R16 b.techeeeiv yearrevisedsyllabus

R16 B.TECH EEE.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
B.TECH. ELECTRICAL AND ELECTRONICS ENGINEERING
IV YEAR COURSE STRUCTURE & SYLLABUS (R16)
Applicable From 2016-17 Admitted Batch
IV YEAR I SEMESTER
S. No.
Course
Code
Course Title L T P Credits
1 EE701PC Power Semiconductor Drives 4 1 0 4
2 EE702PC Power System Operation and control 4 1 0 4
3 Professional Elective - II 3 0 0 3
4 Professional Elective - III 3 0 0 3
5 Professional Elective - IV 3 0 0 3
6 EE703PC Electrical Systems Simulation Lab 0 0 3 2
7 EE704PC Electrical Workshop 0 0 3 2
8 EE705PC Industry Oriented Mini Project 0 0 3 2
9 EE706PC Seminar 0 0 2 1
Total Credits 17 2 11 24
IV YEAR II SEMESTER
S. No. Course
Code
Course Title
L T P Credits
1 Open Elective - III 3 0 0 3
2 Professional Elective-V 3 0 0 3
3 Professional Elective-VI 3 0 0 3
4 EE801PC Major Project 0 0 30 15
Total Credits 9 0 30 24
Professional Elective - I (PE - I):
EM611PE Computer Organization
EE612PE Linear Systems Analysis
EE613PE Linear and Digital IC Applications
EE614PE Electrical and Electronics Instrumentation
Professional Elective - II (PE - II):
EE721PE Digital Signal Processing
EE722PE HVDC Transmission
ET721PE Switch Mode Power Supplies
EE724PE Reliability Engineering

R16 B.TECH EEE.
Professional Elective - III (PE - III):
EE731PE Digital Control Systems
EE732PE Power Quality
EE733PE Modern Power Electronics
EE734PE Optimization Techniques
Professional Elective - IV (PE-IV):
EE741PE Programmable Logic Controllers
EE742PE EHV AC Transmission Systems
EE743PE Flexible A.C. Transmission Systems
EE744PE Special Machines
Professional Elective - V (PE-V):
EE851PE Artificial Neural Networks and Fuzzy Systems
EE852PE Electrical Distribution Systems
EE853PE Wind, Solar and Hybrid Energy Systems
EE854PE High Voltage Engineering
Professional Elective - VI (PE-VI):
EE861PE VLSI Design
EE862PE Smart Electric Grid
EE863PE Utilization of Electric Power
EE864PE Electric and Hybrid Vehicles
*Open Elective subjects’ syllabus is provided in a separate document.
*Open Elective – Students should take Open Electives from the List of Open Electives
Offered by Other Departments/Branches Only.
Ex: - A Student of Mechanical Engineering can take Open Electives from all other
departments/branches except Open Electives offered by Mechanical Engineering Dept.

R16 B.TECH EEE.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
LIST OF OPEN ELECTIVES OFFERED BY VARIOUS DEPARTMENTS FOR
B.TECH. III AND IV YEARS
S.
No.
Name of the Department
Offering Open Electives
Open Elective – I
(Semester – V)
Open Elective – II
(Semester – VI)
1 Aeronautical Engg. AE511OE: Introduction
to Space Technology
AE621OE: Introduction to
Aerospace Engineering
2 Automobile Engg. CE511OE: Disaster
Management
MT512OE: Intellectual
Property Rights
MT621OE: Data Structures
MT622OE: Artificial
Neural Networks
3 Biomedical Engg. BM511OE: Reliability
Engineering
BM621OE: Medical
Electronics
4 Civil Engg. CE511OE: Disaster
Management.
CE621OE: Remote
Sensing and GIS
CE622OE: Geo-
Informatics
CE623OE: Intellectual
Property Rights
5 Civil and Environmental
Engg.
CE511OE: Disaster
Management
CN621OE: Environmental
Impact Assessment
CE623OE: Intellectual
Property Rights
6 Computer Science and Engg.
/ Information Technology
CS511OE: Operating
Systems
CS512OE: Database
Management Systems
CS621OE: Java
Programming
CS622OE: Software
Testing Methodologies
CS623OE: Cyber Security
7 Electronics and
Communication Engg. /
Electronics and Telematics
Engg.
EC511OE: Principles of
Electronic
Communications
EC621OE: Principles of
Computer Communications
and Networks
8 Electronics and Computer
Engg.
EM511OE: Scripting
Languages
EM621OE: Soft
Computing Techniques
9 Electrical and Electronics
Engg.
EE511OE: Non-
Conventional Power
Generation
EE512OE: Electrical
Engineering Materials
EE513OE:
Nanotechnology
EE621OE: Design
Estimation and Costing of
Electrical Systems
EE622OE: Energy Storage
Systems
EE623OE: Introduction to
Mechatronics
10 Electronics and
Instrumentation Engg.
EI511OE: Electronic
Measurements and
Instrumentation
EI621OE: Industrial
Electronics
11 Mechanical Engg. ME511OE: Optimization
Techniques
ME512OE: Computer
Graphics
ME513OE: Introduction
ME621OE: World Class
Manufacturing
ME622OE: Fundamentals
of Robotics
ME623OE: Fabrication

R16 B.TECH EEE.
to Mechatronics
ME514OE:
Fundamentals of
Mechanical Engineering
Processes
12 Mechanical Engg. (Material
Science and
Nanotechnology)
NT511OE: Fabrication
Processes
NT512OE: Non
destructive Testing
Methods
NT513OE:
Fundamentals of
Engineering Materials
NT621OE: Introduction to
Material Handling
NT622OE: Non-
Conventional Energy
Sources
NT623OE: Robotics
13 Mechanical Engg.
(mechatronics)
MT511OE: Analog and
Digital I.C. Applications
MT512OE: Intellectual
Property Rights
MT513OE: Computer
Organization
MT621OE: Data Structures
MT622OE: Artificial
Neural Networks
MT623OE: Industrial
Management
14 Metallurgical and Materials
Engg.
MM511OE: Materials
Characterization
Techniques
MM621OE: Science and
Technology of Nano
Materials
MM622OE: Metallurgy of
Non Metallurgists
15 Mining Engg. MN511OE: Introduction
to Mining Technology
MN621OE: Coal
Gasification, Coal Bed
Methane and Shale Gas
16 Petroleum Engg. PE511OE: Materials
Science and Engineering
PE512OE: Renewable
Energy Sources
PE513OE:
Environmental
Engineering
PE621OE: Energy
Management and
Conservation
PE622OE: Optimization
Techniques
PE623OE:
Entrepreneurship and
Small Business Enterprises
S.
No.
Name of the Department
Offering Open Electives
Open Elective –III
(Semester – VIII)
1 Aeronautical Engg. AE831OE: Air Transportation Systems
AE832OE: Rockets and Missiles
2 Automobile Engg. AM831OE: Introduction to Mechatronics
AM832OE: Microprocessors and Microcontrollers
3 Biomedical Engg. BM831OE: Telemetry and Telecontrol
BM832OE: Electromagnetic Interference and
Compatibility
4 Civil Engg. CE831OE: Environmental Impact Assessment
CE832OE: Optimization Techniques in Engineering
CE833OE: Entrepreneurship and Small Business
Enterprises
5 Civil and Environmental
Engg.
CN831OE: Remote Sensing and GIS

R16 B.TECH EEE.
Enterprises
6 Computer Science and
Engg. / Information
Technology
CS831OE: Linux Programming
CS832OE: R Programming
CS833OE: PHP Programming
7 Electronics and
Communication Engg. /
Electronics and Telematics
Engg.
EC831OE: Electronic Measuring Instruments
8 Electronics and Computer
Engg.
EM831OE: Data Analytics
9 Electrical and Electronics
Engg.
EE831OE: Entrepreneur Resource Planning
EE832OE: Management Information Systems
EE833OE: Organizational Behaviour
10 Electronics and
Instrumentation Engg.
EI831OE: Sensors and Transducers,
EI832OE: PC Based Instrumentation
11 Mechanical Engg. ME831OE: Total Quality Management
ME832OE: Industrial Safety, Health, and
Environmental Engineering
ME833OE: Basics of Thermodynamics
ME834OE: Reliability Engineering
12 Mechanical Engg. (Material
Science and
Nanotechnology)
NT831OE: Concepts of Nano Science And Technology
NT832OE: Synthesis of Nanomaterials
NT833OE: Characterization of Nanomaterials
13 Mechanical Engg.
(mechatronics)
MT831OE: Renewable Energy Sources
MT832OE: Production Planning and Control
Enterprises
14 Metallurgical and Materials
Engg.
MM831OE: Design and Selection of Engineering
Materials
15 Mining Engg. MN831OE: Solid Fuel Technology
MN832OE: Health & Safety in Mines
16 Petroleum Engg. PE831OE: Disaster Management
PE832OE: Fundamentals of Liquefied Natural Gas
PE833OE: Health, Safety and Environment in
Petroleum Industry
*Open Elective – Students should take Open Electives from List of Open Electives Offered
by Other Departments/Branches Only.
Ex: - A Student of Mechanical Engineering can take Open Electives from all other
departments/branches except Open Electives offered by Mechanical Engineering Dept.

R16 B.TECH EEE.
EE701PC: POWER SEMICONDUCTOR DRIVES
B.Tech. IV Year I Sem. L T P C
4 1 0 4
Prerequisite: Power Electronics & Electrical Machines – I, II
Course Objectives:
 To introduce the drive system and operating modes of drive and its characteristics
 To understand Speed – Torque characteristics of different motor drives by various
power converter topologies
 To appreciate the motoring and braking operations of drive
 To differentiate DC and AC drives
Course Outcomes: After completion of this course the student is able to
 Indentify the drawbacks of speed control of motor by conventional methods.
 Differentiate Phase controlled and chopper controlled DC drives speed-torque
characteristics merits and demerits
 Understand Ac motor drive speed–torque characteristics using different control
strategies its merits and demerits
 Describe Slip power recovery schemes
UNIT – I
Control of DC motors by single phase and three phase converters: Introduction to
Thyristor controlled Drives, Single Phase semi and Fully controlled converters connected to
d.c separately excited and d.c series motors – continuous current operation – output voltage
and current waveforms – Speed and Torque expressions – Speed – Torque Characteristics-
Problems on Converter fed d.c motors.
Three phase semi and fully controlled converters connected to d.c separately excited and d.c
series motors – output voltage and current waveforms – Speed and Torque expressions –
Speed – Torque characteristics – Problems.
UNIT – II
Four quadrant operation of DC drives: Introduction to Four quadrant operation – Motoring
operations, Electric Braking – Plugging, Dynamic, and Regenerative Braking operations.
Four quadrant operation of D.C motors by single phase and three phase dual converters –
Closed loop operation of DC motor (Block Diagram Only)
Control of DC Motors by Choppers: Single quadrant, Two quadrant and four quadrant
chopper fed dc separately excited and series motors – Continuous current operation – Output
voltage and current wave forms – Speed and torque expressions – speed-torque
characteristics – Problems on Chopper fed D.C Motors – Closed Loop operation ( Block
Diagram Only)

R16 B.TECH EEE.
UNIT - III
Control of Induction Motor Through Stator Voltage And Stator Frequency: Variable
voltage characteristics-Control of Induction Motor by Ac Voltage Controllers – Waveforms –
speed torque characteristics.
Variable frequency characteristics-Variable frequency control of induction motor by Voltage
source and current source inverter and cyclo converters- PWM control – Comparison of VSI
and CSI operations – Speed torque characteristics – numerical problems on induction motor
drives – Closed loop operation of induction motor drives (Block Diagram Only)
UNIT – IV
Rotor Side Control of Induction Motor: Static rotor resistance control – Slip power
recovery – Static Scherbius drive – Static Kramer Drive – their performance and speed torque
characteristics – advantages, applications, problems.
UNIT –V
Control of Synchronous Motors: Separate control and self control of synchronous motors –
Operation of self controlled synchronous motors by VSI, CSI and cyclo converters. Load
commutated CSI fed Synchronous Motor – Operation – Waveforms – speed torque
characteristics – Applications – Advantages and Numerical Problems – Closed Loop control
operation of synchronous motor drives (Block Diagram Only), variable frequency control -
Cyclo converter, PWM based VSI& CSI.
Text Books:
1. “G K Dubey”, Fundamentals of Electric Drives, CRC Press, 2002.
2. “Vedam Subramanyam”, Thyristor Control of Electric drives, Tata McGraw Hill
Publications, 1987.
Reference Books:
1. “S K Pillai”, A First course on Electrical Drives, New Age International (P) Ltd. 2nd
Edition. 1989
2. “P. C. Sen”, Thyristor DC Drives, Wiley-Blackwell, 1981
3. “B. K. Bose”, Modern Power Electronics, and AC Drives, Pearson 2015.
4. “R. Krishnan”, Electric motor drives - modeling, Analysis and control, Prentice Hall
PTR, 2001

R16 B.TECH EEE.
EE702PC: POWER SYSTEM OPERATION AND CONTROL
4 1 0 4
Prerequisite: Power Systems - I & Power Systems - II
Course Objectives:
 To understand real power control and operation
 To know the importance of frequency control
 To analyze different methods to control reactive power
 To understand unit commitment problem and importance of economic load dispatch
 To understand real time control of power systems
Course Outcomes: After completion of this course, the student will be able to
 Analyze the optimal scheduling of power plants
 Analyze the steady state behavior of the power system for voltage and frequency
fluctuations
 Describe reactive power control of a power system
 Design suitable controller to dampen the frequency and voltage steady state
oscillations
UNIT – I
Load –Frequency Control: Basics of speed governing mechanism and modeling - speed-
load characteristics – load sharing between two synchronous machines in parallel. Control
area concept LFC control of a single-area system. Static and dynamic analysis of
uncontrolled and controlled cases. Integration of economic dispatch control with LFC. Two-
area system – modeling - static analysis of uncontrolled case - tie line with frequency bias
control of two-area system - state variable model.
UNIT – II
Reactive Power – Voltage Control: Basics of reactive power control. Excitation systems –
modeling. Static and dynamic analysis - stability compensation - generation and absorption of
reactive power. Relation between voltage, power and reactive power at a node - method of
voltage control - tap-changing transformer. System level control using generator voltage
magnitude setting, tap setting of OLTC transformer and MVAR injection of switched
capacitors to maintain acceptable voltage profile and to minimize transmission loss.

R16 B.TECH EEE.
UNIT – III
Economic Load Dispatch: Statement of economic dispatch problem – cost of generation –
incremental cost curve - co-ordination equations without loss and with loss, solution
by direct method and λ-iteration method.
UNIT – IV
Unit Commitment: Statement of Unit Commitment problem – constraints; spinning reserve,
thermal unit constraints, hydro constraints, fuel constraints and other constraints. Solution
methods - Priority-list methods - forward dynamic programming approach. Numerical
problems on priority-list method using full-load average production cost and Forward DP
method.
UNIT – V
Computer Control of Power Systems: Need of computer control of power systems.
Concept of energy control centre (or) load dispatch centre and the functions - system
monitoring - data acquisition and control. System hardware configuration – SCADA and
EMS functions. Network topology – Importance of Load Forecasting and simple techniques
of forecasting.
Text Books:
1. D. P. Kothari and I. J. Nagrath, ‘Modern Power System Analysis’, Third Edition, Tata
McGraw Hill Publishing Company Limited, New Delhi, 2003.
2. Olle. I. Elgerd, ‘Electric Energy Systems Theory – An Introduction’, Tata McGraw
Hill Publishing Company Ltd, New Delhi, 30th
reprint, 2007.
Reference Books:
1. Chakrabarti & Haldar, “Power System Analysis: Operation and Control”, Prentice
Hall of India, 2004 Edition.
2. C. L. Wadhwa , ‘Power System Analysis’, New Age International-6th Edition, 2010,
ISBN : 978-81-224-2839-1
3. Robert Miller, James Malinowski, ‘Power System Operation’, Tata McGraw Hill
Publishing Company Ltd, New Delhi, 3rd
Edition 2009.
4. P. Kundur, Neal J. Balu, ‘Power System Stability & Control’, IEEE, 1998.

R16 B.TECH EEE.
EE721PE: DIGITAL SIGNAL PROCESSING
(PROFESSIONAL ELECTIVE – II)
3 0 0 3
Course Objectives: This course is an essential course that provides design techniques for
processing all type of signals in various fields. The main objectives are:
 To provide background and fundamental material for the analysis and processing of
digital signals.
 To familiarize the relationships between continuous-time and discrete time signals
and systems.
 To study fundamentals of time, frequency and Z-plane analysis and to discuss the
inter-relationships of these analytic method.
 To study the designs and structures of digital (IIR and FIR) filters from analysis to
synthesis for a given specifications.
 The impetus is to introduce a few real-world signal processing applications.
 To acquaint in FFT algorithms, Multi-rate signal processing techniques and finite
word length effects.
Course Outcomes: On completion of this subject, the student should be able to:
 Perform time, frequency, and Z -transform analysis on signals and systems.
 Understand the inter-relationship between DFT and various transforms.
 Understand the significance of various filter structures and effects of round off errors.
 Design a digital filter for a given specification.
 Understand the fast computation of DFT and appreciate the FFT processing.
 Understand the tradeoffs between normal and multi rate DSP techniques and finite
length word effects.
UNIT - I
Introduction: Introduction to Digital Signal Processing: Discrete Time Signals & Sequences,
conversion of continuous to discrete signal, Normalized Frequency, Linear Shift Invariant
Systems, Stability, and Causality, linear differential equation to difference equation, Linear
Constant Coefficient Difference Equations, Frequency Domain Representation of Discrete
Time Signals and Systems
Realization of Digital Filters: Applications of Z – Transforms, Solution of Difference
Equations of Digital Filters, System Function, Stability Criterion, Frequency Response of
Stable Systems, Realization of Digital Filters – Direct, Canonic, Cascade and Parallel Forms.
UNIT - II
Discrete Fourier Transforms: Properties of DFT, Linear Convolution of Sequences using
DFT, Computation of DFT: Over-Lap Add Method, Over-Lap Save Method, Relation
between DTFT, DFS, DFT and Z-Transform.

R16 B.TECH EEE.
Fast Fourier Transforms: Fast Fourier Transforms (FFT) - Radix-2 Decimation-in-Time
and Decimation-in-Frequency FFT Algorithms, Inverse FFT, and FFT with General Radix-N.
UNIT - III
IIR Digital Filters: Analog filter approximations – Butterworth and Chebyshev, Design of
IIR Digital Filters from Analog Filters, Step and Impulse Invariant Techniques, Bilinear
Transformation Method, Spectral Transformations.
UNIT - IV
FIR Digital Filters: Characteristics of FIR Digital Filters, Frequency Response, Design of
FIR Filters: Fourier Method, Digital Filters using Window Techniques, Frequency Sampling
Technique, Comparison of IIR & FIR filters.
UNIT - V
Multirate Digital Signal Processing: Introduction, Down Sampling, Decimation,
Upsampling, Interpolation, Sampling Rate Conversion, Conversion of Band Pass Signals,
Concept of Resampling, Applications of Multi Rate Signal Processing.
Finite Word Length Effects: Limit cycles, Overflow Oscillations, Round-off Noise in IIR
Digital Filters, Computational Output Round off Noise, Methods to Prevent Overflow, Trade
off between Round Off and Overflow Noise, Measurement of Coefficient Quantization
Effects through Pole-Zero Movement, Dead Band Effects.
TEXT BOOKS:
1. Digital Signal Processing, Principles, Algorithms, and Applications: John G. Proakis,
Dimitris G. Manolakis, Pearson Education / PHI, 2007.
2. Discrete Time Signal Processing – A. V. Oppenheim and R.W. Schaffer, PHI, 2009
3. Fundamentals of Digital Signal Processing – Loney Ludeman, John Wiley, 2009
REFERENCES:
1. Digital Signal Processing – Fundamentals and Applications – Li Tan, Elsevier, 2008
2. Fundamentals of Digital Signal Processing using MATLAB – Robert J. Schilling,
Sandra L. Harris, Thomson, 2007
3. Digital Signal Processing - A Practical approach, Emmanuel C. Ifeachor and Barrie
W. Jervis, 2nd
Edition, Pearson Education, 2009

R16 B.TECH EEE.
EE722PE: HVDC TRANSMISSION
3 0 0 3
Prerequisite: Power Systems & Power Electronics
Course Objectives:
 To compare EHV AC and HVDC systems
 To analyze Graetz circuit and also explain 6 and 12 pulse converters
 To control HVDC systems with various methods and to perform power flow analysis
in AC/DC systems
 To describe various protection methods for HVDC systems and Harmonics
 Compare EHV AC and HVDC system and to describe various types of DC links
 Analyze Graetz circuit for rectifier and inverter mode of operation
 Describe various methods for the control of HVDC systems and to perform power
flow analysis in AC/DC systems
 Describe various protection methods for HVDC systems and classify Harmonics and
design different types of filters
UNIT – I
Basic Concepts: Necessity of HVDC systems, Economics and Terminal equipment of
HVDC transmission systems, Types of HVDC Links, Apparatus required for HVDC
Systems, Comparison of AC and DC Transmission, Application of DC Transmission System,
Planning and Modern trends in D.C. Transmission.
Analysis of HVDC Converters: Choice of Converter Configuration, Analysis of Graetz
circuit, Characteristics of 6 Pulse and 12 Pulse converters, Cases of two 3 phase converters in
Y/Y mode – their performance.
UNIT – II
Converter and HVDC System Control: Principle of DC Link Control, Converters Control
Characteristics, Firing angle control, Current and extinction angle control, Effect of source
inductance on the system, Starting and stopping of DC link, Power Control.
Reactive Power Control In HVDC: Introduction, Reactive Power Requirements in steady
state, sources of reactive power- Static VAR Compensators, Reactive power control during
transients.
UNIT – III
Power Flow Analysis in AC/DC Systems: Modelling of DC Links, DC Network, DC
Converter, Controller Equations, Solution of DC load flow, P.U. System for DC quantities,
solution of AC-DC Power flow-Simultaneous method-Sequential method.

R16 B.TECH EEE.
UNIT - IV
Converter Faults and Protection: Converter faults, protection against over current and over
voltage in converter station, surge arresters, smoothing reactors, DC breakers, Audible noise,
space charge field, corona effects on DC lines, Radio interference.
UNIT – V
Harmonics: Generation of Harmonics, Characteristics harmonics, calculation of AC
Harmonics, Non- Characteristics harmonics, adverse effects of harmonics, Calculation of
voltage and Current harmonics, Effect of Pulse number on harmonics
Filters: Types of AC filters, Design of Single tuned filters –Design of High pass filters.
TEXT BOOKS:
1. “K. R. Padiyar”, HVDC Power Transmission Systems: Technology and system
Interactions, New Age International (P) Limited, and Publishers, 1990.
2. “S K Kamakshaiah, V Kamaraju”, HVDC Transmission, TMH Publishers, 2011
3. “S. Rao”, EHVAC and HVDC Transmission Engineering and Practice, Khanna
publications, 3rd
Edition 1999.
REFERENCE BOOKS:
1. “Jos Arrillaga”, HVDC Transmission, The institution of electrical engineers, IEE
power & energy series 29, 2nd
edition 1998.
2. “E. W. Kimbark”, Direct Current Transmission, John Wiley and Sons, volume 1,
1971.
3. “E. Uhlmann”, Power Transmission by Direct Current, B. S. Publications, 2009

R16 B.TECH EEE.
EE723PE: SWITCH MODE POWER SUPPLIES
3 0 0 3
Prerequisite: Power Electronics
Course Objectives:
 The introduction of concept of switched mode power supply with both D.C. and A.C.
outputs.
 To elaborately study the working of switched mode topologies including resonant
power suppliers.
 To have the knowledge of their importance and applications in various fields.
Course Outcomes: After completion of this course the students are able to understand the
concepts and principle of operation of various types of switched mode power supply systems
for both D.C. and A.C. outputs.
UNIT - I
Switched Mode Power Conversion: Introduction to Switched Mode Power Supply, Linear
DC to DC Power converters, Non- Idealities in reactive elements, Design of Inductors,
Design of Transformers- Copper loss, Power factor, Non-isolated topologies, Isolated
topologies, Quasi-resonant zero-current/zero-voltage switch Operating principle of Non-
Isolated DC to DC power Converters (Buck, Boost, Buck-Boost, and Cuk) Equivalent circuit
model of the non-isolated DC-DC converters. Isolated converters (forward, Flyback).
UNIT - II
Multiple Output Flyback Switch Mode Power Supplies: Introduction, operating Modes,
operating principles, Direct off line Flyback Switch Mode Power Supplies, Flyback
converter, snubber network, Problems.
UNIT – III
Using Power Semiconductors in Switched Mode Topologies: Introduction to Switched
Mode Power Supply Topologies, The Power Supply Designer’s Guide to High Voltage
Transistors, Base Circuit Design for High Voltage Bipolar Transistors in Power Converters,
Isolated Power Semiconductors for High Frequency Power Supply Applications
UNIT - IV
Rectification: Explanation, Advantages and disadvantages, SMPS and linear power supply
comparison, Theory of operation , Input rectifier stage, Inverter stage, Voltage converter
and output rectifier, Regulation, An Introduction to Synchronous Rectifier Circuits using
Power MOS Transistors

R16 B.TECH EEE.
UNIT – V
Switch mode variable power supplies: Introduction, variable SMPS techniques, operating
principles, practical limiting factors, Efficiency and EMI Applications.
Resonant Power Supplies: An Introduction to Resonant Power Supplies, Resonant Power
Supply Converters - The Solution for Mains Pollution Problems.
TEXT BOOKS:
1. “Keith H. Billings and Taylor Morey”, “Switch Mode Power Supplies”, Tata
McGraw-Hill Publishing Company, 3rd
edition 2010.
2. “Robert W. Erickson”, “Switch Mode Power Supplies”, Springer, 2nd edition 2001.
REFERENCE BOOKS:
1. “Sanjaya Maniktala”, “Switching Power Supplies A-Z”, Elsevier, 2nd
Edition 2012
2. “Steven M. Sandler”, Switch Mode Power Supplies, Tata McGraw Hill, 1st
Edition
2006

R16 B.TECH EEE.
MT723PE/EE724PE: RELIABILITY ENGINEERING
3 0 0 3
Prerequisite: Mathematics - III
Course Objectives:
 To introduce the basic concepts of reliability, various models of reliability
 To analyze reliability of various systems
 To introduce techniques of frequency and duration for reliability evaluation of
repairable systems
 model various systems applying reliability networks
 evaluate the reliability of simple and complex systems
 estimate the limiting state probabilities of repairable systems
 apply various mathematical models for evaluating reliability of irreparable systems
UNIT – I
Basic Probability Theory: Elements of probability, probability distributions, Random
variables, Density and Distribution functions- Binomial distribution- Expected value and
standard deviation - Binomial distribution, Poisson distribution, normal distribution,
exponential distribution, Weibull distribution.
Definition of Reliability: Definition of terms used in reliability, Component reliability,
Hazard rate, derivation of the reliability function in terms of the hazard rate. Hazard models -
Bath tub curve, Effect of preventive maintenance. Measures of reliability: Mean Time to
Failure and Mean Time Between Failures.
UNIT – II
Network Modeling and Evaluation Of Simple Systems: Basic concepts- Evaluation of
network Reliability / Unreliability - Series systems, Parallel systems- Series-Parallel systems-
Partially redundant systems- Examples.
Network Modeling and Evaluation of Complex systems: Conditional probability method-
tie set, Cutset approach- Event tree and reduced event tree methods- Relationships between
tie and cutsets- Examples.
UNIT – III
Time Dependent Probability: Basic concepts- Reliability function f(t). F(t), R(t) and h(t) -
Relationship between these functions.
Network Reliability Evaluation Using Probability Distributions: Reliability Evaluation of
Series systems, Parallel systems – Partially redundant systems- determination of reliability
measure- MTTF for series and parallel systems – Examples.

R16 B.TECH EEE.
UNIT – IV
Discrete Markov Chains: Basic concepts- Stochastic transitional probability matrix- time
dependent probability evaluation- Limiting State Probability evaluation- Absorbing states –
Examples
Continuous Markov Processes: Modeling concepts- State space diagrams- Unreliability
evaluation of single and two component repairable systems
UNIT – V
Frequency and Duration Techniques: Frequency and duration concepts, application to
multi state problems, Frequency balance approach.
Approximate System Reliability Evaluation: Series systems – Parallel systems- Network
reduction techniques- Cut set approach- Common mode failures modeling and evaluation
techniques- Examples.
TEXT BOOKS:
1. Roy Billinton and Ronald N Allan, Reliability Evaluation of Engineering Systems,
Plenum Press, 1983.
2. E. Balagurusamy, Reliability Engineering by Tata McGraw-Hill Publishing Company
Limited, 2002.
REFERENCE BOOK:
1. K. K. Agarwal, Reliability Engineering-Kluwer Academic Publishers, 1993.

R16 B.TECH EEE.
EE731PE/EI733PE: DIGITAL CONTROL SYSTEMS
(PROFESSIONAL ELECTIVE – III)
3 0 0 3
Prerequisite: Control Systems
Course Objectives:
 To understand the fundamentals of digital control systems, z-transforms
 To understand state space representation of the control systems, concepts of
controllability and observability
 To study the estimation of stability in different domains
 To understand the design of discrete time control systems, compensators, state
feedback controllers, state observers through various transformations
 Carry map S-plane and Z-plane, do state-space analysis
 Carry stability analysis in S-domain and Z-domains
 Carry stability analysis through bilinear transformation and R-H criteria,
 design of discrete-time control systems, design of lag, lead, lead-lag compensators,
design of PID controllers and design of state feedback controllers and observers,
 Apply the above concepts to real-world electrical and electronics problems and
applications.
UNIT - I
Introduction To Digital Control Systems And Z-Transforms: Introduction - Merits and
Demerits of Digital Control Systems - Practical aspects of the choice of sampling rate and
Multirate sampling - Basic discrete time signals - Quantization – Sampling Theorem -
Data Conversions and Quantization - Sampling process - Mathematical Modeling - Data
Reconstruction and Filtering of sampled signals - Zero - Order Hold (ZOH).
z- Transform and Inverse z-Transform, Relationship between s - plane and z - plane -
Difference equation - Solution by recursion and z-Transform - Pulse Transfer Functions of
the ZOH and relationship between G(s) and G(z) - Bilinear Transformation.
UNIT- II
Input/output Analysis of Digital Control Systems: Pulse transfer function - z transform
analysis of open loop, closed loop systems - Modified z Transform - transfer function -
Stability of linear digital control systems - Stability tests – Jury Stability test.
Root loci - Frequency domain analysis - Bode plots - Gain margin and phase margin.
UNIT – III
Design of Controllers For I/O Model Digital Control Systems: Cascade and Feedback
Compensation by continuous data controllers - Digital controllers - Design using Bilinear

R16 B.TECH EEE.
Transformation - Realization of Digital PID controllers, Design of Digital Control Systems
based on Root Locus Technique.
UNIT – IV
State Space Analysis and State Feedback Control Design of Digital Control Systems:
State Equations of discrete data systems, solution of discrete state equations, State Transition
Matrix: Computation methods for State Transition Matrix: z - transform method - Relation
between State Equations and Pulse Transfer Functions.
Concepts on Controllability and Observability - Pole placement design by state feedback.
UNIT - V
Digital State Observer and Stability Analysis: Design of the full order and reduced order
state observer, Design of Dead beat Controller - some case studies - Stability analysis of
discrete time systems based on Lyapunov approach.
TEXT BOOKS:
1. K. Ogata, Discrete Time Control Systems, PHI/Addison - Wesley Longman Pte. Ltd.,
India, Delhi, 1995.
2. B. C Kuo, Digital Control Systems, 2nd
Edition, Oxford University Press, Inc., 1992.
REFERENCE BOOKS:
1. F. Franklin, J.D. Powell, and M.L. Workman, Digital control of Dynamic Systems,
Addison - Wesley Longman, Inc., Menlo Park, CA , 1998.
2. M. Gopal, Digital Control and State Variable Methods, Tata McGraw Hill, India,
1997.
3. C. H. Houpis and G.B. Lamont, Digital Control Systems, McGraw Hill, 1985.
4. John S. Baey, Fundamentals of Linear State Space Systems, McGraw Hill, 1st
edition
1999
5. Bernard Fried Land, Control System Design, McGraw Hill, 1st
edition 1986.
6. Dorsay, Continuous and Discrete Control Systems, McGraw Hill, 2001.

R16 B.TECH EEE.
EE732PE: POWER QUALITY
3 0 0 3
Prerequisite: Power Systems - II
Course Objectives:
 Definition of power quality and different terms of power quality.
 Study of voltage power quality issue – short and long interruption.
 Detail study of characterization of voltage sag magnitude and three phase unbalanced
voltage sag.
 Know the behaviour of power electronics loads; induction motors, synchronous motor
etc by the power quality issues.
 Overview of mitigation of power quality issues by the VSI converters.
Course Outcomes: After completion of this course, the student will be able to:
 Know the severity of power quality problems in distribution system
 Understand the concept of voltage sag transformation from up-stream (higher
voltages) to down-stream (lower voltage)
 Concept of improving the power quality to sensitive load by various mitigating
custom power devices
UNIT – I
Introduction: Introduction of the Power Quality (PQ) problem, Terms used in PQ: Voltage,
Sag, Swell, Surges, Harmonics, over voltages, spikes, Voltage fluctuations, Transients,
Interruption, overview of power quality phenomenon, Remedies to improve power quality,
power quality monitoring.
UNIT – II
Long & Short Interruptions: Interruptions – Definition – Difference between failures,
outage, Interruptions – causes of Long Interruptions – Origin of Interruptions – Limits for the
Interruption frequency – Limits for the interruption duration – costs of Interruption –
Overview of Reliability evaluation to power quality, comparison of observations and
reliability evaluation.
Short interruptions: definition, origin of short interruptions, basic principle, fuse saving,
voltage magnitude events due to re-closing, voltage during the interruption, monitoring of
short interruptions, difference between medium and low voltage systems. Multiple events,
single phase tripping – voltage and current during fault period, voltage and current at post
fault period, stochastic prediction of short interruptions.
UNIT – III
Single and Three Phase Voltage Sag Characterization: Voltage sag – definition, causes of
voltage sag, voltage sag magnitude, and monitoring, theoretical calculation of voltage sag

R16 B.TECH EEE.
magnitude, voltage sag calculation in non-radial systems, meshed systems, and voltage sag
duration.
Three phase faults, phase angle jumps, magnitude and phase angle jumps for three phase
unbalanced sags, load influence on voltage sags.
UNIT – IV
Power Quality Considerations In Industrial Power Systems: Voltage sag – equipment
behaviour of Power electronic loads, induction motors, synchronous motors, computers,
consumer electronics, adjustable speed AC drives and its operation. Mitigation of AC Drives,
adjustable speed DC drives and its operation, mitigation methods of DC drives.
UNIT - V
Mitigation of Interruptions & Voltage Sags: Overview of mitigation methods – from fault
to trip, reducing the number of faults, reducing the fault clearing time changing the power
system, installing mitigation equipment, improving equipment immunity, different events and
mitigation methods. System equipment interface – voltage source converter, series voltage
controller, shunt controller, combined shunt and series controller.
Power Quality and EMC Standards: Introduction to standardization, IEC Electromagnetic
compatibility standards, European voltage characteristics standards, PQ surveys.
TEXT BOOKS:
1. “Math H J Bollen”, “Understanding Power Quality Problems” , IEEE Press, 2000.
2. “R. Sastry Vedam and Mulukutla S. Sarma”, “Power Quality VAR Compensation in
Power Systems”, CRC Press, 2008.
REFERENCE BOOKS:
1. C. Sankaran, Power Quality, CRC Press 2001.
2. Roger C. Dugan, Mark F. Mc Granaghan, Surya Santoso, H. Wayne Beaty, Electrical
Power Systems Quality, Tata McGraw Hill Education Private Ltd, 3rd
Edition 2012.

R16 B.TECH EEE.
EE733PE: MODERN POWER ELECTRONICS
3 0 0 3
Prerequisite: Power Electronics
Course Objectives:
 To understand various Power Electronics devices such as SCR, TRIAC, DIAC,
IGBT, GTO etc.
 To understand application of aforesaid Power Electronics devices in Choppers,
Inverters and Converters etc.
 To understand control of Electrical Motors through DC-DC converters, AC
Converters etc.
 To understand the use of Inductors and Capacitors in Choppers, Inverters and
Converters.
Course outcomes: Students are able to
 To understand various Power Electronics devices such as SCR, TRIAC, DIAC, IGBT,
GTO etc.
 To understand application of aforesaid Power Electronics devices in Choppers,
Inverters and Converters etc.
 To understand control of Electrical Motors through DC-DC converters, AC
Converters etc.
 To understand the use of Inductors and Capacitors in Choppers, Inverters and
Converters.
UNIT - I
High-Power Semiconductor Devices: Introduction, High-Power Switching Devices, Diodes,
Silicon-Controlled Rectifier (SCR), Gate Turn-Off (GTO) Thyristor, Gate-Commutated
Thyristor (GCT), Insulated Gate Bipolar Transistor (IGBT), Other Switching Devices,
Operation of Series-Connected Devices, Main Causes of Voltage Unbalance, Voltage
Equalization for GCTs,
UNIT-II
Cascaded H-Bridge Multilevel Inverters: Introduction, Sinusoidal PWM, Modulation
Scheme, Harmonic Content, Over modulation, Third Harmonic Injection PWM, Space
Vector Modulation, Switching States, Space Vectors, Dwell Time Calculation, Modulation
Index, Switching Sequence, Spectrum Analysis, Even-Order Harmonic Elimination,
Discontinuous Space Vector Modulation.
Introduction, H-Bridge Inverter, Bipolar Pulse-Width Modulation, Unipolar Pulse-Width
Modulation.

R16 B.TECH EEE.
UNIT - III
Diode-Clamped Multilevel Inverters: Three-Level Inverter, Converter Configuration,
Switching State ,Commutation, Space Vector Modulation, Stationary Space Vectors , Dwell
Time Calculation, Relationship Between V_refLocation and Dwell Times, Switching
Sequence Design, Inverter Output Waveforms and Harmonic Content , Even-Order Harmonic
Elimination, Neutral-Point Voltage Control, Causes of Neutral-Point Voltage Deviation ,
Effect of Motoring and Regenerative Operation, Feedback Control of Neutral-Point Voltage
UNIT - IV
DC-DC Switch-Mode Converters & Switching DC Power Supplies Control of dc-dc
converter, Buck converter, boost converter, buck-boost converter, cuk dc-dc converter, full-
bridge dc-dc converter, dc-dc converter comparison. Introduction, linear power supplies,
overview of switching power supplies, dc-dc converters with electrical isolation, control of
switch mode dc power supplies, power supply protection, and electrical isolation in the
feedback loop, designing to meet the power supply specifications.
UNIT - V
Resonant Converters & Power Conditioners And Uninterruptible Power Supplies
Classification of resonant converters, basic resonant circuit concepts, load-resonant
converters, resonant-switch converters, zero-voltage-switching, resonant-dc-link inverters
with zero-voltage switching’s, high frequency-link integral-half cycle converters. Power line
disturbances, Introduction to Power Quality, power Conditioners, uninterruptible power
supplies, Applications.
TEXT BOOKS:
1. “M. H. Rashid”, Power electronics circuits, Devices and applications, PHI, I edition –
1995.
2. “Ned Mohan, Tore M. Undeland and William P. Robbins, A”, “Power Electronics
converters, Applications and Design” John Wiley & Sons, Inc., Publication, 3rd
Edition 2003
REFERENCE BOOK:
1. “Bin Wu, A”, “High-Power Converters and Ac Drives” John Wiley & Sons, Inc.,
Publication (Free down load from rapidshire.com) 2006.

R16 B.TECH EEE.
EE734PE/EC741PE: OPTIMIZATION TECHNIQUES
3 0 0 3
Prerequisite: Mathematics – I & Mathematics – II
Course Objectives:
 To introduce various optimization techniques i.e classical, linear programming,
transportation problem, simplex algorithm, dynamic programming
 Constrained and unconstrained optimization techniques for solving and optimizing an
electrical and electronic engineering circuits design problems in real world situations.
 To explain the concept of Dynamic programming and its applications to project
implementation.
 explain the need of optimization of engineering systems
 understand optimization of electrical and electronics engineering problems
 apply classical optimization techniques, linear programming, simplex algorithm,
transportation problem
 apply unconstrained optimization and constrained non-linear programming and
dynamic programming
 Formulate optimization problems.
UNIT – I
Introduction and Classical Optimization Techniques: Statement of an Optimization
problem – design vector – design constraints – constraint surface – objective function –
objective function surfaces – classification of Optimization problems.
Classical Optimization Techniques: Single variable Optimization – multi variable
Optimization without constraints – necessary and sufficient conditions for
minimum/maximum – multivariable Optimization with equality constraints.
Solution by method of Lagrange multipliers – Multivariable Optimization with inequality
constraints – Kuhn – Tucker conditions.
UNIT – II
Linear Programming: Standard form of a linear programming problem – geometry of linear
programming problems – definitions and theorems – solution of a system of linear
simultaneous equations – pivotal reduction of a general system of equations – motivation to
the simplex method – simplex algorithm.
Transportation Problem: Finding initial basic feasible solution by north – west corner rule,
least cost method and Vogel’s approximation method – testing for optimality of balanced
transportation problems.

R16 B.TECH EEE.
UNIT – III
Unconstrained Nonlinear Programming: One dimensional minimization methods,
Classification, Fibonacci method and Quadratic interpolation method
Unconstrained Optimization Techniques: Univariant method, Powell’s method and
steepest descent method.
UNIT – IV
Constrained Nonlinear Programming: Characteristics of a constrained problem -
classification - Basic approach of Penalty Function method - Basic approach of Penalty
Function method - Basic approaches of Interior and Exterior penalty function methods -
Introduction to convex programming problem.
UNIT – V
Dynamic Programming: Dynamic programming multistage decision processes – types –
concept of sub optimization and the principle of optimality – computational procedure in
dynamic programming – examples illustrating the calculus method of solution - examples
illustrating the tabular method of solution.
TEXT BOOKS:
1. Singiresu S. Rao, Engineering Optimization: Theory and Practice by John Wiley and
Sons, 4th
edition, 2009.
2. H. S. Kasene & K. D. Kumar, Introductory Operations Research, Springer (India),
Pvt. Ltd., 2004
REFERENCE BOOKS:
1. George Bernard Dantzig, Mukund Narain Thapa, “Linear programming”, Springer
series in operations research 3rd
edition, 2003.
2. H.A. Taha, “Operations Research: An Introduction”, 8th
Edition, Pearson/Prentice
Hall, 2007.
3. Kalyanmoy Deb, “Optimization for Engineering Design – Algorithms and Examples”,
PHI Learning Pvt. Ltd, New Delhi, 2005.

R16 B.TECH EEE.
EE741PE: PROGRAMMABLE LOGIC CONTROLLERS
(PROFESSIONAL ELECTIVE – IV)
3 0 0 3
Prerequisite: Basic Electrical Course or equivalent.
Course Objectives:
 To provide knowledge levels needed for PLC programming and operating.
 To make the students how devices to which PLC input and output modules are
connected
 To train the students to create ladder diagrams from process control descriptions.
 To make the students understand various types of PLC registers
 Apply PLC Timers and Counters for the control of industrial processes
 To make the students understand PLC functions, Data Handling Function
Course Outcomes: After completion of this course, the student
 Understand the purpose, functions, and operations of a PLC
 Identify the basic components of the PLC and how they function
 View a directory of processor files using PLC software
 Ability to gain knowledge on Programmable Logic Controllers
 Will understand different types of Devices to which PLC input and output modules
are Connected
 To provide the knowledge about understand various types of PLC registers
 Able to create ladder diagrams from process control descriptions
 Ability to apply PLC timers and counters for the control of industrial processes
 Able to use different types PLC functions, Data Handling Function.
UNIT - I
PLC Basics PLC system, I/O modules and interfacing CPU processor programming
equipment programming formats, construction of PLC ladder diagrams, devices connected to
I/O modules.
UNIT - II
PLC Programming input instructions, outputs, operational procedures, programming
examples using contacts and coils. Drill-press operation. Digital logic gates programming in
the Boolean algebra system, conversion examples Ladder diagrams for process control
Ladder diagrams and sequence listings, ladder diagram construction and flow chart for spray
process system.
UNIT - III
PLC Registers: Characteristics of Registers module addressing holding registers input
registers, output registers. PLC Functions Timer functions and industrial applications

R16 B.TECH EEE.
counters counter function industrial applications, Architecture functions, Number comparison
functions, number conversion functions.
UNIT - IV
Data handling functions: SKIP, Master control Relay Jump Move FIFO, FAL, ONS, CLR
and Sweep functions and their applications. Bit Pattern and changing a bit shift register,
sequence functions and applications, controlling of two axes and three axis Robots with PLC,
Matrix functions.
UNIT - V
Analog PLC operation: Analog modules and systems Analog signal processing multi bit data
processing , analog output application examples, PID principles position indicator with PID
control, PID modules, PID tuning, PID functions
TEXT BOOKS:
1. “John W Webb and Ronald A Reiss”, Programmable Logic Controllers – Principle
and Applications, PHI, 5th
Edition 2003.
2. “JR Hackworth and F. D Hackworth Jr”, Programmable Logic Controllers –
Programming Method and Applications by - Pearson, 2004
REFERENCE BOOKS:
1. “W. Bolton”, Programmable Logic Controllers, Newnes, 4th
Edition 2000.

R16 B.TECH EEE.
EE742PE: EHV AC TRANSMISSION SYSTEMS
3 0 0 3
Prerequisite: Power systems - II
Course Objectives:
 To understand the basic concepts of EHV AC transmission.
 To get the Knowledge on EHV transmission line inductance and capacitance
 To understand the voltage gradients of conductor
 To identify corona effects on transmission lines
 To calculate electrostatic fields of EHV AC lines and its effects
 To Analyze travelling waves
 To distinguish various compensators for voltage control
Course Outcomes: After completion of this course, the student will be able to:
 Understand the basic concepts of EHV AC transmission.
 Get the Knowledge on EHV transmission line inductance and capacitance
 Understand the voltage gradients of conductor
 Identify corona effects on transmission lines
 Calculate electrostatic fields of EHVAC lines and its effects
 Analyze travelling waves
 Distinguish various compensators for voltage control
UNIT – I
Preliminaries: Necessity of EHV AC transmission – advantages and problems–power
handling capacity and line losses- mechanical considerations – resistance of conductors –
properties of bundled conductors – bundle spacing and bundle radius- Examples.
UNIT – II
Line and Ground Reactive Parameters: Line inductance and capacitances – sequence
inductances and capacitances – modes of propagation – ground return - Examples
Voltage Gradients of Conductors: Electrostatics – field of sphere gap – field of line
changes and properties – charge – potential relations for multi-conductors – surface voltage
gradient on conductors – distribution of voltage gradient on sub-conductors of bundle –
Examples.
UNIT – III
Corona Effects – I: Power loss and audible noise (AN) – corona loss formulae – charge
voltage diagram – generation, characteristics - limits and measurements of AN – relation
between 1-phase and 3-phase AN levels – Examples.
Corona Effects – II: Radio interference (RI) - corona pulses generation, properties, limits –
frequency spectrum – modes of propagation – excitation function – measurement of RI, RIV
and excitation functions – Examples.

R16 B.TECH EEE.
UNIT – IV
Electro Static Field: Electrostatic field: calculation of electrostatic field of EHV/AC lines –
effect on humans, animals and plants – electrostatic induction in unenergised circuit of
double-circuit line – electromagnetic interference-Examples.
Traveling Wave Theory: Traveling wave expression and solution- source of excitation-
terminal conditions- open circuited and short-circuited end- reflection and refraction
coefficients-Lumped parameters of distributed lines-generalized constants-No load voltage
conditions and charging current.
UNIT – V
Line Compensation: Power circle diagram and its use – voltage control using synchronous
condensers – cascade connection of shunt and series compensation – sub synchronous
resonance in series capacitor – compensated lines – static VAR compensating system.
TEXT BOOKS:
1. “R. D. Begamudre”, EHVAC Transmission Engineering, New Age International (p)
Ltd., 3rd
Edition 2006.
2. S. Rao, HVAC and DC Transmission, Khanna Publishers, 3rd
Edition 2001.
REFERENCE BOOKS:
1. “E. Kuffel, W. S. Zaengl, J. Kuffel”, High Voltage Engineering Fundamentals,
Elsevier, 3rd
Edition 2016.
2. “Mazen Abdel-salam, Hussein Ains, Abdab EI – Mors hedy and Roshdy Radwan”,
High Voltage Engineering: Theory and Practice, CRC Press, 2nd
Edition 2000.
3. “Hugh M. Ryan”, High Voltage Engineering and Testing, IEE power and energy
series 32, The Institution of Engineering and Technology 2nd
edition 2001.

R16 B.TECH EEE.
EE743PE: FLEXIBLE A.C. TRANSMISSION SYSTEMS
3 0 0 3
Prerequisite: Power Electronics, Power System Analysis & Power System Operation and
Control
Course Objectives:
 To understand the fundamentals of FACTS Controllers
 To know the importance of controllable parameters and types of FACTS controllers &
their benefits
 To understand the objectives of Shunt and Series compensation
 To Control STATCOM and SVC and their comparison and the regulation of
STATCOM, Functioning and control of GCSC, TSSC and TCSC
 Choose proper controller for the specific application based on system requirements
 Understand various systems thoroughly and their requirements
 Understand the control circuits of Shunt Controllers SVC & STATCOM for various
functions viz. Transient stability Enhancement, voltage instability prevention and
power oscillation damping
 Understand the Power and control circuits of Series Controllers GCSC, TSSC and
TCSC
UNIT - I
Facts Concepts: Transmission interconnections power flow in an AC system, loading
capability limits, Dynamic stability considerations, importance of controllable parameters,
basic types of FACTS controllers, and benefits from FACTS controllers.
UNIT - II
Voltage Source Converters: Single phase, three phase full wave bridge converters
transformer connections for 12 pulse operation.
Three level voltage source converter, pulse width modulation converter, basic concept of
current source Converters, and comparison of current source converters with voltage source
converters.
UNIT - III
Static Shunt Compensation: Objectives of shunt compensation, midpoint voltage
regulation, voltage instability prevention, improvement of transient stability, Power
oscillation damping, Methods of controllable var generation, variable impedance type static
var generators, switching converter type var generators and hybrid var generators.

R16 B.TECH EEE.
UNIT - IV
SVC and STATCOM: SVC: FC-TCR and TSC-TCR. STATCOM: The regulation and
slope. Comparison between SVC and STATCOM
UNIT - V
Static Series Compensators: Objectives of Series compensation, concept of series
capacitive compensation, GTO thyristor-controlled series capacitor (GSC), thyristor switched
series capacitor (TSSC), and thyristor-controlled series capacitor (TCSC) control schemes for
GSC TSSC and TCSC.
TEXT BOOKS:
1. “N.G. Hingorani and L. Guygi”, Understanding FACTS Devices, IEEE Press
Publications 2000.
2. “Yong- Hua Song, Allan Johns”, Flexible AC Transmission System, IEE Press 1999.
REFERENCE BOOKS:
1. “Kalyan K. Sen and Meylingsen”, Introduction to FACTS Controllers, John wiley&
sons, Inc., Mohamed E. EI – Hawary Series editor, 2009.
2. “K. R Padiyar, Motilal”, FACTS controllers in power transmission and distribution
UK Books of India 2007.

R16 B.TECH EEE.
EE744PE: SPECIAL MACHINES
3 0 0 3
Prerequisite: Electrical Machines - I & Electrical Machines - II
Course objectives:
 To understand the working and construction of special machines
 To know the use of special machines in different feed-back systems
 To understand the use of micro-processors for controlling different machines
Course Outcomes: Upon the completion of this subject, the student will be able
 To select different special machines as part of control system components
 To use special machines as transducers for converting physical signals into electrical
signals
 To use micro-processors for controlling different machines
 To understand the operation of different special machines
UNIT – I
Special Types of DC Machines - I: Series Booster-Shunt Booster-Non-reversible boost-
Reversible booster
Special Types of DC Machines – II: Armature excited machines—Rosenberg generator-
The Amplidyne and metadyne— Rototrol and Regulex-third brush generator-three-wire
generator-dynamometer.
UNIT – II
Stepper Motors: Introduction-synchronous inductor (or hybrid stepper motor), Hybrid
stepping motor, construction, principles of operation, Energisation with two phase at a time-
essential conditions for the satisfactory operation of a 2-phase hybrid step motor- very slow-
speed synchronous motor for servo control-different configurations for switching the phase
windings-control circuits for stepping motors-an open-loop controller for a 2-phase stepping
motor.
UNIT – III
Variable Reluctance Stepping Motors: Variable reluctance ( VR ) Stepper motors, single-
stack VR step motors, Multiple stack VR motors-Open-loop control of 3-phase VR step
motor-closed-Loop control of step motor, discriminator ( or rotor position sensor ) transilator,
major loop-characteristics of step motor in open-loop drive – comparison between open-loop
position control with step motor and a position control servo using a conventional ( dc or ac )
servo motor- Suitability and areas of application of stepper motors-5- phase hybrid stepping
motor-single phase-stepper motor, the construction, operating principle torque developed in
the motor.

R16 B.TECH EEE.
Switched Reluctance Motor: Introduction – improvements in the design of conventional
reluctance motors- Some distinctive differences between SR and conventional reluctance
motors-principle of operation of SRM- Some design aspects of stator and rotor pole arcs,
design of stator and rotor and pole arcs in SR motor-determination of L(θ)--- θ profile –
power converter for SR motor-A numerical example –Rotor sensing mechanism and logic
control, drive and power circuits, position sensing of rotor with Hall problems—derivation of
torque expression, general linear case.
UNIT – IV
Permanent Magnet Materials And Motors: Introduction, Hysteresis loops and recoil line-
stator frames (pole and yoke - part) of conventional PM dc Motors, Equivalent circuit of a
PM-Development of Electronically commutated dc motor from conventional dc motor.
Brushless DC Motor: Types of construction – principle of operation of BLDM- sensing and
switching logic scheme, sensing logic controller, lockout pulses –drive and power circuits,
Base drive circuits, power converter circuit-Theoretical analysis and performance prediction,
modeling and magnet circuit d-q analysis of BLDM -transient analysis formulation in terms
of flux linkages as state variables-Approximate solution for current and torque under steady
state –Theory of BLDM as variable speed synchronous motor ( assuming sinusoidal flux
distribution )- Methods or reducing Torque Pulsations, 180 degrees pole arc and 120 degree
current sheet.
UNIT – V
Linear Induction Motor: Development of a double-sided LIM from rotary type IM- A
schematic of LIM drive for electric traction development of one-sided LIM with back iron-
field analysis of a DSLIM fundamental assumptions.
TEXT BOOKS:
1. K. Venkataratnam, Special electrical machines, university press, 2009.
2. R. K. Rajput - Electrical machines, Laxmi Publications, 5th
Edition 2016.
3. V.V. Athani - Stepper motor: Fundamentals, Applications and Design, New age
International publishers, 1997.
REFERENCE BOOK:
1. “E. G. Janardanan”, Special electrical machines-PHI 2014.

R16 B.TECH EEE.
EE703PC: ELECTRICAL SYSTEMS SIMULATION LAB
0 0 3 2
Prerequisite: Electrical and Electronic circuits, Power System Analysis & Power Electronics
Course Objectives:
 To Simulate and analyse electrical and electronic systems.
 To evaluate the performance of transmission lines.
 To Analyze various Faults in power systems
 To Model, simulate and analyze the performance of DC Machines and Induction
Motors.
 To Analyze performance of feedback and load frequency control of the systems
Course Outcomes: After going through this lab the student will be able to
 Design and Analyze electrical systems in time and frequency domain
 Analyze various transmission lines and perform fault analysis
 Model Load frequency control of Power Systems
 Design various Power Electronic Converters and Drives.
Any ten of the following experiments are required to be conducted using suitable
software
1. Design of first and second order circuits in time and frequency domain
2. Performance evaluation of medium and long transmission lines
3. Symmetrical component analysis
4. Transmission Line Fault Analysis
5. LG, LL and 3-Φ fault analysis of Transformer
6. Short Circuit Analysis of Power system models
7. Speed Control of DC Motor
8. Speed Control of Induction motor
9. Design and analysis of feedback control system
10. Transient analysis of open ended line and short circuited line
11. Load frequency control of single area and two area power system
12. Economic Dispatch of Thermal Units
13. Design of Single Phase and Three Phase Inverters
14. Design of Single Phase and Three Phase Full Converters
Reference Books:
1. C.L. Wadhwa: Electrical Power Systems –Third Edition, New Age International Pub.
Co., 2001.
2. Hadi Sadat: Power System Analysis –Tata Mc Graw Hill Pub. Co. 2002.

R16 B.TECH EEE.
3. “I. J. Nagrath & M. Gopal”, Control Systems Engineering, New Age International
Pub. Co., 5th
Edition 2009.
4. A.E. Clayton & C.I. Hancock Performance and Design of DC Machines, CBS
Publisher, 1st
Edition 2004.

R16 B.TECH EEE.
EE704PC: ELECTRICAL WORKSHOP
0 0 3 2
Prerequisite: Basics of Electrical Engineering
Course Objectives:
 To enhance practical knowledge related to different subjects
 To develop hardware skills such as soldering, winding etc.
 To develop debugging skills.
 To increase ability for analysis and testing of circuits.
 To give an exposure to market survey for available components
 To develop an ability for proper documentation of experimentation.
 To enhance employability of a student.
 To prepare students for working on different hardware projects.
Course Outcomes: After completion of course, student will be able to
 Get practical knowledge related to electrical
 Fabricate basic electrical circuit elements/networks
 Trouble shoot the electrical circuits
 Design filter circuit for application
 Get hardware skills such as soldering, winding etc.
 Get debugging skills.
Group A:
1. Design and fabrication of reactor/ electromagnet for different inductance values.
2. Design and fabrication of single phase Induction/three phase motor stator.
3. Start delta starter wiring for automatic and manual operation.
4. Wiring of distribution box with MCB, ELCB, RCCB and MCCB.
5. Wiring of 40 W tube, T-5, LED, Metal Halide lamps and available latest luminaries.
6. Assembly of various types of contactors with wiring.
7. Assembly of DOL and 3 point starter with NVC connections and overload operation.
Group B: This group consists of electronic circuits which must be assembled and tested
on general purpose PCB or bread boards.
1. Design and development of 5 V regulated power supply.
2. Design and development of precision rectifier.
3. Design and development of first order/ second order low pass/high pass filters with an
application.
4. Microcontroller Interface circuit for temperature/level/speed/current/voltage
measurement.
5. Peak detector using op-amplifiers.
6. Zero crossing detector using op-amplifiers.

R16 B.TECH EEE.
EE851PE: ARTIFICIAL NEURAL NETWORKS AND FUZZY SYSTEMS
(PROFESSIONAL ELECTIVE – V)
B.Tech. IV Year II Sem. L T P C
3 0 0 3
Course Objectives:
 To introduce the basics of Neural Networks and its architectures.
 To introduce the Fuzzy sets and Fuzzy Logic system components
 To deal with the applications of Neural Networks and Fuzzy systems
Course Outcomes: After completion of this course, the students are able
 To understand artificial neural network models and their training algorithms
 To understand the concept of fuzzy logic system components, fuzzification and
defuzzification
 Apply the above concepts to real-world problems and applications.
UNIT – I
Introduction To Neural Networks: Introduction, Humans and Computers, Organization of
the Brain, Biological Neuron, Biological and Artificial Neuron Models, Hodgkin-Huxley
Neuron Model, Integrate-and-Fire Neuron Model, Spiking Neuron Model, Characteristics of
ANN, McCulloch-Pitts Model, Historical Developments, Potential Applications of ANN.
Essentials of Artificial Neural Networks: Artificial Neuron Model, Operations of Artificial
Neuron, Types of Neuron Activation Function, ANN Architectures, Classification Taxonomy
of ANN – Connectivity, Neural Dynamics (Activation and Synaptic), Learning Strategy
(Supervised, Unsupervised, Reinforcement), Learning Rules, Types of Application.
UNIT – II
FeedForward Neural Networks: Single Layer Feed Forward Neural Networks:
Introduction, Perceptron Models: Discrete, Continuous and Multi-Category, Training
Algorithms: Discrete and Continuous Perceptron Networks, Perceptron Convergence
theorem, Limitations of the Perceptron Model, Applications.
Multilayer Feed forward Neural Networks: Credit Assignment Problem, Generalized
Delta Rule, Derivation of Backpropagation (BP) Training, Summary of Backpropagation
Algorithm, Kolmogorov Theorem, Learning Difficulties and Improvements.
UNIT - III
Associative Memories: Paradigms of Associative Memory, Pattern Mathematics, Hebbian
Learning, General Concepts of Associative Memory (Associative Matrix, Association Rules,
Hamming Distance, The Linear Associator, Matrix Memories, Content Addressable
Memory).
Bidirectional Associative Memory (BAM) Architecture, BAM Training Algorithms: Storage
and Recall Algorithm, BAM Energy Function, Proof of BAM Stability Theorem.

R16 B.TECH EEE.
Architecture of Hopfield Network: Discrete and Continuous versions, Storage and Recall
Algorithm, Stability Analysis, Capacity of the Hopfield Network.
UNIT – IV
Classical and Fuzzy Sets: Introduction to classical sets - properties, Operations and
relations; Fuzzy sets, Membership, Uncertainty, Operations, properties, fuzzy relations,
cardinalities, membership functions.
UNIT – V
Fuzzy Logic System: Fuzzification, Membership value assignment, development of rule
base and decision-making system, Defuzzification to crisp sets, Defuzzification methods.
TEXT BOOKS:
1. Rajasekharan and Pai, Neural Networks, Fuzzy logic, Genetic algorithms: synthesis
and applications– PHI Publication, 1st
Edition, 1905
2. Satish Kumar, Neural Networks, TMH, 2004.
REFERENCE BOOKS:
1. “James A Freeman and Davis Skapura”, Neural Networks, Pearson Education, 2002.
2. “Simon Hakins”, Neural Networks, Pearson Education, 3rd
Edition 2008.
3. C. Eliasmith and Ch. Anderson, Neural Engineering, PHI, 2004.

R16 B.TECH EEE.
EE852PE: ELECTRICAL DISTRIBUTION SYSTEMS
3 0 0 3
Prerequisites: Power Systems – I & Power Systems - II
Course Objectives:
 To distinguish between transmission and distribution systems
 To understand design considerations of feeders
 To compute voltage drop and power loss in feeders
 To understand protection of distribution systems
 To examine the power factor improvement and voltage control
Course Outcomes: After completion of this course, the student able to
 distinguish between transmission, and distribution line and design the feeders
 compute power loss and voltage drop of the feeders
 design protection of distribution systems
 understand the importance of voltage control and power factor improvement
UNIT – I
General Concepts: Introduction to distribution system, Distribution system planning,
Factors effecting the Distribution system planning, Load modeling and characteristics.
Coincidence factor - contribution factor - Loss factor - Relationship between the load factor
and loss factor. Load growth, Classification of loads (Residential, commercial, Agricultural
and Industrial) and their characteristics.
Distribution Feeders: Design Considerations of Distribution Feeders: Radial, loop and
network types of primary feeders, Introduction to low voltage distribution systems (LVDS)
and High voltage distribution systems (HVDS), voltage levels, Factors effecting the feeder
voltage level, feeder loading, Application of general circuit constants (A,B,C,D) to radial
feeders, basic design practice of the secondary distribution system, secondary banking,
secondary network types, secondary mains.
UNIT – II
Substations: Location of Substations: Rating of distribution substation, service area with ‘n’
primary feeders. Benefits derived through optimal location of substations. Optimal location
of Substations (Perpendicular bisector rule and X, Y co-ordinate method).
System Analysis: Voltage drop and power-loss calculations: Derivation for voltage drop and
power loss in lines, manual methods of solution for radial networks, three phase balanced
primary lines, analysis of non-three phase systems, method to analyze the distribution feeder
cost.

R16 B.TECH EEE.
UNIT – III
Protection: Objectives of distribution system protection, types of common faults and
procedure for fault calculations, over current Protective Devices: Principle of operation of
Fuses, Auto-Circuit Recloser - and Auto-line sectionalizes, and circuit breakers.
COORDINATION: Coordination of Protective Devices: Objectives of protection co-
ordination, general coordination procedure, Types of protection coordination: Fuse to Fuse,
Auto-Recloser to Fuse, Circuit breaker to Fuse, Circuit breaker to Auto-Recloser.
UNIT – IV
Compensation For Power Factor Improvement: Capacitive compensation for power-factor
control - Different types of power capacitors, shunt and series capacitors, effect of shunt
capacitors (Fixed and switched), effect of series capacitors, difference between shunt and
series capacitors, Calculation of Power factor correction, capacitor allocation - Economic
justification of capacitors - Procedure to determine the best capacitor location.
UNIT – V
Voltage Control: Voltage Control: Importance of voltage control, methods of voltage
control, Equipment for voltage control, effect of shunt capacitors, effect of series capacitors,
effect of AVB/AVR on voltage control, line drop compensation, voltage fluctuations.
TEXT BOOKS:
1. Turan Gonen, Electric Power Distribution System Engineering, CRC Press, 3rd
Edition 2014.
2. V. Kamaraju, Electrical Power Distribution Systems, Tata Mc Graw Hill Publishing
Company, 2nd
edition, 2010.
REFERENCE BOOKS:
1. G. Ram Murthy, Electrical Power Distribution hand book, 2nd
edition, University
press 2004.
2. A.S. Pabla, Electric Power Distribution, Tata McGraw Hill Publishing company, 6th
edition, 2013.

R16 B.TECH EEE.
EE853PE: WIND, SOLAR AND HYBRID ENERGY SYSTEMS
3 0 0 3
Prerequisite: Renewable Energy Systems
Course Objectives:
 To study the physics of wind power and energy
 To understand the principle of operation of wind generators
 To know the solar power resources
 To analyze the solar photo-voltaic cells
 To discuss the solar thermal power generation
 To identify the network integration issues
Course Outcomes: At the end of this course, students will demonstrate the ability to
 Understand the energy scenario and the consequent growths of the power generate
renewable energy sources.
 Understand the basic physics of wind and solar power generation.
 Understand the power electronic interfaces for wind and solar generation.
 Understand the issues related to the grid-integration of solar and wind energy systems
UNIT - I
PHYSICS OF WIND POWER
History of wind power, Indian and Global statistics, Wind physics, Betz limit ratio, stall and
pitch control, Wind speed statistics-probability distributions, and Wind power-cumulative
distribution functions.
UNIT - II
WIND GENERATOR TOPOLOGIES
Review of modern wind turbine technologies, Fixed and Variable speed wind turbine,
Induction Generators, Doubly-Fed Induction Generators and their characteristics, Permanent
Magnet Synchronous Generators, Power electronics converters. Generator configurations,
Converter Control.
UNIT - III
THE SOLAR RESOURCE
Introduction, solar radiation spectra, solar geometry, Earth Sun angles, observer Sun angles,
solar day length, Estimation of solar energy availability.

R16 B.TECH EEE.
SOLAR PHOTOVOLTAIC
Technologies-Amorphous, mono-crystalline, polycrystalline; V-I characteristics of a PV cell,
PV module, array, Power Electronic Converters for Solar Systems, Maximum Power point
Tracking (MPPT) algorithms. Converter Control.
UNIT - IV
SOLAR THERMAL POWER GENERATION
Technologies, Parabolic trough, central receivers, parabolic dish, Fresnel, solar pond,
elementary analysis
UNIT - V
NETWORK INTEGRATION ISSUES
Overview of grid code technical requirements. Fault ride-through for wind farms - real and
reactive power regulation, voltage and frequency operating limits, solar PV and wind farm
behavior during grid disturbances. Power quality issues. Power system interconnection
experiences in the world. Hybrid and isolated operations of solar PV and wind systems.
TEXT BOOKS:
1. T. Ackermann, “Wind Power in Power Systems”, John Wiley and Sons Ltd., 2005.
2. G. M. Masters, “Renewable and Efficient Electric Power Systems”, John Wiley and
Sons, 2004.
REFERENCES:
1. S. P. Sukhatme, “Solar Energy: Principles of Thermal Collection and Storage”,
McGraw Hill, 1984.
2. H. Siegfried and R. Waddington, “Grid integration of wind energy conversion
systems” John Wiley and Sons Ltd., 2006.
3. G. N. Tiwari and M. K. Ghosal, “Renewable Energy Applications”, Narosa
Publications, 2004.
4. J. A. Duffie and W. A. Beckman, “Solar Engineering of Thermal Processes”, John
Wiley & Sons, 1991.

R16 B.TECH EEE.
EE854PE: HIGH VOLTAGE ENGINEERING
3 0 0 3
Prerequisite: Power Systems – I, Electromagnetic Field theory
Course Objectives:
 To deal with the detailed analysis of Breakdown occurring in gaseous, liquids and
solid dielectrics
 To inform about generation and measurement of High voltage and current
 To introduce High voltage testing methods
 Acquire knowledge on, basics of high voltage engineering
 understand break-down phenomenon in different types of dielectrics
 understand generation and measurement of high voltages and currents
 understand the phenomenon of over-voltages, concept of insulation co-ordination
 know testing of various materials and electrical apparatus used in high voltage
engineering
UNIT – I
Introduction To High Voltage Technology And Applications: Electric Field Stresses, Gas
/ Vacuum as Insulator, Liquid Dielectrics, Solids and Composites, Estimation and Control of
Electric Stress, Numerical methods for electric field computation, Surge voltages, their
distribution and control, Applications of insulating materials in transformers, rotating
machines, circuit breakers, cable power capacitors and bushings.
UNIT – II
Break Down In Gaseous And Liquid Dielectrics: Gases as insulating media, collision
process, Ionization process, Townsend’s criteria of breakdown in gases, Paschen’s law -
Liquid as insulator, pure and commercial liquids - breakdown in pure and commercial
liquids.
Break Down In Solid Dielectrics: Intrinsic breakdown, electromechanical breakdown,
thermal breakdown, breakdown of solid dielectrics in practice, Breakdown in composite
dielectrics, solid dielectrics used in practice.
UNIT – III
Generation of High Voltages And Currents: Generation of High Direct Current Voltages,
Generation of High alternating voltages, Generation of Impulse Voltages, Generation of
Impulse currents, Tripping and control of impulse generators.
Measurement Of High Voltages And Currents: Measurement of High Direct Current
voltages, Measurement of High Voltages alternating and impulse, Measurement of High

R16 B.TECH EEE.
Currents-direct, alternating and Impulse, Oscilloscope for impulse voltage and current
measurements.
UNIT – IV
Non-Destructive Testing of Material and Electrical Apparatus: Measurement of D.C
Resistivity, Measurement of Dielectric Constant and loss factor, Partial discharge
measurements.
High Voltage Testing of Electrical Apparatus: Testing of Insulators and bushings, Testing
of Isolators and circuit breakers, testing of cables, Testing of Transformers, Testing of Surge
Arresters, and Radio Interference measurements.
UNIT – V
Over Voltage Phenomenon and Insulation Co-Ordination: Natural causes for over
voltages – Lightning phenomenon, Overvoltage due to switching surges, system faults and
other abnormal conditions, Principles of Insulation Coordination on High voltage and Extra
High Voltage power systems.
TEXT BOOKS:
1. M. S. Naidu and V. Kamaraju, High Voltage Engineering by– TMH Publications, 4th
Edition 2009.
2. E. Kuffel, W. S. Zaengl, J. Kuffel, High Voltage Engineering: Fundamentals by
Elsevier, 2nd
Edition 2000.
REFERENCE BOOKS:
1. C. L. Wadhwa, High Voltage Engineering by, New Age Internationals (P) Limited,
1997.
2. Ravindra Arora, Wolfgang Mosch, High Voltage Insulation Engineering by, New Age
International (P) Limited, 1995.
3. “Mazen Abdel Salam, Hussein Anis, Ahdan El-Morshedy and Roshdy Radwan”,
High Voltage Engineering, Theory and Practice, CRC Press, 2nd
Edition 2000.

R16 B.TECH EEE.
EM851PE/EE861PE: VLSI DESIGN
(PROFESSIONAL ELECTIVE – VI)
3 0 0 3
Course Objectives: The objectives of the course are to:
 Give exposure to different steps involved in the fabrication of ICs using MOS
transistor, CMOS/BICMOS transistors, and passive components.
 Explain electrical properties of MOS and BiCMOS devices to analyze the behavior of
inverters designed with various loads.
 Give exposure to the design rules to be followed to draw the layout of any logic
circuit.
 Provide concept to design different types of logic gates using CMOS inverter and
analyze their transfer characteristics.
 Provide design concepts to design building blocks of data path of any system using
gates.
 Understand basic programmable logic devices and testing of CMOS circuits.
Course Outcomes: Upon successfully completing the course, the student should be able to:
 Acquire qualitative knowledge about the fabrication process of integrated circuit
using MOS transistors.
 Choose an appropriate inverter depending on specifications required for a circuit
 Draw the layout of any logic circuit which helps to understand and estimate parasitic
of any logic circuit
 Design different types of logic gates using CMOS inverter and analyze their transfer
characteristics
 Provide design concepts required to design building blocks of data path using gates.
 Design simple memories using MOS transistors and can understand design of large
memories.
 Design simple logic circuit using PLA, PAL, FPGA and CPLD.
 Understand different types of faults that can occur in a system and learn the concept
of testing and adding extra hardware to improve testability of system
UNIT – I
Introduction: Introduction to IC Technology – MOS, PMOS, NMOS, CMOS & BiCMOS
Basic Electrical Properties: Basic Electrical Properties of MOS and BiCMOS Circuits: Ids-
Vds relationships, MOS transistor threshold Voltage, gm, gds, Figure of merit ωo; Pass
transistor, NMOS Inverter, Various pull ups, CMOS Inverter analysis and design, Bi-CMOS
Inverters.
UNIT - II
VLSI Circuit Design Processes: VLSI Design Flow, MOS Layers, Stick Diagrams, Design
Rules and Layout, 2 μm CMOS Design rules for wires, Contacts and Transistors Layout
Diagrams for NMOS and CMOS Inverters and Gates, Scaling of MOS circuits.

R16 B.TECH EEE.
UNIT – III
Gate Level Design: Logic Gates and Other complex gates, Switch logic, Alternate gate
circuits, Time delays, Driving large capacitive loads, Wiring capacitance, Fan – in, Fan – out,
Choice of layers.
UNIT - IV
Data Path Subsystems: Subsystem Design, Shifters, Adders, ALUs, Multipliers, Parity
generators, Comparators, Zero/One Detectors, Counters.
Array Subsystems: SRAM, DRAM, ROM, Serial Access Memories.
UNIT - V
Programmable Logic Devices: PLAs, FPGAs, CPLDs, Standard Cells, Programmable
Array Logic, Design Approach, Parameters influencing low power design.
CMOS Testing: CMOS Testing, Need for testing, Test Principles, Design Strategies for test,
Chip level Test Techniques.
TEXT BOOKS:
1. Essentials of VLSI circuits and systems – Kamran Eshraghian, Eshraghian Dougles
and A. Pucknell, PHI, 2005 Edition
2. CMOS VLSI Design – A Circuits and Systems Perspective, Neil H. E Weste, David
Harris, Ayan Banerjee, 3rd
Ed, Pearson, 2009.
REFERENCE BOOKS:
1. CMOS logic circuit Design - John. P. Uyemura, Springer, 2007.
2. Modern VLSI Design - Wayne Wolf, Pearson Education, 3rd Edition, 1997.

R16 B.TECH EEE.
EE862PE: SMART ELECTRIC GRID
3 0 0 3
Prerequisite: Power Systems - II & Electrical Distribution Systems
Course Objectives:
 To group various aspects of the smart grid
 To defend smart grid design to meet the needs of a utility
 To select issues and challenges that remain to be solved
 To analyze basics of electricity, electricity generation, economics of supply and
demand, and the various aspects of electricity market operations in both regulated and
deregulated environment.
Course Outcomes: Upon the completion of the subject, the student will be able to
 Recite the structure of an electricity market in either regulated or deregulated market
conditions.
 Understand the advantages of DC distribution and developing technologies in
distribution
 Discriminate the trade-off between economics and reliability of an electric power
system, differentiate various investment options (e.g. generation capacities,
transmission, renewable, demand-side resources, etc) in electricity markets
 Analyze the development of smart and intelligent domestic systems.
UNIT – I
Introduction: Introduction to smart grid- Electricity Network-Local energy networks-
Electric transportation- Low carbon central generation-Attributes of the smart grid- Alternate
views of a smart grid.
Smart Grid to Evolve a Perfect Power System: Introduction- Overview of the perfect
power system configurations- Device level power system- Building integrated power
systems- Distributed power systems- Fully integrated power system-Nodes of innovation.
UNIT – II
DC Distribution and Smart Grid: AC vs DC sources-Benefits of and drives of DC power
delivery systems-Powering equipment and appliances with DC-Data centers and information
technology loads-Future Neighbourhood-Potential future work and research.
Intelligrid Architecture for the Smart grid: Introduction- Launching intelligrid- Intelligrid
today- Smart grid vision based on the intelligrid architecture-Barriers and enabling
technologies. SCADA, synchro phasors (WAMS)

R16 B.TECH EEE.
UNIT – III
Dynamic Energy Systems Concept: Smart energy efficient end use devices-Smart
distributed energy resources-Advanced whole building control systems- Integrated
communications architecture-Energy management-Role of technology in demand response-
Current limitations to dynamic energy management-Distributed energy resources-Overview
of a dynamic energy management-Key characteristics of smart devices- Key characteristics
of advanced whole building control systems-Key characteristics of dynamic energy
management system.
UNIT – IV
Energy Port As Part Of The Smart Grid: Concept of energy -Port, generic features of the
energy port. Policies and Programs to Encourage End – Use Energy Efficiency: Policies
and programs in action -multinational - national-state-city and corporate levels.
Market Implementation: Framework-factors influencing customer acceptance and response
- program planning-monitoring and evaluation.
UNIT – V
Efficient Electric End – Use Technology Alternatives: Existing technologies – lighting -
Space conditioning - Indoor air quality - Domestic water heating - hyper efficient appliances -
Ductless residential heat pumps and air conditioners - Variable refrigerant flow air
conditioning-Heat pump water heating - Hyper efficient residential appliances - Data center
energy efficiency- LED street and area lighting - Industrial motors and drives - Equipment
retrofit and replacement - Process heating - Cogeneration, Thermal energy storage - Industrial
energy management programs - Manufacturing process-Electro-technologies, Residential,
Commercial and industrial sectors.
TEXT BOOKS:
1. Clark W Gellings, “The Smart Grid, Enabling Energy Efficiency and Demand Side
Response”- CRC Press, 2009.
2. Jean Claude Sabonnadiere, Nouredine Hadjsaid, “Smart Grids”, Wiley-ISTE, IEEE
Press, May 2012.
REFERENCE BOOKS:
1. Janaka Ekanayake, Kithsiri Liyanage, Jianzhong. Wu, Akihiko Yokoyama, Nick
Jenkins, “Smart Grid: Technology and Applications”- Wiley, 2012.
2. James Momoh, “Smart Grid: Fundamentals of Design and Analysis”-Wiley, IEEE
Press, 2012.

R16 B.TECH EEE.
EE863PE: UTILIZATION OF ELECTRIC POWER
3 0 0 3
Prerequisite: Electrical Machines-I & Electrical Machines-II
Course Objectives:
 To understand the fundamentals of illumination and good lighting practices
 To understand the methods of electric heating and welding.
 To understand the concepts of electric drives and their application to electrical
traction systems.
 Acquire knowledge on, electric drives characteristics and their applicability in
industry based on the nature of different types of loads and their characteristics
 understands the concepts and methods of electric heating, welding, illumination and
electric traction
 apply the above concepts to real-world electrical and electronics problems and
applications.
UNIT – I
Electric Drives: Type of electric drives, choice of motor, starting and running characteristics,
speed control, temperature rise, particular applications of electric drives, types of industrial
loads, continuous, intermittent and variable loads, load equalization.
UNIT – II
Electric Heating: Advantages and methods of electric heating, resistance heating induction
heating and dielectric heating.
Electric Welding: Electric welding, resistance and arc welding, electric welding equipment,
comparison between A.C. and D.C. Welding.
UNIT – III
Illumination: Introduction, terms used in illumination, laws of illumination, polar curves,
photometry, integrating sphere, sources of light.
Various Illumination Methods: Discharge lamps, MV and SV lamps – comparison between
tungsten filament lamps and fluorescent tubes, Basic principles of light control, Types and
design of lighting and flood lighting.
UNIT – IV
Electric Traction – I: System of electric traction and track electrification. Review of existing
electric traction systems in India. Special features of traction motor, methods of electric
braking-plugging rheostat braking and regenerative braking.

R16 B.TECH EEE.
Mechanics of train movement. Speed-time curves for different services – trapezoidal and
quadrilateral speed time curves.
UNIT – V
Electric Traction-II: Calculations of tractive effort, power, specific energy consumption for
given run, effect of varying acceleration and braking retardation, adhesive weight and
coefficient of adhesion.
TEXT BOOKS:
1. E. Openshaw Taylor, Utilisation of Electric Energy – by University press, 1961.
2. Partab, H., 'Art and Science of Utilisation of Electrical Energy', Dhanpat Rai and
Sons, New Delhi, 1986.
REFERENCE BOOKS:
1. N. V. Suryanarayana, Utilization of Electrical Power including Electric drives and
Electric traction, New Age International (P) Limited, Publishers, 1996.
2. C. L. Wadhwa, Generation, Distribution and Utilization of electrical Energy, New
Age International (P) Limited, Publishers, 1997.
3. Tripathy, S.C., 'Electric Energy Utilisation and Conservation', Tata McGraw Hill
Publishing Company Ltd. New Delhi, 1991.

R16 B.TECH EEE.
EE864PE: ELECTRIC AND HYBRID VEHICLES
3 0 0 3
Prerequisite: Power Semiconductor Drives, Electrical Drives and Control, Utilization of
Electric Power
Course Objectives:
 To understand the fundamental concepts, principles, analysis and design of hybrid and
electric vehicles.
 To know the various aspects of hybrid and electric drive train such as their
configuration, types of electric machines that can be used energy storage devices, etc.
Course Outcomes: At the end of this course, students will demonstrate the ability to
 Understand the models to describe hybrid vehicles and their performance.
 Understand the different possible ways of energy storage.
 Understand the different strategies related to energy storage systems.
UNIT - I
INTRODUCTION
Conventional Vehicles: Basics of vehicle performance, vehicle power source
characterization, transmission characteristics, mathematical models to describe vehicle
performance.
UNIT - II
INTRODUCTION TO HYBRID ELECTRIC VEHICLES
History of hybrid and electric vehicles, social and environmental importance of hybrid and
electric vehicles, impact of modern drive-trains on energy supplies.
HYBRID ELECTRIC DRIVE-TRAINS: Basic concept of hybrid traction, introduction to
various hybrid drive-train topologies, power flow control in hybrid drive-train topologies,
fuel efficiency analysis.
UNIT - III
ELECTRIC TRAINS
Electric Drive-trains: Basic concept of electric traction, introduction to various electric drive
train topologies, power flow control in electric drive-train topologies, fuel efficiency analysis.
ELECTRIC PROPULSION UNIT: Introduction to electric components used in hybrid and
electric vehicles, Configuration and control of DC Motor drives, Configuration and control of
Induction Motor drives, configuration and control of Permanent Magnet Motor drives,
Configuration and control of Switch Reluctance Motor drives, drive system efficiency.

R16 B.TECH EEE.
UNIT - IV
ENERGY STORAGE
Energy Storage: Introduction to Energy Storage Requirements in Hybrid and Electric
Vehicles, Battery based energy storage and its analysis, Fuel Cell based energy storage and
its analysis, Super Capacitor based energy storage and its analysis, Flywheel based energy
storage and its analysis, Hybridization of different energy storage devices. Sizing the drive
system: Matching the electric machine and the internal combustion engine (ICE), Sizing the
propulsion motor, sizing the power electronics, selecting the energy storage technology,
Communications, supporting subsystems
UNIT-V:
ENERGY MANAGEMENT STRATEGIES
Energy Management Strategies: Introduction to energy management strategies used in hybrid
and electric vehicles, classification of different energy management strategies, comparison of
different energy management strategies, implementation issues of energy management
strategies.
CASE STUDIES: Design of a Hybrid Electric Vehicle (HEV), Design of a Battery Electric
Vehicle (BEV).
TEXT BOOKS:
1. C. Mi, M. A. Masrur and D. W. Gao, “Hybrid Electric Vehicles: Principles and
Applications with Practical Perspectives”, John Wiley & Sons, 2011.
2. S. Onori, L. Serrao and G. Rizzoni, “Hybrid Electric Vehicles: Energy Management
Strategies”, Springer, 2015.
REFERENCES:
1. M. Ehsani, Y. Gao, S. E. Gay and A. Emadi, “Modern Electric, Hybrid Electric, and
Fuel Cell Vehicles: Fundamentals, Theory, and Design”, CRC Press, 2004.
2. T. Denton, “Electric and Hybrid Vehicles”, Routledge, 2016.

R16 b.techeeeiv yearrevisedsyllabus

More Related Content

What's hot (16)

Similar to R16 b.techeeeiv yearrevisedsyllabus (20)

Recently uploaded (20)

R16 b.techeeeiv yearrevisedsyllabus