Sagemcom D530P Digital Cordless Phone User Guide

2
Dear customer,
You have just acquired a new generation Sagemcom telephone and thank you for placing your
confidence in us.
This product follows a strategy of continuous development. We reserve the right to make
changes without notice, modifications and improvements to the products described in this
user manual.
To operate the device safely and easily, please read carefully the paragraph
“Recommendations and safety instructions”, page 4.
The CE label confirms that the product complies with the 1999/5/EC regulations of
the European Union Parliament regarding wireless systems and telecommunications.
The declaration of compliance may be looked up on the www.sagemcom.com
website section «Support», or can be obtained from the following address :
Sagemcom Broadband SAS
250, route de l'Empereur 92848 Rueil-Malmaison Cedex - France
Copyright © Sagemcom Broadband SAS
All rights reserved
Sagemcom is a registered trademark.

3
Recommendations and safety
instructions ................................ 4
Discover... .................................. 6
Your phone ......................................................6
The handset screen .....................................9
Setting up................................. 10
Connecting the base ................................. 10
Handset set-up ........................................... 11
Switching the handset on / off ............... 11
Charging ...................................................... 12
Personalising the D530P base ............ 13
Browsing through the menus ................. 13
Menu tree structure.................. 17
Making and receiving calls........ 18
Managing a call .......................................... 18
Options during a call ................................ 19
Managing several calls ............................. 21
Managing calls with
the base D530P .........................................22
Using additional handsets .......................24
Using the phonebook ................................26
Locating your handset ..............................29
Listening to your messages .....................30
Locking / Unlocking the keypad .............30
Setting up... .............................. 31
The phone .....................................................31
The handset .................................................33
The base .......................................................35
The line ..........................................................38
Alarm........................................ 39
The alarm ......................................................39
Tracing your calls...................... 41
Call logs ........................................................41
The events log .............................................42
Environment ............................. 43
Guarantee ................................ 44

4
Recommendations and safety instructions
For safety reasons, never put the handset in the base station without the battery
inserted or without the lid on the battery compartment as this could cause an electric
shock.
To avoid damaging your handset/base, only use certified rechargeable batteries
NiMH 1.2 V 600 mAh, never use non-rechargeable batteries. Insert the batteries in
the handset/base battery compartment respecting polarity.
Only use the power unit supplied and connect it to the electricity mains in
accordance with the installation instructions in this user manual and the details on
the sticker regarding voltage, electrical current and frequency. As a precaution if
there is a risk of danger, the power plug can be pulled out to disconnect the 230 volt
power supply. Therefore the sockets should be near the device and easily
accessible.
Do not install your DECT telephone in a damp environment, such as a bathroom,
washroom, kitchen etc, and not within 1.50 metres of a source of water or outside.
This device is designed for use in temperatures of between 5 °C and 40 °C.
Your DECT telephone has a range of approx. 50 metres indoors and up to 300 metres
outdoors. The range can be affected by the proximity of metal objects, such as a
television and electrical devices.
Zones without reception may appear owing to elements in the building. This can
cause brief interruptions in the conversation, caused by faulty transmission.

5
Certain medical equipment and highly-sensitive machines or security systems may
be affected by the transmission power of the telephone. In these cases we
recommend adhering to the safety information.
In regions greatly affected by electrical storms we recommend that you protect your
telephone circuit with a special fixture for excess voltage.
Your D530 has anti-skid pads that should leave no traces on your furniture and
ensure stability.
However, given the wide variety of finishes used by furniture manufacturers, traces
may appear on surfaces in contact with the parts of your D530. Sagemcom
Broadband SAS decline all responsibility in any such cases of damage.
Do not attempt to remove screws or open the appliance. It does not contain any
user-replaceable parts
Worn out batteries must be disposed of in line with the recycling regulations in this
user manual.
This device is designed to be used for connecting to the public telephone network. If
problems should arise, contact your nearest specialist dealer. Only use the telephone
cable supplied.

6
Discover...
Your phone
The pack
Check that you have the following items in your pack:
 a D530 or D530P base according to model,
 two rechargeable batteries (type NiMH 1.2 V 600 mAh),
 a telephone connection cord,
 a mains power supply with connection cord,
 a belt clip,
 this user guide.
If you have purchased a Duo or Trio pack, you will also find for each extra handset:
 a charger,
 a mains power supply with connection cord,
 two rechargeable batteries (type NiMH 1.2 V 600 mAh),
 a belt clip.

7
The base
1 Handset location.
2 Handset(s) Search / Pairing key
• Long press: pairing of handsets.
• Short press: paging of handsets.
3 Display:
• Displays the current time.
• P: indicates PM if the time format is 12 Hour.
4 Volume keys:
• VOL -: To reduce the volume.
• VOL +: To increase the volume.
5 Hands-free key:
• Standby screen/During a call from the handset to
(de)activate the hands-free mode
• On receiving a call: to answer in hands-free mode;
press again to hang up.
• During a call from the base: to end the call.
6 To call My favourite numbers (direct call keys -
see page 37).
2
1
M1
M2
M3
M4
2
31
5
6
4
Model D530
Model D530P

8
The handset
1 Indicator light - incoming call.
2 Loudspeaker.
3 Graphic screen.
4 Upper and lower side keys :
• To Increase / Decrease the volume.
• Browsing through the menus.
5 Phonebook access key.
6 Menu access / validation key.
7 Mute button: cuts off the microphone.
8 "Hang up" button
• Short press: return to main menu.
• Long press: switch handset on / off.
9 Alphanumeric keypad.
10 "Hash" key
• Long press : (un)lock the keypad.
11 Microphone.
12 Charging terminals.
13 "Star" key
• Long press: to (de)activate the silent mode.
14 "Open line" key
• During a call: to (de)activate the hands-free
mode. 11
10
16
4
15
8
18
17
1
2
3
5
6
12
13
7
9
14

9
15 Browsing through the menus / Upper and lower keys:
• To increase / Decrease the volume.
• Browsing through the menus.
• : See the list of calls received.
• : See the list of outgoing calls.
16 R key (flashing, to manage several calls).
17 Cancel / Intercom / Delete character key.
18 Side key : (de)activate the amplifier.
The handset screen
THE ICONS DISPLAYED
In standby mode or during use, your phone screen informs you of your phone’s current state
through icons, and in particular:
1 Status icons: Indicates your phone’s current state.
2 Information field: in the normal state, displays the name of the handset and the current time.
When the 12-hour time format is set, AM or PM is displayed after the time.
Speakerphone
enabled
Battery charge condition
Silent mode
activated
There are messages on your online
message recorder
Alarm on Keypad locked
1
2
Handset.1
12:30

10
Setting up...
Connecting the base
1 Turn the base over.
2 Take the telephone connection cord, click it
into its socket and connect the other end of
the cord to the telephone socket.
3 Take the mains power supply. Connect the
jack plug of the power supply underneath the
base and connect the power supply to the
mains.
D530P - the display lights up.
4 Pass the cords through the cord grips
provided.
5 Place the base where you want it located.
Before making connections, please see the safety instructions at the start of the booklet.
4
3
2
1

11
Handset set-up
1 Take the batteries provided in the packaging.
2 Turn over your handset and press the top of the hatch to
release it.
3 Insert the batteries one by one according to their polarities as
indicated in the illustration opposite.
4 Fit the hatch to the handset by pushing it up until it is
completely closed.
5 The screen turns on. Place your handset on its base and fully
charge the batteries.
6 A beep sounds when you place the handset on the base.
The battery charging icon moves to inform you that
charging is in progress. The icon display stops moving when the
batteries are charged.
Switching the handset on / off
To switch on the handset, give a long press on the key .
To switch off the handset, give a long press on the key .
The message Switch off HS? is displayed.
Press the key to confirm.

12
Charging
To charge your phone, place the handset on the base, making sure that the base is connected
to an AC outlet.
Battery replacement
1 Turn off the handset. Turn it over to access the battery compartment hatch.
2 Remove the battery compartment hatch.
3 Remove the old batteries, insert the new batteries one by one the right way as indicated by
their polarities.
4 Refit the battery compartment hatch.
To ensure optimum charging, leave the handset on the base for at least 15 hours when
using the phone for the first time. During charging, the batteries may heat up. This is quite
normal and perfectly safe. If you do not obtain radio contact with your base, check the
electrical connections to your base.
Worn out batteries should be discarded in accordance with the recycling instructions
given in chapter “Environment”, page 43.
To prevent damage to your handset, only use approved AAA format NiMH 1.2 V 600 mAh
rechargeable type batteries. Never use non-rechargeable batteries.

13
Personalising the D530P base
The "M" keys on the base can be personalised with a photo of the user
associated with the key. Place a pointed tool in one of the two dimples
on the "M" key. Lift off the plastic cover. Use the cover as a template to
cut the photo to size. Insert the photo and replace the plastic cover.
Browsing through the menus
Browser
This browser allows you to quickly access menus and change your settings easily.
It points in two directions. To access the phone menu, press .
When choosing menus, press the top or the bottom of the browser to access
the previous or next menu.
During a call, press the top of the browser to increase the volume or the bottom
to decrease it.

14
The multifunction keys
Your telephone has two and "multifunction" keys which you can use in several ways:
Illustration
To browse-through menus, use the browser [or right side keys] and two multifunction buttons:
1 Press the key .
The main menu is displayed on the screen.
2 Press the top or bottom of the browser key to scroll through the menus and
access the desired function.
3 Confirm your choice/Enter the displayed menu by pressing the key .
4 Cancel your choice/Exit the displayed menu:
• either by pressing the key .
• or by pressing the : key; the home screen is displayed.
From the standby screen In a menu
To access the telephone menu. To enter a menu, to validate an action in a menu.
To make an Intercom call
(call to another handset).
To return to the previous menu. To delete characters. With
each press, the character preceding the cursor is deleted.

15
DETAILED BROWSER EXAMPLE: ADJUST THE DATE AND TIME
To access the date and time setting menu:
1 Press the key . The main menu is displayed on the screen.
2 Scroll through the menus to the Settings menu by pressing the top or bottom of the
browser key .
3 Enter the Settings menu by pressing the key .
4 Scroll through the menus to the Date/Time/Alarm menu by pressing the top or bottom
of the browser key .
5 Enter the Date/Time/Alarm menu by pressing the key .
6 Enter the Date & Time menu by pressing the key .
7 Scroll through the menus to the Enter time menu by pressing the top or bottom of the
browser key .
8 Enter the Enter time menu by pressing the key .
9 Enter the time: using the numeric keypad (hours then minutes).
10 Confirm your entry by pressing the key . The home screen displays the message Saved.
It is recommended to set the date and time accurately to allow you to keep track of the
timings of your calls and messages.
If you have the Display number option, the date and time will, depending on your operator,
be set automatically when you receive a call.

16
11 Scroll through the menus to the Enter date menu by pressing the top or bottom of the
browser key .
12 Enter the Enter date menu by pressing the key .
13 Enter the date using the numeric keypad (day, month and year) in the form DD/MM/YY.
14 Confirm your entry by pressing the key . The home screen displays the message Saved.
You have just set your phone’s current date and time. You can also set the date and time
display format (see “Setting the date and the time”, page 32).
Refer to the “Menu tree structure”, page 17 section to find out about your phone’s functions.
Procedures in your booklet
The procedures in your booklet are presented in the form of sheets.
To facilitate their implementation, each of them includes the following as appropriate :
• the keys associated to directly access the function described, and/or
• the path for accessing the function described in the menu.
EXAMPLE : TO (DE)ACTIVATE THE SILENT MODE
(Long press): means you can use the key(s) offered to access the function.
> Sound > Ringer >
Ringer volume > Off
means you can access this function by displaying the menu,
then going down the menus displayed to the function Ringer
volume and selecting the state Off.

17
Menu tree structure
Call log
Empty
Call log
All Calls
Missed calls
Ringer
External
Internal
Ringer volume
Tones
Key beep
Confirmation
Battery low
No coverage
Sound
Settings
Handset settings
Select base
Display
Contrast
Handset name
Language
Auto Answer
Register handset
De-Register
Handset Reset
Base settings
Ringer*
Tone
Pulse
Flash time
100 ms
250 ms
300 ms
600 ms
System PIN
Base reset
Memory keys*
M1
M2
M3
M4
Date/Time/Alarm
Date & Time
Time format
Date format
Enter time
Enter date
Alarm
Alarm On/Off
Enter time
Ringtone
Dial Mode
Ringtone
Ringer volume
* Only for D530P

18
Making and receiving calls...
Managing a call
Making a call
FROM THE HANDSET - METHOD 1
1 Dial your contact’s number.
If you make a mistake, press the key to delete the last character entered.
2 Press the key .
FROM THE HANDSET - METHOD 2
1 Press the key .
2 Dial your contact's number. A beep sounds.
At the end of the call, press the handset key and replace the handset on its base.
FROM THE BASE
Press one of the "M" keys, the Hands-free key lights up and the call is started.
To do this, the keys M1 to M4 must be programmed. For more details, see the section
“Defining the memory keys (M1 to M4) - D530P only”, page 37.

19
Receiving a call
1 Press the key to take the call.
2 At the end of the call, press the handset key and replace the handset on its base.
A beep sounds.
Options during a call
You can use the following options during a call:
Enable/Disable loudspeaker (speakerphone mode)
The icon appears on the handset screen when the hands-free mode is active.
HANDSET LOUDSPEAKER (during a call)
BASE LOUDSPEAKER (D530P ONLY) (during a call)
Your handset includes an Auto Answer. function. For further details, refer to the
“Answering automatically”, page 34.
When the battery charge icon is at minimum, the hands-free function is not available until
the next charging cycle.

20
Adjusting the volume
• To increase the volume, press in the browser or on the key on the right side of the
handset.
• To decrease the volume, press in the browser or on the key on the right side of the
handset.
• To increase the volume during a call, press the key on the left side of the handset. To
return to normal volume, press this key again.
The secret mode allows you to temporarily mute the line so that you are not heard by the caller.
Once enabled, the Mute On message flashes on the screen.
FROM THE HANDSET
, and ,
(during a call)
FROM THE (D530P BASE ONLY)
and
(communication in progress from the
base)
Enabling/Disabling the secret mode (during a call)

21
Managing several calls
Your phone allows you to take and manage several calls when you are already on the line
(depending on your line provider). These calls can be managed with the key .
During a call, a beep indicates the arrival of a second call.
To take this call, press the key then the key .
Your first call is put on hold and you can talk with the second caller.
During a call, press the key then dial your contact’s number.
Press the key then the key to switch from one call to the other.
The call in progress is then put on hold and you can take back the previous call.
Receiving a second call +
Making a second call + Number of your contact
Switching from one call to the other +

22
Press the key then the key to end the current call. You will return to the other call.
Press the key followed by the key .
You can then talk with your two contacts at the same time.
To end the 3-way conference, press the key .
Managing calls with the base D530P
With the D530P base there are more ways of sending and receiving calls using the key,
Which can be used not only to activate the hands-free mode, but also to take a call.
Receiving a call
Press the key to take a call from the base.
Ending one of the calls in progress +
Talking with two contacts at the same time
(3-way conference)
+

23
Using the Conference mode
When you are already connected from the handset, you can keep the handset call and activate
the hands-free mode on the base (Conference mode).
You can also speak to your correspondent from the handset and another person can join the
conversation from the base.
Press the key on the base to (de)activate the conference mode during a call on the
handset. Once it is activated, the message Conference is displayed.
Switching between the handset and the base
During a call on the handset, press the key on the base. You will then hear your contact
both on the handset and on the base (Conference mode).
• To end a call on the handset and continue on the base alone, press the on the handset.
• To continue the call only on the handset and end it on the base, press the key on the
handset then press the key on the base.
• During a call, if you have placed the handset on the base; pick it up again to continue the
call on the handset alone.
You may get feedback in Conference mode if the handset is too close to the base.

24
Using additional handsets
You can associate additional handsets with your phone: You can then make and receive
outside calls or calls between these handsets.
If you only have two paired handsets on the same base, the handset called rings automatically.
Simply take the call with the key.
If you have more than two paired handsets on the same base:
1 Press the key . Select the handset with the or key.
2 Press the key . The selected handset rings.
3 Take the call from the handset by pressing .
4 End the call by pressing .
Calling another handset (intercom)
Transferring a call to another handset (during communication)
You first have to pair the handsets with the base.
For further details, refer to the “Associating a new handset”, page 34 .
You must have at least two handsets paired on the same base.

25
If you only have two paired handsets on the same base, the call is transferred directly to the
second handset. Simply take the call on the second handset with the key and hang up the
call on the first handset with the key.
To cancel the transfer before hanging up the second handset, press the key.
If you have more than two paired handsets on the same base:
1 Select the handset to which you want to transfer the call using the or key.
2 Press the key . The handset called rings.
3 Pick up the other handset and then transfer the call by pressing .
During a call, you can have a second person in your home take part by activating the call on
the second handset. To do this, you must have paired both handsets to the base.
1 Take your contact's call as usual by pressing the key on your handset.
2 During the call, press the key.
3 If necessary select the desired handset with the or key.
The selected handset will ring. Your contact is put on hold.
4 Connect the call to the second handset with the key.
5 On the first handset, press the key to display the call options.
6 Select the Conference option with the or key, then press .
You can then all talk to each other. The handsets display the message Conference.
3-way conference

26
Using the phonebook
1 Press the key . The directory opens. If there are no entries, the message Empty is
displayed.
2 Press the key .
3 Select New entry with the or key and press .
4 Specify the required information by confirming at each step with :
• Name: enter your contact’s name,
• Number: enter their number,
• Group: if necessary, select the group in which to include the contact.
Call the contact from their entry
1 Press the key . The directory opens.
2 Select the contact to call with the or key.
3 Press the key .
4 Select the option Call and press .
You can also press the key to call the contact selected in the directory directly.
Create an entry

27
Search for an entry
2 Enter the first letter of the name.
Changing an entry
2 Select the entry to be modified with the or key.
3 Press the key .
4 Select the option Edit and press .
5 Change the name and/or number and/or number type and confirm with .
Deleting an entry
2 Select the entry to be deleted with the or key.
3 Press the key .
4 Select the option Delete and press .
5 Confirm the deletion by pressing the key.
The action Delete deletes the selected entry. The action Delete all deletes all the entries in
the directory.

28
Checking available directory space
2 Press the key .
3 Select the option Capacity and press .
4 The number of existing entries is displayed with the total possible number (2/50).
Associating a Speed dial number with an entry
Speed dial allows you to associate a numeric key, for example key , with an entry in your
directory.
Once you have made the association, you can dial your contact's number automatically by long
press on the associated key (e.g ).
2 Press the key .
3 Select the option Speed dial and press .
4 Select with or the numeric key of your choice and press .
5 Select the desired contact with or and press .

29
Transferring entries from one handset to another
Each handset has its own phonebook. To transfer one or more entries from a phonebook to
another handset:
2 Press the key .
3 Select the desired option and press .
• COPY: to transfer the current entry.
• COPY ALL: to transfer all the directory entries.
4 Select the handset to which the data are to be transferred.
The receiving handset rings and displays the message Accept PB Entries?.
5 Accept the transfer on the destination handset by pressing the key .
Locating your handset
If you have misplaced your handset, press the key on the base. The handset rings.
You must have at least two handsets paired on the same base.

30
Listening to your messages
If you have a voice mail service with your line provider, dial the number given by your line
provider directly.
Follow the instructions given by your line provider to listen to and manage your messages.
The icon appears on the handset screen when you have at least one new message.
Locking / Unlocking the keypad
You can lock the keypad when you are not making a call.
Give a long press on the key to lock and unlock the keypad.
The message Keypad locked and the icon appear on the handset screen when the keypad
is locked.

31
Setting up...
The phone
You can change the ringing tone of:
• outside calls,
• calls between handsets (intercom).
Scroll through the pre-recorded ring tones and confirm with .
Select the sound level and validate with .
Select the option Off and validate with . The message Ringer off and the icon appear
on the handset screen when the silent mode is active.
Changing the ringing tone > Sound > Ringer > External and
Internal
Modifying the ringing volume > Sound > Ringer > Ringer
volume
Enabling/Disabling the silent mode > Sound > Ringer > Ringer
volume
You can also activate / deactivate the silent mode by a long press on the key.

32
The audio alerts apply to:
• keypad keys pressed,
• confirming a menu,
• low battery,
• loss of signal between the base and the handset.
Select the desired state, On or Off, and validate with .
1 Select the desired Time format: 24 Hour or 12 Hour.
2 Select the desired Date format: dd/mm (day, month) or mm/dd (month, day).
3 Enter the hour in Enter time: starting with the hours and then the minutes.
4 Enter the date in Enter date.
For further details, refer to the “Illustration”, page 14.
Enabling/Disabling audio alerts
> Sound > Tones > Key beep
and Confirmation and Battery low
and No coverage
Setting the date and the time > Settings > Date/Time/Alarm >
Date & Time

33
The handset
This function allows you to specify the priority base to be used for making calls.
Select the base that the handset should use first and confirm with .
Select the desired level of contrast and validate with .
You can personalise the name of your handset. Enter the desired name and validate with .
Select the language to be used and confirm with .
Define the priority base for a handset > Settings > Handset settings >
Select base
Adjusting the contrast > Settings > Handset settings >
Display > Contrast
Personalising the name of a handset > Settings > Handset settings >
Display > Handset name
Changing the display language > Settings > Handset settings >
Language
Only if you have paired the same handset on several bases.

34
With this function you can answer a call simply by lifting the handset from the base.
Your phone allows you to associate other handsets with the base.
You then have to pair them so that they are recognized.
FROM THE BASE:
1 Enable the base pairing mode.
Refer to section“Enabling the pairing mode”, page 35.
FROM THE HANDSET:
2 Enable the handset pairing mode.
3 Enter the base code if necessary (by default 0000).
Once the handset is registered, the pairing mode is automatically exited.
Answering automatically > Settings > Handset settings >
Auto Answer
Associating a new handset > Settings > Handset settings >
Register handset

35
1 Enter the base code and confirm with .
2 Select the handset to unpair from the base and validate with .
When you reset your handset, all the settings are returned to their initial values
(factory settings), except for the phonebook.
Follow the instructions on the screen and confirm.
The base
You enable the pairing mode when you associate an additional handset, for example.
Give a long press on the key on the base.
On the base D530P only, the key flashes: the base is in pairing mode.
Removing a handset registered on the base > Settings > Handset settings >
De-Register
Resetting the handset > Settings > Handset settings >
Handset Reset
Enabling the pairing mode (long press)
The default code is 0000.

36
1 Enter the current code and validate with .
2 Enter the new code and validate with .
3 Re-enter the new code to confirm and validate with .
When you reset your base, all the settings are returned to their initial values (factory settings),
except for the phonebook.
Follow the instructions on the screen and confirm.
Scroll down the pre-recorded ring tones and validate with .
Changing the default code > Settings > Base settings >
System PIN
Resetting the base > Settings > Base settings >
Base reset
Modifying the base ring tone - (D530P only) > Settings > Base settings >
Ringer > Ringtone
Your base will remain in pairing mode for about 1 minute

37
Select the sound level and validate with .
Use this menu to set your favourite numbers and associate them with direct call keys M1 to M4
on the base.
1 Select the key to set and validate with .
2 Enter the telephone number to associate with this key and validate with .
Modifying the base ring tone volume -
(D530P only)
> Settings > Base settings >
Ringer > Ringer volume
Defining the memory keys (M1 to M4) -
D530P only
> Settings > Memory keys
Pressing the defined keys M1 to M4 will now automatically call the saved number.

38
The line
You can use a voice frequency [Tone] or pulse [Pulse] based dialling system .
Select the desired system and validate with .
You can configure the flash duration if you use your phone abroad or on a private network.
Select the desired value and validate with .
Changing the dialling type > Settings > Base settings > Dial Mode
Changing the flash duration > Settings > Base settings > Flash time
We do not recommend that you change line settings without first contacting your line provider,
as this may result in your phone line being disconnected.

39
Alarm...
The alarm
To program the alarm:
1 Depending on the alarm status, enable or disable the Alarm function.
2 Select the time at which you want to be woken up.
3 If necessary, change the ring tone.
For further details, refer to the following sections.
Finding out the alarm status
When the icon is displayed on the handset screen the alarm is activated.
Programming the alarm > Settings > Date/Time/Alarm > Alarm
Enabling / Disabling the alarm > Settings > Date/Time/Alarm > Alarm >
Alarm On/Off
The alarm sounds through the handset speaker.
To stop the alarm clock, press any key on the handset.

40
Once the alarm is enabled, the icon is displayed on the screen.
1 Enter the desired time and validate with .
2 Select the desired repetition frequency:
• Once: a single time on the same day or on the following day at the set time.
• Daily: every day at the set time.
3 Validate with .
Scroll down the list of available ring tones and confirm with .
Defining the wake-up time > Settings > Date/Time/Alarm > Alarm > Enter time
Changing the ringing tone > Settings > Date/Time/Alarm > Alarm > Ringtone
When the 12-hour time format is set, use the key to switch between AM
(before 12 o'clock) and PM (after 12 o'clock).

41
Tracing your calls...
Call logs
Logs are lists of numbers or events received by your phone.
Depending on your line provider, call logs contain the following information :
• your contact’s name or number,
• the call time or date.
Scroll through the list of stored numbers. Missed calls are preceded by a black dot.
You can use the options described in section “Managing incoming or outgoing calls”, page 42.
A shortcut is set as default for the key to access the log directly.
Scroll through the list of stored numbers.
You can use the options described in section “Managing incoming or outgoing calls”, page 42.
Viewing the received call log > Call log
Viewing the dialled call log

42
Managing incoming or outgoing calls
Use the following options from the call list to:
• Details: display the information about the selected call,
• Delete: delete the selected log entry,
• Delete all: delete all the numbers in the list.
• Call: call the displayed number,
• Store number: save the number in your phonebook,
1 Select the type of call to display in the incoming call log
- All Calls,
- Missed calls only.
2 Validate with .
The events log
A screen message tells you that you have received a call or voice mail in your absence:
• Message !: tells you that there is voicemail on your line provider's answering system,
• New. call: tells you that there is a missed call,
• New. calls: tells you that there are several missed calls.
Configuring the incoming calls log > Call log > Call log

43
Environment
Environmental protection and sustainable development is an important priority for Sagemcom. Sagemcom
has a policy of using environmentally- friendly systems and makes environmental protection an essential
part of the life-cycle of its products – from the manufacturing, to the installation, operation and disposal.
Packaging
The logo (green point) on the packaging means that a fee is paid to an authorised national
organisation to improve packaging recycling and the recycling infrastructure. Follow the local
sorting regulations for this type of waste product in order to improve recycling.
Batteries
If your product contains batteries, they must be disposed of at the designated collection points.
The product
The crossed out dustbin displayed on the product signifies that it belongs to the electrical and
electronic equipment group. The European regulations request you to carry out your own selective
recycling collection at :
•the sales outlet when you buy a similar new device.
•the collection points available in your area (recycling centres, sorting points, etc).
This means you participate in the recycling and valorisation of used electric and electronic goods
which would otherwise have a negative impact on the environment and health.

44
Guarantee
Terms and Conditions for United Kingdom & Ireland only.
In order to apply the guarantee, you should contact the Sagemcom Helpdesk or the retailer where you
purchased the equipment. Proof of purchase will be required in either case.
Please make sure that you use your equipment only for the purpose for which it was designed and under
normal usage conditions.
Sagemcom do not accept any liability for the equipment if used outside the frame of its original designed
purpose or any consequence that may arise from this usage.
Should any malfunction arise, the Sagemcom Helpdesk or your retailer will advise you how to proceed.
A)General Guarantee conditions
Sagemcom undertakes to remedy by repair or exchange at its own convenience, free of charge for labour
and replacement parts, any defects in the equipment during the guarantee period of 12 (twelve) months
or 3 (three) months for accessories, from the date of original invoice of the Equipment, where those defects
are a result of faulty workmanship.
Unless the customer has concluded with Sagemcom a maintenance contract in respect of the equipment
which specifically provides for repairs to be carried out at the customer`s premises, the repairs will not be
carried out on the equipment at the customer premises.
The customer must however return the defective equipment at his/her own expense, to the address
supplied by the Sagemcom Helpdesk or by the retailer.

45
In the case that a product needs to be sent in for a repair, it must always be accompanied by a proof of
purchase (which is not altered, written on or in any way made illegible) showing that the product is still
under guarantee. In the case that no proof of purchase is enclosed, the Sagemcom repair centre will use
the production date as its reference for establishing the guarantee status of the product.
Apart from all legal obligatory rules, Sagemcom, do not give any Guarantee, either implicit or explicit which
is not set force in the present section, and can not be held responsible for any direct or indirect, material
or immaterial damage, either in or out of the frame of the present guarantee.
If any provision of this guarantee shall be held to be in whole or in part invalid or illegal due to an obligatory
rule applicable to consumers pursuant to their national legislation, such invalidity or illegality shall not
impair or affect the remaining provisions or parts of this guarantee.
This guarantee does not affect the Customer statutory rights.
B)General Guarantee conditions
Sagemcom shall have no liability under the guarantee in respect of:
• Damage, defects, breakdown or malfunction due to one or more of the following :
- Failure to properly follow the installation process and instructions for use
- An external cause to the equipment (including but not limited to: lightening, fire, shock, vandalism,
inappropriate conditions of electrical network or water damage of any nature)
- Modifications made without the written approval of Sagemcom
- Unsuitable operating conditions, particularly of temperature and humidity
- Repair or maintenance of the equipment by persons not authorised by Sagemcom
• Wear and tear from normal daily use of the equipment and its accessories
• Damage due to insufficient or bad packaging of equipment when returned to Sagemcom
• Usage of new versions of software without the previous approval of Sagemcom
• Work on any equipment or software modified or added without the prior written consent of Sagemcom

46
• Malfunctions not resulting from the Equipment or from software installed in user workstations for the
purpose of use of the equipment.
• Communication problems related to an unsuitable environment including
- Problems related to access and/or connection to the Internet such as interruptions by access
networks or malfunction of the line used by the subscriber or his correspondent
- Transmission faults (for example poor geographical coverage by radio and TV transmitters,
interference or poor line quality)
- Local network faults (wiring, servers, workstations) or the failure of the transmission network (such
as but not limited to interferences, fault or poor quality of the network)
- Modification of the parameters of the cellular or broadcast network carried out after the sale of the
Product
• Normal servicing (as defined in the user guide supplied with the equipment) as well as malfunctioning
due to servicing not being carried out. Servicing costs are in any event always borne by the customer.
Malfunctions resulting from the usage of products, consumables or accessories not compatible with the
equipment.
C) Out of Guarantee Repairs
In the cases set forth in B) as well as after expiry of the guarantee period, the customer must ask the
Authorised Sagemcom Repair Centre for a cost estimation prior to work being carried out.
In such cases, the repair and delivery costs will be invoiced to the customer.
The foregoing shall apply unless otherwise agreed in writing with the customer and only for the United
Kingdom and Ireland.

Sagemcom Broadband SAS
250, route de l'Empereur
92848 Rueil-Malmaison Cedex - France
Tel. +33(0)1 57 61 10 00 - Fax : +33(0)1 57 61 10 01
www.sagemcom.com
253456941-A-02/2012
Allrightsreserved.SagemcomBroadbandSASreservestherighttochangethetechnicalcharacteristics
ofitsproductsandservicesortostopmarketingthematanytime.Theinformationandspecifications
includedaresubjecttochangewithoutpriornotice.SagemcomBroadbandSAStriestoensurethatall
informationinthisdocumentiscorrect,butdoesnotacceptliabilityforerrororomission.Noncontractual
document.Alltrademarksareregisteredbytheirrespectiveowners.Simplifiedjointstockcompany-
Capital35703000€-518250360RCSNanterre

Sagemcom D530P Digital Cordless Phone User Guide

More Related Content

What's hot (19)

Viewers also liked (20)

Similar to Sagemcom D530P Digital Cordless Phone User Guide (20)

More from Telephones Online (20)

Recently uploaded (20)

Sagemcom D530P Digital Cordless Phone User Guide