Presentation on IoT by tushar
- 1. Machine to Machine Era………..
- 2. Contents:- Definition Scope of IoT Components of IoT Hardware requirements Software requirements Applications of IoT
- 3. Definition:- IoT tries to establish advanced connectivity (with the aid of internet) among the device or systems or services in order to little by little make automation in all areas. 1) The first presence of IoT was felt through the ATM’s, and goes as back as the year 1974. 2) The year 2016 was estimated to have 4.9 billion connected things and it is predicted that by the year 2020 , the connected devices will reach or even exceed 50 billion. 3) Google bought smart thermostat maker, Nest Labs ,for $3.2 billion, and Samsung purchased connected home company SmartThings for $200 million
- 4. Scope of IoT:- 1.Building and Home Automation:- It is related to everything in home which have the potential to • monitor and remote control such as air condition, security lock lightening, heating, ventilation, telephone system, TV to make a comfort , secure, with low energy consumption 2.Health Care systems:- Health care Systems helps to improve patient state better by monitoring and controlling their heart rate or blood pressure or even for their diet. Smart tablet which show us how much does with which gradient can helps patient to get better 3.Infrastructure Management:- Infrastructure Management is useful for monitoring and tracking if there is any problem in urban or rural Infrastructure such as bridges, railway lines or etc. to diminish and reduce risk of danger and any failure in strength would be tested and alarm as soon as possible to repair it.
- 5. Components of IoT:- The internet of things (IoT) is the network of physical devices, vehicles, buildings and other items, which are embedded with i)electronics, software, ii)Sensors iii)actuators, network connectivity that enable these objects to collect and exchange data.
- 6. Hardware Requirements for IoT:- 1.Aurdino Uno (one of the many Aurdino boards available) Arduino Uno has 14 digital input/output pins 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header, a reset button.
- 7. Specifications of Arduino Uno : Microcontroller ATmega328P Operating Voltage 5V Input Voltage (limit) 6-20V Digital I/O Pins 14 ( 6 provide PWM output) PWM Digital I/O Pins 6 Analog Input Pins 6 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328P) SRAM 2 KB (ATmega328P) Clock Speed 16 MHz Length 68.6 mm Width 53.4 mm
- 8. Software components :- The IDE which is required for Arduino Uno is Arduino IDE. It is an open software, freely provided by the Arduinocommunity. Arduino Uno works on programming language embedded C, which is similar to C. The Arduino Integrated Development Environment – or Arduino Software (IDE) - contains a text editor for writing code, a message area, a text console, a toolbar with buttons for common functions and a series of menu.
- 10. Queries ?
- 11. This work combines the effort and knowledge of the persons working on it. The document would not be successful , without the guidance of the honorable resource person and support by the other well wishers. The document fulfills the norms of paper presentation. And I feel optimum amount of information was covered in the document. I personally seek apologies ,if I hurt their feelings. The content for the presentation was derived from various sources listed below:- www.wikipedia.com www.googleimages.com From the works of Mr. Vijay Kumar s