![Tutorials Point, Simply Easy Learning
Invoking the interpreter without passing a script file as a parameter brings up the following
prompt:
root# python
Python 2.5 (r25:51908, Nov 6 2007, 16:54:01)
[GCC 4.1.2 20070925 (Red Hat 4.1.2-27)] on linux2
Type "help", "copyright", "credits" or "license" for more info.
>>>
Type the following text to the right of the Python prompt and press the Enter key:
>>> print "Hello, Python!";
This will produce following result:
Hello, Python!
Python Identifiers:
A Python identifier is a name used to identify a variable, function, class, module, or other
object. An identifier starts with a letter A to Z or a to z or an underscore (_) followed by zero or
more letters, underscores, and digits (0 to 9).
Python does not allow punctuation characters such as @, $, and % within identifiers. Python is a
case sensitive programming language. Thus Manpower and manpower are two different
identifiers in Python.
Here are following identifier naming convention for Python:
Class names start with an uppercase letter and all other identifiers with a lowercase
letter.
Starting an identifier with a single leading underscore indicates by convention that the
identifier is meant to be private.
Starting an identifier with two leading underscores indicates a strongly private
identifier.
If the identifier also ends with two trailing underscores, the identifier is a language-
defined special name.
Reserved Words:
The following list shows the reserved words in Python. These reserved words may not be used
as constant or variable or any other identifier names.
Keywords contain lowercase letters only.
and exec not
assert finally or
break for pass
2|Page](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-2-320.jpg)
![Tutorials Point, Simply Easy Learning
class from print
continue global raise
def if return
del import try
elif in while
else is with
except lambda yield
Lines and Indentation:
One of the first caveats programmers encounter when learning Python is the fact that there are
no braces to indicate blocks of code for class and function definitions or flow control. Blocks of
code are denoted by line indentation, which is rigidly enforced.
The number of spaces in the indentation is variable, but all statements within the block must be
indented the same amount. Both blocks in this example are fine:
if True:
print "True"
else:
print "False"
However, the second block in this example will generate an error:
if True:
print "Answer"
print "True"
else:
print "Answer"
print "False"
Multi-Line Statements:
Statements in Python typically end with a new line. Python does, however, allow the use of the
line continuation character () to denote that the line should continue. For example:
total = item_one +
item_two +
item_three
Statements contained within the [], {}, or () brackets do not need to use the line continuation
character. For example:
3|Page](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-3-320.jpg)
![Tutorials Point, Simply Easy Learning
days = ['Monday', 'Tuesday', 'Wednesday',
'Thursday', 'Friday']
Quotation in Python:
Python accepts single ('), double (") and triple (''' or """) quotes to denote string literals, as long
as the same type of quote starts and ends the string.
The triple quotes can be used to span the string across multiple lines. For example, all the
following are legal:
word = 'word'
sentence = "This is a sentence."
paragraph = """This is a paragraph. It is
made up of multiple lines and sentences."""
Comments in Python:
A hash sign (#) that is not inside a string literal begins a comment. All characters after the #
and up to the physical line end are part of the comment, and the Python interpreter ignores
them.
#!/usr/bin/python
# First comment
print "Hello, Python!"; # second comment
This will produce following result:
Hello, Python!
A comment may be on the same line after a statement or expression:
name = "Madisetti" # This is again comment
You can comment multiple lines as follows:
# This is a comment.
# This is a comment, too.
# This is a comment, too.
# I said that already.
Using Blank Lines:
A line containing only whitespace, possibly with a comment, is known as a blank line, and
Python totally ignores it.
In an interactive interpreter session, you must enter an empty physical line to terminate a
multiline statement.
Multiple Statements on a Single Line:
4|Page](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-4-320.jpg)
![Tutorials Point, Simply Easy Learning
Dictionary
Python Numbers:
Number objects are created when you assign a value to them. For example:
var1 = 1
var2 = 10
Python supports four different numerical types:
int (signed integers)
long (long integers [can also be represented in octal and hexadecimal])
float (floating point real values)
complex (complex numbers)
Here are some examples of numbers:
int long float complex
10 51924361L 0.0 3.14j
100 -0x19323L 15.20 45.j
-786 0122L -21.9 9.322e-36j
080 0xDEFABCECBDAECBFBAEl 32.3+e18 .876j
-0490 535633629843L -90. -.6545+0J
-0x260 -052318172735L -32.54e100 3e+26J
0x69 -4721885298529L 70.2-E12 4.53e-7j
Python Strings:
Strings in Python are identified as a contiguous set of characters in between quotation marks.
Example:
str = 'Hello World!'
print str # Prints complete string
print str[0] # Prints first character of the string
print str[2:5] # Prints characters starting from 3rd to 6th
print str[2:] # Prints string starting from 3rd character
print str * 2 # Prints string two times
print str + "TEST" # Prints concatenated string
6|Page](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-6-320.jpg)
![Tutorials Point, Simply Easy Learning
Python Lists:
Lists are the most versatile of Python's compound data types. A list contains items separated by
commas and enclosed within square brackets ([]).
#!/usr/bin/python
list = [ 'abcd', 786 , 2.23, 'john', 70.2 ]
tinylist = [123, 'john']
print list # Prints complete list
print list[0] # Prints first element of the list
print list[1:3] # Prints elements starting from 2nd to 4th
print list[2:] # Prints elements starting from 3rd element
print tinylist * 2 # Prints list two times
print list + tinylist # Prints concatenated lists
Python Tuples:
A tuple is another sequence data type that is similar to the list. A tuple consists of a number of
values separated by commas. Unlike lists, however, tuples are enclosed within parentheses.
Tuples can be thought of as read-only lists.
tuple = ( 'abcd', 786 , 2.23, 'john', 70.2 )
tinytuple = (123, 'john')
print tuple # Prints complete list
print tuple[0] # Prints first element of the list
print tuple[1:3] # Prints elements starting from 2nd to 4th
print tuple[2:] # Prints elements starting from 3rd element
print tinytuple * 2 # Prints list two times
print tuple + tinytuple # Prints concatenated lists
Python Dictionary:
Python 's dictionaries are hash table type. They work like associative arrays or hashes found in
Perl and consist of key-value pairs.
tinydict = {'name': 'john','code':6734, 'dept': 'sales'}
print dict['one'] # Prints value for 'one' key
print dict[2] # Prints value for 2 key
print tinydict # Prints complete dictionary
print tinydict.keys() # Prints all the keys
print tinydict.values() # Prints all the values
Python - Basic Operators:
Operator Description Example
+ Addition - Adds values on either side of a + b will give 30
the operator
7|Page](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-7-320.jpg)
![Tutorials Point, Simply Easy Learning
Similar to the if statement syntax, if your while clause consists only of a single statement, it
may be placed on the same line as the while header.
Here is an example of a one-line while clause:
while expression : statement
The for Loop:
The syntax of the loop look is:
for iterating_var in sequence:
statements(s)
Iterating by Sequence Index:
An alternative way of iterating through each item is by index offset into the sequence itself:
fruits = ['banana', 'apple', 'mango']
for index in range(len(fruits)):
print 'Current fruit :', fruits[index]
print "Good bye!"
The break Statement:
The break statement in Python terminates the current loop and resumes execution at the next
statement, just like the traditional break found in C.
The most common use for break is when some external condition is triggered requiring a hasty
exit from a loop. The break statement can be used in both while and for loops.
for letter in 'Python': # First Example
if letter == 'h':
break
print 'Current Letter :', letter
var = 10 # Second Example
while var > 0:
print 'Current variable value :', var
var = var -1
if var == 5:
break
print "Good bye!"
The continue Statement:
The continue statement in Python returns the control to the beginning of the while loop. The
continue statement rejects all the remaining statements in the current iteration of the loop and
moves the control back to the top of the loop.
The continue statement can be used in both while and for loops.
13 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-13-320.jpg)
![Tutorials Point, Simply Easy Learning
The statement return [expression] exits a function, optionally passing back an
expression to the caller. A return statement with no arguments is the same as return
None.
Syntax:
def functionname( parameters ):
"function_docstring"
function_suite
return [expression]
By default, parameters have a positional behavior, and you need to inform them in the same
order that they were defined.
Example:
Here is the simplest form of a Python function. This function takes a string as input parameter
and prints it on standard screen.
def printme( str ):
"This prints a passed string into this function"
print str
return
Calling a Function
Defining a function only gives it a name, specifies the parameters that are to be included in the
function, and structures the blocks of code.
Once the basic structure of a function is finalized, you can execute it by calling it from another
function or directly from the Python prompt.
Following is the example to call printme() function:
#!/usr/bin/python
# Function definition is here
def printme( str ):
"This prints a passed string into this function"
print str;
return;
# Now you can call printme function
printme("I'm first call to user defined function!");
printme("Again second call to the same function");
This would produce following result:
I'm first call to user defined function!
Again second call to the same function
Python - Modules:
15 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-15-320.jpg)
![Tutorials Point, Simply Easy Learning
A module allows you to logically organize your Python code. Grouping related code into a
module makes the code easier to understand and use.
A module is a Python object with arbitrarily named attributes that you can bind and reference.
Simply, a module is a file consisting of Python code. A module can define functions, classes, and
variables. A module can also include runnable code.
Example:
The Python code for a module named aname normally resides in a file named aname.py. Here's
an example of a simple module, hello.py
def print_func( par ):
print "Hello : ", par
return
The import Statement:
You can use any Python source file as a module by executing an import statement in some other
Python source file. import has the following syntax:
import module1[, module2[,... moduleN]
When the interpreter encounters an import statement, it imports the module if the module is
present in the search path. Asearch path is a list of directories that the interpreter searches
before importing a module.
Example:
To import the module hello.py, you need to put the following command at the top of the script:
#!/usr/bin/python
# Import module hello
import hello
# Now you can call defined function that module as follows
hellp.print_func("Zara")
This would produce following result:
Hello : Zara
A module is loaded only once, regardless of the number of times it is imported. This prevents
the module execution from happening over and over again if multiple imports occur.
Opening and Closing Files:
The open Function:
16 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-16-320.jpg)
![Tutorials Point, Simply Easy Learning
Before you can read or write a file, you have to open it using Python's built-in open() function.
This function creates a file object which would be utilized to call other support methods
associated with it.
Syntax:
file object = open(file_name [, access_mode][, buffering])
Here is paramters detail:
file_name: The file_name argument is a string value that contains the name of the file
that you want to access.
access_mode: The access_mode determines the mode in which the file has to be
opened ie. read, write append etc. A complete list of possible values is given below in
the table. This is optional parameter and the default file access mode is read (r)
buffering: If the buffering value is set to 0, no buffering will take place. If the buffering
value is 1, line buffering will be performed while accessing a file. If you specify the
buffering value as an integer greater than 1, then buffering action will be performed
with the indicated buffer size. This is optional paramter.
Here is a list of the different modes of opening a file:
Modes Description
r Opens a file for reading only. The file pointer is placed at the beginning of the file. This
is the default mode.
rb Opens a file for reading only in binary format. The file pointer is placed at the beginning
of the file. This is the default mode.
r+ Opens a file for both reading and writing. The file pointer will be at the beginning of the
file.
rb+ Opens a file for both reading and writing in binary format. The file pointer will be at the
beginning of the file.
w Opens a file for writing only. Overwrites the file if the file exists. If the file does not
exist, creates a new file for writing.
wb Opens a file for writing only in binary format. Overwrites the file if the file exists. If the
file does not exist, creates a new file for writing.
w+ Opens a file for both writing and reading. Overwrites the existing file if the file exists. If
the file does not exist, creates a new file for reading and writing.
wb+ Opens a file for both writing and reading in binary format. Overwrites the existing file if
the file exists. If the file does not exist, creates a new file for reading and writing.
a Opens a file for appending. The file pointer is at the end of the file if the file exists.
That is, the file is in the append mode. If the file does not exist, it creates a new file for
17 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-17-320.jpg)
![Tutorials Point, Simply Easy Learning
fileObject.read([count]);
File Positions:
The tell() method tells you the current position within the file in other words, the next read or
write will occur at that many bytes from the beginning of the file:
The seek(offset[, from]) method changes the current file position. The offset argument indicates
the number of bytes to be moved. The fromargument specifies the reference position from
where the bytes are to be moved.
If from is set to 0, it means use the beginning of the file as the reference position and 1 means
use the current position as the reference position and if it is set to 2 then the end of the file
would be taken as the reference position.
Renaming and Deleting Files:
Syntax:
os.rename(current_file_name, new_file_name)
The remove() Method:
Syntax:
os.delete(file_name)
Directories in Python:
The mkdir() Method:
You can use the mkdir() method of the os module to create directories in the current directory.
You need to supply an argument to this method, which contains the name of the directory to be
created.
Syntax:
os.mkdir("newdir")
The chdir() Method:
You can use the chdir() method to change the current directory. The chdir() method takes an
argument, which is the name of the directory that you want to make the current directory.
Syntax:
os.chdir("newdir")
The getcwd() Method:
The getcwd() method displays the current working directory.
Syntax:
19 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-19-320.jpg)
![Tutorials Point, Simply Easy Learning
The except clause with multiple exceptions:
You can also use the same except statement to handle multiple exceptions as follows:
try:
Do you operations here;
......................
except(Exception1[, Exception2[,...ExceptionN]]]):
If there is any exception from the given exception list,
then execute this block.
......................
else:
If there is no exception then execute this block.
Standard Exceptions:
Here is a list standard Exceptions available in Python: Standard Exceptions
The try-finally clause:
You can use a finally: block along with a try: block. The finally block is a place to put any code
that must execute, whether the try-block raised an exception or not. The syntax of the try-
finally statement is this:
try:
Do you operations here;
......................
Due to any exception, this may be skipped.
finally:
This would always be executed.
......................
Argument of an Exception:
An exception can have an argument, which is a value that gives additional information about the
problem. The contents of the argument vary by exception. You capture an exception's argument
by supplying a variable in the except clause as follows:
try:
Do you operations here;
......................
except ExceptionType, Argument:
You can print value of Argument here...
Raising an exceptions:
You can raise exceptions in several ways by using the raise statement. The general syntax for
the raise statement.
Syntax:
raise [Exception [, args [, traceback]]]
21 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-21-320.jpg)
![Tutorials Point, Simply Easy Learning
emp2.displayEmployee()
print "Total Employee %d" % Employee.empCount
Built-In Class Attributes:
Every Python class keeps following built-in attributes and they can be accessed using dot
operator like any other attribute:
__dict__ : Dictionary containing the class's namespace.
__doc__ : Class documentation string, or None if undefined.
__name__: Class name.
__module__: Module name in which the class is defined. This attribute is "__main__"
in interactive mode.
__bases__ : A possibly empty tuple containing the base classes, in the order of their
occurrence in the base class list.
Destroying Objects (Garbage Collection):
Python deletes unneeded objects (built-in types or class instances) automatically to free
memory space. The process by which Python periodically reclaims blocks of memory that no
longer are in use is termed garbage collection.
Python's garbage collector runs during program execution and is triggered when an object's
reference count reaches zero. An object's reference count changes as the number of aliases that
point to it changes:
An object's reference count increases when it's assigned a new name or placed in a container
(list, tuple, or dictionary). The object's reference count decreases when it's deleted with del, its
reference is reassigned, or its reference goes out of scope. When an object's reference count
reaches zero, Python collects it automatically.
Class Inheritance:
Instead of starting from scratch, you can create a class by deriving it from a preexisting class by
listing the parent class in parentheses after the new class name:
The child class inherits the attributes of its parent class, and you can use those attributes as if
they were defined in the child class. A child class can also override data members and methods
from the parent.
Syntax:
Derived classes are declared much like their parent class; however, a list of base classes to
inherit from are given after the class name:
class SubClassName (ParentClass1[, ParentClass2, ...]):
'Optional class documentation string'
class_suite
Overriding Methods:
You can always override your parent class methods. One reason for overriding parent's methods
is because you may want special or different functionality in your subclass.
23 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-23-320.jpg)
![Tutorials Point, Simply Easy Learning
class Parent: # define parent class
def myMethod(self):
print 'Calling parent method'
class Child(Parent): # define child class
def myMethod(self):
print 'Calling child method'
c = Child() # instance of child
c.myMethod() # child calls overridden method
Base Overloading Methods:
Following table lists some generic functionality that you can override in your own classes:
SN Method, Description & Sample Call
1 __init__ ( self [,args...] )
Constructor (with any optional arguments)
Sample Call : obj = className(args)
2 __del__( self )
Destructor, deletes an object
Sample Call : dell obj
3 __repr__( self )
Evaluatable string representation
Sample Call : repr(obj)
4 __str__( self )
Printable string representation
Sample Call : str(obj)
5 __cmp__ ( self, x )
Object comparison
Sample Call : cmp(obj, x)
Overloading Operators:
Suppose you've created a Vector class to represent two-dimensional vectors. What happens
when you use the plus operator to add them? Most likely Python will yell at you.
You could, however, define the __add__ method in your class to perform vector addition, and
then the plus operator would behave as per expectation:
#!/usr/bin/python
class Vector:
def __init__(self, a, b):
self.a = a
self.b = b
24 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-24-320.jpg)
![Tutorials Point, Simply Easy Learning
groups() This method return all matching subgroups in a tuple (empty if
there weren't any)
Matching vs Searching:
Python offers two different primitive operations based on regular expressions: match checks for
a match only at the beginning of the string, while search checks for a match anywhere in the
string (this is what Perl does by default).
Search and Replace:
Some of the most important re methods that use regular expressions is sub.
Syntax:
sub(pattern, repl, string, max=0)
This method replace all occurrences of the RE pattern in string with repl, substituting all
occurrences unless max provided. This method would return modified string.
Regular-expression Modifiers - Option Flags
Regular expression literals may include an optional modifier to control various aspects of
matching. The modifier are specified as an optional flag. You can provide multiple modified
using exclusive OR (|), as shown previously and may be represented by one of these:
Modifier Description
re.I Performs case-insensitive matching.
re.L Interprets words according to the current locale.This interpretation
affects the alphabetic group (w and W), as well as word boundary
behavior (b and B).
re.M Makes $ match the end of a line (not just the end of the string) and
makes ^ match the start of any line (not just the start of the string).
re.S Makes a period (dot) match any character, including a newline.
re.U Interprets letters according to the Unicode character set. This flag
affects the behavior of w, W, b, B.
re.X Permits "cuter" regular expression syntax. It ignores whitespace
(except inside a set [] or when escaped by a backslash), and treats
unescaped # as a comment marker.
Regular-expression patterns:
27 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-27-320.jpg)
![Tutorials Point, Simply Easy Learning
Except for control characters, (+ ? . * ^ $ ( ) [ ] { } | ), all characters match themselves.
You can escape a control character by preceding it with a backslash.
Following table lists the regular expression syntax that is available in Python.
Pattern Description
^ Matches beginning of line.
$ Matches end of line.
. Matches any single character except newline. Using m option allows it
to match newline as well.
[...] Matches any single character in brackets.
[^...] Matches any single character not in brackets
re* Matches 0 or more occurrences of preceding expression.
re+ Matches 0 or 1 occurrence of preceding expression.
re{ n} Matches exactly n number of occurrences of preceding expression.
re{ n,} Matches n or more occurrences of preceding expression.
re{ n, m} Matches at least n and at most m occurrences of preceding expression.
a| b Matches either a or b.
(re) Groups regular expressions and remembers matched text.
(?imx) Temporarily toggles on i, m, or x options within a regular expression. If
in parentheses, only that area is affected.
(?-imx) Temporarily toggles off i, m, or x options within a regular expression. If
in parentheses, only that area is affected.
(?: re) Groups regular expressions without remembering matched text.
(?imx: re) Temporarily toggles on i, m, or x options within parentheses.
(?-imx: re) Temporarily toggles off i, m, or x options within parentheses.
(?#...) Comment.
28 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-28-320.jpg)
![Tutorials Point, Simply Easy Learning
(?= re) Specifies position using a pattern. Doesn't have a range.
(?! re) Specifies position using pattern negation. Doesn't have a range.
(?> re) Matches independent pattern without backtracking.
w Matches word characters.
W Matches nonword characters.
s Matches whitespace. Equivalent to [tnrf].
S Matches nonwhitespace.
d Matches digits. Equivalent to [0-9].
D Matches nondigits.
A Matches beginning of string.
Z Matches end of string. If a newline exists, it matches just before
newline.
z Matches end of string.
G Matches point where last match finished.
b Matches word boundaries when outside brackets. Matches backspace
(0x08) when inside brackets.
B Matches nonword boundaries.
n, t, etc. Matches newlines, carriage returns, tabs, etc.
1...9 Matches nth grouped subexpression.
10 Matches nth grouped subexpression if it matched already. Otherwise
refers to the octal representation of a character code.
Regular-expression Examples:
Literal characters:
Example Description
29 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-29-320.jpg)
![Tutorials Point, Simply Easy Learning
python Match "python".
Character classes:
Example Description
[Pp]ython Match "Python" or "python"
rub[ye] Match "ruby" or "rube"
[aeiou] Match any one lowercase vowel
[0-9] Match any digit; same as [0123456789]
[a-z] Match any lowercase ASCII letter
[A-Z] Match any uppercase ASCII letter
[a-zA-Z0-9] Match any of the above
[^aeiou] Match anything other than a lowercase vowel
[^0-9] Match anything other than a digit
Special Character Classes:
Example Description
. Match any character except newline
d Match a digit: [0-9]
D Match a nondigit: [^0-9]
s Match a whitespace character: [ trnf]
S Match nonwhitespace: [^ trnf]
w Match a single word character: [A-Za-z0-9_]
W Match a nonword character: [^A-Za-z0-9_]
Repetition Cases:
30 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-30-320.jpg)
![Tutorials Point, Simply Easy Learning
Example Description
ruby? Match "rub" or "ruby": the y is optional
ruby* Match "rub" plus 0 or more ys
ruby+ Match "rub" plus 1 or more ys
d{3} Match exactly 3 digits
d{3,} Match 3 or more digits
d{3,5} Match 3, 4, or 5 digits
Nongreedy repetition:
This matches the smallest number of repetitions:
Example Description
<.*> Greedy repetition: matches "<python>perl>"
<.*?> Nongreedy: matches "<python>" in "<python>perl>"
Grouping with parentheses:
Example Description
Dd+ No group: + repeats d
(Dd)+ Grouped: + repeats Dd pair
([Pp]ython(, )?)+ Match "Python", "Python, python, python", etc.
Backreferences:
This matches a previously matched group again:
Example Description
([Pp])ython&1ails Match python&rails or Python&Rails
(['"])[^1]*1 Single or double-quoted string. 1 matches whatever the 1st group
31 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-31-320.jpg)
![Tutorials Point, Simply Easy Learning
Following code segment is another form of execute where you can pass parameters directly:
..................................
user_id = "test123"
password = "password"
con.execute('insert into Login values("%s", "%s")' %
(user_id, password))
..................................
READ Operation:
READ Operation on any databasse means to fetch some useful information from the database.
Once our database connection is established, we are ready to make a query into this database.
We can use either fetchone() method to fetch single record or fetchall method to fetech
multiple values from a database table.
fetchone(): This method fetches the next row of a query result set. A result set is an
object that is returned when a cursor object is used to query a table.
fetchall(): This method fetches all the rows in a result set. If some rows have already
been extracted from the result set, the fetchall() method retrieves the remaining rows
from the result set.
rowcount: This is a read-only attribute and returns the number of rows that were
affected by an execute() method.
Example:
Following is the procedure to query all the records from EMPLOYEE table having salary more
than 1000.
#!/usr/bin/python
import MySQLdb
# Open database connection
db = MySQLdb.connect("localhost","testuser","test123","TESTDB" )
# prepare a cursor object using cursor() method
cursor = db.cursor()
# Prepare SQL query to INSERT a record into the database.
sql = "SELECT * FROM EMPLOYEE
WHERE INCOME > '%d'" % (1000)
try:
# Execute the SQL command
cursor.execute(sql)
# Fetch all the rows in a list of lists.
results = cursor.fetchall()
for row in results:
fname = row[0]
lname = row[1]
age = row[2]
sex = row[3]
income = row[4]
# Now print fetched result
print "fname=%s,lname=%s,age=%d,sex=%s,income=%d" %
37 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-37-320.jpg)
![Tutorials Point, Simply Easy Learning
IntegrityError Subclass of DatabaseError for situations that would damage the relational
integrity, such as uniqueness constraints or foreign keys.
InternalError Subclass of DatabaseError that refers to errors internal to the database
module, such as a cursor no longer being active.
ProgrammingError Subclass of DatabaseError that refers to errors such as a bad table name
and other things that can safely be blamed on you.
NotSupportedError Subclass of DatabaseError that refers to trying to call unsupported
functionality.
Your Python scripts should handle these errors but before using any of the above exceptions,
make sure your MySQLdb has support for that exception. You can get more information about
them by reading the DB API 2.0 specification.
Sending Email using SMTP
Simple Mail Transfer Protocol (SMTP) is a protocol which handles sending e-mail and routing e-
mail between mail servers.
Python provides smtplib module which defines an SMTP client session object that can be used
to send mail to any Internet machine with an SMTP or ESMTP listener daemon.
Here is a simple syntax to create one SMTP object which can later be used to send an email:
import smtplib
smtpObj = smtplib.SMTP( [host [, port [, local_hostname]]] )
Here is the detail of the parameters:
host: This is the host running your SMTP server. You can specifiy IP address of the host
or a domain name like tutorialspoint.com. This is optional argument.
port: If you are providing host argument then you need to specifiy a port where SMTP
server is listening. Usually this port would be 25.
local_hostname: If your SMTP server is running on your local machine then you can
specify just localhost as of this option.
An SMTP object has an instance method called sendmail, which will typically be used to do the
work of mailing a message. It takes three parameters:
The sender - A string with the address of the sender.
The receivers - A list of strings, one for each recipient.
The message - A message as a string formatted as specified in the various RFCs.
Example:
Here is a simple way to send one email using Python script. Try it once:
41 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-41-320.jpg)
![Tutorials Point, Simply Easy Learning
#!/usr/bin/python
import smtplib
sender = 'from@fromdomain.com'
receivers = ['to@todomain.com']
message = """From: From Person <from@fromdomain.com>
To: To Person <to@todomain.com>
Subject: SMTP e-mail test
This is a test e-mail message.
"""
try:
smtpObj = smtplib.SMTP('localhost')
smtpObj.sendmail(sender, receivers, message)
print "Successfully sent email"
except SMTPException:
print "Error: unable to send email"
Here you have placed a basic e-mail in message, using a triple quote, taking care to format the
headers correctly. An e-mails requires a From, To, and Subject header, separated from the
body of the e-mail with a blank line.
To send the mail you use smtpObj to connect to the SMTP server on the local machine and then
use the sendmail method along with the message, the from address, and the destination
address as parameters (even though the from and to addresses are within the e-mail itself,
these aren't always used to route mail).
If you're not running an SMTP server on your local machine, you can use smtplib client to
communicate with a remote SMTP server. Unless you're using a webmail service (such as
Hotmail or Yahoo! Mail), your e-mail provider will have provided you with outgoing mail server
details that you can supply them, as follows:
smtplib.SMTP('mail.your-domain.com', 25)
Sending an HTML email using Python:
When you send a text message using Python then all the content will be treated as simple text.
Even if you will include HTML tags in a text message, it will be displayed as simple text and
HTML tags will not be formatted according to HTML syntax. But Python provides option to send
an HTML message as actual HTML message.
While sending an email message you can specify a Mime version, content type and character set
to send an HTML email.
Example:
Following is the example to send HTML content as an email. Try it once:
#!/usr/bin/python
import smtplib
message = """From: From Person <from@fromdomain.com>
To: To Person <to@todomain.com>
42 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-42-320.jpg)
![Tutorials Point, Simply Easy Learning
Content-Type: multipart/mixed; boundary=%s
--%s
""" % (marker, marker)
# Define the message action
part2 = """Content-Type: text/plain
Content-Transfer-Encoding:8bit
%s
--%s
""" % (body,marker)
# Define the attachment section
part3 = """Content-Type: multipart/mixed; name="%s"
Content-Transfer-Encoding:base64
Content-Disposition: attachment; filename=%s
%s
--%s--
""" %(filename, filename, encodedcontent, marker)
message = part1 + part2 + part3
try:
smtpObj = smtplib.SMTP('localhost')
smtpObj.sendmail(sender, reciever, message)
print "Successfully sent email"
except Exception:
print "Error: unable to send email"
Multithreaded Programming
Running several threads is similar to running several different programs concurrently, but with
the following benefits:
Multiple threads within a process share the same data space with the main thread and
can therefore share information or communicate with each other more easily than if
they were separate processes.
Threads sometimes called light-weight processes and they do not require much memory
overhead; theycare cheaper than processes.
A thread has a beginning, an execution sequence, and a conclusion. It has an instruction pointer
that keeps track of where within its context it is currently running.
It can be pre-empted (interrupted)
It can temporarily be put on hold (also known as sleeping) while other threads are
running - this is called yielding.
Starting a New Thread:
To spawn another thread, you need to call following method available in thread module:
thread.start_new_thread ( function, args[, kwargs] )
This method call enables a fast and efficient way to create new threads in both Linux and
Windows.
44 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-44-320.jpg)
![Tutorials Point, Simply Easy Learning
threading.enumerate(): Returns a list of all thread objects that are currently active.
In addition to the methods, the threading module has the Thread class that implements
threading. The methods provided by the Thread class are as follows:
run(): The run() method is the entry point for a thread.
start(): The start() method starts a thread by calling the run method.
join([time]): The join() waits for threads to terminate.
isAlive(): The isAlive() method checks whether a thread is still executing.
getName(): The getName() method returns the name of a thread.
setName(): The setName() method sets the name of a thread.
Creating Thread using Threading Module:
To implement a new thread using the threading module, you have to do the following:
Define a new subclass of the Thread class.
Override the __init__(self [,args]) method to add additional arguments.
Then override the run(self [,args]) method to implement what the thread should do
when started.
Once you have created the new Thread subclass, you can create an instance of it and then start
a new thread by invoking the start() or run() methods.
Example:
#!/usr/bin/python
import threading
import time
exitFlag = 0
class myThread (threading.Thread):
def __init__(self, threadID, name, counter):
self.threadID = threadID
self.name = name
self.counter = counter
threading.Thread.__init__(self)
def run(self):
print "Starting " + self.name
print_time(self.name, self.counter, 5)
print "Exiting " + self.name
def print_time(threadName, delay, counter):
while counter:
if exitFlag:
thread.exit()
time.sleep(delay)
print "%s: %s" % (threadName, time.ctime(time.time()))
counter -= 1
# Create new threads
thread1 = myThread(1, "Thread-1", 1)
thread2 = myThread(2, "Thread-2", 2)
# Start new Threads
thread1.start()
46 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-46-320.jpg)
![Tutorials Point, Simply Easy Learning
print "Starting " + self.name
# Get lock to synchronize threads
threadLock.acquire()
print_time(self.name, self.counter, 3)
# Free lock to release next thread
threadLock.release()
def print_time(threadName, delay, counter):
while counter:
time.sleep(delay)
print "%s: %s" % (threadName, time.ctime(time.time()))
counter -= 1
threadLock = threading.Lock()
threads = []
# Create new threads
thread1 = myThread(1, "Thread-1", 1)
thread2 = myThread(2, "Thread-2", 2)
# Start new Threads
thread1.start()
thread2.start()
# Add threads to thread list
threads.append(thread1)
threads.append(thread2)
# Wait for all threads to complete
for t in threads:
t.join()
print "Exiting Main Thread"
This would produce following result:
Starting Thread-1
Starting Thread-2
Thread01: Thu Jan 22 16:04:38 2009
Thread01: Thu Jan 22 16:04:39 2009
Thread01: Thu Jan 22 16:04:40 2009
Thread02: Thu Jan 22 16:04:42 2009
Thread02: Thu Jan 22 16:04:44 2009
Thread02: Thu Jan 22 16:04:46 2009
Exiting Main Thread
Multithreaded Priority Queue:
The Queue module allows you to create a new queue object that can hold a specific number of
items. There are following methods to control the Queue:
get(): The get() removes and returns an item from the queue.
put(): The put adds item to a queue.
qsize() : The qsize() returns the number of items that are currently in the queue.
empty(): The empty( ) returns True if queue is empty; otherwise, False.
full(): the full() returns True if queue is full; otherwise, False.
Example:
48 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-48-320.jpg)
![Tutorials Point, Simply Easy Learning
#!/usr/bin/python
import Queue
import threading
import time
exitFlag = 0
class myThread (threading.Thread):
def __init__(self, threadID, name, q):
self.threadID = threadID
self.name = name
self.q = q
threading.Thread.__init__(self)
def run(self):
print "Starting " + self.name
process_data(self.name, self.q)
print "Exiting " + self.name
def process_data(threadName, q):
while not exitFlag:
queueLock.acquire()
if not workQueue.empty():
data = q.get()
queueLock.release()
print "%s processing %s" % (threadName, data)
else:
queueLock.release()
time.sleep(1)
threadList = ["Thread-1", "Thread-2", "Thread-3"]
nameList = ["One", "Two", "Three", "Four", "Five"]
queueLock = threading.Lock()
workQueue = Queue.Queue(10)
threads = []
threadID = 1
# Create new threads
for tName in threadList:
thread = myThread(threadID, tName, workQueue)
thread.start()
threads.append(thread)
threadID += 1
# Fill the queue
queueLock.acquire()
for word in nameList:
workQueue.put(word)
queueLock.release()
# Wait for queue to empty
while not workQueue.empty():
pass
# Notify threads it's time to exit
exitFlag = 1
# Wait for all threads to complete
for t in threads:
t.join()
print "Exiting Main Thread"
49 | P a g e](https://image.slidesharecdn.com/pythontutorial-13428892653671-phpapp01-120721115003-phpapp01/85/Python-Tutorial-49-320.jpg)
Python Tutorial
- 1. Tutorials Point, Simply Easy Learning Python Tutorial Tutorialspoint.com Python is a general purpose interpreted, interactive, object-oriented and high-level programming language. Python was created by Guido van Rossum in the late eighties and early nineties. Like Perl, Python source code is now available under the GNU General Public License (GPL). This tutorial gives an initial push to start you with Python. For more detail kindly check tutorialspoint.com/python Python Overview: Python is a high-level, interpreted, interactive and object oriented-scripting language. Python is Interpreted Python is Interactive Python is Object-Oriented Python is Beginner's Language Python was developed by Guido van Rossum in the late eighties and early nineties at the National Research Institute for Mathematics and Computer Science in the Netherlands. Python's feature highlights include: Easy-to-learn Easy-to-read Easy-to-maintain A broad standard library Interactive Mode Portable Extendable Databases GUI Programming Scalable Getting Python: The most up-to-date and current source code, binaries, documentation, news, etc. is available at the official website of Python: Python Official Website : http://www.python.org/ You can download the Python documentation from the following site. The documentation is available in HTML, PDF, and PostScript formats. Python Documentation Website : www.python.org/doc/ First Python Program: Interactive Mode Programming: 1|Page
- 2. Tutorials Point, Simply Easy Learning Invoking the interpreter without passing a script file as a parameter brings up the following prompt: root# python Python 2.5 (r25:51908, Nov 6 2007, 16:54:01) [GCC 4.1.2 20070925 (Red Hat 4.1.2-27)] on linux2 Type "help", "copyright", "credits" or "license" for more info. >>> Type the following text to the right of the Python prompt and press the Enter key: >>> print "Hello, Python!"; This will produce following result: Hello, Python! Python Identifiers: A Python identifier is a name used to identify a variable, function, class, module, or other object. An identifier starts with a letter A to Z or a to z or an underscore (_) followed by zero or more letters, underscores, and digits (0 to 9). Python does not allow punctuation characters such as @, $, and % within identifiers. Python is a case sensitive programming language. Thus Manpower and manpower are two different identifiers in Python. Here are following identifier naming convention for Python: Class names start with an uppercase letter and all other identifiers with a lowercase letter. Starting an identifier with a single leading underscore indicates by convention that the identifier is meant to be private. Starting an identifier with two leading underscores indicates a strongly private identifier. If the identifier also ends with two trailing underscores, the identifier is a language- defined special name. Reserved Words: The following list shows the reserved words in Python. These reserved words may not be used as constant or variable or any other identifier names. Keywords contain lowercase letters only. and exec not assert finally or break for pass 2|Page
- 3. Tutorials Point, Simply Easy Learning class from print continue global raise def if return del import try elif in while else is with except lambda yield Lines and Indentation: One of the first caveats programmers encounter when learning Python is the fact that there are no braces to indicate blocks of code for class and function definitions or flow control. Blocks of code are denoted by line indentation, which is rigidly enforced. The number of spaces in the indentation is variable, but all statements within the block must be indented the same amount. Both blocks in this example are fine: if True: print "True" else: print "False" However, the second block in this example will generate an error: if True: print "Answer" print "True" else: print "Answer" print "False" Multi-Line Statements: Statements in Python typically end with a new line. Python does, however, allow the use of the line continuation character () to denote that the line should continue. For example: total = item_one + item_two + item_three Statements contained within the [], {}, or () brackets do not need to use the line continuation character. For example: 3|Page
- 4. Tutorials Point, Simply Easy Learning days = ['Monday', 'Tuesday', 'Wednesday', 'Thursday', 'Friday'] Quotation in Python: Python accepts single ('), double (") and triple (''' or """) quotes to denote string literals, as long as the same type of quote starts and ends the string. The triple quotes can be used to span the string across multiple lines. For example, all the following are legal: word = 'word' sentence = "This is a sentence." paragraph = """This is a paragraph. It is made up of multiple lines and sentences.""" Comments in Python: A hash sign (#) that is not inside a string literal begins a comment. All characters after the # and up to the physical line end are part of the comment, and the Python interpreter ignores them. #!/usr/bin/python # First comment print "Hello, Python!"; # second comment This will produce following result: Hello, Python! A comment may be on the same line after a statement or expression: name = "Madisetti" # This is again comment You can comment multiple lines as follows: # This is a comment. # This is a comment, too. # This is a comment, too. # I said that already. Using Blank Lines: A line containing only whitespace, possibly with a comment, is known as a blank line, and Python totally ignores it. In an interactive interpreter session, you must enter an empty physical line to terminate a multiline statement. Multiple Statements on a Single Line: 4|Page
- 5. Tutorials Point, Simply Easy Learning The semicolon ( ; ) allows multiple statements on the single line given that neither statement starts a new code block. Here is a sample snip using the semicolon: import sys; x = 'foo'; sys.stdout.write(x + 'n') Multiple Statement Groups as Suites: Groups of individual statements making up a single code block are called suites in Python. Compound or complex statements, such as if, while, def, and class, are those which require a header line and a suite. Header lines begin the statement (with the keyword) and terminate with a colon ( : ) and are followed by one or more lines which make up the suite. Example: if expression : suite elif expression : suite else : suite Python - Variable Types: Variables are nothing but reserved memory locations to store values. This means that when you create a variable you reserve some space in memory. Based on the data type of a variable, the interpreter allocates memory and decides what can be stored in the reserved memory. Therefore, by assigning different data types to variables, you can store integers, decimals, or characters in these variables. Assigning Values to Variables: The operand to the left of the = operator is the name of the variable, and the operand to the right of the = operator is the value stored in the variable. For example: counter = 100 # An integer assignment miles = 1000.0 # A floating point name = "John" # A string print counter print miles print name Standard Data Types: Python has five standard data types: Numbers String List Tuple 5|Page
- 6. Tutorials Point, Simply Easy Learning Dictionary Python Numbers: Number objects are created when you assign a value to them. For example: var1 = 1 var2 = 10 Python supports four different numerical types: int (signed integers) long (long integers [can also be represented in octal and hexadecimal]) float (floating point real values) complex (complex numbers) Here are some examples of numbers: int long float complex 10 51924361L 0.0 3.14j 100 -0x19323L 15.20 45.j -786 0122L -21.9 9.322e-36j 080 0xDEFABCECBDAECBFBAEl 32.3+e18 .876j -0490 535633629843L -90. -.6545+0J -0x260 -052318172735L -32.54e100 3e+26J 0x69 -4721885298529L 70.2-E12 4.53e-7j Python Strings: Strings in Python are identified as a contiguous set of characters in between quotation marks. Example: str = 'Hello World!' print str # Prints complete string print str[0] # Prints first character of the string print str[2:5] # Prints characters starting from 3rd to 6th print str[2:] # Prints string starting from 3rd character print str * 2 # Prints string two times print str + "TEST" # Prints concatenated string 6|Page
- 7. Tutorials Point, Simply Easy Learning Python Lists: Lists are the most versatile of Python's compound data types. A list contains items separated by commas and enclosed within square brackets ([]). #!/usr/bin/python list = [ 'abcd', 786 , 2.23, 'john', 70.2 ] tinylist = [123, 'john'] print list # Prints complete list print list[0] # Prints first element of the list print list[1:3] # Prints elements starting from 2nd to 4th print list[2:] # Prints elements starting from 3rd element print tinylist * 2 # Prints list two times print list + tinylist # Prints concatenated lists Python Tuples: A tuple is another sequence data type that is similar to the list. A tuple consists of a number of values separated by commas. Unlike lists, however, tuples are enclosed within parentheses. Tuples can be thought of as read-only lists. tuple = ( 'abcd', 786 , 2.23, 'john', 70.2 ) tinytuple = (123, 'john') print tuple # Prints complete list print tuple[0] # Prints first element of the list print tuple[1:3] # Prints elements starting from 2nd to 4th print tuple[2:] # Prints elements starting from 3rd element print tinytuple * 2 # Prints list two times print tuple + tinytuple # Prints concatenated lists Python Dictionary: Python 's dictionaries are hash table type. They work like associative arrays or hashes found in Perl and consist of key-value pairs. tinydict = {'name': 'john','code':6734, 'dept': 'sales'} print dict['one'] # Prints value for 'one' key print dict[2] # Prints value for 2 key print tinydict # Prints complete dictionary print tinydict.keys() # Prints all the keys print tinydict.values() # Prints all the values Python - Basic Operators: Operator Description Example + Addition - Adds values on either side of a + b will give 30 the operator 7|Page
- 8. Tutorials Point, Simply Easy Learning - Subtraction - Subtracts right hand a - b will give -10 operand from left hand operand * Multiplication - Multiplies values on either a * b will give 200 side of the operator / Division - Divides left hand operand by b / a will give 2 right hand operand % Modulus - Divides left hand operand by b % a will give 0 right hand operand and returns remainder ** Exponent - Performs exponential (power) a**b will give 10 to the power 20 calculation on operators // Floor Division - The division of operands 9//2 is equal to 4 and 9.0//2.0 is equal where the result is the quotient in which to 4.0 the digits after the decimal point are removed. == Checks if the value of two operands are (a == b) is not true. equal or not, if yes then condition becomes true. != Checks if the value of two operands are (a != b) is true. equal or not, if values are not equal then condition becomes true. <> Checks if the value of two operands are (a <> b) is true. This is similar to != equal or not, if values are not equal then operator. condition becomes true. > Checks if the value of left operand is (a > b) is not true. greater than the value of right operand, if yes then condition becomes true. < Checks if the value of left operand is less (a < b) is true. than the value of right operand, if yes then condition becomes true. >= Checks if the value of left operand is (a >= b) is not true. greater than or equal to the value of right operand, if yes then condition becomes true. <= Checks if the value of left operand is less (a <= b) is true. than or equal to the value of right operand, if yes then condition becomes 8|Page
- 9. Tutorials Point, Simply Easy Learning true. = Simple assignment operator, Assigns c = a + b will assigne value of a + b into values from right side operands to left c side operand += Add AND assignment operator, It adds c += a is equivalent to c = c + a right operand to the left operand and assign the result to left operand -= Subtract AND assignment operator, It c -= a is equivalent to c = c - a subtracts right operand from the left operand and assign the result to left operand *= Multiply AND assignment operator, It c *= a is equivalent to c = c * a multiplies right operand with the left operand and assign the result to left operand /= Divide AND assignment operator, It c /= a is equivalent to c = c / a divides left operand with the right operand and assign the result to left operand %= Modulus AND assignment operator, It c %= a is equivalent to c = c % a takes modulus using two operands and assign the result to left operand **= Exponent AND assignment operator, c **= a is equivalent to c = c ** a Performs exponential (power) calculation on operators and assign value to the left operand //= Floor Dividion and assigns a value, c //= a is equivalent to c = c // a Performs floor division on operators and assign value to the left operand & Binary AND Operator copies a bit to the (a & b) will give 12 which is 0000 1100 result if it exists in both operands. | Binary OR Operator copies a bit if it (a | b) will give 61 which is 0011 1101 exists in eather operand. ^ Binary XOR Operator copies the bit if it is (a ^ b) will give 49 which is 0011 0001 set in one operand but not both. ~ Binary Ones Complement Operator is (~a ) will give -60 which is 1100 0011 9|Page
- 10. Tutorials Point, Simply Easy Learning unary and has the efect of 'flipping' bits. << Binary Left Shift Operator. The left a << 2 will give 240 which is 1111 0000 operands value is moved left by the number of bits specified by the right operand. >> Binary Right Shift Operator. The left a >> 2 will give 15 which is 0000 1111 operands value is moved right by the number of bits specified by the right operand. and Called Logical AND operator. If both the (a and b) is true. operands are true then then condition becomes true. or Called Logical OR Operator. If any of the (a or b) is true. two operands are non zero then then condition becomes true. not Called Logical NOT Operator. Use to not(a && b) is false. reverses the logical state of its operand. If a condition is true then Logical NOT operator will make false. in Evaluates to true if it finds a variable in x in y, here in results in a 1 if x is a the specified sequence and false member of sequence y. otherwise. not in Evaluates to true if it finds a variable in x not in y, here not in results in a 1 if x the specified sequence and false is a member of sequence y. otherwise. is Evaluates to true if the variables on x is y, here is results in 1 if id(x) equals either side of the operator point to the id(y). same object and false otherwise. is not Evaluates to false if the variables on x is not y, here is not results in 1 if id(x) either side of the operator point to the is not equal to id(y). same object and true otherwise. Python Operators Precedence The following table lists all operators from highest precedence to lowest. Operator Description 10 | P a g e
- 11. Tutorials Point, Simply Easy Learning ** Exponentiation (raise to the power) ~+- Ccomplement, unary plus and minus (method names for the last two are +@ and -@) * / % // Multiply, divide, modulo and floor division +- Addition and subtraction >> << Right and left bitwise shift & Bitwise 'AND' ^| Bitwise exclusive `OR' and regular `OR' <= < > >= Comparison operators <> == != Equality operators = %= /= //= -= += |= &= >>= Assignment operators <<= *= **= is is not Identity operators in not in Membership operators note or and Logical operators The if statement: The syntax of the if statement is: if expression: statement(s) The else Statement: The syntax of the if...else statement is: if expression: statement(s) else: statement(s) The elif Statement 11 | P a g e
- 12. Tutorials Point, Simply Easy Learning The syntax of the if...elif statement is: if expression1: statement(s) elif expression2: statement(s) elif expression3: statement(s) else: statement(s) This will produce following result: 3 - Got a true expression value 100 Good bye! The Nested if...elif...else Construct The syntax of the nested if...elif...else construct may be: if expression1: statement(s) if expression2: statement(s) elif expression3: statement(s) else statement(s) elif expression4: statement(s) else: statement(s) The while Loop: The syntax of the while look is: while expression: statement(s) The Infinite Loops: You must use caution when using while loops because of the possibility that this condition never resolves to a false value. This results in a loop that never ends. Such a loop is called an infinite loop. An infinite loop might be useful in client/server programming where the server needs to run continuously so that client programs can communicate with it as and when required. Single Statement Suites: 12 | P a g e
- 13. Tutorials Point, Simply Easy Learning Similar to the if statement syntax, if your while clause consists only of a single statement, it may be placed on the same line as the while header. Here is an example of a one-line while clause: while expression : statement The for Loop: The syntax of the loop look is: for iterating_var in sequence: statements(s) Iterating by Sequence Index: An alternative way of iterating through each item is by index offset into the sequence itself: fruits = ['banana', 'apple', 'mango'] for index in range(len(fruits)): print 'Current fruit :', fruits[index] print "Good bye!" The break Statement: The break statement in Python terminates the current loop and resumes execution at the next statement, just like the traditional break found in C. The most common use for break is when some external condition is triggered requiring a hasty exit from a loop. The break statement can be used in both while and for loops. for letter in 'Python': # First Example if letter == 'h': break print 'Current Letter :', letter var = 10 # Second Example while var > 0: print 'Current variable value :', var var = var -1 if var == 5: break print "Good bye!" The continue Statement: The continue statement in Python returns the control to the beginning of the while loop. The continue statement rejects all the remaining statements in the current iteration of the loop and moves the control back to the top of the loop. The continue statement can be used in both while and for loops. 13 | P a g e
- 14. Tutorials Point, Simply Easy Learning for letter in 'Python': # First Example if letter == 'h': continue print 'Current Letter :', letter var = 10 # Second Example while var > 0: print 'Current variable value :', var var = var -1 if var == 5: continue print "Good bye!" The else Statement Used with Loops Python supports to have an else statement associated with a loop statements. If the else statement is used with a for loop, the else statement is executed when the loop has exhausted iterating the list. If the else statement is used with a while loop, the else statement is executed when the condition becomes false. The pass Statement: The pass statement in Python is used when a statement is required syntactically but you do not want any command or code to execute. The pass statement is a null operation; nothing happens when it executes. The pass is also useful in places where your code will eventually go, but has not been written yet (e.g., in stubs for example): #!/usr/bin/python for letter in 'Python': if letter == 'h': pass print 'This is pass block' print 'Current Letter :', letter print "Good bye!" Defining a Function You can define functions to provide the required functionality. Here are simple rules to define a function in Python: Function blocks begin with the keyword def followed by the function name and parentheses ( ( ) ). Any input parameters or arguments should be placed within these parentheses. You can also define parameters inside these parentheses. The first statement of a function can be an optional statement - the documentation string of the function or docstring. The code block within every function starts with a colon (:) and is indented. 14 | P a g e
- 15. Tutorials Point, Simply Easy Learning The statement return [expression] exits a function, optionally passing back an expression to the caller. A return statement with no arguments is the same as return None. Syntax: def functionname( parameters ): "function_docstring" function_suite return [expression] By default, parameters have a positional behavior, and you need to inform them in the same order that they were defined. Example: Here is the simplest form of a Python function. This function takes a string as input parameter and prints it on standard screen. def printme( str ): "This prints a passed string into this function" print str return Calling a Function Defining a function only gives it a name, specifies the parameters that are to be included in the function, and structures the blocks of code. Once the basic structure of a function is finalized, you can execute it by calling it from another function or directly from the Python prompt. Following is the example to call printme() function: #!/usr/bin/python # Function definition is here def printme( str ): "This prints a passed string into this function" print str; return; # Now you can call printme function printme("I'm first call to user defined function!"); printme("Again second call to the same function"); This would produce following result: I'm first call to user defined function! Again second call to the same function Python - Modules: 15 | P a g e
- 16. Tutorials Point, Simply Easy Learning A module allows you to logically organize your Python code. Grouping related code into a module makes the code easier to understand and use. A module is a Python object with arbitrarily named attributes that you can bind and reference. Simply, a module is a file consisting of Python code. A module can define functions, classes, and variables. A module can also include runnable code. Example: The Python code for a module named aname normally resides in a file named aname.py. Here's an example of a simple module, hello.py def print_func( par ): print "Hello : ", par return The import Statement: You can use any Python source file as a module by executing an import statement in some other Python source file. import has the following syntax: import module1[, module2[,... moduleN] When the interpreter encounters an import statement, it imports the module if the module is present in the search path. Asearch path is a list of directories that the interpreter searches before importing a module. Example: To import the module hello.py, you need to put the following command at the top of the script: #!/usr/bin/python # Import module hello import hello # Now you can call defined function that module as follows hellp.print_func("Zara") This would produce following result: Hello : Zara A module is loaded only once, regardless of the number of times it is imported. This prevents the module execution from happening over and over again if multiple imports occur. Opening and Closing Files: The open Function: 16 | P a g e
- 17. Tutorials Point, Simply Easy Learning Before you can read or write a file, you have to open it using Python's built-in open() function. This function creates a file object which would be utilized to call other support methods associated with it. Syntax: file object = open(file_name [, access_mode][, buffering]) Here is paramters detail: file_name: The file_name argument is a string value that contains the name of the file that you want to access. access_mode: The access_mode determines the mode in which the file has to be opened ie. read, write append etc. A complete list of possible values is given below in the table. This is optional parameter and the default file access mode is read (r) buffering: If the buffering value is set to 0, no buffering will take place. If the buffering value is 1, line buffering will be performed while accessing a file. If you specify the buffering value as an integer greater than 1, then buffering action will be performed with the indicated buffer size. This is optional paramter. Here is a list of the different modes of opening a file: Modes Description r Opens a file for reading only. The file pointer is placed at the beginning of the file. This is the default mode. rb Opens a file for reading only in binary format. The file pointer is placed at the beginning of the file. This is the default mode. r+ Opens a file for both reading and writing. The file pointer will be at the beginning of the file. rb+ Opens a file for both reading and writing in binary format. The file pointer will be at the beginning of the file. w Opens a file for writing only. Overwrites the file if the file exists. If the file does not exist, creates a new file for writing. wb Opens a file for writing only in binary format. Overwrites the file if the file exists. If the file does not exist, creates a new file for writing. w+ Opens a file for both writing and reading. Overwrites the existing file if the file exists. If the file does not exist, creates a new file for reading and writing. wb+ Opens a file for both writing and reading in binary format. Overwrites the existing file if the file exists. If the file does not exist, creates a new file for reading and writing. a Opens a file for appending. The file pointer is at the end of the file if the file exists. That is, the file is in the append mode. If the file does not exist, it creates a new file for 17 | P a g e
- 18. Tutorials Point, Simply Easy Learning writing. ab Opens a file for appending in binary format. The file pointer is at the end of the file if the file exists. That is, the file is in the append mode. If the file does not exist, it creates a new file for writing. a+ Opens a file for both appending and reading. The file pointer is at the end of the file if the file exists. The file opens in the append mode. If the file does not exist, it creates a new file for reading and writing. ab+ Opens a file for both appending and reading in binary format. The file pointer is at the end of the file if the file exists. The file opens in the append mode. If the file does not exist, it creates a new file for reading and writing. The file object atrributes: Once a file is opened and you have one file object, you can get various information related to that file. Here is a list of all attributes related to file object: Attribute Description file.closed Returns true if file is closed, false otherwise. file.mode Returns access mode with which file was opened. file.name Returns name of the file. file.softspace Returns false if space explicitly required with print, true otherwise. The close() Method: The close() method of a file object flushes any unwritten information and closes the file object, after which no more writing can be done. fileObject.close(); Reading and Writing Files: The write() Method: Syntax: fileObject.write(string); The read() Method: Syntax: 18 | P a g e
- 19. Tutorials Point, Simply Easy Learning fileObject.read([count]); File Positions: The tell() method tells you the current position within the file in other words, the next read or write will occur at that many bytes from the beginning of the file: The seek(offset[, from]) method changes the current file position. The offset argument indicates the number of bytes to be moved. The fromargument specifies the reference position from where the bytes are to be moved. If from is set to 0, it means use the beginning of the file as the reference position and 1 means use the current position as the reference position and if it is set to 2 then the end of the file would be taken as the reference position. Renaming and Deleting Files: Syntax: os.rename(current_file_name, new_file_name) The remove() Method: Syntax: os.delete(file_name) Directories in Python: The mkdir() Method: You can use the mkdir() method of the os module to create directories in the current directory. You need to supply an argument to this method, which contains the name of the directory to be created. Syntax: os.mkdir("newdir") The chdir() Method: You can use the chdir() method to change the current directory. The chdir() method takes an argument, which is the name of the directory that you want to make the current directory. Syntax: os.chdir("newdir") The getcwd() Method: The getcwd() method displays the current working directory. Syntax: 19 | P a g e
- 20. Tutorials Point, Simply Easy Learning os.getcwd() The rmdir() Method: The rmdir() method deletes the directory, which is passed as an argument in the method. Before removing a directory, all the contents in it should be removed. Syntax: os.rmdir('dirname') Handling an exception: If you have some suspicious code that may raise an exception, you can defend your program by placing the suspicious code in a try: block. After the try: block, include an except: statement, followed by a block of code which handles the problem as elegantly as possible. Syntax: Here is simple syntax of try....except...else blocks: try: Do you operations here; ...................... except ExceptionI: If there is ExceptionI, then execute this block. except ExceptionII: If there is ExceptionII, then execute this block. ...................... else: If there is no exception then execute this block. Here are few important points above the above mentioned syntax: A single try statement can have multiple except statements. This is useful when the try block contains statements that may throw different types of exceptions. You can also provide a generic except clause, which handles any exception. After the except clause(s), you can include an else-clause. The code in the else-block executes if the code in the try: block does not raise an exception. The else-block is a good place for code that does not need the try: block's protection. The except clause with no exceptions: You can also use the except statement with no exceptions defined as follows: try: Do you operations here; ...................... except: If there is any exception, then execute this block. ...................... else: If there is no exception then execute this block. 20 | P a g e
- 21. Tutorials Point, Simply Easy Learning The except clause with multiple exceptions: You can also use the same except statement to handle multiple exceptions as follows: try: Do you operations here; ...................... except(Exception1[, Exception2[,...ExceptionN]]]): If there is any exception from the given exception list, then execute this block. ...................... else: If there is no exception then execute this block. Standard Exceptions: Here is a list standard Exceptions available in Python: Standard Exceptions The try-finally clause: You can use a finally: block along with a try: block. The finally block is a place to put any code that must execute, whether the try-block raised an exception or not. The syntax of the try- finally statement is this: try: Do you operations here; ...................... Due to any exception, this may be skipped. finally: This would always be executed. ...................... Argument of an Exception: An exception can have an argument, which is a value that gives additional information about the problem. The contents of the argument vary by exception. You capture an exception's argument by supplying a variable in the except clause as follows: try: Do you operations here; ...................... except ExceptionType, Argument: You can print value of Argument here... Raising an exceptions: You can raise exceptions in several ways by using the raise statement. The general syntax for the raise statement. Syntax: raise [Exception [, args [, traceback]]] 21 | P a g e
- 22. Tutorials Point, Simply Easy Learning User-Defined Exceptions: Python also allows you to create your own exceptions by deriving classes from the standard built-in exceptions. Here is an example related to RuntimeError. Here a class is created that is subclassed from RuntimeError. This is useful when you need to display more specific information when an exception is caught. In the try block, the user-defined exception is raised and caught in the except block. The variable e is used to create an instance of the class Networkerror. class Networkerror(RuntimeError): def __init__(self, arg): self.args = arg So once you defined above class, you can raise your exception as follows: try: raise Networkerror("Bad hostname") except Networkerror,e: print e.args Creating Classes: The class statement creates a new class definition. The name of the class immediately follows the keyword class followed by a colon as follows: class ClassName: 'Optional class documentation string' class_suite The class has a documentation string which can be access via ClassName.__doc__. The class_suite consists of all the component statements, defining class members, data attributes, and functions. Creating instance objects: To create instances of a class, you call the class using class name and pass in whatever arguments its __init__ method accepts. "This would create first object of Employee class" emp1 = Employee("Zara", 2000) "This would create second object of Employee class" emp2 = Employee("Manni", 5000) Accessing attributes: You access the object's attributes using the dot operator with object. Class variable would be accessed using class name as follows: emp1.displayEmployee() 22 | P a g e
- 23. Tutorials Point, Simply Easy Learning emp2.displayEmployee() print "Total Employee %d" % Employee.empCount Built-In Class Attributes: Every Python class keeps following built-in attributes and they can be accessed using dot operator like any other attribute: __dict__ : Dictionary containing the class's namespace. __doc__ : Class documentation string, or None if undefined. __name__: Class name. __module__: Module name in which the class is defined. This attribute is "__main__" in interactive mode. __bases__ : A possibly empty tuple containing the base classes, in the order of their occurrence in the base class list. Destroying Objects (Garbage Collection): Python deletes unneeded objects (built-in types or class instances) automatically to free memory space. The process by which Python periodically reclaims blocks of memory that no longer are in use is termed garbage collection. Python's garbage collector runs during program execution and is triggered when an object's reference count reaches zero. An object's reference count changes as the number of aliases that point to it changes: An object's reference count increases when it's assigned a new name or placed in a container (list, tuple, or dictionary). The object's reference count decreases when it's deleted with del, its reference is reassigned, or its reference goes out of scope. When an object's reference count reaches zero, Python collects it automatically. Class Inheritance: Instead of starting from scratch, you can create a class by deriving it from a preexisting class by listing the parent class in parentheses after the new class name: The child class inherits the attributes of its parent class, and you can use those attributes as if they were defined in the child class. A child class can also override data members and methods from the parent. Syntax: Derived classes are declared much like their parent class; however, a list of base classes to inherit from are given after the class name: class SubClassName (ParentClass1[, ParentClass2, ...]): 'Optional class documentation string' class_suite Overriding Methods: You can always override your parent class methods. One reason for overriding parent's methods is because you may want special or different functionality in your subclass. 23 | P a g e
- 24. Tutorials Point, Simply Easy Learning class Parent: # define parent class def myMethod(self): print 'Calling parent method' class Child(Parent): # define child class def myMethod(self): print 'Calling child method' c = Child() # instance of child c.myMethod() # child calls overridden method Base Overloading Methods: Following table lists some generic functionality that you can override in your own classes: SN Method, Description & Sample Call 1 __init__ ( self [,args...] ) Constructor (with any optional arguments) Sample Call : obj = className(args) 2 __del__( self ) Destructor, deletes an object Sample Call : dell obj 3 __repr__( self ) Evaluatable string representation Sample Call : repr(obj) 4 __str__( self ) Printable string representation Sample Call : str(obj) 5 __cmp__ ( self, x ) Object comparison Sample Call : cmp(obj, x) Overloading Operators: Suppose you've created a Vector class to represent two-dimensional vectors. What happens when you use the plus operator to add them? Most likely Python will yell at you. You could, however, define the __add__ method in your class to perform vector addition, and then the plus operator would behave as per expectation: #!/usr/bin/python class Vector: def __init__(self, a, b): self.a = a self.b = b 24 | P a g e
- 25. Tutorials Point, Simply Easy Learning def __str__(self): return 'Vector (%d, %d)' % (self.a, self.b) def __add__(self,other): return Vector(self.a + other.a, self.b + other.b) v1 = Vector(2,10) v2 = Vector(5,-2) print v1 + v2 Data Hiding: An object's attributes may or may not be visible outside the class definition. For these cases, you can name attributes with a double underscore prefix, and those attributes will not be directly visible to outsiders: #!/usr/bin/python class JustCounter: __secretCount = 0 def count(self): self.__secretCount += 1 print self.__secretCount counter = JustCounter() counter.count() counter.count() print counter.__secretCount A regular expression is a special sequence of characters that helps you match or find other strings or sets of strings, using a specialized syntax held in a pattern. Regular expressions are widely used in UNIX world. The module re provides full support for Perl-like regular expressions in Python. The re module raises the exception re.error if an error occurs while compiling or using a regular expression. We would cover two important functions which would be used to handle regular expressions. But a small thing first: There are various characters which would have special meaning when they are used in regular expression. To avoid any confusion while dealing with regular expressions we would use Raw Strings as r'expression'. The match Function This function attempts to match RE pattern to string with optional flags. Here is the syntax for this function: re.match(pattern, string, flags=0) Here is the description of the parameters: Parameter Description 25 | P a g e
- 26. Tutorials Point, Simply Easy Learning pattern This is the regular expression to be matched. string This is the string which would be searched to match the pattern flags You can specifiy different flags using exclusive OR (|). These are modifiers which are listed in the table below. The re.match function returns a match object on success, None on failure. We would use group(num) or groups() function of match object to get matched expression. Match Object Methods Description group(num=0) This methods returns entire match (or specific subgroup num) groups() This method return all matching subgroups in a tuple (empty if there weren't any) The search Function This function search for first occurrence of RE pattern within string with optional flags. Here is the syntax for this function: re.string(pattern, string, flags=0) Here is the description of the parameters: Parameter Description pattern This is the regular expression to be matched. string This is the string which would be searched to match the pattern flags You can specifiy different flags using exclusive OR (|). These are modifiers which are listed in the table below. The re.search function returns a match object on success, None on failure. We would use group(num) or groups() function of match object to get matched expression. Match Object Methods Description group(num=0) This methods returns entire match (or specific subgroup num) 26 | P a g e
- 27. Tutorials Point, Simply Easy Learning groups() This method return all matching subgroups in a tuple (empty if there weren't any) Matching vs Searching: Python offers two different primitive operations based on regular expressions: match checks for a match only at the beginning of the string, while search checks for a match anywhere in the string (this is what Perl does by default). Search and Replace: Some of the most important re methods that use regular expressions is sub. Syntax: sub(pattern, repl, string, max=0) This method replace all occurrences of the RE pattern in string with repl, substituting all occurrences unless max provided. This method would return modified string. Regular-expression Modifiers - Option Flags Regular expression literals may include an optional modifier to control various aspects of matching. The modifier are specified as an optional flag. You can provide multiple modified using exclusive OR (|), as shown previously and may be represented by one of these: Modifier Description re.I Performs case-insensitive matching. re.L Interprets words according to the current locale.This interpretation affects the alphabetic group (w and W), as well as word boundary behavior (b and B). re.M Makes $ match the end of a line (not just the end of the string) and makes ^ match the start of any line (not just the start of the string). re.S Makes a period (dot) match any character, including a newline. re.U Interprets letters according to the Unicode character set. This flag affects the behavior of w, W, b, B. re.X Permits "cuter" regular expression syntax. It ignores whitespace (except inside a set [] or when escaped by a backslash), and treats unescaped # as a comment marker. Regular-expression patterns: 27 | P a g e
- 28. Tutorials Point, Simply Easy Learning Except for control characters, (+ ? . * ^ $ ( ) [ ] { } | ), all characters match themselves. You can escape a control character by preceding it with a backslash. Following table lists the regular expression syntax that is available in Python. Pattern Description ^ Matches beginning of line. $ Matches end of line. . Matches any single character except newline. Using m option allows it to match newline as well. [...] Matches any single character in brackets. [^...] Matches any single character not in brackets re* Matches 0 or more occurrences of preceding expression. re+ Matches 0 or 1 occurrence of preceding expression. re{ n} Matches exactly n number of occurrences of preceding expression. re{ n,} Matches n or more occurrences of preceding expression. re{ n, m} Matches at least n and at most m occurrences of preceding expression. a| b Matches either a or b. (re) Groups regular expressions and remembers matched text. (?imx) Temporarily toggles on i, m, or x options within a regular expression. If in parentheses, only that area is affected. (?-imx) Temporarily toggles off i, m, or x options within a regular expression. If in parentheses, only that area is affected. (?: re) Groups regular expressions without remembering matched text. (?imx: re) Temporarily toggles on i, m, or x options within parentheses. (?-imx: re) Temporarily toggles off i, m, or x options within parentheses. (?#...) Comment. 28 | P a g e
- 29. Tutorials Point, Simply Easy Learning (?= re) Specifies position using a pattern. Doesn't have a range. (?! re) Specifies position using pattern negation. Doesn't have a range. (?> re) Matches independent pattern without backtracking. w Matches word characters. W Matches nonword characters. s Matches whitespace. Equivalent to [tnrf]. S Matches nonwhitespace. d Matches digits. Equivalent to [0-9]. D Matches nondigits. A Matches beginning of string. Z Matches end of string. If a newline exists, it matches just before newline. z Matches end of string. G Matches point where last match finished. b Matches word boundaries when outside brackets. Matches backspace (0x08) when inside brackets. B Matches nonword boundaries. n, t, etc. Matches newlines, carriage returns, tabs, etc. 1...9 Matches nth grouped subexpression. 10 Matches nth grouped subexpression if it matched already. Otherwise refers to the octal representation of a character code. Regular-expression Examples: Literal characters: Example Description 29 | P a g e
- 30. Tutorials Point, Simply Easy Learning python Match "python". Character classes: Example Description [Pp]ython Match "Python" or "python" rub[ye] Match "ruby" or "rube" [aeiou] Match any one lowercase vowel [0-9] Match any digit; same as [0123456789] [a-z] Match any lowercase ASCII letter [A-Z] Match any uppercase ASCII letter [a-zA-Z0-9] Match any of the above [^aeiou] Match anything other than a lowercase vowel [^0-9] Match anything other than a digit Special Character Classes: Example Description . Match any character except newline d Match a digit: [0-9] D Match a nondigit: [^0-9] s Match a whitespace character: [ trnf] S Match nonwhitespace: [^ trnf] w Match a single word character: [A-Za-z0-9_] W Match a nonword character: [^A-Za-z0-9_] Repetition Cases: 30 | P a g e
- 31. Tutorials Point, Simply Easy Learning Example Description ruby? Match "rub" or "ruby": the y is optional ruby* Match "rub" plus 0 or more ys ruby+ Match "rub" plus 1 or more ys d{3} Match exactly 3 digits d{3,} Match 3 or more digits d{3,5} Match 3, 4, or 5 digits Nongreedy repetition: This matches the smallest number of repetitions: Example Description <.*> Greedy repetition: matches "<python>perl>" <.*?> Nongreedy: matches "<python>" in "<python>perl>" Grouping with parentheses: Example Description Dd+ No group: + repeats d (Dd)+ Grouped: + repeats Dd pair ([Pp]ython(, )?)+ Match "Python", "Python, python, python", etc. Backreferences: This matches a previously matched group again: Example Description ([Pp])ython&1ails Match python&rails or Python&Rails (['"])[^1]*1 Single or double-quoted string. 1 matches whatever the 1st group 31 | P a g e
- 32. Tutorials Point, Simply Easy Learning matched . 2 matches whatever the 2nd group matched, etc. Alternatives: Example Description python|perl Match "python" or "perl" rub(y|le)) Match "ruby" or "ruble" Python(!+|?) "Python" followed by one or more ! or one ? Anchors: This need to specify match position Example Description ^Python Match "Python" at the start of a string or internal line Python$ Match "Python" at the end of a string or line APython Match "Python" at the start of a string PythonZ Match "Python" at the end of a string bPythonb Match "Python" at a word boundary brubB B is nonword boundary: match "rub" in "rube" and "ruby" but not alone Python(?=!) Match "Python", if followed by an exclamation point Python(?!!) Match "Python", if not followed by an exclamation point Special syntax with parentheses: Example Description R(?#comment) Matches "R". All the rest is a comment R(?i)uby Case-insensitive while matching "uby" 32 | P a g e
- 33. Tutorials Point, Simply Easy Learning R(?i:uby) Same as above rub(?:y|le)) Group only without creating 1 backreference MySQL Database Access The Python standard for database interfaces is the Python DB-API. Most Python database interfaces adhere to this standard. You can choose the right database for your application. Python Database API supports a wide range of database servers: GadFly mSQL MySQL PostgreSQL Microsoft SQL Server 2000 Informix Interbase Oracle Sybase Here is the list of available Python databases interfaces: Python Database Interfaces and APIs You must download a separate DB API module for each database you need to access. For example, if you need to access an Oracle database as well as a MySQL database, you must download both the Oracle and the MySQL database modules. The DB API provides a minimal standard for working with databases, using Python structures and syntax wherever possible. This API includes the following: Importing the api module. Acquiring a connection with the database. Issuing SQL statements and stored procedures. Closing the connection We would learn all the concepts using MySQL so let's talk about MySQLdb module only. What is MySQLdb? MySQLdb is an interface for connecting to a MySQL database server from Python. It implements the Python Database API v2.0, and is built on top of the MySQL C API. How do I install the MySQLdb? Before proceeding you make sure you have MySQLdb installed on your machine. Just type the following in your Python script and execute it: #!/usr/bin/python 33 | P a g e
- 34. Tutorials Point, Simply Easy Learning import MySQLdb If it produces following result then it means MySQLdb module is not installed: Traceback (most recent call last): File "test.py", line 3, in <module> import MySQLdb ImportError: No module named MySQLdb To install MySQLdb module, download it from MySQLdb Download page and proceed as follows: $ gunzip MySQL-python-1.2.2.tar.gz $ tar -xvf MySQL-python-1.2.2.tar $ cd MySQL-python-1.2.2 $ python setup.py build $ python setup.py install Note: Make sure you have root privilege to install above module. Database Connection: Before connecting to a MySQL database make sure followings: You have created a database TESTDB. You have created a table EMPLOYEE in TESTDB. This table is having fields FIRST_NAME, LAST_NAME, AGE, SEX and INCOME. User ID "testuser" and password "test123" are set to access TESTDB Python module MySQLdb is installed properly on your machine. You have gone through MySQL tutorial to understand MySQL Basics. Example: Following is the example of connecting with MySQL database "TESTDB" #!/usr/bin/python import MySQLdb # Open database connection db = MySQLdb.connect("localhost","testuser","test123","TESTDB" ) # prepare a cursor object using cursor() method cursor = db.cursor() # execute SQL query using execute() method. cursor.execute("SELECT VERSION()") # Fetch a single row using fetchone() method. data = cursor.fetchone() print "Database version : %s " % data # disconnect from server 34 | P a g e
- 35. Tutorials Point, Simply Easy Learning db.close() While running this script, its producing following result at my Linux machine. Database version : 5.0.45 If a connection is established with the datasource then a Connection Object is returned and saved into db for further use otherwise db is set to None. Next db object is used to create a cursor object which in turn is used to execute SQL queries. Finally before coming out it ensures that database connection is closed and resources are released. Creating Database Table: Once a database connection is established, we are ready to create tables or records into the database tables using execute method of the created cursor. Example: First let's create Database table EMPLOYEE: #!/usr/bin/python import MySQLdb # Open database connection db = MySQLdb.connect("localhost","testuser","test123","TESTDB" ) # prepare a cursor object using cursor() method cursor = db.cursor() # Drop table if it already exist using execute() method. cursor.execute("DROP TABLE IF EXISTS EMPLOYEE") # Create table as per requirement sql = """CREATE TABLE EMPLOYEE ( FIRST_NAME CHAR(20) NOT NULL, LAST_NAME CHAR(20), AGE INT, SEX CHAR(1), INCOME FLOAT )""" cursor.execute(sql) # disconnect from server db.close() INSERT Operation: INSERT operation is required when you want to create your records into a database table. Example: 35 | P a g e
- 36. Tutorials Point, Simply Easy Learning Following is the example which executes SQL INSERT statement to create a record into EMPLOYEE table. #!/usr/bin/python import MySQLdb # Open database connection db = MySQLdb.connect("localhost","testuser","test123","TESTDB" ) # prepare a cursor object using cursor() method cursor = db.cursor() # Prepare SQL query to INSERT a record into the database. sql = """INSERT INTO EMPLOYEE(FIRST_NAME, LAST_NAME, AGE, SEX, INCOME) VALUES ('Mac', 'Mohan', 20, 'M', 2000)""" try: # Execute the SQL command cursor.execute(sql) # Commit your changes in the database db.commit() except: # Rollback in case there is any error db.rollback() # disconnect from server db.close() Above example can be written as follows to create SQL queries dynamically: #!/usr/bin/python import MySQLdb # Open database connection db = MySQLdb.connect("localhost","testuser","test123","TESTDB" ) # prepare a cursor object using cursor() method cursor = db.cursor() # Prepare SQL query to INSERT a record into the database. sql = "INSERT INTO EMPLOYEE(FIRST_NAME, LAST_NAME, AGE, SEX, INCOME) VALUES ('%s', '%s', '%d', '%c', '%d' )" % ('Mac', 'Mohan', 20, 'M', 2000) try: # Execute the SQL command cursor.execute(sql) # Commit your changes in the database db.commit() except: # Rollback in case there is any error db.rollback() # disconnect from server db.close() Example: 36 | P a g e
- 37. Tutorials Point, Simply Easy Learning Following code segment is another form of execute where you can pass parameters directly: .................................. user_id = "test123" password = "password" con.execute('insert into Login values("%s", "%s")' % (user_id, password)) .................................. READ Operation: READ Operation on any databasse means to fetch some useful information from the database. Once our database connection is established, we are ready to make a query into this database. We can use either fetchone() method to fetch single record or fetchall method to fetech multiple values from a database table. fetchone(): This method fetches the next row of a query result set. A result set is an object that is returned when a cursor object is used to query a table. fetchall(): This method fetches all the rows in a result set. If some rows have already been extracted from the result set, the fetchall() method retrieves the remaining rows from the result set. rowcount: This is a read-only attribute and returns the number of rows that were affected by an execute() method. Example: Following is the procedure to query all the records from EMPLOYEE table having salary more than 1000. #!/usr/bin/python import MySQLdb # Open database connection db = MySQLdb.connect("localhost","testuser","test123","TESTDB" ) # prepare a cursor object using cursor() method cursor = db.cursor() # Prepare SQL query to INSERT a record into the database. sql = "SELECT * FROM EMPLOYEE WHERE INCOME > '%d'" % (1000) try: # Execute the SQL command cursor.execute(sql) # Fetch all the rows in a list of lists. results = cursor.fetchall() for row in results: fname = row[0] lname = row[1] age = row[2] sex = row[3] income = row[4] # Now print fetched result print "fname=%s,lname=%s,age=%d,sex=%s,income=%d" % 37 | P a g e
- 38. Tutorials Point, Simply Easy Learning (fname, lname, age, sex, income ) except: print "Error: unable to fecth data" # disconnect from server db.close() This will produce following result: fname=Mac, lname=Mohan, age=20, sex=M, income=2000 Update Operation: UPDATE Operation on any databasse means to update one or more records which are already available in the database. Following is the procedure to update all the records having SEX as 'M'. Here we will increase AGE of all the males by one year. Example: #!/usr/bin/python import MySQLdb # Open database connection db = MySQLdb.connect("localhost","testuser","test123","TESTDB" ) # prepare a cursor object using cursor() method cursor = db.cursor() # Prepare SQL query to UPDATE required records sql = "UPDATE EMPLOYEE SET AGE = AGE + 1 WHERE SEX = '%c'" % ('M') try: # Execute the SQL command cursor.execute(sql) # Commit your changes in the database db.commit() except: # Rollback in case there is any error db.rollback() # disconnect from server db.close() DELETE Operation: DELETE operation is required when you want to delete some records from your database. Following is the procedure to delete all the records from EMPLOYEE where AGE is more than 20. Example: #!/usr/bin/python import MySQLdb # Open database connection 38 | P a g e
- 39. Tutorials Point, Simply Easy Learning db = MySQLdb.connect("localhost","testuser","test123","TESTDB" ) # prepare a cursor object using cursor() method cursor = db.cursor() # Prepare SQL query to DELETE required records sql = "DELETE FROM EMPLOYEE WHERE AGE > '%d'" % (20) try: # Execute the SQL command cursor.execute(sql) # Commit your changes in the database db.commit() except: # Rollback in case there is any error db.rollback() # disconnect from server db.close() Performing Transactions: Transactions are a mechanism that ensures data consistency. Transactions should have the following four properties: Atomicity: Either a transaction completes or nothing happens at all. Consistency: A transaction must start in a consistent state and leave the system is a consistent state. Isolation: Intermediate results of a transaction are not visible outside the current transaction. Durability: Once a transaction was committed, the effects are persistent, even after a system failure. The Python DB API 2.0 provides two methods to either commit or rollback a transaction. Example: You already have seen how we have implemented transations. Here is again similar example: # Prepare SQL query to DELETE required records sql = "DELETE FROM EMPLOYEE WHERE AGE > '%d'" % (20) try: # Execute the SQL command cursor.execute(sql) # Commit your changes in the database db.commit() except: # Rollback in case there is any error db.rollback() COMMIT Operation: Commit is the operation which gives a green signal to database to finalize the changes and after this operation no change can be reverted back. Here is a simple example to call commit method. 39 | P a g e
- 40. Tutorials Point, Simply Easy Learning db.commit() ROLLBACK Operation: If you are not satisfied with one or more of the changes and you want to revert back those changes completely then use rollback method. Here is a simple example to call rollback metho. db.rollback() Disconnecting Database: To disconnect Database connection, use close() method. db.close() If the connection to a database is closed by the user with the close() method, any outstanding transactions are rolled back by the DB. However, instead of depending on any of DB lower level implementation details, your application would be better off calling commit or rollback explicitly. Handling Errors: There are many sources of errors. A few examples are a syntax error in an executed SQL statement, a connection failure, or calling the fetch method for an already canceled or finished statement handle. The DB API defines a number of errors that must exist in each database module. The following table lists these exceptions. Exception Description Warning Used for non-fatal issues. Must subclass StandardError. Error Base class for errors. Must subclass StandardError. InterfaceError Used for errors in the database module, not the database itself. Must subclass Error. DatabaseError Used for errors in the database. Must subclass Error. DataError Subclass of DatabaseError that refers to errors in the data. OperationalError Subclass of DatabaseError that refers to errors such as the loss of a connection to the database. These errors are generally outside of the control of the Python scripter. 40 | P a g e
- 41. Tutorials Point, Simply Easy Learning IntegrityError Subclass of DatabaseError for situations that would damage the relational integrity, such as uniqueness constraints or foreign keys. InternalError Subclass of DatabaseError that refers to errors internal to the database module, such as a cursor no longer being active. ProgrammingError Subclass of DatabaseError that refers to errors such as a bad table name and other things that can safely be blamed on you. NotSupportedError Subclass of DatabaseError that refers to trying to call unsupported functionality. Your Python scripts should handle these errors but before using any of the above exceptions, make sure your MySQLdb has support for that exception. You can get more information about them by reading the DB API 2.0 specification. Sending Email using SMTP Simple Mail Transfer Protocol (SMTP) is a protocol which handles sending e-mail and routing e- mail between mail servers. Python provides smtplib module which defines an SMTP client session object that can be used to send mail to any Internet machine with an SMTP or ESMTP listener daemon. Here is a simple syntax to create one SMTP object which can later be used to send an email: import smtplib smtpObj = smtplib.SMTP( [host [, port [, local_hostname]]] ) Here is the detail of the parameters: host: This is the host running your SMTP server. You can specifiy IP address of the host or a domain name like tutorialspoint.com. This is optional argument. port: If you are providing host argument then you need to specifiy a port where SMTP server is listening. Usually this port would be 25. local_hostname: If your SMTP server is running on your local machine then you can specify just localhost as of this option. An SMTP object has an instance method called sendmail, which will typically be used to do the work of mailing a message. It takes three parameters: The sender - A string with the address of the sender. The receivers - A list of strings, one for each recipient. The message - A message as a string formatted as specified in the various RFCs. Example: Here is a simple way to send one email using Python script. Try it once: 41 | P a g e
- 42. Tutorials Point, Simply Easy Learning #!/usr/bin/python import smtplib sender = 'from@fromdomain.com' receivers = ['to@todomain.com'] message = """From: From Person <from@fromdomain.com> To: To Person <to@todomain.com> Subject: SMTP e-mail test This is a test e-mail message. """ try: smtpObj = smtplib.SMTP('localhost') smtpObj.sendmail(sender, receivers, message) print "Successfully sent email" except SMTPException: print "Error: unable to send email" Here you have placed a basic e-mail in message, using a triple quote, taking care to format the headers correctly. An e-mails requires a From, To, and Subject header, separated from the body of the e-mail with a blank line. To send the mail you use smtpObj to connect to the SMTP server on the local machine and then use the sendmail method along with the message, the from address, and the destination address as parameters (even though the from and to addresses are within the e-mail itself, these aren't always used to route mail). If you're not running an SMTP server on your local machine, you can use smtplib client to communicate with a remote SMTP server. Unless you're using a webmail service (such as Hotmail or Yahoo! Mail), your e-mail provider will have provided you with outgoing mail server details that you can supply them, as follows: smtplib.SMTP('mail.your-domain.com', 25) Sending an HTML email using Python: When you send a text message using Python then all the content will be treated as simple text. Even if you will include HTML tags in a text message, it will be displayed as simple text and HTML tags will not be formatted according to HTML syntax. But Python provides option to send an HTML message as actual HTML message. While sending an email message you can specify a Mime version, content type and character set to send an HTML email. Example: Following is the example to send HTML content as an email. Try it once: #!/usr/bin/python import smtplib message = """From: From Person <from@fromdomain.com> To: To Person <to@todomain.com> 42 | P a g e
- 43. Tutorials Point, Simply Easy Learning MIME-Version: 1.0 Content-type: text/html Subject: SMTP HTML e-mail test This is an e-mail message to be sent in HTML format <b>This is HTML message.</b> <h1>This is headline.</h1> """ try: smtpObj = smtplib.SMTP('localhost') smtpObj.sendmail(sender, receivers, message) print "Successfully sent email" except SMTPException: print "Error: unable to send email" Sending Attachements as an e-mail: To send an email with mixed content requires to set Content-type header to multipart/mixed. Then text and attachment sections can be specified within boundaries. A boundary is started with two hyphens followed by a unique number which can not appear in the message part of the email. A final boundary denoting the email's final section must also end with two hyphens. Attached files should be encoded with the pack("m") function to have base64 encoding before transmission. Example: Following is the example which will send a file /tmp/test.txt as an attachment. Try it once: #!/usr/bin/python import smtplib import base64 filename = "/tmp/test.txt" # Read a file and encode it into base64 format fo = open(filename, "rb") filecontent = fo.read() encodedcontent = base64.b64encode(filecontent) # base64 sender = 'webmaster@tutorialpoint.com' reciever = 'amrood.admin@gmail.com' marker = "AUNIQUEMARKER" body =""" This is a test email to send an attachement. """ # Define the main headers. part1 = """From: From Person <me@fromdomain.net> To: To Person <amrood.admin@gmail.com> Subject: Sending Attachement MIME-Version: 1.0 43 | P a g e
- 44. Tutorials Point, Simply Easy Learning Content-Type: multipart/mixed; boundary=%s --%s """ % (marker, marker) # Define the message action part2 = """Content-Type: text/plain Content-Transfer-Encoding:8bit %s --%s """ % (body,marker) # Define the attachment section part3 = """Content-Type: multipart/mixed; name="%s" Content-Transfer-Encoding:base64 Content-Disposition: attachment; filename=%s %s --%s-- """ %(filename, filename, encodedcontent, marker) message = part1 + part2 + part3 try: smtpObj = smtplib.SMTP('localhost') smtpObj.sendmail(sender, reciever, message) print "Successfully sent email" except Exception: print "Error: unable to send email" Multithreaded Programming Running several threads is similar to running several different programs concurrently, but with the following benefits: Multiple threads within a process share the same data space with the main thread and can therefore share information or communicate with each other more easily than if they were separate processes. Threads sometimes called light-weight processes and they do not require much memory overhead; theycare cheaper than processes. A thread has a beginning, an execution sequence, and a conclusion. It has an instruction pointer that keeps track of where within its context it is currently running. It can be pre-empted (interrupted) It can temporarily be put on hold (also known as sleeping) while other threads are running - this is called yielding. Starting a New Thread: To spawn another thread, you need to call following method available in thread module: thread.start_new_thread ( function, args[, kwargs] ) This method call enables a fast and efficient way to create new threads in both Linux and Windows. 44 | P a g e
- 45. Tutorials Point, Simply Easy Learning The method call returns immediately and the child thread starts and calls function with the passed list of agrs. When function returns, the thread terminates. Here args is a tuple of arguments; use an empty tuple to call function without passing any arguments. kwargs is an optional dictionary of keyword arguments. Example: #!/usr/bin/python import thread import time # Define a function for the thread def print_time( threadName, delay): count = 0 while count < 5: time.sleep(delay) count += 1 print "%s: %s" % ( threadName, time.ctime(time.time()) ) # Create two threads as follows try: thread.start_new_thread( print_time, ("Thread-1", 2, ) ) thread.start_new_thread( print_time, ("Thread-2", 4, ) ) except: print "Error: unable to start thread" while 1: pass This would produce following result: Thread-1: Thu Jan 22 15:42:17 2009 Thread-1: Thu Jan 22 15:42:19 2009 Thread-2: Thu Jan 22 15:42:19 2009 Thread-1: Thu Jan 22 15:42:21 2009 Thread-2: Thu Jan 22 15:42:23 2009 Thread-1: Thu Jan 22 15:42:23 2009 Thread-1: Thu Jan 22 15:42:25 2009 Thread-2: Thu Jan 22 15:42:27 2009 Thread-2: Thu Jan 22 15:42:31 2009 Thread-2: Thu Jan 22 15:42:35 2009 Although it is very effective for low-level threading, but the thread module is very limited compared to the newer threading module. The Threading Module: The newer threading module included with Python 2.4 provides much more powerful, high-level support for threads than the thread module discussed in the previous section. The threading module exposes all the methods of the thread module and provides some additional methods: threading.activeCount(): Returns the number of thread objects that are active. threading.currentThread(): Returns the number of thread objects in the caller's thread control. 45 | P a g e
- 46. Tutorials Point, Simply Easy Learning threading.enumerate(): Returns a list of all thread objects that are currently active. In addition to the methods, the threading module has the Thread class that implements threading. The methods provided by the Thread class are as follows: run(): The run() method is the entry point for a thread. start(): The start() method starts a thread by calling the run method. join([time]): The join() waits for threads to terminate. isAlive(): The isAlive() method checks whether a thread is still executing. getName(): The getName() method returns the name of a thread. setName(): The setName() method sets the name of a thread. Creating Thread using Threading Module: To implement a new thread using the threading module, you have to do the following: Define a new subclass of the Thread class. Override the __init__(self [,args]) method to add additional arguments. Then override the run(self [,args]) method to implement what the thread should do when started. Once you have created the new Thread subclass, you can create an instance of it and then start a new thread by invoking the start() or run() methods. Example: #!/usr/bin/python import threading import time exitFlag = 0 class myThread (threading.Thread): def __init__(self, threadID, name, counter): self.threadID = threadID self.name = name self.counter = counter threading.Thread.__init__(self) def run(self): print "Starting " + self.name print_time(self.name, self.counter, 5) print "Exiting " + self.name def print_time(threadName, delay, counter): while counter: if exitFlag: thread.exit() time.sleep(delay) print "%s: %s" % (threadName, time.ctime(time.time())) counter -= 1 # Create new threads thread1 = myThread(1, "Thread-1", 1) thread2 = myThread(2, "Thread-2", 2) # Start new Threads thread1.start() 46 | P a g e
- 47. Tutorials Point, Simply Easy Learning thread2.run() while thread2.isAlive(): if not thread1.isAlive(): exitFlag = 1 pass print "Exiting Main Thread" This would produce following result: Starting Thread-2 Starting Thread-1 Thread-1: Thu Jan 22 15:53:05 2009 Thread-2: Thu Jan 22 15:53:06 2009 Thread-1: Thu Jan 22 15:53:06 2009 Thread-1: Thu Jan 22 15:53:07 2009 Thread-2: Thu Jan 22 15:53:08 2009 Thread-1: Thu Jan 22 15:53:08 2009 Thread-1: Thu Jan 22 15:53:09 2009 Exiting Thread-1 Thread-2: Thu Jan 22 15:53:10 2009 Thread-2: Thu Jan 22 15:53:12 2009 Thread-2: Thu Jan 22 15:53:14 2009 Exiting Thread-2 Exiting Main Thread Synchronizing Threads: The threading module provided with Python includes a simple-to-implement locking mechanism that will allow you to synchronize threads. A new lock is created by calling the Lock() method, which returns the new lock. The acquire(blocking) method the new lock object would be used to force threads to run synchronously. The optional blocking parameter enables you to control whether the thread will wait to acquire the lock. If blocking is set to 0, the thread will return immediately with a 0 value if the lock cannot be acquired and with a 1 if the lock was acquired. If blocking is set to 1, the thread will block and wait for the lock to be released. The release() method of the the new lock object would be used to release the lock when it is no longer required. Example: #!/usr/bin/python import threading import time class myThread (threading.Thread): def __init__(self, threadID, name, counter): self.threadID = threadID self.name = name self.counter = counter threading.Thread.__init__(self) def run(self): 47 | P a g e
- 48. Tutorials Point, Simply Easy Learning print "Starting " + self.name # Get lock to synchronize threads threadLock.acquire() print_time(self.name, self.counter, 3) # Free lock to release next thread threadLock.release() def print_time(threadName, delay, counter): while counter: time.sleep(delay) print "%s: %s" % (threadName, time.ctime(time.time())) counter -= 1 threadLock = threading.Lock() threads = [] # Create new threads thread1 = myThread(1, "Thread-1", 1) thread2 = myThread(2, "Thread-2", 2) # Start new Threads thread1.start() thread2.start() # Add threads to thread list threads.append(thread1) threads.append(thread2) # Wait for all threads to complete for t in threads: t.join() print "Exiting Main Thread" This would produce following result: Starting Thread-1 Starting Thread-2 Thread01: Thu Jan 22 16:04:38 2009 Thread01: Thu Jan 22 16:04:39 2009 Thread01: Thu Jan 22 16:04:40 2009 Thread02: Thu Jan 22 16:04:42 2009 Thread02: Thu Jan 22 16:04:44 2009 Thread02: Thu Jan 22 16:04:46 2009 Exiting Main Thread Multithreaded Priority Queue: The Queue module allows you to create a new queue object that can hold a specific number of items. There are following methods to control the Queue: get(): The get() removes and returns an item from the queue. put(): The put adds item to a queue. qsize() : The qsize() returns the number of items that are currently in the queue. empty(): The empty( ) returns True if queue is empty; otherwise, False. full(): the full() returns True if queue is full; otherwise, False. Example: 48 | P a g e
- 49. Tutorials Point, Simply Easy Learning #!/usr/bin/python import Queue import threading import time exitFlag = 0 class myThread (threading.Thread): def __init__(self, threadID, name, q): self.threadID = threadID self.name = name self.q = q threading.Thread.__init__(self) def run(self): print "Starting " + self.name process_data(self.name, self.q) print "Exiting " + self.name def process_data(threadName, q): while not exitFlag: queueLock.acquire() if not workQueue.empty(): data = q.get() queueLock.release() print "%s processing %s" % (threadName, data) else: queueLock.release() time.sleep(1) threadList = ["Thread-1", "Thread-2", "Thread-3"] nameList = ["One", "Two", "Three", "Four", "Five"] queueLock = threading.Lock() workQueue = Queue.Queue(10) threads = [] threadID = 1 # Create new threads for tName in threadList: thread = myThread(threadID, tName, workQueue) thread.start() threads.append(thread) threadID += 1 # Fill the queue queueLock.acquire() for word in nameList: workQueue.put(word) queueLock.release() # Wait for queue to empty while not workQueue.empty(): pass # Notify threads it's time to exit exitFlag = 1 # Wait for all threads to complete for t in threads: t.join() print "Exiting Main Thread" 49 | P a g e
- 50. Tutorials Point, Simply Easy Learning This would produce following result: Starting Thread-2 Starting Thread-1 Starting Thread-3 Thread-2 processing One Thread-1 processing Two Thread-3 processing Three Thread-2 processing Four Thread-1 processing Five Exiting Thread-3 Exiting Thread-2 Exiting Thread-1 Exiting Main Thread Further Detail: Refer to the link http://www.tutorialspoint.com/python List of Tutorials from TutorialsPoint.com Learn JSP Learn ASP.Net Learn Servlets Learn HTML Learn log4j Learn HTML5 Learn iBATIS Learn XHTML Learn Java Learn CSS Learn JDBC Learn HTTP Java Examples Learn JavaScript Learn Best Practices Learn jQuery Learn Python Learn Prototype Learn Ruby Learn script.aculo.us Learn Ruby on Rails Web Developer's Guide Learn SQL Learn RADIUS Learn MySQL Learn RSS Learn AJAX Learn SEO Techniques Learn C Programming Learn SOAP Learn C++ Programming Learn UDDI Learn CGI with PERL Learn Unix Sockets Learn DLL Learn Web Services Learn ebXML Learn XML-RPC Learn Euphoria Learn UML Learn GDB Debugger Learn UNIX Learn Makefile Learn WSDL Learn Parrot Learn i-Mode Learn Perl Script Learn GPRS Learn PHP Script Learn GSM 50 | P a g e
- 51. Tutorials Point, Simply Easy Learning Learn Six Sigma Learn WAP Learn SEI CMMI Learn WML Learn WiMAX Learn Wi-Fi Learn Telecom Billing webmaster@TutorialsPoint.com 51 | P a g e