QA/QC Mechanical and Welding Inspector
Download as DOC, PDF2 likes4,277 views
Asad Ahsan is a Lead QA/QC Inspector with over 10 years of experience in mechanical and welding inspection. He has extensive experience inspecting welding, piping, and tanks for large power and industrial projects in Saudi Arabia. He is certified in welding inspection and NDT testing. His responsibilities include qualifying welders, performing visual and dimensional inspections, ensuring quality standards are met, and generating inspection reports. He is proficient in English, Arabic, Urdu, and Hindi.
QA/QC Mechanical and Welding Inspector
- 1. Asad Ahsan Lead QA/QC Inspector (Mechanical & Welding) CERTIFIED Welding Inspector (CSWIP 3.1) CSWIP Certificate Number # 56613 NDT Level II (VT, PT, UT, MPI, RT) Email ID: asad_bem@yahoo.com Cell: 00966582087587 00966582087587 STRENGTHS: Self starter & result oriented, task & resource planning, strong leadership, Capable of handling challenging & difficult situations under pressure, Hard working & honor the commitments, Spark & potential of learning new concepts, techniques & methodologies in technical and management areas. PERSONAL INFORMATION: Date of birth : 11 November 1983 Nationality : Pakistan Religion : Muslim Marital status : Married Driving License : Saudi Arabia & Pakistan (valid) Iqama : Transferable QUALIFICATION: 1. Associate Engineer Mechanical Technology Govt. Poly Technical institute Lahore (Punjab Board of Technical Education) SESSION (2000-2003) 2nd Division COMPUTER SKILLS: • Auto Cad 2D , Computer Fundamentals, Windows Operating System • M.S Word, M.S Excel, M.S Power point EXPERIENCE (10 Years): Presently working with TYPSA Consulting, Engineering as Lead QC Welding Inspector at Strategic Reservoirs in BARIMAN (Phase 2) Jeddah Project. October 2010 – September 2015 1) Arabian Bemco Contracting Co. Ltd., KSA Position: QA/QC (Welding Inspector) Project: Power Plant PP-12 Riyadh & Qurayyah Combined Cycle Power Plant Project 1
- 2. (QCCPP) Phase II October 2009 – September 2010 2) Bemco Steel Industries Co. Ltd., KSA Position: QA/QC (Piping & Tanks) Project: Power Plant PP-10 Riyadh Duties and Responsibilities Include: • Check the joint preparation and fit up of piping & equipment of different material as per WPS & Drawings • Inspect the welding as per WPS, Specifications and Codes • Verify the filler wires and electrodes as per WPS • Prepare and maintain the record of all fit up and welding on daily basis • Conduct & witness the WQT of pipe and plate welders • To check the RT films of welders for updating their repair %age log. • Maintain a master list of qualified welders and maintain the welder continuity log. • Check the electrode baking and issuance log daily • Check the calibration and working condition of baking and holding ovens • Issue copy of WPS to the concerned persons (welding supervisor) according to base material • Check the welder cards of welders working on job at site area to verify their qualification for particular job being welded. • Prepare welding summery of test packs. • Perform the final box up inspection of static equipment. • Prepare dossier of equipment and piping system as per project technical specifications. Responsibilities as Mechanical inspector (piping) include: • To do Inspection of Piping fit ups as per ISO drawings • Piping system walk down inspection and preparing punch list of discrepancies • Witness of hydro testing of piping system and preparing inspection reports 3) Metscco Heavy Steel Industries Co. Ltd., KSA May 2007 – August 2009 and November 2010 – May 2012 Position: QA/QC Engineer – Mechanical Project: Erection of Oil & Water Storage Tanks RESPONSIBILITIES: • Qualification of welders / welding operators in accordance with ASME Sec IX & AWS D1.1 2
- 3. • To maintain welders / welding operators continuity log. • Raise NCRs against deviations/violations and closing the same after proper corrective actions • Ensure that welding is performed as per approved welding procedures. • Co-ordination with Customer Inspector, ASME Authorized Inspector for carrying out external inspections • Material Verification of boilers according to Drawings & cutting plan • Check Marking of Nozzles, Pads, Man holes, Head holes and other boiler accessories as per Drawings. • Visual Welding inspection of Nozzles, Pads, Man holes, Head holes, end plates, Circumferential as well as longitudinal shell joints, other boiler accessories and referring them for Radiographic Testing • Check the internal & external cleaning of Tank before Hydrostatic test. • Witnessing Hydrostatic tests of pressure vessels as per governing codes, applicable drawings and client specifications. • Carrying out Peaking, Banding, Plumbness, and Roundness Inspections • Check data punching in accordance with TPIA reference • Preparation of Dossier for submission to the Third Party Inspector 4) Arabian Bemco Contracting Co. Ltd., KSA December 2004 – March 2007 Position : Inspector QA/QC • Visual & Dimensional inspections of Welding and performing Dye Penetrant Test • To conduct Welder / Welding Operator’s Qualification test in accordance to ASME Section IX. • Coordination with Third party inspectors, Client Inspectors and Authorized Inspector Codes & Standards Awareness: AWWA D100, API 650, API 620, API 1104, & ASME B31.1, ASME B31.3.Saudi Aramco Standards 3
- 4. Projects Worked on: 1. Reinforcement of 3 Nos. Dia. 37.5 M, Treated & untreated Crude Oil Storage Tanks at Al- Qurayat Power Plant Project (Metscco / SSEM/ SEC) 2. Fire Water Tanks 4 Nos., Dia. 20 M at PP-09 Power Plant (Bemco Steel / SEC) 3. Pipe Line Works Dia. 250, 350, 450, 550, 650, 750 mm Line Pipe at PP10 Power Plant (Bemco Steel/SEC). 4. Construction of Treated Crude Oil Storage Tanks - 3 Nos., Dia. 38 M at Jizan Power Plant Extension Project (Al-Tokhi / SEC) 5. PP-9 Riyadh Extension Tank Farm Project - Construction of Treated Crude Oil Storage Tanks 4 Nos., Dia. 54 M. (Arabian Bemco / SEC) 6. Inlet Air Cooling System in PP-9 Block C – Thermal Water Storage Tank 34.2 m ID X 22m Height (BEMCO/ SEC). 7. Inlet Air Cooling System in PP-9 Block D – Thermal Water Storage Tank 34.2 m ID X 22 m Height (BEMCO/ SEC). 8. PP9 Extension Project 20 Nos. Exhaust Stacks (Bachman Industries Inc. / BEMCO/SEC). 9. Tabouk Power Plant – 3 Nos., Exhaust Stacks (Bachman Industries Inc. / National Contracting Co. Ltd /SEC) LANGUAGES KNOWN: Professional proficiency in English, Arabic, Urdu & Hindi PERSONAL INFORMATION: Date of birth : 11 November 1983 Nationality : Pakistan Religion : Muslim Marital status : Married Driving License : Saudi Arabia & Pakistan (valid) Iqama: Transferable Updated on : 11/06/2015 (Nothing beyond this line) 4