Sap2000 v10
7 likes11,430 views
SAP2000 is finite element analysis software for structural engineering that allows 3D modeling and analysis of structures like buildings and bridges. It can analyze static and dynamic load cases, perform reinforced concrete and steel design, and has modules for bridge, offshore, and soil-structure interaction modeling. The software features a powerful graphical interface for modeling, analysis, post-processing, and design within a single integrated environment.
Sap2000 v10
- 1. SAP2000 v10 - Page 1 / 13 SAP2000 v10 STATICS, DYNAMICS and EARTHQUAKE ENGINEERING FINITE ELEMENT ANALYSIS and DESIGN SOFTWARE for STRUCTURES and BRIDGES www.caeplDhaka.com; www.csiberkeley.com; www.computersandstructures.com Tel: 8802 9676 269 Mob: 0152 329243 E-Mail: souren@caeplDhaka.com Three Dimensional Static and Dynamic Finite Element Analysis and Design of Structures; Nonsymetrical and Symetrical Structures; True 3-D fast modeling , Very Large Models and Fast Run. Reinforced Concrete, Steel and Aluminum Frame Design, Shell R.Concrete Design, Cold Rolled Steel Shapes Modal Analysis, Response Spectrum, Time History; Linear and Nonlinear Analysis, Pushover Analysis, Base Isolators, Viscous Dampers, Power Spectral Density, Staged Construction, Soil-Structure Interaction, Explosion Analysis, Time dependent Creep and Schrinkage. Design of Bridges, Industrial Structures, Transmission Towers, Machine Foundations, Piled Foundations, Stacks, Cooling Towers, Water Dams, Power Facilities, Cable Structures, Sports Facilities, Performance Venues and other Special Structures Bridge Module
- 2. SAP2000 v10 - Page 2 / 13 SAP2000 v10 in Detail SAP2000 represents the most sophisticated and user-friendly release of the SAP series of computer programs. It features a powerful graphical interface unmatched in terms of ease-of-use and productivity. Creation and modification of the model, execution of the analysis and checking and optimization of the design are all done through this single interface. Graphical displays of the results, including real-time animations of time-history displacements are easily produced. SAP2000 offers a quantum leap forward in the way models are created and modified, and in the way analysis and design are managed. The SAP name has been synonymous with state-of-the-art analytical solutions since the introduction of SAP, SOLIDSAP, and SAP IV over thirty years ago. To these sophisticated numerical techniques, SAP2000 adds a tremendously easy and complete graphical user interface linked with powerful design capabilities, providing the structural engineer an analysis and design program unequaled in efficiency and productivity. The analytical capabilities are just as powerful, representing the latest developments in numerical techniques and solution algorithms. This release is available in three different analytical versions all sharing the same graphical interface: SAP2000, SAP2000 PLUS, and SAP2000 Advanced. SAP2000 BASIC is fully integrated with Windows 2000/XP featuring a powerful graphical interface unmatched in ease-of-use, sophistication and productivity, and it includes: 2D and 3D Beam, Column and Truss Element, 3D Shell Element, Spring Element, P-Delta Analysis Option, Steel and Concrete Design, Static and Dynamic Response Spectrum Analysis, 1500 Joint Capacity SAP2000 PLUS program adds unlimited capacity, moving loads-analysis capabilities, a complete range of finite elements and time-history analysis options. Ground motion effects with multiple-base excitations can be included. PLANE Element, ASOLID Element, SOLID Element, Dynamic Time History Analysis, Moving Load Analysis, Bridge Module Add-on SAP2000 ADVANCED extends the capabilities of the PLUS version by adding static pushover analysis and dynamic nonlinear analysis capability. The pushover analysis uses frame plastic hinge elements. The dynamic nonlinear analysis uses a nonlinear link element to model gaps, hooks, isolators, dampers and plastic hinges. Buildings and bridges with passive energy absorbtion systems and base isolator systems can be analyzed. nonlinear analysis options: Frame Plastic Hinge Element, Nonlinear Link Element, Wilson FNA Method, Pushover Analysis, Bridge Module Add-on, Offshore/Wave Module Add-on, Staged Construction Add-on, Soil-Structure Interaction Module (SASSI) Add-on. All of these programs feature sophisticated capabilities, such as very fast equation solvers, force and displacement loading, non-prismatic frame elements, highly accurate shell elements, Layered Shell elements, Eigen and Ritz dynamic analysis, multiple coordinate systems for skewed geometry, many different constraint options, the ability to merge independently defined meshes and the option to combine or envelope multiple dynamic analyses in the same run. Powerful and completely integrated design modules for steel, Aluminum, cold formed steel and concrete, all available from within the same interface used to create and analyze the model. The design of steel frame members features initial member sizing and iterative optimization. The design of concrete frame and shell members includes the calculation of the amount of reinforcing steel required. Members can be grouped for design purposes, and a single mouse click on an element brings up the detailed design calculations. SAP2000 supports the latest International codes and Eurocodes.
- 3. MODELING and USER FRIENDLY GRAPHICAL INTERFACE: New physical object based modeling enviroment • Automated templates for typical structures • Easy and Enhanced drawing tools with several new snaps • Automatic creation of various direction wind loadings for ASCE 7-02• Enhanced selection options • Enhanced extrusion routines • Curved frame, cable and tendon elements • Shell and solid internal meshing • Enhanced shell mesh editing • Auto line constraints for mismatched shell meshes • Auto transfer of area loads to frames • Open-structure wind loads • IBC 2003 seismic and wind loads • Chinese Building Code seismic and wind loads • Lane definition independent of frames • Area-object thickness and joint offset overwrites • Powerful new 2D and 3D model builder • 3D model generation using plans, elevations and developed views • Editing with move, merge, mirror and replicate • Accurate dimensioning with guidelines and snapping • Cut, copy and paste options • Unlimited levels of undo and redo • Quick draw options to create elements with one mouse click • Powerful grouping, selection and display options • Onscreen assignment of properties, loading and supports • Multiple views in 3D perspective with zooming and panning • Orthographic and user defined views • Copy/Paste to and from spread sheets and Access Database • Multiple rectangular and cylindrical coordinate systems • Detailed context sensitive online help • Analysis integrated with postprocessing and design • Right button click for instantaneous current element or joint information •Fast OpenGL graphics now available for drawing and display windows • Enhanced OpenGL viewer • Enhanced animation capability • Enhanced tabular display options • Enhanced lane displays showing lane loading points • Influence surface displays • Display of automated loads • Graphical section cut definitions for forces and stresses • Analysis case tree display • 3D rendering and flythrough views • Interactive spreadsheet input of model geometry, loading and assignments • 3D perspective graphical displays of undeformed and deformed structural geometries • Static deformed shapes and mode shapes • Bending moment and shear force diagrams • Stress contours • Animation of deformed shapes and mode shapes • Animated stress contours • Multiple windows displaying different parameters • Instantaneous graphical and tabulated output details for specific joint or element with right button click • Static and dynamic load combinations and envelopes. IMPORT – EXPORT OPTIONS: Import: ACCESS (.mdb) file, EXCEL (.xls), CIS/2 STEP, FrameWorks Plus, IGES (.igs), Nastran.dat, Strudl/Staad (.std/.gti), Prosteel, IFC - TEKLA (Xsteel) Export: AutoCAD (.dxf), ACCESS (.mdb), EXCEL (.xls), CIS/2 STEP, FrameWorks Plus, IGES (.igs), Steel Detailing Neutral File (SNDF)-Xsteel, Prosteel, IFC-TEKLA (Xsteel), Capture graphics of any SAP2000 Window. SAP2000 v10 - Page 3 / 13
- 4. POST TENSIONING Tendons in frame, shell, solid elements • Creep, shrinkage, relaxation, anchorage slip, elastic shortening losses • Tendons can be placed with arbitrary geometry STEEL AND CONCRETE DESIGN Strength & drift controlled optimization • Concrete Shell Design - Display showing required rebar intensity and maximum concrete stress • Layered Shell Element • Fully interactive and graphical steel and concrete frame member design • AISC (ASD and LRFD), ACI, British and Eurocodes • Design for static, moving and dynamic (response spectrum and time history) loads • Ductile and non-ductile design • Member grouping for design envelopes • Detailed onscreen design information with right button click • Steel member selection and optimization • Graphical section builder for built-up sections and concrete rebar location • Biaxial moment-axial load column interaction diagrams. Concrete Design Codes: AASHTO Concrete 97, ACI 318-05/IBC 2003, ACI 318-02, ACI 318-99, BS 8110 89, BS 8110 97, CSA CSA-A23.3-94, EUROCODE 2-1992, Indian IS 456-2000, Italian DM 14-2-92, KCI-1999, Mexican RCDF 2001, NZS 3101-95, UBC 97, Chineese. Structural Steel Design Codes: AASHTO Steel 04, AISC-ASD01, AISC ASD89, AISC-LRFD99, AISC-LRFD93, API RP2A-LRFD97, API RP2A-WSD2000, ASCE 10-97, BS5950 90, BS5950 2000, CISC95, EUROCODE3- 1993, Indian IS 800-1998, Italian UNI 10011, UBC97-ASD, UBC97-LRFD, IBC 2003 Wind and Seismic loads, Design of power transmission towers and similar structures (ASCE-10-97 2000), API Tank Design, International Building Codes, European Codes. Aluminyum Frame Design: U.S.A. Alum. Assoc. ASD 2000, LRFD 2000 Cold Rolled Steel Shapes Design: AISI – ASD 1996 (Ek 1999), AISI – LRFD 1996 (Add. 1999) Section Designer: Integrated generation of arbitrary steel and concrete cross sections • Parametric shape generation • Section property calculations • Three dimensional axial force and biaxial interaction diagrams • Moment-curvature relationships. Customable Report Writer: Generation of analysis and design reports in customizable format • Output to Word (RTF), Internet Explorer (HTML), text editor and printer • Any input or output table may be added to report • Information in the tables may be filtered and sorted • Display units may be user specified for any numerical field in a table. SAP2000 v10 - Page 4 / 13
- 5. SAP2000 v10 BASIC STATICS-DYNAMICS, BEAM, COLUMN, FRAME, PLATE, SHELL, SPRING, RESPONSE SPECTRUM. REINF. CONCRETE, STEEL, ALUMINUM and COLD ROLLED STEEL DESIGN, P-DELTA ANALYSIS THE BASIC OBJECTS LINE OBJECTS: The 2D and 3D Beam and Truss Element Curved beam element • Multiple non-prismatic segments over element length • Point, uniform and trapezoidal loading in any direction • Temperature and thermal gradient loading • Prestress loading • Automated end offset evaluation • Moment and shear releases • Built-in steel sections • Frame member cardinal points and joint offsets. AREA OBJECTS: The 3D Shell Element General quadrilateral or triangular element • Layered Shell Element • Orthotropic materials • Six degrees of freedom per joint • Shell, plate or membrane action • Gravity, uniform, pressure, temperature and thermal gradient loading POINT OBJECTS: The Spring Element Joint to ground (support) spring • Automatic spring calculation from foundation surface • Global and skewed springs • Coupled 6x6 user defined spring stiffness option (for foundation modeling) • Fully-coupled 6x6 linear spring and dashpot • Link degrees of freedom can be rigid to act as constraints or restraints ANALYTICAL OPTIONS Numerous enhancements have been made in the analysis to increase efficiency and minimize memory usage. New analysis features added include: New Solver - Added alternate solver for extremely efficient runtimes and storage utilization • New Eigen Solver - Added alternate Eigen solver for efficient solution of systems with large variations in stiffness and mass properties • Static and/or dynamic response spectrum analysis • P-delta analysis with either static or dynamic analysis • Blocked active column equation solver • Automated fast profile optimization • Generalized joint constraint options including rigid bodies, diaphragms, rods and welds • Applied force and applied displacement loading • Gravity, pressure and thermal loading • Eigen analysis with an accelerated subspace iteration algorithm • Ritz analysis for fast predominant mode evaluation for earthquake loads • Multi-directional response spectrum analysis • Multiple response spectrum cases in single run • Modal combination by the SRSS, the CQC or the GMC (Gupta) method • Directional combinations by the ABS or the SRSS method • Static and dynamic response combinations and envelopes • Control over selective execution of analysis cases • Automatic multiple run batch capability from inside GUI • Variety of built in response spectrum input functions . SAP2000 v10 - Page 5 / 13
- 6. SAP2000 v10 PLUS UNLIMITED CAPACITY, SOLID ELEMENTS, TIME HISTORY, MOVING LOAD ANALYSIS, FREQUENCY DOMAIN ANALYSIS, BRIDGE ADD-ON MODULE SAP2000 PLUS ELEMENTS SAP2000 PLUS extends the capabilities of the BASIC version with unlimited capacity and following additional analytical capabilities. 3D-OBJECTS: ASOLID ELEMENT 3 to 9 nodes axisymmetric element • Orthotropic material properties • Gravity, thermal, surface pressure and pressure gradient loading options SOLID Element: Three dimensional 8 node brick element • Anisotropic material properties • Gravity, thermal, surface pressure and pressure gradient loading options. DYNAMIC TIME HISTORY ANALYSIS: Ground acceleration excitation • Multiple base excitations • Load forcing functions • Transient or steady-state • Multiple Time History Cases • Time history Windows AVI file • Graphic displays of nodal and element time history records • Functions vs time or function vs function displays • Generation of response spectrum curves for any joint acceleration component • Results can be combined with other loads for enveloping or step by step steel and concrete design • Variety of built in input functions for time history analysis . FREQUENCY DOMAIN ANALYSIS Steady state analysis • Power Spectral Density (PSD) analysis • Frequency dependent properties for links/supports SAP2000 v10 - Page 6 / 13
- 7. MOVING LOADS ANALYSIS: Vehicles can load frames, shells or solids • Three dimensional influence surfaces • Vehicle width effects included • Live-load analysis includes transverse positioning of the vehicles • Alternate Moving-load analysis using Multi- step loading (static or dynamic) • Support for AASHTO-LRFD and BS 5400-2 • Moving-load response available for section cuts • AASHTO, User-defined truck, lane and train loads • Determination of maximum and minimum displacements and reactions • Capable of handing complex lane geometries • Automatically calculates all possible permutations of traffic loads • Results can be combined with other loads for enveloping or corresponding components for steel and concrete design SAP2000 v10 - Page 7 / 13
- 8. SAP2000 v10 ADVANCED STATIC PUSHOVER, BASE ISOLATORS, VISCOUS DAMPERS, STRUCTURAL POUNDING, LARGE DISPLACEMENTS, CABLE ELEMENT, NONLINEAR TIME HISTORY, SHELL BUCKLING. SAP2000 NONLINEAR ELEMENTS SAP2000 Advanced extends the capabilities of the PLUS version to include following nonlinear analysis options. The Frame Plastic Hinge Element for use with Static Pushover Analysis Axial, flexural, shear and torsional hinge • Axial load - biaxial moment interaction • Multilinear behavior including softening • P-Delta options Pushover Analysis Options Static Pushover Analysis starting from gravity loads • Force or displacement control • User defined lateral load patterns • Effective damping computations • Capacity Spectrum computation • Demand-Spectrum computation • FEMA 356 Hinges • Force Controlled Hinges • Caltrans Column Section Hinges • Fiber Hinges • Improved Pushover Hinge Results Display • ATC 55/FEMA 440 support The SAP2000 Nonlinear Link Element for use with the dynamic time history analysis option Link may be placed between any two joints or from joint to ground • Viscous damper with nonlinear exponent on velocity term • Gap (compression only) and Hook (tension only) • Uniaxial plasticity (all 6 degrees of freedom) • Base isolator with biaxial plasticity behavior • Base isolator with friction and/or pendulum behavior • AVI file option for creating real time displays of nonlinear deformation behavior • Force versus Deformation plots of nonlinear systems for energy dissipation studies. Other features: Large deformation cable element • Tension only/compression only frame elements • Nonlinear dynamic direct integration time history analysis • Static and dynamic large displacement analysis across all element types • Stiffness and mass proportional damping • Nonlinear buckling analysis • Steady-State analysis with damping • Frame and shell property modifiers for cracking . SAP2000 v10 - Page 8 / 13
- 9. SAP2000 v10 ADD-ON MODULES OBJECT BASED BRIDGE DESIGN MODULE Add-on for SAP2000 v10 PLUS and for v10 ADVANCED The Bridge Design Module adds capability to easily model complicated bridge geometry using Bridge Designer’s terminology. Specifically included are: Layout-line definition for bridge elements and lanes using bearings and stations • Layout-line has horizontal and vertical curves and transitions • Parametric cross-section definitions • Cross-section parameters can vary along length of bridge • Bridge definition includes spans, abutments, hinges, bents and superelevation • Abutments, bents and hinges can be skewed • Post-tensioning layout • Automatically creates spine (frame), shell or solid- element models • Structural model can remain linked to Bridge objects for quick editing • Display of integrated forces and stresses along bridge PARAMETRIC BRIDGE MODELING: Parametric Bridge Model Templates • Model Auto-updates with Parameter Changes • Parametric Cross Section Variations • Parametric Bridge Layout Lines • Super-elevations, Curves and Skews • Lane Definitions Independent of Structure • Abutments, Bents and Hinges • Improved Bridge Modeler for Steel Bridges • Display Bridge Results on a Girder by Girder Basis BRIDGE MODEL GENERATION WIZARD: Guided step-by-step creation of complete bridge model • Detailed instructions for every step • Finished model is ready to run SAP2000 v10 - Page 9 / 13
- 10. ADVANCED ANALYSIS OPTIONS: Pushover analysis using fiber models • Isolators, dampers, plasticity, contact- friction • Pounding effects at skewed abutments • Buckling analysis • P-delta and large deflections • Nonlinear cables • Nonlinear dynamics by modal, implicit, or explicit methods • Frequency-domain analysis • All analyses use the same model • Analytical Power of SAP2000 ADVANCED • Segmental Construction Analysis • Time Dependent Creep & Shrinkage Analysis • Pushover Analysis using Fiber Models • Bridge Base Isolation & Gaps • Nonlinear Large Deformation Cable Analysis • High Freq. Blast Dynamics using Wilson FNA • Nonlinear Dynamics & Buckling Analysis • Multi-Support Seismic Excitation • Animated Views of Moving Load Analysis BRIDGE OBJECT DEFINITION: Quick definition of bridge geometry • Spans with section variations along length • Abutments with linear/nonlinear support conditions • Bents with single or multiple columns • Hinges with linear/nonlinear behavior • Abutments, bents, hinges can be skewed • Post-tensioning definitions • Auto generation of bridge structural model • Structural model remains linked to bridge objects for quick editing 3-D INFLUENCE SURFACES: Influence surfaces can be plotted for all displacements, reactions, forces, and stresses • Multiple Display options are available • Tabular data can be exported • Influence surfaces are used for moving-load envelope calculation SAP2000 v10 - Page 10 / 13
- 11. BRIDGE POST TENSIONING: Quick post-tensioning layout • Tendons in frame, shell, solid elements • Creep, shrinkage, relaxation, anchorage slip, elastic shortening and friction losses • Prestress tendons can be represented as loads or elements for analysis • Explicitly model time-dependent effects using tendons represented as elements BRIDGE LAYOUT DEFINITION: Quick Definition of Highway Layout • Layout line definition for bridge components and lanes using bearings and stations • Layout line has horizontal and vertical curves and transitions • Super- elevation definitions BRIDGE LANE DEFINITION: Quick definition using bridge layout line or existing frames • Lane width effects • Auto application of lane loads to bridge structure • Lane influence lines and surfaces SAP2000 v10 - Page 11 / 13
- 12. PARAMETRIC BRIDGE CROSS SECTIONS: Quick definition of variety of bridge cross sections • Concrete box girder sections • Concrete tee beam sections • tSeel composite bridge sections • Section parameters can vary along length of bridge • Automatic generation of frame (spine), shell or solid model from parametric section • Model automatically updates with change in parameters • Easily switch between different types of models STAGED CONSTRUCTION ANALYSIS: Add and remove objects, supports, and loads in arbitrary sequence • Behavior may be linear or nonlinear • Consideration of time-dependent effects: aging, creep, and shrinkage • Multiple staged-construction scenarios are possible BRIDGE RESULTS AND DESIGN: AASHTO LFD and LRFD design checks • Influence lines and surfaces display • Forces and stresses along and across bridge • Displacement plots • Animated stress plots • Graphical and tabulated outputs • Moving Loads with 3D Influence Surface • Moving Loads with Multi- Step Analysis • Various Standard & User Defined Vehicles • P/T Concrete Box Girder Design • Composite Steel Deck Bridge Design • Straight & Curved Girder Design • AASHTO, LFD & LRFD Codes • Dynamic Effects of Moving Loads ENHANCED FRAME HINGE MODEL: P-M-M interaction with load-dependent moment-curvature relationships • New Section Designer considers Mander model for confined concrete • Caltrans shapes and hinge behavior • Fiber model options • FEMA 356 recommendations ADDITIONAL NONLINEAR LINK BEHAVIOR : Pivot-hysteresis and Takeda models for plasticity • Double-acting friction-pendulum isolators SAP2000 v10 - Page 12 / 13
- 13. SAP2000 v10 - Page 13 / 13 SAP2000 v10 ADVANCED ADD-ON MODULES: SAP2000 Staged Construction Module The Staged Construction Module adds capability to consider staged construction sequencing for any model. Time dependent effects such as creep and shrinkage can be included in staged construction analyses. Specifically included are: Staged construction sequencing allowing Adding or Removing members • Staged construction sequencing allowing Adding or Removing loads • Staged construction sequencing allowing Adding or Removing supports • Time dependent concrete age effects (FIP-CEB) • Time dependent creep and shrinkage (FIP-CEB) Time dependent prestressing steel relaxation (FIP-CEB) • Explicitly model time- dependent effects using tendon elements SAP2000 Offshore/Wave module The Offshore Module adds capability to easily apply wave loading to offshore structures and includes API design. Specifically included are: Wave load generator • API steel frame design • API punching shear checks • API Simplified fatigue analysis Soil-Structure Interaction Module (SASSI) • Multi-linear springs (e.g., P-y and T-z curves) can be assigned per-unit-length on line objects, such as piles, and per-unit-area on area objects, such as retaining walls. • SAP2000 models can be exported directly as House models to program SASSI. This allows the same model can be used for both SAP2000 and SASSI analyses. • SAP2000 can create animated deflected shapes (*.AVI files) for the time-history results from program SASSI.