PREDICTING ROAD ACCIDENT RISK USING GOOGLE MAPS IMAGES AND ACONVOLUTIONAL NEURAL NETWORK

International Journal of Artificial Intelligence & Applications (IJAIA) Vol.10, No.6, November 2019
DOI: 10.5121/ijaia.2019.10605 49
PREDICTING ROAD ACCIDENT RISK USING GOOGLE
MAPS IMAGES AND A CONVOLUTIONAL
NEURAL NETWORK
Aarya Agarwal
Westwood High School, Austin, USA
ABSTRACT
Location specific characteristics of a road segment such as road geometry as well as surrounding road
features can contribute significantly to road accident risk. A Google Maps image of a road segment
provides a comprehensive visual of its complex geometry and the surrounding features. This paper
proposes a novel machine learning approach using Convolutional Neural Networks (CNN) to accident
risk prediction by unlocking the precise interaction of these many small road features that work in
combination to contribute to a greater accident risk. The model has worldwide applicability and a very
low cost/time effort to implement for a new city since Google Maps are available in most places across
the globe. It also significantly contributes to existing research on accident prevention by allowing for the
inclusion of highly detailed road geometry to weigh in on the prediction as well as the new location-
based attributes like proximity to schools and businesses.
KEYWORDS
Deep Learning, Convolutional Neural Networks, Maps Images, Road Accidents
1. INTRODUCTION
1.1. Motivation
In 2016, 1.35 million deaths were caused by road traffic accidents worldwide. An additional 20-
50 million people were injured or disabled due to a road accident. Road accidents are also the
leading cause of death for children and youths ages 5-29. Developing countries, which are
slowly becoming more motorized, fare much worse, with death rates three times higher than
developed countries. The World Bank and the WHO have both declared that the number of
road accidents is much too high in both developed and developing countries and that
governments must take steps to reduce them.
Apart from the social cost of road accidents, there is also a massive economic cost. Many
studies concur that road accidents can cost countries 2% of their GDP. The World Bank stated
that “halving deaths and injuries due to road traffic could potentially add 22% to GDP per capita
in Thailand, 15% in China, 14% in India, over 2014-2038.” It is clear that road accidents pose a
significant economic barrier for developing nations. Thus, reducing road accidents and
improving road safety is of paramount importance, for both developed and developing
countries.
1.2. Previous Work
Many of the current approaches to reducing road accidents are aimed either at making vehicles
safer or at reducing human error through awareness campaigns [1] and safety training for

50
drivers. Other approaches focus on real time traffic flow prediction [2,3] and individual risk
prediction [4]. This research shifts away from the existing work and looks at the road itself to
develop a possible approach to identify accident prone road segments using Google Maps
Images and a Deep Learning approach based on Convolutional Neural Networks.
Previous research has demonstrated that road characteristics can play a role in causing road
accidents. [5] found out through an analysis of crash data that curves, shoulders and super
elevation were more strongly related to crash rate. Though these characteristics may seem
common sense, the research also discovered very specific combinations of road characteristics
which contributed to crash rates (ie. lane changing crashes on larger right curves). If more of
these specific combinations could be identified, then road engineers would be able to design
roads more safely without these combinations of characteristics.
In addition, there has been research to suggest that location features other than road
characteristics can contribute to accident risk. [6] found that community design plays a role in
accident risk. They identified that big-box stores, arterial thoroughfares, and strip commercial
uses were more dangerous than pedestrian scaled retail uses. This may indicate that features
next to road segments (ie. strip malls, retail stores) may make those segments inherently more
dangerous for drivers. Thus, a full analysis of the road segment and its surrounding features
may allow us to make a more accurate assessment of a road accident risk.
There has already been some research in this field of identifying high risk crash sites. [7] carried
out a study of crash sites in California to create a model to identify high risk road segments
based on road characteristics. Software like SafetyAnalyst can also rank order sites based on
frequency of crashes. Though these programs are useful to an extent, there are some problems
with these approaches that reduce their effectiveness. One, they do not consider surrounding
features like malls and restaurants which could play a role in increasing accident risk. Two, they
heavily rely on data that government agencies have collected. Many local governments do not
have the resources to collect this type of data and as a result, any available data is usually
unreliable or incomplete. Three, the data these models rely on are linear discrete values, which
ignore the complexity of road intersections and characteristics. For example, instead of
observing how a curve is oriented in relation to other road characteristics, the data contains a
single number indicating the angle of the curve. Finally, these models are simplistic, and ignore
deep interactions between road characteristics which could influence the accident rate.
1.3. Proposed Solution
This paper overcomes the above limitations by training a convolutional neural network (CNN)
model using past accident data and Google Maps images of accident road segments. The CNN
trains by relating accidents to features present in a Google Maps image (road characteristics,
location features, for example see Figure 1). In the end the model outputs a reliable accident risk
score for a Google Maps image of any location. This paper uses data from cities of Austin,
Chicago and New York to train and test the proposed model.
Convolutional neural networks are a special type of neural network that focus specifically on
image analysis. CNNs can detect patterns not discernible to humans in images and make
predictions based off of them. In this case, a CNN can unlock deep interactions between the
many complex features captured by a Google Maps image and use them to make more accurate
assessments of accident risk. It is possible that a combination of proximity to a certain type of
business and a certain road characteristic is much more dangerous than another such
combination. The CNN should be able to tell the difference and produce an accurate risk score
for both.

51
Figure 1: Google Maps Image
Further, a Google Maps image as input for this model is especially useful for the model to be
universally applicable. While government agencies, especially in developing countries, may or
may not collect crash data reliably, Google continuously updates their Maps information for
navigation, so the data required to feed the model is present almost everywhere. It is readily
accessed through the API Google provides worldwide. This makes the approach presented in
this paper very cost effective and universally available.
2. MATERIALS, METHODS, ANDPROCEDURE
This paper develops a CNN model to predict accidents using Google Maps images. Details of
the model, data and procedure are included below:
2.1. CNN
CNNs work though passing multiple filters randomized with weights across a pixel array of an
image. These filters capture different features of the image and slowly downsize the image until
itan produce a single numerical output. The weights in the filters are adjusted as the network is
trained until the network can accurately identify the image label. In the context of this paper, the
CNN learns the weights for filters to identify certain road features and location attributes (i.e.
curves and icons for businesses). When the model downsizes the image, it is identifying certain
combinations of these features that cause a higher risk of an accident.
2.2. Google Maps Images
These capture many relevant features and very detailed road geometry characteristics that can
contribute to road accident risk. Figure 1 shows that Google Maps images provide a
comprehensive visual of the number of intersecting roads, the angle of intersection, the
sharpness of curvature, the direction of curvature, and the road type and width. If one simply
took the linear data captured by government agencies about simple curvature and intersection,
then they could not make as accurate a representation of the road as is represented in Google
Maps. Most of this complexity is lost when a road is taken and made into linear, discrete data,
but all of this complexity is retained when it is kept in the format of a Maps image.
In addition to the road characteristics, a significant advantage of using Google Maps images is
the surrounding features that are displayed. Looking at Figure 1, it is clear that the image
displays businesses (and through icons the nature of those businesses), schools, gas stations,

52
restaurants, malls, bike trails, the shape and size of nearby buildings, parking lots, parks, and
natural features like forests and water bodies. Further, many other features such as speed limit
and traffic flow can be inferred and learned indirectly from the image. For example, speed limit
can be predicted through the road type. On Google Maps, highways are colored yellow while
normal streets are colored white. One can obviously tell that a yellow road segment probably
has a higher speed limit than a white colored segment. The same can be said for traffic flow.
While Google Maps does not directly display it, it can be inferred through Google’s use of
arrows to indicate lane direction, the width of the road, and the presence of nearby businesses
(more businesses would probably mean more traffic).
2.3. Procedure
Steps involved in creating the CNN are as follows
1. Download relevant crash data
2. Capture Google Maps Images
3. Prepare data for feeding through model
4. Building and Training the model
5. Improving performance of the model
6. Assessing the final performance of the model and testing scalability
Accident data was downloaded from the NYC Open Data Portal for the City of New York1. The
data included 658,309 crash incidents over a time span from 2014-2019. There were 58,494
unique accident locations in the data. The fact that there were more unique incidents than
locations indicates that in some areas, accidents occurred more than once. Each crash recorded
contained data for several attributes related to the accident, including the road type, the exact
location in latitude and longitude, and whether the crash was at an intersection. A graph of the
data distribution for New York is shown in Figure 2. The mean number of accidents per
location was 11.25, the median was 4.5 and standard deviation was 18.86.
Figure 2. New York Accident Data Distribution
For each of the unique locations in the original City of New York data, a Google Maps image
was required as input in the model. To obtain these images, a Python script looped through each

53
location in the crash data and made a call to Google Maps Static API to download the Google
Maps image of the location using the latitude and longitude coordinates present in the data. The
script also specified the zoom level on the maps, the scale of the image, and the type of Google
Maps image.
The type of image that was settled upon was “roadmap” (others like “satellite” and “terrain” did
not display surrounding features). The scale chosen was 50x50 pixels. There was a trade-off
when specifying the zoom level of the image. If the image was too zoomed in, then complexity
of surrounding features was ignored by the model, while if it was too zoomed out, the CNN lost
focus on the actual accident site characteristics. This conclusion was verified after testing the
CNN on some sample data with different zoom levels. Zoom level 18 was selected because the
CNN achieved the highest accuracy with it. From Figure 3 it is clear that though some
surrounding complexity was lost because of zooming in, major features in the image are still
present, such as the intersection, curvature of the road, traffic flow, surrounding streets, and a
couple businesses.
Figure 3. Google Maps Image with Zoom level 18
Google Maps images were present for each crash location, but there were no negatively labeled
images to train the network. That is to say that there were no Google Maps images for locations
which had never had an accident from 2014 to 2019. Feeding only positively labeled data will
cause the CNN to learn to predict a high accident risk score for every image passed through it.
One solution to this is finding random road segments across the city that had no accidents
whatsoever. However, there was a simpler solution with the data already available. Locations
with only one accident can be labeled as a negative, while locations with more than one accident
can be labeled as positive. The reasoning behind this labeling scheme is that locations with only
one accident are most likely not inherently dangerous locations. Any accident caused at those
locations was probably due to human error or some other non-location factor. However, a
location where accidents repeatedly occur indicates that there is some factor in the location itself
which makes it more accident prone. For each location, an aggregate sum of all the accidents
that occurred in the location was calculated. Then the locations were binned – locations with
more than one accident were labeled as 1, while locations with only one accident were labeled
as 0.
To perform holdout cross-validation, data was split into training (93%), validation (3.5%), and
testing (3.5%) buckets. The training data was used to train the network. The validation data was
used to assess the effectiveness of training and adjust the model architecture and
hyperparameters to improve accuracy. The testing data was used to perform a final test in order
to assess the model’s performance in the real world.

54
Figure 4: Architecture of CNN

55
To build and train the CNN, the Keras library in python was used with a TensorFlow backend.
The network was trained on an AWS EC2 p3.2xlarge instance. The architecture of the network
is laid out in Figure 4. The input is a Google Maps image of a location, and the output is a
probability prediction of the label (specifically the probability of the location having repeat
accidents from the years 2014-2019). In total the network had five convolutional layers, and
each of the convolutional layers had a ReLU activation function and underwent batch
normalization to allow for quick convergence. The final activation function was a sigmoid to
ensure the network outputted a probability between 0 and 1. The loss function was binary cross-
entropy, and the model was trained for 60 epochs using a batch size of 32.
After the CNN was completed, attempts to improve its accuracy were made. The image
zooming and scaling was adjusted and the hyperparameters and architecture were optimized.
Class imbalance was an additional issue. The data fed into the model was imbalanced as there
were fewer data points labelled as one (a repeat accident location) as compared to data points
labeled as zero (single accident location). This led to the network simply taking a naïve
approach and always predicting zero. This problem was solved by weighting the neural
network loss function to penalize guessing zero higher. This way the neural network was able
to treat both classes equally.
3. RESULTS
3.1. Results for Initial New York Model
All results and the performance scores were based on the test data set apart in the cross-
validation process, so the model was be evaluated in real world circumstances on data it had
never seen before. All metrics and graphs were obtained using the scikit-learn library. The test
data fed into the model contained an equal representation of each class. Finally, the accuracy
scores were obtained at the optimum threshold (considering other metrics such as precision and
recall).
Figure 5. ROC Curve for the City of New York
The ROC curve for New York is shown in Figure 5. The AUROC was 0.93 and the accuracy
was 85%. The dotted line in the middle represents a completely naïve classifier. Table 1 is the
confusion matrix for the New York model and Table 2 contains precision, recall, and f1 scores
selected for an optimum threshold. The support for each class is close to equal and is also large,
showing that these scores reflect the true performance of the model.

56
Table 1. New York Model Confusion Matrix
Table 2. New York Model Class Based Scores
Table 3. Sample of Risky Locations in New York
A sample of risky locations in New York is shown in Table 3. All of these locations had above
60 accidents from 2014-2019, and the accident risk score of 1.0 predicted by the model
indicates that the model is 100% certain that the locations are risky.
3.2. Robustness Analysis
To ensure that this performance was not just limited to something unique about New York, the
model was retrained using data from Austin and Chicago and tested in those cities. Results for
Austin are based on 66000 crash locations from Texas DOT crash data (2011-2018)2 (shown in
Figure 6). The accuracy achieved was 86% and the AUROC was 0.86. Results for Chicago are
based on 40000 crash locations from CPD crash data (2013-2019)3 as shown in Figure 6. The
accuracy achieved 70% and the AUROC was 0.75. The high AUROC and accuracy across
multiple tested cities suggest that the model has excellent reliability, scalability, and rank

57
ordering capability for accident prediction.
Austin Chicago
Figure 6. ROC Curves for Austin and Chicago
4. DISCUSSION AND CONCLUSIONS
A CNN model was developed to predict accident prone road segments using crash data from
different cities and Google map images. The model achieved the design criteria stated earlier. It
captures road and surrounding characteristics and their interactions and is cost effective and
easy to implement.
4.1. Contribution
The contribution to existing research on accident prevention is significant. This paper proposed
a novel machine learning approach using Google Maps images. The use of Google Maps images
allows for the inclusion of highly complex road geometry which is not currently captured by
models. In addition, the model allows for novel factors to be included in accident prevention,
like proximity to schools, businesses and restaurants.
There are multiple potential applications of the proposed model. It allows for optimal
distribution of limited city resources. Since cities can rank order locations from most dangerous
to least accurately, they can prioritize placing warning signs, police officers and speed monitors
at more dangerous locations. [8] explain that placing police officers in the right locations can
significantly reduce fatality rates in accidents. Self-driving cars and trucks can auto-calculate
risk scores for the current road they are on using the model and alter their driving behavior
(perhaps drive slower when at high-risk sites). Cities can also now identify very high-risk road
segments using the model and then divert funds to redesign them.
A prototype of a real time accident prediction model was created by the author using weather
data (rain, wind, visibility, temperature)4
. Once the output of the CNN was fed into this model,
the accuracy jumped from 37% to 72%. This shows that the output of this model can be fed into
other accident prediction models to improve their performance. Real time accident prediction
models can help place emergency resources at the right locations before accidents even happen.
Finally, the author created a prototype consumer android app for safe driving. It calculates a risk
score for all feasible routes to a destination using the model and maps the safest route. It could

58
be enhanced to warn drivers on risky segments so distracted driving in risky segments is
reduced. An app like this could be especially helpful for senior citizens, teenage drivers, and
people who are driving in unfamiliar locations.
Proposed solution is also very cost effective. The cost of obtaining Google Maps images would
be around $200 for each city (depending on the city size). The economic benefits gained by
preventing crashes far outweighs the negligible cost. Cities can choose to retrain the network for
themselves (in which case they would need data that gives crash locations over a certain time
period) or opt to just use a network that works in another city. Once the model scripts were
created, it took very little time to implement the model for Austin and Chicago. The model also
does not require any manual updates. It can be run once every year to rank order locations
according to the newest Google Maps images. Google will continue to update Maps, so any
changes in road networks will be accounted for.
Overall, the above use case scenarios are applicable anywhere in the world Google Maps is
available including the developing countries.
4.2. Limitations and Future Work
There are a few limitations when using this model. The first is that the model does not consider
driver and vehicle characteristics. Even on very safe roads it is possible for a drunk driver to
cause an accident. In addition, the Google Maps view is limited to a two-dimensional bird’s eye
view of the road segment. There is research to suggest that three dimensional features on roads
can contribute to accident, such as specific roadside vegetation and road shoulders. The model
cannot take this three-dimensional data into account. Another limitation is that the model does
not train based on accident severity. It considers all accidents to be the same regardless of the
number of fatalities involved or the damage caused.
This research can be expanded in multiple ways. Real time traffic data could be included in the
model. The model could also be trained to predict fatalities and the severity of accidents. Three-
dimensional data can be considered by using programs like Google Street View. Another
extension would be to build an end-to-end system where city officials can gather data, train and
predict accidents with a few clicks.
REFERENCES
[1] Hoekstra, Tamara, and Fred Wegman. “Improving the Effectiveness of Road Safety Campaigns:
Current and New Practices.” IATSS Research 34, no. 2 (2011): 80–86.
https://doi.org/10.1016/j.iatssr.2011.01.003.
[2] Polson, Nicholas G., and Vadim O. Sokolov. "Deep learning for short-term traffic flow prediction."
Transportation Research Part C: Emerging Technologies 79 (2017): 1-17.
[3] Zhang, Zhenhua, Qing He, Jing Gao, and Ming Ni. "A deep learning approach for detecting traffic
accidents from social media data." Transportation research part C: emerging technologies 86 (2018):
580-596.
[4] Chen, Quanjun, Xuan Song, Harutoshi Yamada, and Ryosuke Shibasaki. "Learning deep
representation from big and heterogeneous data for traffic accident inference." In Thirtieth AAAI
Conference on Artificial Intelligence. 2016.
[5] Othman, S., Thomson, R., & Lannér, G. (2009, October). Identifying critical road geometry
parameters affecting crash rate and crash type. In Annals of Advances in Automotive

59
Medicine/Annual Scientific Conference (Vol. 53, p.155). Association for the Advancement of
Automotive Medicine.
[6] Dumbaugh, Eric, Yi Zhang, and Wenhao Li. Community design and the incidence of crashes
involving pedestrians and motorists aged 75 and older. No. UTCM 11-03-67. Texas Transportation
Institute. University Transportation Center for Mobility, 2012.
[7] Geyer, Judy, Elena Lankina, Ching-Yao Chan, David Ragland, Trinh Pham, and Ashkan
Sharafsaleh. “Methods for Identifying High Collision Concentration Locations for Potential Safety
Improvements.” CALIFORNIA PARTNERS FOR ADVANCED TRANSIT AND HIGHWAYS,
December 2008.
[8] Rezapour, Mahdi, Shaun S. Wulff, and Khaled Ksaibati. “Effectiveness of Enforcement Resources
in the Highway Patrol in Reducing Fatality Rates.” IATSS Research 42, no. 4 (2018): 259–64.
https://doi.org/10.1016/j.iatssr.2018.04.001.
AUTHORS
Aarya Agarwal is a student at Westwood High school, Austin and he is currently
pursuing an IB diploma. He has completed several machine learning projects and
has submitted several of these projects to prestigious science competitions. His
achievements include 1st place at the Texas State Science Fair and Austin
Regional Science Fair, as well as 2nd place at the Texas Junior Academy of
Sciences for the category of Computer Science/Math

PREDICTING ROAD ACCIDENT RISK USING GOOGLE MAPS IMAGES AND ACONVOLUTIONAL NEURAL NETWORK

More Related Content

What's hot (18)

Similar to PREDICTING ROAD ACCIDENT RISK USING GOOGLE MAPS IMAGES AND ACONVOLUTIONAL NEURAL NETWORK (20)

More from gerogepatton (20)

Recently uploaded (20)

PREDICTING ROAD ACCIDENT RISK USING GOOGLE MAPS IMAGES AND ACONVOLUTIONAL NEURAL NETWORK