![References:
• Karen coyle,”management of RFID in libraries”,preprint version
of article published in the journal of academic
librarianship.v.31.5.pp.486-489
• K.Finkenzeller, RFID handbook 3rd ed.,wiley 2010
• K.Fujisaki “the implementation of RFID technology in the
library and electromagnetic compatibility“ [in
japanese],monthly EMC,183,86-94.](https://image.slidesharecdn.com/rfid01lmsystem12-171020172032/85/RFID-Based-Library-Management-System-18-320.jpg)
RFID Based Library Management System
- 1. Department of Electronics and Communication Engineering M.V.S.R. ENGINEERING COLLEGE (Affiliated to Osmania University & Recognized by AICTE) Nadergul, Saroor Nagar Mandal, Hyderabad – 501 510 2017-18. A Project Review on RFID Based Library management system
- 2. RFID • Radio frequency identification technology that uses radio-frequency waves to transfer data between a reader and a movable item to identify ,categorize ,track..
- 3. WHY RFID FOR LIBRARY? • Fast, efficient ways • Efficient Book circulation management • Automatic Check-in and Check-out • Library inventory tracking in minutes instead of hours • Multiple books can be read simultaneously • Unique ID of the RFID tag prevents counterfeiting
- 4. RFID Based Library Management System
- 5. Technical specifications Software: • Embedded ‘C’ • RIDE To Write Code • At89c52 ISP To Burn The Chip Hardware: • At89c52 Based Our Own Developed Board • Power Supply • RFID Reader • EEPROM • LCD,Buzzer,LED
- 6. Block Diagram of Tag system in library
- 7. Reader • It is a device used to read a tag. • Basic components are 1. A scanning Antenna 2. A transceiver with a decoder Handheld reader
- 8. Internal Structure Of Reader At89C52
- 9. RFID Reader Moule • RFID Reader Module, are also called as interrogators. They convert radio waves returned from the RFID tag into a form that can be passed on to Controllers, which can make use of it.
- 10. MAX 232 • It is an integrated circuit which converts the signals from the RS232 serial port to the proper signal which are used in the TTL compatible digital logic circuits.
- 11. RFID Module Selection • RFID module is selected based on the following parameters: • Type EX: to read and write • Maximum clock frequency • range • supply current • supply voltage
- 12. Tag Tags are made of these parts 1.Chips : hold information about physical object 2.Antenna:It produces radio signals to activate the tag and read and write data to it. 3.Package:encases the chips and antenna ,so that the tag can be attached to the physical object.
- 13. RFID Tags
- 14. Types of RF Tags
- 15. RFID For Campus • Common ID-card • Attendance and Access control. • Instant access to student information • Vehicle tracking, Parking & Locker management and transportation facilities. • E-wallet. • Event Management
- 16. Benefits • Time saving • Fast accessing of books • Improved services • Security • Low Cost, Automated Operation, Low Power Consumption.
- 17. • RFID technology is taking off in libraries at an increasingly rapid pace. It is easy to envision that, the RFID tag contents will increase in power, prices are expected to decline and tag will dramatically improve its efficiency, security and accuracy. CONCLUSION
- 18. References: • Karen coyle,”management of RFID in libraries”,preprint version of article published in the journal of academic librarianship.v.31.5.pp.486-489 • K.Finkenzeller, RFID handbook 3rd ed.,wiley 2010 • K.Fujisaki “the implementation of RFID technology in the library and electromagnetic compatibility“ [in japanese],monthly EMC,183,86-94.