RT2 Profiler PCR Arrays: Pathway-focused Gene Expression Profiling with qRT-PCR - Download the Article
2 likes1,257 views
The document describes the rt2 Profiler PCR array system, a technology that combines real-time PCR and microarray capabilities for profiling gene expression in biological research, focusing specifically on 84 genes related to certain pathways or diseases. It outlines the system's components, including primer assays and master mixes, which ensure specificity, sensitivity, and reproducibility across different gene analyses. Additionally, the document highlights the ease of use and accessibility of the system in laboratory settings, as well as its application in various research fields like cancer studies and cytokine monitoring.
![6 www.qiagen.com QIAGEN
Table 2. Features of the complete RT2
Profiler PCR Array system
Array
design
84 pathway-focused genes
5 housekeeping genes
1 Genomic DNA control
3 Reverse Transcription Controls (RTC)
3 Positive PCR controls (PPC)
Primer
design
Specificity: sequence alignment filter
Uniformity: consistent melting and annealing temperatures
Efficiency: short amplicon sequence
Master
Mix
Instrument-specific SYBR Green formulations
Supports all ABI, Bio-Rad, MJ Research, and Stratagene
platforms
Hot start enzyme:
No extension of nonspecific priming events
No amplification of secondary products like primer dimers
First
strand
synthesis
Optimized gDNA elimination buffer prevents false positive signals
Built-in External RNA Control to test for inhibitors of RT
RT² Profiler PCR Array performance:
Sensitivity
Researchers continually attempt to detect genes at ever lower
levels of expression and in ever smaller amounts of total RNA. To
meet these needs, the RT² Profiler PCR Array System must pass a
very stringent test of sensitivity. A wide variety of universal RNA
amounts were characterized with the RT² Profiler PCR Array
System and an array representing inflammatory cytokine and
receptor genes that are known to be expressed at very low levels.
Figure 3 plots the percent positive call (the percentage of genes
with CT
<35) versus the amount of input RNA. The results indicate
that the RT² Profiler PCR Array System achieves greater than 80
percent positive calls with input total RNA amounts as low as 1
ng per array plate. For other pathways or gene panels expressed
at higher levels, the sensitivity of the system may be further
improved, potentially yielding high positive call rates with even
lower amounts of input total RNA. However, the recommended
amount of input RNA for first-time users is 1.0 µg to assure a
maximum number of positive calls.
0
20
40
60
80
100
120
50100 11025
Percentpositivecall(%)
Input RNA [ng]
0
0.05
0.1
0.15
0.2
0.25
0.3
Percentincreasepositivecallrate(%)
0.35
0.4
Unamplified
PreAMP
% Increase in positive call rate
Figure 3. RT² Profiler PCR Arrays detect as little as 1 ng RNA. Different amounts of
universal total RNA were characterized using the Human Inflammatory Cytokines
and Receptors PCR Array (PAHS-011) with or without preamplification. The
percentage of detectable genes was calculated for each RNA amount, with or
without preamplification using the RT2
PreAMP cDNA Synthesis Kit. The percentage of
detectable genes was calculated for each RNA amount and the new pathway-focused
PreAMP technology was found to enable detection with as little as 1 ng RNA.
Specificity
The RT² Profiler PCR Array System has been designed and optimized
for the SYBR Green detection method used by most real-time systems,
making RT² Profiler PCR Arrays very flexible and widely applicable.
Concerns have been raised over the specificity of SYBR Green
detection and its ability to amplify only one gene-specific amplicon
product, because it detects double-stranded DNA nonspecifically.
Our experimentally verified primer design algorithm, used for the
RT² Profiler PCR Arrays, guarantees the generation of single, gene-
specific amplicons without the co-amplification of primer dimers or
other nonspecific secondary products.
For an example of a stringent test of RT² Profiler PCR Array
specificity, we characterized the real-time PCR dissociation curves
of each gene on a RT² Profiler PCR Array representing highly
homologous members of the TGFβ and Bone Morphogenetic
Protein (BMP) gene families. Products were also characterized by
agarose gel electrophoresis. Figure 4 displays the representative
dissociation curves and the agarose gel results for the BMP gene
family. Each dissociation curve contains only one peak, and each
agarose gel lane contains only one band of the predicted size. The
results indicate that the RT² Profiler PCR Array amplifies gene-specific
products despite the expression of highly homologous members of
the same gene family in the same RNA sample. The optimized RT²
Profiler PCR Array System now brings a level of specificity to SYBR
Green detection that most thought could be achieved only by more
expensive probe-based methods.](https://image.slidesharecdn.com/rt2profilerpcrarrayspathway-focusedgeneexpressionprofilingwithqrt-pcr-170113085837/85/RT2-Profiler-PCR-Arrays-Pathway-focused-Gene-Expression-Profiling-with-qRT-PCR-Download-the-Article-6-320.jpg)
![7www.qiagen.comRT2
Profiler PCR Arrays:
Pathway-focused gene expression profiling with qRT-PCR
BMP1 BMP2 BMP3 BMP4 BMP5 BMP6 BMP7 BMP15
Fluorescence
0
20
40
60
80
100
60 70 80 90
BMP1
88.6
Fluorescence
0
20
40
60
80
100
60 70 80 90
BMP2
89.78
Fluorescence
0
20
40
60
80
100
60 70 80 90
BMP3
90.88
Fluorescence
0
20
40
60
80
100
60 70 80 90
BMP4 84.35
Fluorescence
0
20
40
60
80
100
60 70 80 90
BMP5 82.28
Fluorescence
0
20
40
60
80
100
60 70 80 90
BMP6
83.87
Fluorescence
0
20
40
60
80
100
60 70 80 90
BMP7 87.2
Fluorescence
0
20
40
60
80
100
60 70 80 90
BMP15
86.17
Single dissociation curvesA
B
Tm [°C]
Tm [°C]
Tm [°C]
Tm [°C]
Tm [°C]
Tm [°C]
Tm [°C]
Tm [°C]
Figure 4. High specificity with the RT² Profiler PCR Array System. RT2
Profiler
PCR Arrays demonstrate a high degree of specificity for target genes. XpressRef
Human Universal Total RNA (5 µg) was characterized on the Human TGFβ/BMP
Signaling Pathway RT² Profiler PCR Array using the RT2
SYBR Green/Fluorescein
qPCR Mastermix on the Bio-Rad iCycler instrument. After a standard melting curve
program, dissociation curves were obtained (Panel A), and the products were
characterized by agarose gel electrophoresis (Panel B).
Reproducibility
The quantitative nature of real-time PCR should impart a high
degree of reproducibility onto the RT² Profiler PCR Array
System. To test this reproducibility, two different end-users
characterized, in technical replicates (n = 4), the same universal
total RNA sample, each with two separate manufacturing lots
of a cataloged RT² Profiler PCR Array on two separate days.
The raw threshold cycle values for the entire array’s gene panel
were then compared between each user’s replicates and all
four of the other user’s replicates. Figure 5 displays the resulting
scatter plots and correlation coefficients. Each comparison
yields the predicted ideals of straight lines with slopes of 1.0
and correlation coefficients of 0.99 or greater. The results
demonstrate the high degree of plate-to-plate, run-to-run, and
replicate-to-replicate reproducibility inherent in the RT² Profiler
PCR Arrays System technology, even at the level of raw data.
A
B
CT from User B
CTfromUserA
B1 B4B3B2
A1A4A3A2
User-to-user reproducibility
A1 A2 A3 A4
0.993 0.989 0.995 0.992
0.994 0.990 0.995 0.992
0.992 0.990 0.993 0.992
0.993 0.992 0.994 0.992
B1
B2
B3
B4
Correlation coefficients (R values)
Figure 5. High user-to-user reproducibility. The RT² Profiler PCR Array System
demonstrates a high degree of user-to-user reproducibility. Two different end-users
characterized template cDNA prepared from Human XpressRef Universal Total
RNA (5.0 µg) in technical quadruplicates using the Human Drug Metabolism RT²
Profiler PCR Array and the RT2
SYBR Green/Fluorescein qPCR Mastermix on the
Bio-Rad iCycler. Panel A compares the raw threshold cycle values of the array’s
gene panel as determined by each of the first end-user’s replicates versus each
of the second end-user’s replicates. Panel B lists the correlation coefficient of the
linear curve fit for each scatter plot comparison.](https://image.slidesharecdn.com/rt2profilerpcrarrayspathway-focusedgeneexpressionprofilingwithqrt-pcr-170113085837/85/RT2-Profiler-PCR-Arrays-Pathway-focused-Gene-Expression-Profiling-with-qRT-PCR-Download-the-Article-7-320.jpg)
RT2 Profiler PCR Arrays: Pathway-focused Gene Expression Profiling with qRT-PCR - Download the Article
- 1. 1www.qiagen.comRT2 Profiler PCR Arrays: Pathway-focused gene expression profiling with qRT-PCR RT2 Profiler PCR Arrays: Pathway-focused gene expression profiling with qRT-PCR Emi Arikawa, George Quellhorst, Ying Han, Hongguang Pan, and Jingping Yang QIAGEN, 6951 Executive Way, Frederick, Maryland 21703, USA Scientific article Abstract: This paper evaluates the performance of the newest technique for monitoring the expression of a panel of pathway- or disease-specific genes: the RT2 Profiler PCR Array System. The RT2 Profiler PCR Array System combines the quantitative performance of SYBR® Green real-time PCR with the multiple-gene profiling capabilities of a microarray. The RT2 Profiler PCR Array is a 96- or 384-well plate containing RT2 qPCR Primer Assays for a set of 84 related genes, plus 5 housekeeping genes and 3 controls. The complete system includes an instrument-specific master mix and an optimized first strand synthesis kit. This paper presents experimental data showing that RT2 Profiler PCR Arrays have the sensitivity, reproducibility, and specificity expected from real-time PCR techniques. As a result, this technology brings focused gene expression profiling to any biological laboratory setting with a real-time PCR instrument. Introduction The RT2 Profiler PCR Array System is the most reliable and accurate tool for analyzing the expression of a focused panel of genes using SYBR Green real-time PCR. This system brings together the quantitative performance of real-time PCR and the multiple-gene profiling capability of microarrays. Each RT2 Profiler PCR Array profiles the expression of 84 genes relevant to a specific pathway or disease state. Expression levels are measured by gene-specific RT2 qPCR Primer Assays optimized for simultaneous use in the RT2 Profiler PCR Array System. RT2 qPCR Primer Assays are key components in the RT2 Profiler PCR Array System. Each qPCR assay on the array is uniquely designed for use in SYBR Green real-time PCR analysis. The assay design criteria ensure that each qPCR reaction will generate single, gene- specific amplicons and prevent the co-amplification of nonspecific products. The qPCR assays used in RT2 Profiler PCR Arrays are optimized to work under standard conditions, enabling a large number of genes to be assayed simultaneously. Their specificity is guaranteed when RT2 SYBR Green qPCR Mastermixes are used as part of the complete RT2 Profiler PCR Array System protocol. Contents Introduction.....................................................1 Experimental protocol.......................................2 RT2 Profiler PCR Array design and gene content..3 Pathway-focused RT2 Profiler PCR Arrays............4 Customized RT2 Profiler PCR Arrays...................4 The complete RT2 Profiler PCR Array System: Why the RT2 Profiler PCR Array System works Component 1: RT2 PCR Primer Assays.................................4 Component 2: RT2 qPCR Mastermixes.................................5 Component 3: RT2 First Strand Kit.......................................5 RT2 Profiler PCR Array performance: Sensitivity...................................................6 Specificity...................................................6 Reproducibility............................................7 RT2 Profiler PCR Array application examples Example I: Identifying and monitoring oncogenic pathways....................................9 Example II: Monitoring cytokine expression levels.........................................11 Summary........................................................14
- 2. 2 www.qiagen.com QIAGEN The RT² Profiler PCR Array System is specifically designed to meet the unique challenges of profiling pathway-focused sets of genes using real-time PCR. Simultaneous gene expression analyses require similar qPCR efficiencies for accurate comparison among genes. RT² qPCR Primer Assays are designed with an amplicon size ranging from 100 to 250 bp and with PCR efficiencies uniformly greater than 90%. Overall, more than 10 thermodynamic criteria are included in the design of each RT² qPCR Primer Assay to ensure the most reliable and accurate results for pathway-based gene expression analysis in the RT2 Profiler PCR Array System. Experimental protocol Figure 1 depicts an overview of the RT2 Profiler PCR Array procedure. Simply isolate RNA from your samples and convert to cDNA using the RT2 First Strand Kit. Then aliquot this mixture (25 µl for 96-well or 10 µl for 384-well plates) to each well of the same RT2 Profiler PCR Array plate containing the pre- dispensed gene-specific primer sets, and perform PCR. Use your instrument’s software to calculate the threshold cycle (CT ) values for all the genes on each RT2 Profiler PCR Array. Finally, calculate fold changes in gene expression for pairwise comparison using the ∆∆CT method. A simple examination of CT value consistency for the housekeeping genes quickly indicates the proper normalization method. A similarly rapid evaluation of the built-in RNA quality control elements provides the relative levels of genomic DNA contamination and inhibitors of either the reverse transcription or the PCR itself. How it works -4 -3 -2 -1 0 1 2 3 4 1 10-6 10-5 10-4 10-3 10-2 10-1 Fold change ratio (log2 ) p-Valueforfoldchange A AB D DC 1.E-06 1.E-05 1.E-04 1.E-03 1.E-02 1.E-01 1.E+00 1.E-06 1.E+00 1.E-01 1.E-02 1.E-03 1.E-04 1.E-05 Breast tumor Normalbreast CCNE1 CDKN2A FGFR2 ITGB3 TGFB1 MMP9 ITGA2 MCAM TIMP3ITGB4 0 10 20 30 40 1.E-003 1.E+001 1.E-000 1.E-001 1.E-002 Cycle number DeltaRn 0 10 20 30 40 1.E-003 1.E+001 1.E-000 1.E-001 1.E-002 Cycle number DeltaRn 5. Data analysis 4. Run in your real-time PCR instrument Control profile Experimental profile 3. Add cDNA to RT2 SYBR® Green Master Mix Aliquot mixture across RT2 Profiler PCR Array 2. Convert total RNA to cDNA Control Experimental 1. Isolate RNA from cells, tissues, FFPE and/or blood Figure 1. The complete RT2 Profiler PCR Array procedure is easy to use and requires minimal hands-on time.
- 3. 3www.qiagen.comRT2 Profiler PCR Arrays: Pathway-focused gene expression profiling with qRT-PCR RT2 Profiler PCR Array design and gene content Each RT2 Profiler PCR Array contains gene-specific qPCR assays for a thoroughly researched set of 84 genes relevant to a pathway or disease state and three RNA quality control elements (see Figure 2 for the layout of a typical RT2 Profiler PCR Array). Researchers are able to focus on genes related to their biological pathway or disease state with our pre-designed pathway- or application-specific gene panels. By limiting the range to less than 100 genes (instead of thousands at one time), analysis can be achieved much faster and with greater precision due to the highly specific, yet smaller amount of data to analyze. As a result, more meaningful data can be obtained in less time. This process also streamlines the preparation stages of the experiment because the relevant genes are already grouped into one ready-to-use assay. 1 2 3 4 5 6 7 8 9 10 11 12 A Gene 1 Gene 2 Gene 3 Gene 4 Gene 5 Gene 6 Gene 7 Gene 8 Gene 9 Gene 10 Gene 11 Gene 12 B Gene 13 Gene 14 Gene 15 Gene 16 Gene 17 Gene 18 Gene 19 Gene 20 Gene 21 Gene 22 Gene 23 Gene 24 C Gene 25 Gene 26 Gene 27 Gene 28 Gene 29 Gene 30 Gene 31 Gene 32 Gene 33 Gene 34 Gene 35 Gene 36 D Gene 37 Gene 38 Gene 39 Gene 40 Gene 41 Gene 42 Gene 43 Gene 44 Gene 45 Gene 46 Gene 47 Gene 48 E Gene 49 Gene 50 Gene 51 Gene 52 Gene 53 Gene 54 Gene 55 Gene 56 Gene 57 Gene 58 Gene 59 Gene 60 F Gene 61 Gene 62 Gene 63 Gene 64 Gene 65 Gene 66 Gene 67 Gene 68 Gene 69 Gene 70 Gene 71 Gene 72 G Gene 73 Gene 74 Gene 75 Gene 76 Gene 77 Gene 78 Gene 79 Gene 80 Gene 81 Gene 82 Gene 83 Gene 84 H HK1 HK2 HK3 HK4 HK5 GDC RTC RTC RTC PPC PPC PPC Figure 2. Layout of the cataloged RT2 Profiler PCR Arrays. Wells A1 through G12 contain individual qPCR assays for 84 genes relevant to a biological pathway or disease state. Wells H1 through H5 contain a panel of housekeeping genes (HK1–HK5) used for normalizing the RT2 Profiler PCR Array data. Well H6 contains a Genomic DNA Control (GDC) primer set that specifically detects non- transcribed, repetitive genomic DNA with a high level of sensitivity. Wells H7 through H9 contain replicate Reverse Transcription Controls (RTC). These elements verify the efficiency of the RT reaction with a qPCR assay that specifically detects template synthesized from the RT2 First Strand Synthesis Kit’s built-in external RNA control. The replicate Positive PCR Controls (PPC) in wells H10 through H12 report on the efficiency of the polymerase chain reaction itself. These elements use a pre-dispensed artificial DNA sequence and the primer set that detects it. The two sets of replicate control wells (RTC and PPC) also test for inter-well and intra-plate consistency. Why RT2 Profiler PCR Arrays? J J Simplicity: The simplicity of RT2 Profiler PCR Arrays makes expression profiling accessible for routine use in every research laboratory with a real-time PCR instrument. J J Performance: RT2 Profiler PCR Arrays have the sensitive, reproducible, specific, and reliable performance to accurately profile multiple genes simultaneously in 96- or 384-well formats. J J Relevance: RT2 Profiler PCR Arrays focus on profiling the genes relevant to the pathways or disease states of your interest.
- 4. 4 www.qiagen.com QIAGEN Pathway-focused RT2 Profiler PCR Arrays The 96- or 384-well format of the RT2 Profiler PCR Arrays is uniquely suited to our pathway-focused design concept. This product line combines the current understanding of important biological pathways with real-time PCR technology to generate application-specific research tools. To compile each array’s comprehensive list of genes and to continually expand the breadth of available pathways, we utilize a systematic process comprising literature surveys, database searches, expert review, and user feedback. QIAGEN now has the largest collection of pathway- and application-specific human, mouse, and rat PCR arrays available on the market. (For examples, see Table 1.) This knowledge-based design merges the benefits of hypothesis-driven and discovery-based research, allowing researchers to answer highly specific questions in a systematic fashion. These pre- designed application-specific PCR arrays accelerate, simplify, and improve life science research by saving time, effort, and resources. Currently, RT2 Profiler PCR Arrays are available for many pathways including apoptosis, inflammation, signal transduction, cancer, and other diseases. Visit the SABiosciences web site (www.SABiosciences.com/ArrayList.php) for a complete list. Table 1. Examples of cataloged pathway-focused RT² Profiler PCR Arrays Research application RT² Profiler PCR Array Gene content selection for the RT² Profiler PCR Array example Biological process Human Apoptosis TNF ligands and their receptors BCL2 family members Caspases Death and effector domains ATM and p53 pathways Functionally or structurally related genes Mouse Common Cytokines Interferons and interleukins Bone morphogenetic proteins Tumor necrosis factors Other various growth factors Signal transduction pathways Human NFκB Signaling Pathway Extracellular ligands and receptors NFκB and IκB family members Kinases Transcription factors Responsive genes Disease Human Cancer PathwayFinder Cell cycle control and DNA damage repair Apoptosis and cell senescence Cell adhesion Angiogenesis Invasion and tumor metastasis Customized RT² Profiler PCR Arrays For researchers who have special gene expression profiling needs, we offer a streamlined custom design and array production service. Custom RT² Profiler PCR Arrays provide researchers the flexibility to 1) verify a focused panel of genes identified by a high-density, genome-wide microarray, 2) modify the gene content of an existing RT² Profiler PCR Array to better fit their research project, or 3) characterize a pathway or otherwise focused gene panel not covered by one of the cataloged RT² Profiler PCR Arrays. The content of an array may also be subdivided into multiple sets of a smaller number of gene targets. This format allows for the characterization of multiple biological or technical replicates on the same array and during the same run. Like the cataloged products, Custom RT² Profiler PCR Arrays are also available in either 96- or 384-well plate formats. The complete RT² Profiler PCR Array System: Why the RT² Profiler PCR Array System works The complete RT² Profiler PCR Array System includes the RT2 Profiler PCR Arrays, the RT2 SYBR Green qPCR Mastermixes and the RT2 First Strand Kit. These system components are optimized for SYBR Green real-time PCR detection. The primer design and the optimized master mix formulation work together to insure the specificity of each assay in the array. The instrument-specific RT² Profiler PCR Array plate formats and the master mixes containing the appropriate reference dyes also provide RT² Profiler PCR Arrays with the flexibility to match most real-time PCR platforms. The RT2 First Strand Kit provides superior sensitivity and an external RNA control detected by the RT² Profiler PCR Array that helps test the quality of the input RNA material. Component 1: RT2 qPCR Primer Assays The greatest challenge for the RT² Profiler PCR Array System is the amplification of every relevant pathway- or disease-focused gene during the same run. The same uniform PCR conditions must be used while still achieving the high level of sensitivity, specificity, and reproducibility expected of real-time PCR. We have the best possible qPCR assays and optimized the PCR master mix formulation for SYBR Green detection by experimentally testing thousands of qPCR assays under many reaction conditions.
- 5. 5www.qiagen.comRT2 Profiler PCR Arrays: Pathway-focused gene expression profiling with qRT-PCR RT2 qPCR Primer Assays: key primer design criteria Three of the most important primer design criteria in our experimentally verified computer algorithm are: 1. Specificity: Using BLAST and other algorithms, the specificity of each primer set is measured against the entire human, mouse, or rat genome to prevent the amplification of sequence-related, non specific secondary products. The primer specificity is also checked against the E. coli genome to ensure that the primers do not amplify bacterial genomic DNA, a common but minor contaminant of many Taq DNA polymerases. 2. Uniformity: So that the same annealing temperature may be employed for every well in each RT² Profiler PCR Array, only primer pairs with similar GC content, melting temperature (Tm), and other chemical and physical properties are used. 3. Efficiency: Short amplicons (~100–200 bp) have been chosen for our primer pairs so that the enzyme replicates the entire sequence in the time allotted by the cycling program. Several filters are also used to strengthen the 3-prime anchoring of the primers, eliminating the amplification of dimers and other nonspecific annealing events. Component 2: RT2 qPCR Mastermixes PCR master mix quality also plays an important role in the performance of SYBR Green-based real-time PCR. A tightly controlled hot-start Taq DNA polymerase is a critical component for success. The RT2 qPCR Mastermixes utilize a unique and proprietary chemically-modified HotStart Taq polymerase which only gains full activity after its heat activation step. Under these conditions, nonspecific priming events occurring at low temperatures are not extended. Other master mixes often amplify the resulting templates into nonspecific products which can cause false positive results. In addition, the RT2 qPCR Mastermixes include proprietary chemical components that further minimize primer dimer formation and ensure high amplification efficiencies for even the most difficult-to-amplify genes. The combination of the RT2 qPCR Primer Assay design and the high performance of the RT2 SYBR Green qPCR Mastermix formulation is the foundation for the guaranteed specificity of the assays on the RT² Profiler PCR Array. Component 3: RT2 First Strand Kit The RT² First Strand Kit contains all of the reagents needed not only to convert RNA into first strand cDNA, but also for the removal of genomic DNA from the RNA in the same simple two- step, 30-minute reaction. A proprietary genomic DNA elimination buffer completely removes any residual genomic DNA from your RNA sample. The buffer’s optimized formulation also allows direct use of this RNA preparation for reverse transcription and finally real-time PCR without affecting reaction performance. Because genomic DNA contamination is eliminated, real-time PCR signal intensities accurately reflect the relative level of gene- specific mRNA transcript. The kit also includes a built-in external RNA control, an in vitro transcript with an artificial sequence designed to help test for inhibitors of reverse transcription. The reverse transcription control (RTC) in the RT² Profiler PCR Array specifically detects cDNA template generated by the kit from the external RNA control. A reproducible threshold cycle value from this control indicates a consistent and high level of RNA quality and transcription efficiency. Such a result provides a greater degree of confidence in the final results. The RT² First Strand Kit is optimized for use with the RT² SYBR Green qPCR Mastermixes and subsequent gene expression analysis with the RT2 Profiler PCR Arrays as part of the complete RT² Profiler PCR Array System. Random hexamers and oligo-dT prime reverse transcription in an unbiased manner and capture more difficult-to-detect genes. The reverse transcriptase, optimized magnesium concentration, and other buffer components maximize cDNA product yield and length. The RT² First Strand Kit contains a complete set of reagents for the conversion of RNA into PCR template and provides greater control over RNA quality than other available kits or enzyme sources. Table 2 summarizes the features of the RT2 Profiler PCR Array System.
- 6. 6 www.qiagen.com QIAGEN Table 2. Features of the complete RT2 Profiler PCR Array system Array design 84 pathway-focused genes 5 housekeeping genes 1 Genomic DNA control 3 Reverse Transcription Controls (RTC) 3 Positive PCR controls (PPC) Primer design Specificity: sequence alignment filter Uniformity: consistent melting and annealing temperatures Efficiency: short amplicon sequence Master Mix Instrument-specific SYBR Green formulations Supports all ABI, Bio-Rad, MJ Research, and Stratagene platforms Hot start enzyme: No extension of nonspecific priming events No amplification of secondary products like primer dimers First strand synthesis Optimized gDNA elimination buffer prevents false positive signals Built-in External RNA Control to test for inhibitors of RT RT² Profiler PCR Array performance: Sensitivity Researchers continually attempt to detect genes at ever lower levels of expression and in ever smaller amounts of total RNA. To meet these needs, the RT² Profiler PCR Array System must pass a very stringent test of sensitivity. A wide variety of universal RNA amounts were characterized with the RT² Profiler PCR Array System and an array representing inflammatory cytokine and receptor genes that are known to be expressed at very low levels. Figure 3 plots the percent positive call (the percentage of genes with CT <35) versus the amount of input RNA. The results indicate that the RT² Profiler PCR Array System achieves greater than 80 percent positive calls with input total RNA amounts as low as 1 ng per array plate. For other pathways or gene panels expressed at higher levels, the sensitivity of the system may be further improved, potentially yielding high positive call rates with even lower amounts of input total RNA. However, the recommended amount of input RNA for first-time users is 1.0 µg to assure a maximum number of positive calls. 0 20 40 60 80 100 120 50100 11025 Percentpositivecall(%) Input RNA [ng] 0 0.05 0.1 0.15 0.2 0.25 0.3 Percentincreasepositivecallrate(%) 0.35 0.4 Unamplified PreAMP % Increase in positive call rate Figure 3. RT² Profiler PCR Arrays detect as little as 1 ng RNA. Different amounts of universal total RNA were characterized using the Human Inflammatory Cytokines and Receptors PCR Array (PAHS-011) with or without preamplification. The percentage of detectable genes was calculated for each RNA amount, with or without preamplification using the RT2 PreAMP cDNA Synthesis Kit. The percentage of detectable genes was calculated for each RNA amount and the new pathway-focused PreAMP technology was found to enable detection with as little as 1 ng RNA. Specificity The RT² Profiler PCR Array System has been designed and optimized for the SYBR Green detection method used by most real-time systems, making RT² Profiler PCR Arrays very flexible and widely applicable. Concerns have been raised over the specificity of SYBR Green detection and its ability to amplify only one gene-specific amplicon product, because it detects double-stranded DNA nonspecifically. Our experimentally verified primer design algorithm, used for the RT² Profiler PCR Arrays, guarantees the generation of single, gene- specific amplicons without the co-amplification of primer dimers or other nonspecific secondary products. For an example of a stringent test of RT² Profiler PCR Array specificity, we characterized the real-time PCR dissociation curves of each gene on a RT² Profiler PCR Array representing highly homologous members of the TGFβ and Bone Morphogenetic Protein (BMP) gene families. Products were also characterized by agarose gel electrophoresis. Figure 4 displays the representative dissociation curves and the agarose gel results for the BMP gene family. Each dissociation curve contains only one peak, and each agarose gel lane contains only one band of the predicted size. The results indicate that the RT² Profiler PCR Array amplifies gene-specific products despite the expression of highly homologous members of the same gene family in the same RNA sample. The optimized RT² Profiler PCR Array System now brings a level of specificity to SYBR Green detection that most thought could be achieved only by more expensive probe-based methods.
- 7. 7www.qiagen.comRT2 Profiler PCR Arrays: Pathway-focused gene expression profiling with qRT-PCR BMP1 BMP2 BMP3 BMP4 BMP5 BMP6 BMP7 BMP15 Fluorescence 0 20 40 60 80 100 60 70 80 90 BMP1 88.6 Fluorescence 0 20 40 60 80 100 60 70 80 90 BMP2 89.78 Fluorescence 0 20 40 60 80 100 60 70 80 90 BMP3 90.88 Fluorescence 0 20 40 60 80 100 60 70 80 90 BMP4 84.35 Fluorescence 0 20 40 60 80 100 60 70 80 90 BMP5 82.28 Fluorescence 0 20 40 60 80 100 60 70 80 90 BMP6 83.87 Fluorescence 0 20 40 60 80 100 60 70 80 90 BMP7 87.2 Fluorescence 0 20 40 60 80 100 60 70 80 90 BMP15 86.17 Single dissociation curvesA B Tm [°C] Tm [°C] Tm [°C] Tm [°C] Tm [°C] Tm [°C] Tm [°C] Tm [°C] Figure 4. High specificity with the RT² Profiler PCR Array System. RT2 Profiler PCR Arrays demonstrate a high degree of specificity for target genes. XpressRef Human Universal Total RNA (5 µg) was characterized on the Human TGFβ/BMP Signaling Pathway RT² Profiler PCR Array using the RT2 SYBR Green/Fluorescein qPCR Mastermix on the Bio-Rad iCycler instrument. After a standard melting curve program, dissociation curves were obtained (Panel A), and the products were characterized by agarose gel electrophoresis (Panel B). Reproducibility The quantitative nature of real-time PCR should impart a high degree of reproducibility onto the RT² Profiler PCR Array System. To test this reproducibility, two different end-users characterized, in technical replicates (n = 4), the same universal total RNA sample, each with two separate manufacturing lots of a cataloged RT² Profiler PCR Array on two separate days. The raw threshold cycle values for the entire array’s gene panel were then compared between each user’s replicates and all four of the other user’s replicates. Figure 5 displays the resulting scatter plots and correlation coefficients. Each comparison yields the predicted ideals of straight lines with slopes of 1.0 and correlation coefficients of 0.99 or greater. The results demonstrate the high degree of plate-to-plate, run-to-run, and replicate-to-replicate reproducibility inherent in the RT² Profiler PCR Arrays System technology, even at the level of raw data. A B CT from User B CTfromUserA B1 B4B3B2 A1A4A3A2 User-to-user reproducibility A1 A2 A3 A4 0.993 0.989 0.995 0.992 0.994 0.990 0.995 0.992 0.992 0.990 0.993 0.992 0.993 0.992 0.994 0.992 B1 B2 B3 B4 Correlation coefficients (R values) Figure 5. High user-to-user reproducibility. The RT² Profiler PCR Array System demonstrates a high degree of user-to-user reproducibility. Two different end-users characterized template cDNA prepared from Human XpressRef Universal Total RNA (5.0 µg) in technical quadruplicates using the Human Drug Metabolism RT² Profiler PCR Array and the RT2 SYBR Green/Fluorescein qPCR Mastermix on the Bio-Rad iCycler. Panel A compares the raw threshold cycle values of the array’s gene panel as determined by each of the first end-user’s replicates versus each of the second end-user’s replicates. Panel B lists the correlation coefficient of the linear curve fit for each scatter plot comparison.
- 8. 8 www.qiagen.com QIAGEN To directly demonstrate that the results from the RT² Profiler PCR Array System are indeed reproducible, the fold-differences in the expression of drug metabolism genes between two different RNA samples were compared across three different real-time PCR instrument platforms. In each gene expression profile comparison shown in Figure 6, the curve fit to a straight line with a slope of one (1) has a correlation coefficient of 0.97 or higher. Assuming good RNA sample preparation and proper execution of the RT² Profiler PCR Array protocol, any differences observed in gene expression levels are attributable to the biological conditions under study and not experimental variation associated with this level of reproducibility in the technology itself. Table 3 summarizes the typical performance of the RT2 Profiler PCR Array. Table 3. Typical performance of the RT2 Profiler PCR Array Sensitivity 80% positive call with as little as 25 ng Dynamic range At least five (5) orders of magnitude Specificity Primers amplify single, target-specific PCR products Reproducibility Correlation coefficients (R) ≥ 0.99 for intra-lab raw CT values Correlation coefficients (R) ≥ 0.97 for inter-lab fold-change values Average standard deviation of 0.25 threshold cycles A B Instrument-to-instrument reproducibility 7500 FAST Mx3000p iCycler 1 0.980 1 0.981 0.973 1 7500 FAST Mx3000p iCycler Correlation coefficients (R values) iCycler 7500 FAST Mx3000p -10 -5 0 5 -10 -5 0 5-10 -5 0 5 -10 -5 0 5 -10 -5 0 5 -10 -5 0 5 Figure 6: High instrument-to-instrument reproducibility. RT² Profiler PCR Arrays demonstrate a high degree of instrument-to-instrument reproducibility. Two different MAQC RNA samples were characterized using the Human Drug Metabolism RT² Profiler PCR Array and either the RT2 SYBR Green/Fluorescein qPCR Master Mix on the Bio-Rad iCycler or the RT2 SYBR Green/ROX qPCR Master Mix on either the Stratagene Mx3000p or the ABI 7500 FAST instrumentation. The fold- difference in the expression of the entire array’s gene panel between the two RNA samples determined by each instrument was calculated and compared with both of the other two instruments in scatter plots (Panel A) and the correlation coefficients of the linear curve fits (Panel B).
- 9. 9www.qiagen.comRT2 Profiler PCR Arrays: Pathway-focused gene expression profiling with qRT-PCR RT² Profiler PCR Array application examples Example 1: Identifying and monitoring oncogenic pathways Materials and methods: Template cDNAs prepared from normal human breast and human breast tumor #1 total RNA (BioChain Institute, Inc., 5.0 μg) were characterized in technical triplicates using the Human Cancer PathwayFinder RT² Profiler PCR Array and the RT2 SYBR Green/Fluorescein qPCR Mastermix on the iCycler PCR System. Triplicate total RNA samples prepared from normal human breast and human breast tumor #2 total RNA (BioChain Institute, Inc., 1.0 μg) were converted into template cDNA and then characterized using the Human Extracellular Matrix and Adhesion Molecules RT² Profiler PCR Array and the RT2 SYBR Green/Fluorescein qPCR Mastermix on the iCycler® PCR System. Results: Gene expression profiling is important for discovering and verifying tumor biomarkers and therapeutic targets. Using the Cancer PathwayFinder RT² Profiler PCR Array and the Human Extracellular Matrix and Adhesion Molecules RT² Profiler PCR Array, we examined the gene expression profiles exhibited by two different human breast tumors relative to normal tissues. The study compared the relative expression of both tumorigenesis- and adhesion-related genes between each tumor sample and a normal breast tissue sample. This study provides an example of the identification of a pathway affected by the transformation of a particular tumor type. Total RNA samples from normal breast tissue and the first of two unmatched breast tumors were analyzed using the Cancer PathwayFinder RT² Profiler PCR Array. This array includes representative genes from the following biological pathways involved in tumorigenesis: adhesion, angiogenesis, apoptosis, cell cycle control, cell senescence, DNA damage repair, invasion, metastasis, signal transduction molecules, and transcription factors. Figure 7 displays a scatter plot of the results from the Cancer PathwayFinder RT² Profiler PCR Array experiment, indicating the positions of several noteworthy genes based on their large fold-differences in expression between the normal breast and the breast tumor samples. Of the 84 cancer pathway-focused genes in this array, 24 genes demonstrated at least a 3-fold difference in gene expression between normal breast tissue and the breast tumor. Upregulation was observed in 17 genes, while 7 genes appeared to be downregulated in the tumor samples, for a total of 24 differentially regulated genes (Table 4). A subset of six of the 24 genes (ITGA2, ITGA4, ITGB3, MCAM, MMP9, and TIMP3) represents adhesion and extracellular matrix molecules. ITGB3 was downregulated, while the other five genes were upregulated. The results suggest that changes in the expression of genes involved in cellular interactions played an important role in the transformation of this and perhaps other breast tumors. To further test this hypothesis and to analyze the expression of other adhesion-related genes, a second breast tumor sample was characterized using a cellular adhesion- focused RT² Profiler PCR Array. 1.0 1.0−1 1.0−2 1.0−3 1.0−4 1.0−5 1.0−6 1.0−1 1.01.0−2 1.0−3 1.0−4 1.0−5 1.0−6 Normalbreast Breast tumor CCNE1 CDKN2A FGFR2 ITGB3 TGFB1 MMP9 ITGA2 MCAM TIMP3 ITGB4 Figure 7. Relative expression comparison for 84 cancer-related genes between normal human breast and human breast tumor #1. The figure depicts a log transformation plot of the relative expression level of each gene (2-∆CT ) between breast tumor (x-axis) and normal breast tissue (y-axis). The gray lines indicate a four-fold change in gene expression threshold.
- 10. 10 www.qiagen.com QIAGEN Table 4. Changes in expression for cancer-related genes between normal human breast and human breast tumor #1* Average raw CT Gene Fold change tumor/normal t-Test p-value Tumor Normal MMP9 542.45 0.0000 21.8 30.0 TIMP3 39.85 0.0000 30.5 35.0 TNF 35.51 0.0000 25.2 29.5 ITGA4 27.54 0.0001 31.1 35.0 TGFB1 15.10 0.0000 21.1 24.1 BCL2 12.27 0.0012 24.6 27.4 FOS 9.74 0.0003 20.1 22.5 GZMA 9.30 0.0003 25.5 27.9 TEK 6.88 0.0003 27.7 29.7 JUN 6.88 0.0008 22.3 24.2 APAF1 5.34 0.0018 23.8 25.4 ATM 5.34 0.0001 19.9 21.5 ITGA2 5.34 0.0042 26.8 28.4 PIK3R1 5.34 0.0001 21.3 22.9 SYK 4.65 0.0003 22.5 23.9 PLAUR 4.44 0.0007 26.4 27.7 MCAM 4.14 0.0000 28.2 29.4 PLAU 3.61 0.0132 27.8 28.8 ETS2 3.44 0.0015 23.5 24.4 ANGPT1 3.36 0.0028 31.3 32.2 FAS 3.36 0.0031 24.7 25.6 TERT 3.29 0.0314 34.1 35.0 NFKB1 3.07 0.0068 22.9 23.6 NME4 3.07 0.0019 24.1 24.9 ERBB2 -3.29 0.0000 25.9 23.3 ITGA3 -3.78 0.0000 23.9 21.1 UCC1 -4.65 0.0003 26.6 23.5 MYC -5.34 0.0004 25.7 22.4 SNCG -7.73 0.0000 26.0 22.2 CCNE1 -8.48 0.0000 27.6 23.7 ITGB3 -9.08 0.0026 33.3 29.3 CDKN2A -26.91 0.0000 29.4 23.8 FGFR2 -41.74 0.0007 31.5 25.2 * Genes from the experiment in Figure 7 that exhibit a three-fold or greater change in expression between normal and tumor breast tissue are listed. Total RNA samples from normal breast tissue and the second of the two unmatched breast tumors were characterized on the Extracellular Matrix and Adhesion Molecules RT² Profiler PCR Array. Genes that displayed at least a 3-fold difference in expression between the samples are listed in Table 5. On this array, a larger number of genes exhibited differential expression in the second tumor than was observed for the first tumor on the Cancer PathwayFinder RT² Profiler PCR Array. A total of 38 genes had a different level of expression in the breast tumor than in the normal breast tissue, with 27 genes showing upregulation and 11 genes showing downregulation. The first and second breast tumor sample displayed concordant results for four genes (MMP9, TIMP3, ITGA4, and ITGB3) that changed expression in the same direction on the Cancer PathwayFinder RT² Profiler PCR Array and the Extracellular Matrix and Adhesion Molecules RT² Profiler PCR Array. These results not only further verify that cellular adhesion genes changed their expression in these two particular breast cancer tumors, but also suggest a more general role for these genes in breast tissue transformation. These types of studies provide a new and convenient way to investigate the mechanisms underlying oncogenesis of specific tumors on a pathway-focused basis. The data shown here is consistent with known principles, that changes in the expression of genes related to cellular adhesion play a role in the transformation of breast tissue1–2. Alterations in the expression of these genes enhance or inhibit metastasis of the tumor from its original location and may aid tumor invasion into a new tissue or organ. A RT² Profiler PCR Array focusing on Human Tumor Metastasis is available and could be used to continue this study.
- 11. 11www.qiagen.comRT2 Profiler PCR Arrays: Pathway-focused gene expression profiling with qRT-PCR Table 5. Changes in relative expression for genes encoding extracellular matrix and adhesion molecules between normal human breast and human breast tumor #2* Average raw CT Gene Fold change tumor/normal t-Test p-value Tumor Normal CTNND2 229.39 0.0000 23.8 31.6 TIMP3 104.57 0.0000 28.4 35.0 SELE 43.46 0.0000 26.3 31.7 MMP1 36.97 0.0000 27.9 33.0 MMP3 34.50 0.0000 29.9 35.0 KAL1 31.45 0.0000 23.1 28.0 MMP13 21.73 0.0000 26.9 31.2 MMP10 16.47 0.0000 31.0 35.0 MMP16 16.09 0.0000 25.3 29.2 FN1 11.92 0.0512 29.9 33.4 CD44 11.92 0.0046 23.5 27.0 TNC 10.87 0.0000 22.9 26.2 MMP9 10.62 0.0001 27.1 30.4 SELP 9.46 0.0001 26.1 29.2 MMP11 7.51 0.0000 25.0 27.9 COL7A1 7.00 0.0057 30.9 33.7 CSPG2 6.39 0.0000 24.0 26.6 COL4A2 5.56 0.0009 23.9 26.3 TNA 5.43 0.0001 26.9 29.3 COL11A1 5.31 0.0017 30.7 33.0 THBS1 4.84 0.0185 24.1 26.3 SELL 4.21 0.0002 24.7 26.7 HAS1 3.93 0.0010 27.5 29.4 CTNND1 3.84 0.0007 30.4 32.2 ITGA4 3.34 0.0000 25.4 27.1 ITGA7 3.34 0.0003 27.6 29.3 THBS2 3.19 0.0058 26.1 27.7 SPP1 -3.08 0.0000 23.6 21.9 ITGB5 -3.31 0.0000 23.2 21.4 CTNNB1 -3.31 0.0003 21.2 19.4 ITGAV -4.57 0.0072 26.5 24.2 CNTN1 -5.25 0.0001 28.8 26.3 MMP7 -5.37 0.0000 25.7 23.2 ITGB3 -7.25 0.0094 32.1 29.2 ADAMTS1 -9.35 0.0003 25.5 22.2 LAMA3 -10.26 0.0000 24.7 21.2 NCAM1 -23.02 0.0000 30.9 26.3 ITGB4 -30.38 0.0000 26.6 21.6 * The table lists genes that exhibit at least a three-fold difference in expression in the breast tumor sample when compared to the normal breast tissue. The raw threshold cycle (CT ) values seen in the two samples are also listed for comparison. Example II: Monitoring cytokine expression levels Materials and methods: Peripheral blood mononuclear cells (PBMC) were treated with or without 50 ng/mL PMA + 1 µg/ mL ionomycin for 6 or 24 hours. After each incubation period, total RNA was isolated from each preparation, and first strand cDNAs were prepared from 500 ng total RNA of each sample using the RT2 First Strand Kit. Template cDNAs were characterized in technical triplicates using the Human Common Cytokine RT² Profiler PCR Array with the RT² SYBR Green/ROX qPCR Mastermix on the 7500 FAST® Real-Time PCR System (Applied Biosystems). Fold changes in gene expression between the stimulated and resting PBMC RNA were calculated using the DDCT method in the PCR Array Data Analysis template. To verify the results obtained from the RT² Profiler PCR Array, the protein levels of eight selected cytokines secreted by the PBMC (IL-2, 4, 5, 10, 12, 13, and IFN-γ and TNF-α) were measured. Cell supernatants were collected at different time points (0, 6, 24, and 48 hours) and the cytokines were measured by enzyme-linked immunosorbent assay (ELISA) using the Human Th1/Th2 Cytokines Multi-Analyte ELISArray Kit. Optical density (OD) readings for each protein analyte from the samples were compared to a standard curve for quantification of the amount of protein in the original samples. Results: Cytokine quantification is an important element in studies of inflammation and immune responses. Quantitative RT-PCR, a rapid and sensitive assay, is the preferred method to quantify cytokine mRNA levels because they are often expressed at low levels. The RT² Profiler PCR Array System offers a simple, reliable and sensitive tool for multiple cytokine profiling. Using the Human Common Cytokines RT² Profiler PCR Array, we have monitored the mRNA levels of 84 different cytokines in stimulated versus untreated human peripheral blood mononuclear cells (PBMC). The gene expression results identify 23 upregulated and 6 downregulated genes (with >5 fold-change and p<0.005) upon 6 hours of stimulation. At 24 hours, the effects of PMA- ionomycin treatment on genes such as BMP’s, CSF’s, IFNγ, IL1β, IL6, IL11, TGFβ and TNF are continuously observed, while the effect on other genes such as interleukin 2, 3, 5, 9, 10, 13, 17 and 22 diminishes 24 hours after stimulation (Figure 8 and Table 6). To verify these results, the protein levels of 8 selected cytokines secreted by the PBMC were measured using a multiplex ELISA array (Figure 9). The effects of these mRNA expression changes were observed in the changes in cytokine
- 12. 12 www.qiagen.com QIAGEN production induced by PMA-ionomycin treatment at 6 hours after stimulation. The induction of cytokine production by PMA- ionomycin was sustained up to 48 hours after stimulation, despite the observation of subdued mRNA expression for some cytokines at 24 hours after stimulation. −7 17−5 −3 −1 1 3 5 7 9 11 13 15 1.0 10−1 10−2 10−3 10−4 10−5 10−6 10−7 10−8 10−9 Fold difference (log2 ) p-value IL1A IL1B TNFSF13B IFNA5 IL1F7 BMP3 BMP6 TNFSF14 TNFRSPSF11B PDGFA LTA CSF1 TNF IL10 TNFSF10 TGFB2 TNFSF11 IL5 IL11 IFNG CSF2 IL21 IL9 IL13 IL17 IL22 IL2 IL3 Figure 8. RNA isolated from resting PBMC or PBMC stimulated with PMA-ionomycin for 6 or 24 hours were characterized on the Human Common Cytokine RT² Profiler PCR Array. Log2 fold-changes in gene expression between PBMC stimulated with PMA-ionomycin and resting PBMC are plotted against t-test p-values to produce a “volcano plot”. The higher the position, the more significant the gene’s fold-change. Genes plotted farther from the central axis have larger changes in gene expression. Thresholds for fold-change (vertical lines, 5-fold) and significant difference (horizontal line, p < 0.005) were used in this display. Using the Human Common Cytokines RT² Profiler PCR Array, we identified 29 genes that exhibited at least a five-fold change in gene expression between resting and PMA-ionomycin stimulated peripheral blood mononuclear cells at 6 hours after stimulation. Our data show that changes in cytokine mRNA levels detected by RT² Profiler PCR Arrays accurately predict changes in protein levels measured by ELISA. Hence, the RT² Profiler PCR Array offers a simple, reliable, and sensitive tool for multiple cytokine profiling. 0 1000 2000 3000 4000 6 hours 3962 24 hours 145 Time (Hours after stimulation) 5000 IL-13 IL-13 0 500 1000 6 hours 526 24 hours 1287 Time (Hours after stimulation) 1500 IFN- IFN- 30 35 40 6 hours 40 24 hours 35 Time (Hours after stimulation) 45 TNF- TNF- mRNAexpression (Foldchangevs.untreatedcells) 0 200 400 600 0 hrs 21.2 Time (Hours after stimulation) 800 IL-13 Time (Hours after stimulation) Time (Hours after stimulation) Secretedcytokineproteinlevel (pg/ml) 6 hrs 229.5 24 hrs 707.9 48 hrs 753.1 0 200 400 600 0 hrs 0.5 800 IFN- 6 hrs 25300 24 hrs 224912 48 hrs 404176 0 200 400 600 0 hrs 38.3 800 TNF- 6 hrs 1819 24 hrs 8170 48 hrs 14475 Figure 9. The effects of PMA-ionomyocin on the secretion of the eight selected cytokines were assessed by multiplex cytokine ELISA. As shown in the above graphs, in parallel with the RT² Profiler PCR Array results (upper panel), a marked increase in cytokine release (lower panel) was seen for IL-13, IFN-γ, and TNF-α. The induction in cytokine secretion by PMA-ionomycin were sustained for up to 48 hours of stimulation, despite the observation of the subdued mRNA expression for some cytokines, such as IL-13 and TNF-α, after 24 hours of stimulation.
- 13. 13www.qiagen.comRT2 Profiler PCR Arrays: Pathway-focused gene expression profiling with qRT-PCR Average raw CT value Stimulated/Resting Average raw CT value Stimulated/Resting Gene Stimulated Resting Fold change t-test p-value Stimulated Resting Fold change t-test p-value IL2 14.64 29.99 47820.23 0.0000 13.54 26.91 11190.60 0.0000 IL3 19.53 34.56 38218.94 0.0000 18.46 30.35 4020.99 0.0000 IL22 21.08 34.14 9823.35 0.0000 24.26 30.62 87.02 0.0000 IL17 21.51 34.21 7601.14 0.0000 20.63 32.26 3365.64 0.0000 IL13 21.05 32.80 3961.96 0.0000 23.65 30.74 144.67 0.0000 IL9 23.49 35.00 3339.31 0.0000 22.22 31.15 516.75 0.0000 IL21 19.76 30.13 1522.26 0.0000 20.00 30.09 1152.06 0.0000 CSF2 16.80 27.15 1494.38 0.0000 15.53 26.86 2714.87 0.0000 IFNG 13.57 22.41 525.91 0.0000 13.94 24.19 1287.18 0.0000 IL5 21.89 29.40 208.71 0.0000 25.77 29.35 12.70 0.0000 IL11 24.22 31.12 136.74 0.0000 25.35 34.35 542.45 0.0000 IL10 21.43 27.21 62.77 0.0000 26.37 24.33 -3.87 0.0015 TNF 17.91 23.04 40.00 0.0000 18.69 23.72 34.54 0.0000 PDGFA 24.17 28.84 29.22 0.0000 23.27 28.05 29.11 0.0000 CSF1 21.27 25.64 23.73 0.0000 20.64 23.85 9.78 0.0000 TNFRSF11B 30.39 34.25 16.63 0.0003 30.63 32.16 3.06 0.0060 LTA 22.19 25.06 8.39 0.0000 20.26 24.76 23.92 0.0000 TNFSF11 26.61 29.10 6.40 0.0001 27.28 29.61 5.30 0.0001 BMP6 26.37 28.79 6.14 0.0003 26.40 29.28 7.84 0.0000 BMP3 31.45 33.71 5.50 0.0041 35.00 34.71 -1.16 0.1996 FASLG 20.90 23.16 5.46 0.0000 21.54 24.16 6.48 0.0000 TGFB2 28.98 31.23 5.43 0.0000 30.88 33.36 5.91 0.0029 TNFSF14 32.77 35.00 5.37 0.0009 33.51 35.00 2.98 0.0003 TNFSF8 20.16 22.27 4.92 0.0000 19.94 24.17 19.88 0.0000 TNFSF13 29.20 30.38 2.60 0.0000 31.80 26.02 -52.10 0.0000 BMP4 32.11 33.29 2.58 0.0935 28.99 32.54 12.38 0.0003 IL6 18.77 19.88 2.47 0.0002 19.92 22.49 6.29 0.0000 GDF10 33.11 34.08 2.23 0.1166 32.95 29.13 -13.30 0.0006 IL20 31.75 32.56 2.00 0.0117 32.27 35.00 7.03 0.0001 IL4 32.00 32.31 1.42 0.3010 33.36 32.22 -2.08 0.0025 TNFSF12 26.05 26.25 1.32 0.0057 29.28 23.84 -41.16 0.0000 IL12A 27.19 27.19 1.14 0.0971 27.18 27.18 1.06 0.3060 IL1F6 30.28 29.72 -1.29 0.2311 33.34 30.17 -8.48 0.0046 IL18 29.14 28.53 -1.33 0.0449 33.32 28.83 -21.26 0.0000 LTB 22.22 21.47 -1.48 0.0120 27.18 20.42 -102.54 0.0000 IL17C 28.78 27.95 -1.55 0.0213 31.86 27.66 -17.31 0.0001 IFNK 29.27 28.40 -1.60 0.0206 29.73 27.14 -5.71 0.0011 IL16 23.52 22.25 -2.11 0.0000 24.75 20.97 -12.91 0.0000 TNFSF4 28.43 26.89 -2.54 0.0002 27.96 25.45 -5.38 0.0000 IL1F9 29.69 28.07 -2.68 0.6977 26.92 22.81 -16.34 0.0000 IL15 29.46 27.55 -3.28 0.0007 28.79 26.32 -5.23 0.0000 IFNB1 31.11 29.07 -3.58 0.0022 34.37 30.03 -19.03 0.0015 BMP8B 29.36 27.25 -3.76 0.0001 31.35 28.51 -6.74 0.0018 IL12B 35.00 32.72 -4.25 0.0132 31.24 29.86 -2.46 0.0049 TGFA 29.29 26.92 -4.49 0.0000 27.96 24.06 -14.06 0.0000 IL1B 18.66 15.64 -7.12 0.0000 20.12 16.46 -11.93 0.0000 IL1F7 34.52 30.84 -11.19 0.0012 35.00 30.85 -16.76 0.0000 IFNA5 33.53 29.65 -12.89 0.0011 31.19 29.13 -3.93 0.0002 IL1A 24.27 20.02 -16.62 0.0000 25.48 23.24 -4.46 0.0000 TNFSF10 26.16 21.70 -19.22 0.0000 25.41 20.73 -24.20 0.0000 TNFSF13B 29.68 24.75 -26.62 0.0001 31.27 22.50 -411.10 0.0001 6 hours after stimulation 24 hours after stimulation Table 5. List of cytokines induced or downregulated in phorbol myristate acetate ionomycin-stimulated peripheral blood mononuclear cells (PBMC) versus resting PBMC * * The significance of the change in gene expression between the two samples was evaluated by unpaired Student’s t-test for each gene. The level of statistical significance is set at <0.005. Genes that show at least a five-fold difference in expression between the two samples are listed in the table. After six hours of stimulation, a total of 29 genes show at least a 5-fold change in expression between the stimulated and resting PBMC, with 23 genes having increased expression and six genes having decreased expression in stimulated PBMC.
- 14. 14 www.qiagen.com QIAGEN Summary: The RT2 Profiler PCR Array System is highly suited for analyzing the expression of a focused panel of genes. The flexibility, simplicity, and convenience of standard SYBR Green PCR detection methodology make the RT² Profiler PCR Array System accessible for routine use in any research laboratory. The correct combination of instrument-specific plate format and master mix matches the RT² Profiler PCR Array System with the most popular real-time instrument platforms. The arrays feature a pathway- focused or customizable gene content design, while demonstrating the sensitivity, specificity, and reproducibility expected of real-time PCR. The focused design of this system decreases the amount of time necessary to complete an experiment and facilitates easier and more straightforward data analysis. Using this system, results can be generated with as little as 25 ng or as much as 5 µg of total RNA starting material. The specificity of the system guarantees the amplification of only one gene-specific product in each reaction, meaning that the expression level result reflects only the gene of interest. The reproducibility of the system (with intra-lab and inter-lab correlations greater than 0.99 and 0.97, respectively) demonstrates that the same results are obtainable by multiple end-users. As a result, the RT2 Profiler PCR Array System is indeed ideally suited to allow every laboratory to combine the performance of real-time PCR with the profiling capabilities of a microarray. References: 1. Ross, J.S. et al. (2004) Breast cancer biomarkers and molecular medicine: part II. Expert Rev. Mol. Diagn. 4, 169. 2. Perou, C.M. et al. (1999) Distinctive gene expression patterns in human mammary epithelial cells and breast cancers. Proc. Natl. Acad. Sci. USA. 96, 9212.
- 15. The RT2 Profiler PCR Array is intended for molecular biology applications. This product is not intended for the diagnosis, prevention, or treatment of a disease. Trademarks: QIAGEN® (QIAGEN Group); SYBR® (Life Technologies Corporation); ABI® , ROX® (Applera Corporation); Opticon® , Chromo4® , iCycler® , MyiQ® (Bio-Rad Laboratories); Mx3000P® , MX3005P® , Mx4000® (Agilent); TaqMan® (Roche Molecular Systems). 1073956 04/2015 © 2015 QIAGEN, all rights reserved. Australia n 1-800-243-800 Austria n 0800-281011 Belgium n 0800-79612 Brazil n 0800-557779 Canada n 800-572-9613 China n 800-988-0325 Denmark n 80-885945 Finland n 0800-914416 France n 01-60-920-930 Germany n 02103-29-12000 Hong Kong n 800 933 965 India n 1-800-102-4114 Ireland n 1800 555 049 Italy n 800-787980 Japan n 03-6890-7300 Korea (South) n 080-000-7145 Luxembourg n 8002 2076 Mexico n 01-800-7742-436 The Netherlands n 0800-0229592 Norway n 800-18859 Singapore n 1800-742-4368 Spain n 91-630-7050 Sweden n 020-790282 Switzerland n 055-254-22-11 Taiwan n 0080-665-1947 UK n 01293-422-911 USA n 800-426-8157 www.SABiosciences.com www.qiagen.com