Screenless displays seminar report

SCREENLESS DISPLAYS
Dept. of ECE SDMIT, UJIRE Page 1
CHAPTER 1
INTRODUCTION
Screenless display is the present evolving technology in the field of the computer-
enhanced technologies. It is going to be the one of the greatest technological development
in the coming future years.
Several patents are still working on this new emerging technology which can
change the whole spectacular view of the screenless displays. Screen less display
technology has the main aim of displaying (or) transmitting the information without any
help of the screen (or) the projector. Screen less displays have become a new rage of
development for the next GEN-X. Screenless videos describe systems fortransmitting
visual information from a video source without the use of the screen.
Screen less computing systems can be divided mainly into 3 groups:
 Visual image
 Retinal direct
 Synaptic interface

SCREENLESS DISPLAYS
CHAPTER 2
SCREENLESS DISPLAYS
2.1 VISUAL IMAGE
Visual Image screen less display includes any screen less image that the eye can
perceive as shown in figure 1 and 2. The most common example of Visual Image screen
less display is a hologram.
2.1.1 HOLOGRAM
Holograms were used mostly in telecommunications as an alternative to screens.
Holograms could be transmitted directly, or they could be stored in various storage
devices (such as holodiscs) the storage device can be hooked up with a holoprojector in
order for the stored image to be accessed [1]. Debatably, virtual reality goggles (which
consist of two small screens but are nonetheless sufficiently different from traditional
computer screens to be considered screen less) and heads-up display in jet fighters (which
display images on the clear cockpit window) also are included in Visual Image category.
In all of these cases, light is reflected off some intermediate object (hologram, LCD
panel, or cockpit window) before it reaches the retina. In the case of LCD panels the light
is refracted from the back of the panel, but is nonetheless a reflected source[3]. The new
software and hardware will enable the user to, in effect; make design adjustments in the
system to fit his or her particular needs, capabilities, and preferences. They will enable
the system to do such things as adjusting tousers’ behaviors in dealing with interactive
movable type.
Working of hologram
To create a hologram, you need an object (or person) that you want to record; a
laser beam to be shined upon the object and the recording medium; a recording medium
with the proper materials needed to help clarify the image; and a clear environment to
enable the light beams to intersect.

SCREENLESS DISPLAYS
Fig.2.1 Recording a hologram.
A laser beam is split into two identical beams and redirected by the use of mirrors.
One of the split beams, the illumination beam or object beam, is directed at the object.
Some of the light is reflected off the object onto the recording medium.
The second beam, known as the reference beam, is directed onto the recording
medium. This way, it doesn't conflict with any imagery that comes from the object beam,
and coordinates with it to create a more precise image in the hologram location.
The two beams intersect and interfere with each other. The interference pattern is
what is imprinted on the recording medium to recreate a virtual image for our eyes to see.

SCREENLESS DISPLAYS
Fig.2.2 Reconstructing a hologram
The diffraction grating and reflective surfaces inside the hologram recreate the
original object beam. This beam is absolutely identical to the original object beam
before it was combined with the reference wave. This is what happens when you listen to
the radio. Your radio receiver removes the sine wave that carried the amplitude- or
frequency-modulated information. The wave of information returns to its original state,
before it was combined with the sine wave for transmission.
The beam also travels in the same direction as the original object beam, spreading out as
it goes. Since the object was on the other side of the holographic plate, the beam travels
toward you. Your eyes focus this light, and your brain interprets it as a three-dimensional
image located behind the transparent hologram. This may sound far-fetched, but you
encounter this phenomenon every day. Every time you look in a mirror, you see yourself
and the surroundings behind you as though they were on the other side of the mirror's
surface. But the light rays that make this image aren't on the other side of the mirror --
they're the ones that bounce off of the mirror's surface and reach your eyes. Most
holograms also act like color filters, so you see the object as the same color as the laser
used in its creation rather than its natural color.

SCREENLESS DISPLAYS
This virtual image comes from the light that hits the interference fringes and
spreads out on the way to your eyes. However, light that hits the reverse side of each
fringe does the opposite. Instead of moving upward and diverging, it moves downward
and converges. It turns into a focused reproduction of the object -- a real image that you
can see if you put a screen in its path. The real image is pseudoscopic, or flipped back to
front -- it's the opposite of the virtual image that you can see without the aid of a screen.
With the right illumination, holograms can display both images at the same time.
Your brain plays a big role in your perception of both of these images. When your
eyes detect the light from the virtual image, your brain interprets it as a beam of light
reflected from a real object. Your brain uses multiple cues, including, shadows, the
relative positions of different objects, distances and parallax, or differences in angles, to
interpret this scene correctly. It uses these same cues to interpret the pseudoscopic real
image.

SCREENLESS DISPLAYS
2.2 RETINAL DISPLAY
Virtual retinal display systems are a class of screen less displays in which images
are projected directly onto the retina as shown in figure 2.2. They are distinguished from
visual image systems because light is not reflected from some intermediate object onto
the retina; it is instead projected directly onto theretina. Retinal Direct systems, once
marketed, hold out the promise of extreme privacy when computing work is done in
public places because most inquiring relies on viewing the same light as the person who
is legitimately viewing the screen, and retinal direct systems send light only into the
pupils of their intended viewer.
Fig 2.3 Block Diagram of Retinal Display
To create an image with the VRD a photon source (or three sources in the case of
a color display) is used to generate a coherent beam of light. The use of a coherent source
(such as a laser diode) allows the system to draw a diffraction limited spot on the retina.
The light beam is intensity modulated to match the intensity of the image being rendered.
The modulation can be accomplished after the beam is generated. If the source has
enough modulation bandwidth, as in the case of a laser diode, the source can be
modulated directly.
The resulting modulated beam is then scanned to place each image point, or pixel,
at the proper position on the retina. A variety of scan patterns are possible. The scanner
could be used in a calligraphic mode, in which the lines that form the image are drawn
directly, or in a raster mode, much like standard computer monitors or television. Our
development focuses on the raster method of image scanning and allows the VRD to be
driven by standard video sources. To draw the raster, a horizontal scanner moves the

SCREENLESS DISPLAYS
beam to draw a row of pixels. The vertical scanner then moves the beam to the next line
where another row of pixels is drawn.
After scanning, the optical beam must be properly projected into the eye. The goal
is for the exit pupil of the VRD to be coplanar with the entrance pupil of the eye. The lens
and cornea of the eye will then focus the beam on the retina, forming a spot. The position
on the retina where the eye focuses the spot is determined by the angle at which light
enters the eye. This angle is determined by the scanners and is continually varying in a
raster pattern. The brightness of the focused spot is determined by the intensity
modulation of the light beam. The intensity modulated moving spot, focused through the
eye, draws an image on the retina. The eye's persistence allows the image to appear
continuous and stable.
Finally, the drive electronics synchronize the scanners and intensity modulator
with the incoming video signal in such a manner that a stable image is formed.
Fig.2.4 Retinal Display
2.2.1 VRD STRUCTURE
A virtual retinal display (VRD), also known as a retinal scan display (RSD), is a
new display technology that draws a raster display (like a television) directly onto the
retina of the eye. The user sees what appears to be a conventional display floating in
space in front of them. Similar systems have been made by projecting a defocused image
directly in front of the user's eye on a small "screen", normally in the form of large
sunglasses. The user focuses their eyes on the background, where the screen appeared to
be floating. The disadvantage of these systems was the limited area covered bythe
"screen", the high weight of the small televisions used to project the display, and the fact

SCREENLESS DISPLAYS
that the image would appear focused only if the user was focusing at a particular "depth".
Limited brightness made them useful only in indoor settings as well. Only recently, a
number of developments have made a true VRD system in practice. In particular, the
development ofhigh-brightness LEDs have made the displays bright enough to be used
during the day and adaptive optics have allowed systems to dynamically correct for
irregularities in the eye (although this is not at all needed in all situations). The result is a
high-resolution screen less display with excellent color range and brightness, far better
than the best television technologies.
The VRD was invented at the University of Washington in the Human Interface
Technology Lab in 1991. Most of this research into VRDs todate has been in combination
with various virtual reality systems. In this role VRDs have the potential advantage of
being much smaller than existing television-based systems. They share some of the same
disadvantages however, requiring some sort of optics to send the image into the eye,
typically similar to the sunglasses system used with previous technologies. It can be also
used as part of a wearable computersystem. More recently, there has been some interest in
VRDs as a display system for portable devices such as cell phones, PDAs and various
media players. In this role the device would be placed in front of the user, perhaps on a
desk, and aimed in the general direction of the eyes. The system wouldthen detect the eye
using facial scanning techniques and keep the image in place using motion compensation.
In this role the VRD offers uniqueadvantages will interact with technology directly
through our senses, through technology embedded in what he is calling “Internet
Glasses”. Voice was always organized in sessions with a beginning and an end. Today we
have threads, is being able to replicate a full-sized monitor on a small device.
The most recent innovations in mobile computing have been based around touch
screen technology [6]. The future of mobile devices is both touch less and screen less. By
2020 the mobile phone as we know it today will disappear and something very different
will take its place. Instead of touching a screen, we when a thread is started it never
Gends and we have many continuing in parallel. Think of your email, RSS feeds, Twitter,
etc. So this is how our brain works.
The hone of tomorrow will be telecoupling and related machines and future is
bypassing screens and keyboards altogether. The two key technologies will be laser
based displays, which display images directly onto our retinas and brain wave sensing
implants as shown in figure 4.1. This will allow technology to integrate with our ‘reality
vision’ much more seamlessly. We are on the verge of a hardware revolution that will

SCREENLESS DISPLAYS
make this all possible, as well as the cloud-based information streaming that will enable
the user interface to become a reality as shown in figure 5.2.
Fig 4.1: VirtualRetinal Display –Example.
2.3 SYNAPTIC INTERFACE
Synaptic Interface screen less video does not use light at all.Visual information
completely bypasses the eye and is transmitted directly to the brain. While such systems
have yet to be implemented in humans, success has been achieved in sampling usable
video signals from the biological eyes of a living horseshoe crab through their optic
nerves, and in sending video signals from electronic cameras into the creatures' brains
using the same method as illustrated in figure 2.3.
Fig.2.5. Synaptic Interface

SCREENLESS DISPLAYS
CHAPTER3
THE WORKING PRINCIPLE
There are several new emerging ways for the technological development of the
working principle of the screen less displays [4]. Several software’s are merging for the
GEN-X wonder view. Any computer system that can run the Modoc software can present
text that has been set in interactive movable type. Most of the Modoc that are consumed
in the next few years will be consumed with conventional personal computers, e-book
readers, and other kinds of display and projection devices that are now in use. Very soon
it appears to be a new kind of input/output system will facilitate communication and
interaction between the computer and the computer user. This new human/computer
interface is the telereader terminal. Visual Image is a bitmap manipulation and
composition product. Bitmaps can be manipulated independently, in the Image Mode or
multiple bitmaps can becomposited Together in the Object Mode to create a "collage".
Visual Image can create and Manipulate images of any size: theonly limitation is
the amount of memory resources your systemhas.
3.1. Creating Visual Catalog Files
Visual Image gives you the ability to create files in the EYE file format for use in
the Visual Catalog program. These EYE files can be used to create catalogs of images in
logical sub groupings: for example, you can create a catalog file in the EYE format that
lists all images of building materials (brick, concrete, stone, etc.). The File, Export Project
command creates an EYE file that refers to all of the images that are currently loaded into
Visual Image. When you select this command, you are prompted to enter a filename for
the EYE file that is to becreated. If you have created any image in Visual Image that are
not yet saved to disk you will be asked if you wish to include those images in the EYE
file and if so, you are prompted to store those images as bitmaps. The File, Exports Editor
Command in Visual Image allows you to pack and choosethose image files on disk that
you wish to include in a catalog EYE file [5]. When you select File in Export Editor, a
file browser appears from which you can choose the image files to include. Use this
browser to select images to add to a project file for use in Visual Catalog.

SCREENLESS DISPLAYS
3.2. Additional Software and Hardware Requirements
 To facilitate the interactivity
 To optimize the user’s perceptual and cognitive capabilities
 To provide the most healthful visual environment for the user.
 Responding to a variety of user commands (using voice, hand, foot, or other signal
methods)
 Providing blink cues or blinks responses
 Modifying output to compensate for changes in user’sphysiology or reaction time, etc.
The new software and hardware will enable the user and the system to better exploit
each other’s capabilities and to function as a fully integrated team.

SCREENLESS DISPLAYS
CHAPTER 4
APPLICATIONS OF THE SCREENLESS DISPLAY
The main use of the screen less displays are used for the development of the
mobile phones which are mainly used by the old and blind people as shown in figure 5.1.
This type of the invention of the screen less displays was first done on the mobile phone
named OWASYS 2CC. This model is very usefulfor the old, blind, and even for the
people with less vision power.
Fig. 5.1:Application applied to mobile Technology
Screen less displays technology is also implemented for the development of the
screen less laptops. A laptop without an LCD can be a very useful portable solution when
connected to CRT or fixed LCD monitors. Laptops without screens would also be a green
solution, giving value to donated CRT monitors that would otherwise be heading for
landfills. Portability means that volunteers, who don’t always have the time to travel
topeople’s homes, can more easily maintain this computer.
Screenless displays are also widely applicable in the field of the holograms
projection. Hologram projection is a result of a technological innovation that truly helps
in touch less holographic interfaces. In fact, hologram projection projects 3D images of so
high quality that it feels as if one can touch them. However, holographic projection is still
to achieve mass acceptance as until now, conventional holograms, which offer 3D
images.

SCREENLESS DISPLAYS
Latest laser technology are also implementing the special technique of the screen
less display through the presence of the several 3D scope animation or the screen
provides the advantage of being combined with the Laser Valve Video Projector that
helps in projecting video images by the use of the laser light instead of the Xenon Arc
lamps . Laser technologies have given an edge over the other technologies as the LVP
gives the projector an excellent depth in the focus.
Fig.5.2. Virtual screens
Screen less display’s major working principle can also be implemented in the
emerging of the new screen less TV’s. Imagine that watching the TV picture that seems to
be magically appearing in the thin air. The picture just floats on in front of the viewer;
this would be a latest emerging technology in the future .

SCREENLESS DISPLAYS
CHAPTER 5
ADVANTAGES AND DISADVANTAGES OF THE
TECHNOLOGY
ADVANTAGES:
 Low power requirements- Only six diodes are required and a few of a watts to
deliver their images to the user’s eyes [3].
 Higher resolution images- The pixels in the images projected by the diodes can
be made smaller than is possible with any CRT or flat panel display, so higher
resolution can be achieved. With retinal projectors, the only limitation in the
resolution of visual images will be the resolving power of the users’ eyes.
 Greater portability- The combination of diodes, lenses, and processing
components in a retinal projector system will weigh only a few ounces.
 Wider angle of view- Retinal projectors will be able to provide a wider field of
view than is possible with display screens.
 More accurate color- By modulating light sources to vary the intensity of red,
green, and blue light, retinal projectors can provide a wider range of colors – and
more fully saturated colors – than any other display technology.
 Greater brightness and better contrast- Retinal projectors can provide
higher levels of contrast and brightness than any other display system
 Ability to present 3D images- With their capability of presenting high
definition image-pairs, retinal projectors can deliver the most highly realistic
stereoscopic movies and still pictorial images to their users.
 Ability to present far-point images- The human visual system is a far-point
system. With today’s desktop and laptop computers users must employ their near-
point vision. The excessive use of our near-point vision in using computers, reading,
sewing, playing video games, etc., is making myopia avery common impediment. The
use of the far-point images that can be provided by retinal projector systems could
reduce the incidence of myopia and, hence, the growing need for and use of
eyeglasses see figure 10.

SCREENLESS DISPLAYS
 Lower costs- The present cost of retinal projector systems is high. Nevertheless,
there are no hard-to-overcome manufacturing problems in mass-producing and low-
cost components, so inexpensive systems will soon become available. Environmental
and disposal costs of these tiny delivery devices will also be minimal because toxic
elements such as lead, phosphorus, arsenic, cadmium, and mercury are not used in
their manufacture [4].
DISADVANTAGES:
 The principle disadvantage is that Virtual retinal display (VRD) is not yet
available in the significant number.
 Prototypes and special experimental models are now being built, but
their cost per unit is high.
 The VRD technology is still under progress and development.

SCREENLESS DISPLAYS
CHAPTER 6
FUTURE ENHANCEMENTS
For the future development of this emerging new technology, several researches
are being conducted and the several renowned IT sector companies and other best labs
present in the world are handling over the project of screenless displays.
 Microsoft in 2001 began the work on an idea for an Interactive table that mixes both
the physical and the Virtual worlds.
 Multi touch is a human computer interaction technique and the hardwires devices that
implement it, which allows users to compute without conventional input devices.
 CUBIT is being developed for the future use of the multi touch use of the program.
 Development of the enhancement of the micro vision also gives the improved and the
futuristic view of the screen less displays. This technology of the micro vision is the
very well useful in the Artificial Retinal Display properties.
 Japanese scientists have invented the pair of intelligent glasses that remembers where
people last saw their keys, handbags, iPod, and mobile phones.
 Smart Google is developing the compact video camera which films everything the
wearer looks at the information what the viewer wants will be directly being seen in
through the glasses where there is no screen or projector present.
 Several laboratories are working under progress on the electron beam lithography
which includes the advanced enhancement of the futuristic screen less display.
 Adobe systems are also working out for the development and deployment cross
platform of the several applications which are to be viewed without the actual screen.

SCREENLESS DISPLAYS
CONCLUSION
The paper has elaborately discussed screenless displays which is one of the most
emerging computer technologies and has become a new exciting rage for the upcoming
generations as a field of the futuristic technology. Due to the ability of having several
advantages which are involved in the making,designing, coding of the screenless , this
needs plenty of knowledge and process for the development is still under the
improvement. May be in the future the world may be dominated with the screen less
display technologies and this enriches the world of technological empowerment in the
fieldof the computer technology. Screenless displays promise the cost effective aspect and
also brighter future in the computer technology[7].

SCREENLESS DISPLAYS
REFERENCES
[1] Screen-less Head Mounted Projector with RetrotranmissiveOptics Ryugo KIJIMA
[2] Kiyokawa, K., "A Wide Field-of-view Head MountedProjective Display.
[3] Okano, F., Arai, J., "Resolution characteristics of afocal array optics".
[4] SPE Annual Technical Conference and Exhibition, 30 September-3 October 2001.
[5] www.technologyreview.com/blog/mimssbits/25623/
[6] Telecoms.cytalk.com/.../why-the-future-of-mobile-isscreenless-touch.
[7] K Ranganath, M.Sravanthy, P.Krupali/ International Journal of Engineering Research.

SCREENLESS DISPLAYS

Screenless displays seminar report

More Related Content

What's hot (20)

Similar to Screenless displays seminar report (20)

Recently uploaded (20)

Screenless displays seminar report