that there may be less
causalities as it can be controlled from safe distance.

METHODOLOGY
• The theme of this project is to automatically sense the environmental
fire and extinguish it without human intervention.
• The methodology is divided into three parts.
• The first part is on the design structure, followed by hardware
description and the finally on the programming design.
• All these three parts were assembled together and experiments were
then performed to build a system that can extinguish the fire that was
carried out.

WORKING
• The hardware part is one of the crucial parts in the development of fire
detection and extinguishing system. It includes Arduino, flame sensor,
smoke sensor, lm35 sensor, submersible water pump, IOT Module,
Buzzer and Relay. Fig shows the block diagram of fire detection and
extinguishing system.
• Arduino is used as a micro-controller that connects other components.
• If any kind of flame/smoke or exceeds the temperature then system will
give input to Arduino. Then Arduino will beep the buzzer, relay will get
ON, and one notification will be sent on IOT.

HARDWARE REQUIREMENTS
• ATMEGA 328 SMD
• Flame Sensor
• Smoke Sensor
• LM 35 Sensor
• Buzzer
• Relay 1
• Pump
• IOT

SOFTWARE REQUIREMENTS
• Arduino IDE
• Embedded C
• Circuito.io

COST ANALYSIS
Sr. No Component Cost
1 Atmega 328 smd 1150
2 Flame Sesnor 350
3 Smoke Sensor 450
4 LM35 Sensor 150
5 IOT Module (ESP 01) 750
6 Buzzer 20
7 Relay 250
8 Water Pump 250
9 Power Adapter 350

ADVANTAGES
• No risk of life of the fire-fighters.
• Can be operated from safer distance.
• After detecting fire it can extinguish automatically.

APPLICATIONS
• Fire Departments.
• Industrial Purposes.
• Rescue Missions
• Automotive companies employing wireless remote control, remote keyless
entry and safety applications.

CONCLUSION
• This project presents a fire detection and extinguishing system and it is
designed and implemented with ATMEGA 328 Microcontroller in embedded
system domain.
• Experimental work has been carried out carefully.
• The result shows that higher efficiency is indeed achieved using the embedded
system.
• The proposed method is verified to be highly beneficial for the fire fighting
purpose, security purpose and also for industrial purpose.

REFERENCES
[1] Tawfiqur Rakib, M. A. Rashid Sarkar, “Design and fabrication of an
autonomous firefighting robot with multi-sensor fire detection using PID
controller”, ICIEV Volume 23 issue-1 JUNE 2016.
[2] Saravanan P., Soni Ishawarya, “Android controlled integrated semi-
autonomous firefighting robot”, International journal of innovative science Engg.
and Technology 2015.
[3] S. Jakthi Priyanka, R. Sangeetha, “Android controlled firefighting robot”,
International of innovative science Engg. and Technology, Volume 3, 2017.
[4] Nagesh MS, Deepika T V, Stafford Michahial, Dr. M Shivakumar, “Fire
Extinguishing Robot”, International Journal of Advanced Research in Computer
and Communication Engineering, Vol. 5, Issue 12, December 2016
[5] Sushrut Khajuria, Rakesh Johar, Varenyam Sharma, Abhideep Bhatti, “ Arduino
Based Fire Fighter Robot”, International Journal of Scientific Engineering and
Research (IJSER), Volume 5 Issue 5, May 2017

PPT 3 fire.pptx fire detection and extinguisher

More Related Content

What's hot (20)

Similar to PPT 3 fire.pptx fire detection and extinguisher (20)

More from PoojaBan (7)

Recently uploaded (20)

PPT 3 fire.pptx fire detection and extinguisher