GeoVision : CCTV Solutions : Recording issue with Bosch IP Camera
0 likes484 views
When connecting Bosch IP cameras to a GV-System, videos would not record due to the i-frame distance default setting being set to zero in the Bosch camera web interface. To resolve this, the i-frame distance setting must be adjusted to a value between 1-30 in the Bosch camera encoder settings page to ensure proper recording.
GeoVision : CCTV Solutions : Recording issue with Bosch IP Camera
- 1. Failing to Record Videos When You connect Bosch’s IP Cameras to the GV-System Article ID: V20-10-03-29 Release Date: 03/29/2010 Applied to GV-System Symptom When connecting Bosch’s IP cameras to the GV-System, you can not record videos through the GV-System. Cause The symptom occurred because the default setting of i-frame distance on Bosch’s Web interface is set to be zero. Therefore, there is no frame or image to be recorded through the GV-System. GeoVision Inc. 1 Revision Date: 03/29/2010
- 2. Resolution Go to Bosch’s Web interface and set a value for i-frame distance. To set the i-frame distance value, follow the steps below: 1. Go to Bosch’s Web interface, click SETTINGS and then select the encoder you are using from the Encoder settings. This page appears. 2. Select a Profile and then click the Details button. The detailed settings are displayed. GeoVision Inc. 2 Revision Date: 03/29/2010
- 3. 3. Type a value in the i-frame distance box. It is recommended to set the value between 1 and 30. Note: If you set the value to be 1, there will be 30 key frames to be recorded per second. If you set the value to be 30, there will be one key frame to be recorded per second. Therefore, the lower the value, the clearer the image. But the clearer the image, the bigger the file size. 4. Click Set. You can start to record video files through the GV-System. GeoVision Inc. 3 Revision Date: 03/29/2010