Puppy430 tutorial-english

1Alex Gotev – Introduction to Puppy Linux: installation on a USB Flash Disk
Novara, 2009-10-24
Introduction to Puppy Linux:
Installation on a USB Flash Disk
Alex Gotev

Novara, 2009-10-24
Contents
What is Puppy Linux?
How can I have it?
How do I boot it?
What programs does it include?
Installation on a USB Flash Disk

Novara, 2009-10-24
What is Puppy Linux?
Puppy Linux is a GNU/Linux LiveCD distribution
developed by Barry Kauler. It's designed to be
fast and small. It can be run and installed even on
very old hardware (Pentium I) and it's light and
portable.
The entire operating system and all the
applications are runned from the RAM (if there's
enough on the PC) and this grants great
performaces to Puppy Linux.
Even if it's possibile to install it on the Hard Drive
like the other Linux distributions, this is not
necessary, because the OS can be used from CD
or USB without changing any setting on the host
PC's OS.

Novara, 2009-10-24
How can I have Puppy Linux?
Go to the official website: http://www.puppylinux.org
Click on “Download Puppy Linux 4.30”

Novara, 2009-10-24
Click on: pup-430.iso and choose where to save the file

Novara, 2009-10-24
After you have downloaded the file, open it with your favourite
CD burning program:
– CDBurnerXP, freeware, website: http://cdburnerxp.se
– ImgBurn, freeware, website: http://www.imgburn.com
– Nero, shareware, website: http://www.nero.com
Burning CD Examples with CDBurnerXP and Nero

Novara, 2009-10-24
Burning Puppy CD with CDBurnerXP
Open CDBurnerXP from Start menu or from its desktop icon.
Select “Burn ISO image” and click on OK

Novara, 2009-10-24
Burning Puppy CD with CDBurnerXP
Click on the button “...”
A Dialog window will be opened asking you for the Puppy ISO
file that we have downloaded. Find where you have saved it,
select it and confirm by clicking on OK
Insert an empty CD in your burning device and click on “Burn”
Select from
here the file
that we have
downloaded

Novara, 2009-10-24
Burning Puppy CD with Nero
Right-click on the ISO file that we have downloaded and
choose Open With.. > Nero Burning ROM from the menu

Novara, 2009-10-24
Burning Puppy CD with Nero
Insert an empty CD in your CD/DVD burner and click on
“Write”

Novara, 2009-10-24
Boot Puppy Linux from CD
Insert the previosly burned Puppy Linux CD to your CD/DVD
Rom reader and reboot your PC
After the “beep” of the PC if a message similar to this is
shown: “Press any key to boot from CD...”, press a key
If nothing is shown or if the OS installed on the PC boots
automatically, you have to setup the boot-up device priority in
your BIOS. For more information on how to do this, visit:
http://www.hiren.info/pages/bios-boot-cdrom

Novara, 2009-10-24
If all the settings of the PC are correct, once you have
rebooted it you will see this:

Novara, 2009-10-24
After a series of command line messages, a dialog like this will
be shown on the screen, asking you to select your keyboard
layout. Use the arrow keys to scroll the list until you find your
layout. Once you're done, press ENTER to continue

Novara, 2009-10-24
Next, you will be asked to select the localization for your
country. Scroll the list until you find yours and press ENTER.

Novara, 2009-10-24
Select the timezone of your country. Press ENTER to continue

Novara, 2009-10-24
Video configuration: press ENTER to continue

Novara, 2009-10-24
Video configuration: select your preferred resolution from the
dialog (the most common are 800x600 and 1024x768). Press
ENTER to continue

Novara, 2009-10-24
All the configurations are done!!
Are you ready to see Puppy Linux?

Novara, 2009-10-24
Puppy Linux's Desktop

Novara, 2009-10-24
Main programs of Puppy Linux
File Browser Puppy Linux's control panel
MediaPlayer for audio and
video
Compressed archives
manager(ZIP,RAR,TAR,...)
Internet browser
(SeaMonkey)
Mail client
(similar to OutlookExpress)
Chat program compatible
with the standards of:
MSN,Yahoo,ICQ,...
Word and Excel substitutes,
compatible with MS Office standards
Add/Remove applications
Two graphic programs: the 1st
is similar to MS Paint with
some additions and the 2nd
is a light version of Inkscape

Novara, 2009-10-24
Install Puppy Linux on a
USB Flash Disk
(in about 5 minutes!)

Novara, 2009-10-24
Installing Puppy on USB Flash Disk - 1
Open Menu>Setup>BootFlash install Puppy to USB
The program that we have
launched will format the USB
drive and will make it bootable
Save all the data that are present
on the USB Drive first, because
everything will be erased from it!
WARNING!

Novara, 2009-10-24
Select USB-HDD (hard drive) and press OK

Novara, 2009-10-24
Insert the USB drive in one of your USB ports and wait until it's
been recognized:
Next, press OK to continue

Novara, 2009-10-24
Select the USB Flash Disk from the list and click on OK on the
two windows to continue.

Novara, 2009-10-24
Wait until the formatting ends
Next, click on “Exit, finished” to exit from the USB formatting
application

Novara, 2009-10-24
Open Menu>Setup>Puppy Universal Installer
With the Universal Installer we
can install Puppy Linux to
almost any device. In this case
we will use it to copy the
system files to the already
formatted and bootable USB
Flash Disk that we've created

Novara, 2009-10-24
Select “USB Flash Drive” from the list and click on OK. On the
next window that will appear click OK to confirm and continue

Novara, 2009-10-24
Click on OK to confirm the installation. On the next window
that will appear, click on “CD” to tell the installer to copy
Puppy system files directly from the LiveCD

Novara, 2009-10-24
Click on OK on the following two windows to start the default
installation for USB devices

Novara, 2009-10-24
Click on the terminal window and then press ENTER to begin
the final installation procedure
Press ENTER again to continue without erasing anything from
the USB that we have already prepared

Novara, 2009-10-24
If we want to set Puppy to work by default with less than
256MB of RAM, press ENTER. Otherwise, type in a random
letter from the keyboard and press ENTER(recommended).
Typing in a letter and pressing ENTER will set Puppy to
automatically choose the best RAM option according to the
amount of RAM of the host PC

Novara, 2009-10-24
When the installation will be finished, press ENTER
The installation is finished! Now you're ready to go
anywhere with your own Puppy USB operating system in your
pocket!
The main advantage of installing Puppy to USB is that you can
have all your files and settings everywhere you are, without
having to carry anything else with you! Another interesting
fact is that the host OS on the PCs where you will use it will not
be affected in any way. Nothing will be saved on them,
preserving your privacy!

Novara, 2009-10-24
THANK YOU FOR YOUR ATTENTION!
Alex Gotev
High school diplomated in Computer Technology and
student of Computer Engineering
at Politecnico di Milano
e-mail: alexgotev@gmail.com

Puppy430 tutorial-english

More Related Content

What's hot (19)

Similar to Puppy430 tutorial-english (20)

More from mimarsinantl (7)

Recently uploaded (20)

Puppy430 tutorial-english