Protection and Switchgear for Engineering

EE3601 PROTECTION AND SWITCHGEAR
VI Semester B.E. EEE

UNIT I PROTECTION SCHEMES
Principles Significance and need for protective schemes – nature and causes of faults
– types of faults – Methods of Grounding - Zones of protection and essential qualities
of protection – Protection scheme
UNIT II ELECTROMAGNETIC BASICS OF RELAYS
Operating principles of relays - the Universal relay – Torque equation – R-X diagram –
Electromagnetic Relays – Over current, Directional, Distance, Differential, Negative
sequence and Under frequency relays.
UNIT III APPARATUS OVERVIEW OF EQUIPMENT PROTECTION
Current transformers and Potential transformers and their applications in protection
schemes -Protection of transformer, generator, motor, bus bars and transmission
line.
UNIT IV STATIC RELAYS AND NUMERICAL PROTECTION
Static relays – Phase, Amplitude Comparators – Synthesis of various relays using
Static comparators – Block diagram of Numerical relays – Over current protection,
transformer differential protection, distant protection of transmission lines.
UNIT V CIRCUIT BREAKERS
Physics of arcing phenomenon and arc interruption - DC and AC circuit breaking – re-
striking voltage and recovery voltage - rate of rise of recovery voltage - resistance
switching – current chopping - interruption of capacitive current - Types of circuit
breakers – air blast, air break, oil, SF6, MCBs, MCCBs and vacuum circuit breakers –
comparison of different circuit breakers – Rating and selection of Circuit breakers.
HVDC Breaker

Relay
• Relay: Relays are electrically operated switches that open
and close the circuits by receiving electrical signals from
outside sources.
• https://amperite.com/blog/relays/#:~:text=Relays%20can%
20reduce%20the%20need,space%20of%20the%20same%20
size.
• Relay: A relay is an automatic device by means of which an
electrical circuit is indirectly controlled (opened or closed)
and is governed by a change in the same or another
electrical circuit
• Protective Relay: A protective relay is an automatic device
which detects an abnormal condition in an electrical circuit
and causes a circuit breaker to isolate the faulty element of
the system. In some cases it may give an alarm or visible
indication to alert operator.

Power-system protection is a branch of electrical power
engineering that deals with the protection of electrical power systems
from faults through the isolation of faulted parts from the rest of the
electrical network.
Switchgear is the combination of electrical disconnect switches, fuses
or circuit breakers used to control, protect and isolate electrical equipment.

Name some Protection devices
Versus

Protection and Switchgear for Engineering

Can we design electrical System without protection
If so what will happen ?

Principles of Protection System
Components of Protection System
When a fault occurs in the protected circuit, the relay connected to
the CT and PT actuates and closes its contacts to complete the trip circuit.
Current flows from the battery in the trip circuit. As the trip coil of the
circuit breaker energized, the circuit breaker operating mechanism is
actuated and it operates for the opening operation to disconnect the faulty
element.

• To avoid damage to the equipment's in a power system under abnormal
conditions
• To isolate a faulty section of electrical power system from rest of the live system
so that the rest portion can function satisfactorily without any severe damage due
to fault current.
• To avoid electric shock
• To maintain stability in the electrical system
• Protection system is necessary to isolate the faulty element as quickly as possible
to keep the healthy section of the system in normal operation
• To improve the system performance, system reliability, system stability and
service continuity.
• The fault can not be completely avoided but can be minimized. Thus the
protective relaying plays an important role in sensing the faults, minimizing the
effects of faults and minimizing the damage due to the faults.
NEED FOR PROTECTIVE SCHEMES

Nature and causes of Fault
Causes of fault:
•Insulation failures
•Conducting path failures
•Lightning
•Switching surges
Insulation Failures : Insulation failures results in short circuits which are very
harmful as they may damage some equipment of the power system
Conducting path failures: If the conductors are broken, there is a failure of the
conducting path and the conductor becomes open-circuited, causes unbalancing in
the power system
Lightning: When lightning fall on the OH line, there is a heavy over voltages occur
in the system, which damages the equipment.
Switching surges: During energizing and de-energizing of lines, charging capacitor
banks causes over voltage in the power system

Types of Fault
• Two broad classification of faults are:
• Symmetrical faults
• Unsymmetrical faults
Symmetrical faults:
A three phase fault is called a symmetrical types of fault, all the
three phases are short circuited. There may be two situations
(i)LLL
(ii)LLL-G
Unsymmetrical faults:
Fault current is unsymmetrical,
(i)Single Phase to Ground fault (L-G)
(ii)Two phase to ground fault (LL-G)
(iii)Phase to Phase (L-L) fault
(iv)Open circuited phases
(v)Winding faults
Simultaneous faults
Two or more faults occurring simultaneously on a system are known
as multiple or simultaneous fault.

Effects of Faults
The following effects on a power system, if it remains unchanged
•Heavy short circuit current may cause damage to equipment.
•Arcs associated with short circuits may cause fire hazards.
•Reduction in the supply voltage of the healthy feeders, resulting in the loss of
industrial loads
•Short circuits may cause unbalancing of supply voltages and current
•Overheating
•Loss of system stability
•Interruption of supply to consumers, thereby causing a loss of revenue
High grade, high speed, reliable protective devices are the essential requirements
of a power system to minimize the effects of faults and other abnormalities

Relay Terminologies
Protective Relay:
A protective relay is an automatic device which detects an abnormal
condition in an electrical circuit and causes a circuit breaker to isolate faulty
element of the system.
Pick-up value:
The threshold value of the actuating quantity (voltage, current, etc ) to
which relay responds.
Reset on drop-out:
The threshold value of the actuating quantity below which the relay is
deenergised.
Operating time:
It is the time which elapses from the instant at which the actuating
quantity exceeds the relay pick-up value to the instant at which relay
closes its contact
Reset time:
It is the time which elapses from the instant at which the actuating falls
below its reset value to the instant at which relay comes back to its
normal position.
Setting:
The value of the actuating quantity at which the relay is set to operate

Electromagnetic Relay:
A relay which operates on the electromagnetic principle
Static Relay:
A relay employs semiconductor diodes, transistors, thyristors, logic
gates, ICs etc
Numerical Relay:
A micro processor is used to perform all the functions of the relay
Overcurrent Relay:
A relay which operates when the actuating current exceeds a certain
preset value
Under Voltage Relay:
A relay which operates when the system voltage falls below a certain
preset value
Directional relay or reverse power relay:
A directional relay is able to detect whether the point of fault lies in the
forward or reverse direction with respect to the relay location.
Polarised relay:
A relay whose operation depends on the direction of current or voltage.

Instantaneous Relay:
An instantaneous relay has no intentional time delay in its operation. It
operates immediately (0.1 sec)
Inverse Time Relay:
A relay in which operating time is inversely proportional to the
magnitude of the operating current.
A relay in which operating time is independent of the magnitude of
the operating current.
Definite time Relay:
Inverse Definite minimum time relay, which gives an inverse time
characteristics at lower values of operating current, and definite time
characteristics at higher values of current
IDMT Relay:
Some times a relay operate even when a fault point is beyond its
reach.
Over Reach:
Some times a relay fail to operate even when a fault point is within its
reach.
Under Reach:

Why overlapping in Zones of protection?
If there were no overlapping in the protective zone, then the failure occurs
in the equipment will not lie in any one of the zones and hence no circuit
breaker would be tripped. The fault occurs in the unprotective system will
damage the equipment and hence disturb the continuity of the supply.

Primary and Back-up Protection
1. Primary protection
2. Backup protection.
The primary protection is the first line of defence and is responsible to protect all the
power system elements from all the types of faults. The backup protection comes into play
only when the primary protection fails.

Say some Reasons why primary protection fails
1. Failure in circuit breaker
2. Failure in protective relay
3. Failure in tripping circuit
4. Failure in D.C. tripping voltage
5. Loss of voltage or current supply to the relay
Methods of Back-up Protection
The methods of back-up protection can be classiﬁed as follows :
1.Relay Back-up
2.Breaker Back-up
3.Remote back-up
4.Centrally Coordinated Back-up

Essential Qualities of Protection
• Selectivity or Discrimination
• Fast Operation
• Sensitivity
• Reliability
• Stability
Selectivity:
The selectivity id the ability of the protective system to identify the faulty
part correctly and disconnect that part without affecting the rest of the healthy part of
system.
Fast Operation:
A protective system must disconnect the faulty system as fast as possible. If
the faulty system is not disconnect for a long time then,
1. The devices carrying fault currents may get damaged.
2. The failure leads to the reduction in system voltage. Such low voltage may affect the
motors and generators running on the consumer sude.
3. If fault persists for long time, then subsequently other faults may get generated

Sensitivity:
The protective system should be sufficiently sensitive so that it can operate
reliably when required. The sensitivity of the system is the ability of the relay system to
operate with low value of actuating quantity.
Reliability:
The protective system must function whenever it is called upon to operate,
since the consequences of non-operation can be very severe
Stability:
The stability is the quality of the protective system due to which the system
remains inoperative and stable under certain specified conditions such as
transients, disturbance, through faults etc. For providing the stability, certain
modifications are required in the system design. In most of the cases time
delays, filter circuits, mechanical and electrical bias are provided to achieve
stable operation during the disturbances.

Grounding
The process of connecting the metallic frame (i.e. non-current carrying part)
of electrical equipment or some electrical part of the system (e.g. neutral
point in a star-connected system, one conductor of the secondary of a
transformer etc.) to earth (i.e. soil) is called Grounding or earthing.
If grounding is done systematically in the line of the power system, we can
effectively prevent accidents and damage to the equipment of the power
system and at the same time continuity of supply can be maintained

Human Body Resistance Value:
Under dry conditions, the resistance offered by the human body
may be as high as 100,000 Ohms. Wet or broken skin may drop
the body's resistance to 1,000 Ohms," adding that "high-voltage
electrical energy quickly breaks down human skin, reducing the
human body's resistance to 500 Ohms

Grounding (or) Earthing
• In power system, grounding or earthing means
connecting frame of electrical equipment (non-current
carrying part) or some electrical part of the system (e.g.
neutral point in a star-connected system, one
conductor of the secondary of a transformer etc.) to
earth i.e. soil.
• This connection to earth may be through a conductor or
some other circuit element (e.g. a resistor, a circuit
breaker etc.) depending upon the situation.

Advantages of Grounding:
• First, it provides protection to the power system. For
example, if the neutral point of a star-connected system
is grounded through a circuit breaker and phase to
earth fault occurs on any one line, a large fault current
will flow through the circuit breaker. The circuit breaker
will open to isolate the faulty line.

Advantages of Grounding:
• Secondly, earthing of electrical equipment (e.g.
domestic appliances, hand-held tools, industrial motors
etc.) ensures the safety of the persons handling the
equipment.
• For example, if insulation fails, there will be a direct
contact of the live conductor with the metallic part (i.e.
frame) of the equipment. Any person in contact with
the metallic part of this equipment will be subjected to
a dangerous electrical shock which can be fatal.

• The process of connecting the metallic frame (i.e. non-
current carrying part) of electrical equipment or some
electrical part of the system (e.g. neutral point in a star-
connected system, one conductor of the secondary of a
transformer etc.) to earth (i.e. soil) is called grounding
or earthing.
• Grounding or earthing may be classified as :
(i) Equipment grounding
(ii) System grounding.

• Equipment grounding deals with earthing the non-
current-carrying metal parts of the electrical
equipment.
• On the other hand, system grounding means earthing
some part of the electrical system e.g. earthing of
neutral point of star-connected system in generating
stations and sub-stations.

Equipment Grounding
• The process of connecting non-current-carrying metal
parts (i.e. metallic enclosure) of the electrical equipment
to earth (i.e. soil) in such a way that in case of insulation
failure, the enclosure effectively remains at earth
potential is called equipment grounding.
• we shall divide the equipment grounding into three
heads viz.
• (i) Ungrounded enclosure
• (ii) enclosure connected to neutral wire
• (iii) ground wire connected to enclosure.

Equipment Grounding
• (i) Ungrounded enclosure.

Equipment Grounding
• (ii) Enclosure connected to neutral wire.

Equipment Grounding
• (iii) Ground wire (Green color) connected to enclosure.

System Grounding
• The process of connecting some electrical part of the
power system (e.g. neutral point of a star connected
system, one conductor of the secondary of a
transformer etc.) to earth (i.e. soil) is called system
grounding.
• The system grounding has assumed considerable
importance in the fast expanding power system.
• By adopting proper schemes of system grounding, we
can achieve many advantages including protection,
reliability and safety to the power system network.

Ungrounded Neutral System Grounding

Circuit behavior under single line to ground-fault.
• The capacitive currents IR and IY flow through the lines R and Y respectively.
The voltages driving IR and IY are VBR and VBY respectively. Note that VBR and
VBY are the line voltages [See Fig. (ii)]. The paths of IR and IY are essentially
capacitive. Therefore, IR leads VBR by 90° and IY leads VBY by 90° as shown in
Fig. (ii). The capacitive fault current IC in line B is the phasor sum of IR and IY .

when single line to ground fault occurs on an ungrounded neutral
system, the following effects are produced in the system.
• (i) The potential of the faulty phase becomes equal to ground
potential. However, the voltages of the two remaining healthy
phases rise from their normal phase voltages to full line value.
This may result in insulation breakdown.
• (ii) The capacitive current in the two healthy phases increase to 3
times the normal value.
• (iii) The capacitive fault current (IC) becomes 3 times the normal
per phase capacitive current.
• (iv) This system cannot provide adequate protection against
earth faults. It is because the capacitive fault current is small in
magnitude and cannot operate protective devices.

• (v) The capacitive fault current IC flows into earth.
Experience shows that IC in excess of 4A is sufficient to
maintain an arc in the ionized path of the fault. If this
current is once maintained, it may exist even after the
earth fault is cleared. This phenomenon of persistent
arc is called arcing ground.
• Due to arcing ground, the system capacity is charged
and discharged in a cyclic order. This sets up high-
frequency oscillations on the whole system and the
phase voltage of healthy conductors may rise to 5 to 6
times its normal value. The overvoltages in healthy
conductors may damage the insulation in the line.

Neutral Grounding
• The process of connecting neutral point of 3-phase
system to earth (i.e. soil) either directly or through some
circuit element (e.g. resistance, reactance etc.) is called
neutral grounding.

Advantages of Neutral Grounding
• (i) Voltages of the healthy phases do not exceed line to
ground voltages i.e. they remain nearly constant.
• (ii) The high voltages due to arcing grounds are
eliminated.
• (iii) The protective relays can be used to provide
protection against earth faults. In case earth fault occurs
on any line, the protective relay will operate to isolate
the faulty line.
• (iv) The overvoltages due to lightning are discharged to
earth.
• (v) It provides greater safety to personnel and
equipment.
• (vi) It provides improved service reliability.
• (vii) Operating and maintenance expenditures are
reduced.

Methods of Neutral Grounding
• (i) Solid or effective grounding
• (ii) Resistance grounding
• (iii) Reactance grounding
• (iv) Peterson-coil grounding

Solid Grounding
• When the neutral point of a 3-phase system (e.g. 3-
phase generator, 3-phase transformer etc.) is directly
connected to earth (i.e. soil) through a wire of negligible
resistance and reactance, it is called solid grounding or
effective grounding.

Solid Grounding
• Disadvantages. The following are the disadvantages of
solid grounding :
• (i) Since most of the faults on an overhead system are
phase to earth faults, the system has to bear a large
number of severe shocks. This causes the system to
become unstable.
• (ii) The solid grounding results in heavy earth fault
currents. Since the fault has to be cleared by the circuit
breakers, the heavy earth fault currents may cause the
burning of circuit breaker contacts.
• (iii) The increased earth fault current results in greater
interference in the neighbouring communication lines.

Solid Grounding
• Applications. Solid grounding is usually employed
where the circuit impedance is sufficiently high so
as to keep the earth fault current within safe
limits. This system of grounding is used for
voltages upto 33 kV with total power capacity not
exceeding 5000 kVA.

Resistance Grounding
• When the neutral point of a 3-phase system (e.g. 3-
phase generator, 3-phase transformer etc.) is connected
to earth (i.e. soil) through a resistor, it is called
resistance grounding.

Resistance Grounding
• Disadvantages.
• (i) Since the system neutral is displaced during earth
faults, the equipment has to be insulated for higher
voltages.
• (ii) This system is costlier than the solidly grounded
system.
• (iii) A large amount of energy is produced in the
earthing resistance during earth faults. Sometimes it
becomes difficult to dissipate this energy to
atmosphere.
• Applications. It is used on a system operating at
voltages between 2.2 kV and 33 kV with power source
capacity more than 5000 kVA.

Reactance Grounding
• The purpose of reactance is to limit the earth fault
current. By changing the earthing reactance, the earth
fault current can to changed to obtain the conditions
similar to that of solid grounding.
• This method is not used these days because of the
following disadvantages :
• (i) In this system, the fault current required to operate
the protective device is higher than that of resistance
grounding for the same fault conditions.
• (ii) High transient voltages appear under fault
conditions.

Arc Suppression Coil Grounding
(or Resonant Grounding)
• We have seen that capacitive currents are responsible
for producing arcing grounds. These capacitive currents
flow because capacitance exists between each line and
earth. If inductance L of appropriate value is connected
in parallel with the capacitance of the system, the fault
current IF flowing through L will be in phase opposition
to the capacitive current IC of the system.
• If L is so adjusted that IL = IC, then resultant current in
the fault will be zero. This condition is known as
resonant grounding.
• When the value of L of arc suppression coil is such that
the fault current IF exactly balances the capacitive
current IC, it is called resonant grounding.

Arc Suppression Coil Grounding
(or Resonant Grounding)

Arc Suppression Coil Grounding (or Resonant Grounding)

Arc Suppression Coil Grounding (or Resonant Grounding)
• Advantages. The Peterson coil grounding has the
following advantages:
• (i) The Peterson coil is completely effective in
preventing any damage by an arcing ground.
• (ii) The Peterson coil has the advantages of ungrounded
neutral system.
• Disadvantages. The Peterson coil grounding has the
following disadvantages :
• (i) Due to varying operational conditions, the
capacitance of the network changes from time to time.
Therefore, inductance L of Peterson coil requires
readjustment.
• (ii) The lines should be transposed.

Earthing Transformer
When a transformer is used for the purpose of providing a neutral point for grounding
purpose in a system where the neutral point of a three phase system are not available or
where the transformers or generators are delta connected, that type of transformer is
called Earthing or neutral grounding transformer.

Protective Schemes
A Protective Scheme is used to protect an equipment or a
section of the line. The Common protective schemes which are
usually used for the protection of a modern power system.
❖Over current Protection
❖Distance Protection
❖Carrier current protection
❖Differential Protection

Over Current Protection Scheme
❖It is used for the protection of distribution lines, large motors, equipment,
etc.
❖It includes one or more over current relays.
❖An over current relay operates when the current exceeds its pick-up value.
Distance Protection scheme
❖It is used for the protection of transmission or sub transmission lines; usually
33 kV, 66 kV and 132 kV lines.
❖It includes a number of distance relays of the same or different types.
❖A Distance relay measures the distance between the relay location and the
point of fault in terms of impedance, reactance, mho etc.
❖It operates when the fault point lies within the protected section of the line.

Carrier current protection scheme
❖It is used for the protection of EHV and UHV lines, generally 132 kV
and above
❖A carrier signal in the range of 50-500 kc/sec is generated for this
purpose.
❖A transmitter and receiver is installed at each end of transmission line
to be protected.
❖Depending on the information, relays placed at each end trip if the
fault lies within the protected zone.
❖Relays and tripping operation is controlled by carrier signal

Differential protection scheme
❖ It is used for the protection of generators, transformers, motors of
very large size bus zones etc.
❖ CT’s are placed at both end of each winding of a machine.
❖ The relay compares the current entering a machine winding and
leaving the machine winding.
❖ Under normal condition or external fault both current is same, no
current will flow through the relay. So the relay will not operate
❖ In the case of internal fault the difference in current will flow
through the relay. So the relay will not operate

Unit Protection system
Only faults occurring within its protected zone are isolated.
Non Unit Protection system
It is activated even when the faults are external to its protected zone.
Pilot Protection
❖ It is used for the protection of transmission line sections. It is under the
category of unit protection
❖ Interconnecting channel is used for comparing actuating quality. Such a
interconnecting channel is called pilot.
1. Wire pilot
2. Carrier current pilot
3.Micowave pilot.

Protection and Switchgear for Engineering

More Related Content

What's hot (20)

Similar to Protection and Switchgear for Engineering (20)

Recently uploaded (20)

Protection and Switchgear for Engineering