SDC 413NU Data Sheet
0 likes800 views
This document provides information on exit switches and related products from SDC Security, including specifications, options, and finishes. It describes various switch models for different applications, including illuminated buttons, timers, vandal resistance, touchless sensors, and communicating bathroom systems. Emergency break glass stations are also mentioned.
![SECURITY DOOR CONTROLS
www.sdcsecurity.com service@sdcsecurity.com
[t] 800.413.8783 805.494.0622
801 Avenida Acaso, Camarillo CA 93012 • PO Box 3670, Camarillo CA 93011-3670
sdcsecurity.com service@sdcsecurity.com
© 2014 Security Door Controls LIT-Exit Switches 12/14
For a common single bathroom shared by two patient rooms or
dormitory rooms, the CB400A controls provides privacy and ensures
that both doors are locked only when the bathroom is occupied and
unlocked when the bathroom is not occupied. The CB400B controls
provide emergency access by facility staff. Both doors unlock when
signalled by the fire life safety system.
CB401A The CB401A is located inside the bathroom. Depressing the button
locks both doors for privacy. Pressing the button again unlocks both
doors ensuring both doors are unlocked when unoccupied.
CB401B The CB401B Emergency door release (2 required) is located
outside the bathroom above or adjacent to the door. The
illuminated push switch button indicates the doors are locked.
Depressing the push switch unlocks both doors.
• 2 EMLock’s:
1581VD – 650lbs Holding Force
or 1571VD – 1200lbs Holding Force
• 631RF-UR-1 Power Supply
For communicating bathroom systems with EMLocks
For communicating bathroom systems with Electrified Locksets
CB402A The CB402A is located inside the bathroom. Depressing
the push switch locks both doors on the outside only.
Doors are always unlocked on the inside for uninhibited
egress. Exiting either door causes both doors to unlock.
CB402B The CB402B Emergency door release (2 required) is
located outside the bathroom above or adjacent to the door.
The illuminated push switch button indicates the doors are
locked. Depressing the push switch unlocks both doors.
• 2 each Electrified Locksets:
Z7250 Electrified Cylindrical lock with Rex output
or Z7850-R Electrified Mortise lock with REX output
• PTH-4Q Four Wire Power Transfer Hinge
• 631RF – UR-1 Power Supply
• MC-4 - 2 each optional
Communicating Bathroom System Controls
Additional Components Required
Additional Components Required
Specifications
Contact: SPDT 5 Amp @ 30VDC
Wire Leads: 6'', 20 Gauge
1 Gang: 2 7/8" x 4 1/2" x 20 Ga. (73 x 114 x 0.912 mm)
M:Marketing FilesIn-House PubsDatasheetsExit SwitchesExit Switches.indd
Emergency Break Glass Station
The SDC 491 Emergency Door Release Break
Glass Station provides immediate unlocking of
perimeter doors or interior doors that are equipped
with fail-safe electric locks. The 491’s built in alarm
may be used as a local door annunciator.
The SDC 491 is specifically designed for
emergency door release and may influence
the approval of an electric locking system.
This type of Emergency Door Release may
be preferred over a pull station since greater
commitment is required to break the glass.
491 Break glass emergency door release with siren 3V-28VDC, 18mA
(2 replacement glass pieces included)
491-GL4 Four replacement glass plates
491-BB Blue surface mount back box
Emergency Pull Station
The SDC 492 Emergency Door Release Pull
Station provides immediate unlocking of perimeter
doors or interior doors that are equipped with fail-
safe electric locks. The 492’s built in alarm may be
used as a local door annunciator.
The SDC 492 is specifically designed for
emergency door release and may influence the
approval of an electric locking system.
492 Pull station emergency door release with siren 3V-28VDC, 18mA
492-GL4 Four replacement glass rods
492-BB Blue surface mount back box
7150-0324:0109
APPLICATIONS
Single hospital bathroom
shared by two patient rooms.
SYSTEM OPERATION
Both doors must be closed to lock.
Activating CB401A (B) locks both doors.
Activating CB401A (B) again unlocks both doors.
When doors are locked, activating either CB401B (C) emergency
release will unlock both doors.
Both doors will unlock automatically via signal from fire panel.
SYSTEM COMPONENTS
(A) Fail Safe locks with door position switch. Example: 1511-DPS
(B) CB401A System activation push switch.
(C) CB401B Emergency release push switch to be mounted above
each door. CB701B key switch optional.
(D) 631RFxUR1 Power Supply with Fire Panel Tie-In.
FROM
FIRE
PANEL
110 VAC
INPUT
POWER SUPPLY
Communicating Bathroom](https://image.slidesharecdn.com/413n-150429154443-conversion-gate01/85/SDC-413NU-Data-Sheet-4-320.jpg)
SDC 413NU Data Sheet
- 1. Price & Installation sdcsecurity.com service@sdcsecurity.comSECURITY DOOR CONTROLS Exit Switches The illuminated switch button is two inches square for easy activation and is visually conspicuous. The high impact resistant material stands up to abuse. The “PUSH to EXIT” sign complies with NFPA requirements. The 422A is designed for access and egress applications for the disabled. 1 Gang; 2’’ Button, Green Illuminated Button - Stainless Steel Narrow; 1¾’’x1’’ Button, Green Illuminated Button - Stainless Steel 410 & 420 Series Finishes C 605 Bright Brass D 606 Dull Brass H 613 Oil Rubbed Bronze P 625 Bright Chrome Options Specifications Contact: SPDT/DPDT, 5 Amp @ 30VDC Resistive Timer: DPDT 2 Amp @ 12/24VDC Wire Leads:6”, 20 Gauge 1 Gang: 2 7/8" x 4 1/2" x 20 Ga. (73 x 114 x 0.912 mm) Narrow: 1 3/4" x 4 1/2" x 20 Ga. (45 x 114 x 0.912 mm) L1G 1 Green LED LTTri-color LED - Red, Green, Amber L1R 1 Red LED R Red Button in lieu of green L2 1 Red,1 Green LED 1 Gang Narrow Contact Sign 422U 412NU Momentary SPDT PUSH TO EXIT 423U 413NU Integrated electronic timer, adj. 1-60 sec, 12/24VDC, DPDT 2Amp contact PUSH TO EXIT 423PU 413PNU Integrated pneumatic timer, adj. 1-180 sec. 12/24VDC, SPDT 3Amp contact PUSH TO EXIT non-illuminated 424U 414NU Momentary DPDT PUSH TO EXIT 425U 415NU AA (On/Off) DPDT NONE 2'' Button - Blue Illuminated button only 422AU Momentary SPDT 423AU Integrated electronic timer, adj. 1-60 sec, 12/24VDC, DPDT 2Amp contact Suffix ‘U’ above indicates standard finish stainless steel Input: 12 or 24 VAC/DC @ 26mA max Contact: 2 SPDT Dry, 2 Amp @ 30VDC Operating Temp: -20° F to 120° F (-29° C to 49° C) Dimensions: 1.5” H x 6.25” W x 1.5” D (38.1 H x 148.8 W x 38.1 D mm) Specifications Model Color MD-31DW White PIR Egress Sensor MD-31DB Black PIR Egress Sensor PIR Egress Sensor UL listed 294 Access Control System Units The MD31D PIR request-to-exit sensor unlocks doors automatically when persons approaching door are detected. The MD31D complies with national fire and building code requirements for Access Controlled Egress Doors listed above. Code compliant failsafe mode releases locks when power to PIR sensor is interrupted. Code Compliant Exit Switches L1G 1 Green LED LT Tri-color LED - Red, Green, Amber L1R 1 Red LED R Red Button in lieu of green L2 1 Red,1 Green LED Options Finishes Specifications Contact: Momentary, DPDT 5 Amp @ 30VDC Resistive Wire Leads: 6”, 20 Gauge 1 Gang: 2 7/8" x 4 1/2" x 20 Ga. (73 x 114 x 0.912 mm) Narrow: 1 3/4" x 4 1/2" x 20 Ga. (45 x 114 x 0.912 mm) Suffix ‘U’ above indicates standard finish stainless steel For special finish use suffix below in lieu of “U” C 605 Bright Brass D 606 Dull Brass H 613 Oil Rubbed Bronze P 625 Bright Chrome 1 Gang Narrow Contact Sign 423MU 413MNU Integrated electronic timer, fixed 30 sec timer, 12/24VDC, DPDT 5Amp contact Resistive PUSH TO EXIT Code Compliant Manual Releasing Devices and Sensors 423M and 413MN exit switches used together with the MD31D PIR sensor comply with manual releasing device and sensor device requirements for Access-Controlled Egress Doors per the following codes: • ICC International Building Code 1008.1.3.4 • IFC International Fire Code 1008.1.3.4 • NFPA 101 Life Safety Code 7.2.1.6.2 • California Fire Code 1 Gang: 2’’ Button, Green Illuminated Button - Stainless Steel Narrow: 1¾’’x1’’ Button, Green Illuminated Button - Stainless Steel CSFM Listed
- 2. 430 Series Mushroom Exit Switch Latching Function with Key Reset Options Finishes Specifications The SDC 430 Heavy Duty Industrial Series incorporates a 1 1/2'' round mushroom button with heavy duty contacts. The assembly is capable of withstanding high impact and is ideal for heavy duty high frequency use. 1.5'' Mushroom, Green Button Standard, Dull Stainless Steel 1 Gang Narrow 2 Gang Contact Sign 431CU 431CNU AA (On/Off) NC SPST none 431OU 431ONU AA (On/Off) NO SPST none 432CU 432CNU Momentary NC SPST EXIT 432OU 432ONU Momentary NO SPST EXIT 433U Momentary with Timer Module, Adj. 1-60 seconds 12/24V AC/DC, SPDT 2A contact EXIT 434U 434NU Momentary DPST EXIT 435U 435NU AA (On/Off) DPST none The SDC 432KUR latches when depressed and must be reset with the built-in-key. Applications include alarm, panic alarm and emergency door release where systems are restored by authorized personnel only. 1.5’’ Mushroom, Red Button Standard, Dull Stainless Steel L1G 1 Green LED LT Tri-color LED - Red, Green, Amber L1R 1 Red LED R Red Button in lieu of Green L2 1 Red,1 Green LED Contact: 6 Amp @ 30VDC Wire Connection: Screw Terminals 1 Gang: 2 7/8" x 4 1/2" x 20 Ga. (73 x 114 x 0.912 mm) Narrow: 1 3/4" x 4 1/2" x 20 Ga. (45 x 114 x 0.912 mm) 2 Gang: 4 1/2" x 4 1/2" x 20 Ga. (114 x 114 x 0.912 mm) 1 Gang Narrow Contact Sign 432KUR 432KNUR Latching/ key reset DPST none C 605 Bright Brass D 606 Dull Brass H 613 Oil Rubbed Bronze P 625 Bright Chrome C 605 Bright Brass D 606 Dull Brass H 613 Oil Rubbed Bronze P 625 Bright Chrome Suffix ‘U’ above indicates standard finish stainles steel For special finish use suffix below in lieu of “U” The conspicuous 440 Heavy Duty Industrial series switch assemblies incorporates a 2 5/8'' inch diameter mushroom button and heavy duty weather resistant contacts. The large 2 gang mushroom assembly incudes a heavy duty steel bezel around the button to guard against abuse. When utilized as an Exit or REX switch, the assembly is easy to activate and stands out for persons without prior knowledge of egress operation. In addition to egress applications, the large assembly is ideal as an easy to activate Emergency/Panic Alarm switch. 440 Heavy Duty Series Specifications Options Finishes 2-5/8'' Mushroom, Red Button Standard, Dull Stainless Steel Finish, Specify G For Optional Green button 1 Gang 2 Gang Contact Sign 441U AA (On/Off) DPST none 442U Momentary DPST EXIT 443U Momentary with Timer Module, Adj. 1-60 seconds 12/24V AC/DC, SPDT 2A contact EXIT 444U Momentary 2-DPST EXIT 446U Momentary DPST EXIT Button: Mushroom, 2 5/8'' (67 mm) Contact: 6 Amp @ 30VDC Wire Connections: Screw Terminals 1 Gang: 2 7/8" x 4 1/2" x 20 Ga. (73 x 114 x 0.912 mm) 2 Gang:: 4 1/2" x 4 1/2" x 20 Ga. (114 x 114 x 0.912 mm) L1G1 Green LED LTTri-color LED - Red, Green, Amber L1R 1 Red LED E Add Exit sign ToAAFunction Switch L2 1 Red,1 Green LED G Green button in lieu of Red Suffix ‘U’ above indicates standard finish stainlessteel For special finish use suffix below in lieu of “U” Model Finish Option 432O U L2 446 U L2 Example
- 3. The SDC 450 Series incorporates a 1/4'' thick aluminum faceplate and an all stainless steel button. The assembly will resist the impact of a hammer blow. In addition, security spanner mounting screws are concealed by tamper resistant aluminum plugs to inhibit tampering. Pneumatic Time Delay The 453PTD includes a 1 to 180 second pneumatic timer for delayed re-locking. Where preferred, the 10TD Electronic Mini Timer may be specified for use with the standard 452 model (see page 4). 450 Vandal Resistant Series 460 Vandal Resistant Series Specifications 1/8” Stainless Steel - Security Screws - Plated Finish Not Available 1 Gang Narrow Contact Sign 463U 463NU Integrated 1-30 Sec Timer, SPDT 3A contact PUSH TO EXIT / EXIT Stainless Steel Button - 1/4” Thick Aluminum Plate - Security Screws Plated Finish Not Available 1 Gang Narrow Contact Sign 451V 451NV AA (On/Off) SPDT none 452V 452NV Momentary SPDT none 453PV 453PNV Integrated Pneumatic Timer Adj. 1-180 sec. DPST contact none Button: Round Dull Stainless Steel button, 1/2'' (13 mm) Contact: 6 Amp @ 30VDC Wire Connections: 451/452: 6", 20 gauge 453: Screw terminals 1 Gang: 2 7/8" x 4 1/2" x 1/4" (73 x 114 x 6.35 mm) Narrow: 1 3/4" x 4 1/2" x 1/4" (45 x 114 x 6.35 mm) Specifications Input Voltage: 12/24VDC Current: LED On: Idle-60mA, Active-120mA, LED Off: Idle-10mA, Active-60mA Outputs: SPDT 3 Amp @ 30VDC Relay Life Expectancy: 100,000 cycles @ 3A 30VDC 200,000 cycles @ 1A 30VDC Operating Temp: -40° F to +160° F ( -40° C to +70° C) 1 Gang: 4.5” H x 2.75” W x 1.25” D (114 x 70 x 32 mm) Narrow 4.5” H x 1.75” W x 1.25” D (114 x 44 x 32 mm) • Vandal resistant stainless steel piezoelectric button and faceplate • No moving parts • Billion cycle button technology • Bi-color status indicator, Red and Green • Integrated timer, adj. 1-30 seconds or toggle on/off The SDC 460 series is a heavy duty, vandal resistant exit switch designed for harsh indoor or outdoor environments. The stainless steel piezoelectric technology is also ideal for high traffic applications. The switch assembly design ensures superior performance in virtually any environment. The SDC 474U uses IR Sensor technology, the device is active with the simple wave of a hand. Designed to control electric looks/ strikes, magnetic looks, or automatic door openers. It is ideal for use in sanitary applications, such as cleanrooms, bathrooms, food processing, hospitals and labs, and features a sensing range of up to 4” (10cm). The Switch is mounted on a durable stainless steel plate, with dual LED illuminated sensors indicating the status. The quick connect screwless terminal block ensures easy installation. 474U 2-SPDT Touchless Exit Switch Specifications Input: 25mA (standby); 55mA (Active) @ 12/24VDC Output: 2-SPDT, 3 Amp Dry Contact Activation Time: 1 second or as long as sensor is triggered LED Color: Standby RED; Active Green Range: 4” (10cm) Weight: 3 oz. (85g) Dimensions: 4.5” x 2.75” x 1.375” (114 x 70 x 35mm) The electronic Mini Timer delays relocking of access controlled door to provide persons ample time needed to complete door entry or egress. The Mini Timer is compatible with all SDC momentary key and exit switches equipped with a momentary normally open contact. The module assembly fits inside a two gang key or exit switch assembly or may be installed separately in a narrow frame or remote junction box. Input: 12/24 VDC / VAC @ 50 mA Trigger Input: N.O. Dry Contact: SPDT Dry, 2 Amps @ 30VDC Wire Leads: 6", 20 Gauge Size: 3/4" x 1-1/2" x 2-1/4" (19 x 38 x 57 mm) Specifications Mini Timer Module 10TD Mini Timer Module, Adjustable 1 - 60 seconds
- 4. SECURITY DOOR CONTROLS www.sdcsecurity.com service@sdcsecurity.com [t] 800.413.8783 805.494.0622 801 Avenida Acaso, Camarillo CA 93012 • PO Box 3670, Camarillo CA 93011-3670 sdcsecurity.com service@sdcsecurity.com © 2014 Security Door Controls LIT-Exit Switches 12/14 For a common single bathroom shared by two patient rooms or dormitory rooms, the CB400A controls provides privacy and ensures that both doors are locked only when the bathroom is occupied and unlocked when the bathroom is not occupied. The CB400B controls provide emergency access by facility staff. Both doors unlock when signalled by the fire life safety system. CB401A The CB401A is located inside the bathroom. Depressing the button locks both doors for privacy. Pressing the button again unlocks both doors ensuring both doors are unlocked when unoccupied. CB401B The CB401B Emergency door release (2 required) is located outside the bathroom above or adjacent to the door. The illuminated push switch button indicates the doors are locked. Depressing the push switch unlocks both doors. • 2 EMLock’s: 1581VD – 650lbs Holding Force or 1571VD – 1200lbs Holding Force • 631RF-UR-1 Power Supply For communicating bathroom systems with EMLocks For communicating bathroom systems with Electrified Locksets CB402A The CB402A is located inside the bathroom. Depressing the push switch locks both doors on the outside only. Doors are always unlocked on the inside for uninhibited egress. Exiting either door causes both doors to unlock. CB402B The CB402B Emergency door release (2 required) is located outside the bathroom above or adjacent to the door. The illuminated push switch button indicates the doors are locked. Depressing the push switch unlocks both doors. • 2 each Electrified Locksets: Z7250 Electrified Cylindrical lock with Rex output or Z7850-R Electrified Mortise lock with REX output • PTH-4Q Four Wire Power Transfer Hinge • 631RF – UR-1 Power Supply • MC-4 - 2 each optional Communicating Bathroom System Controls Additional Components Required Additional Components Required Specifications Contact: SPDT 5 Amp @ 30VDC Wire Leads: 6'', 20 Gauge 1 Gang: 2 7/8" x 4 1/2" x 20 Ga. (73 x 114 x 0.912 mm) M:Marketing FilesIn-House PubsDatasheetsExit SwitchesExit Switches.indd Emergency Break Glass Station The SDC 491 Emergency Door Release Break Glass Station provides immediate unlocking of perimeter doors or interior doors that are equipped with fail-safe electric locks. The 491’s built in alarm may be used as a local door annunciator. The SDC 491 is specifically designed for emergency door release and may influence the approval of an electric locking system. This type of Emergency Door Release may be preferred over a pull station since greater commitment is required to break the glass. 491 Break glass emergency door release with siren 3V-28VDC, 18mA (2 replacement glass pieces included) 491-GL4 Four replacement glass plates 491-BB Blue surface mount back box Emergency Pull Station The SDC 492 Emergency Door Release Pull Station provides immediate unlocking of perimeter doors or interior doors that are equipped with fail- safe electric locks. The 492’s built in alarm may be used as a local door annunciator. The SDC 492 is specifically designed for emergency door release and may influence the approval of an electric locking system. 492 Pull station emergency door release with siren 3V-28VDC, 18mA 492-GL4 Four replacement glass rods 492-BB Blue surface mount back box 7150-0324:0109 APPLICATIONS Single hospital bathroom shared by two patient rooms. SYSTEM OPERATION Both doors must be closed to lock. Activating CB401A (B) locks both doors. Activating CB401A (B) again unlocks both doors. When doors are locked, activating either CB401B (C) emergency release will unlock both doors. Both doors will unlock automatically via signal from fire panel. SYSTEM COMPONENTS (A) Fail Safe locks with door position switch. Example: 1511-DPS (B) CB401A System activation push switch. (C) CB401B Emergency release push switch to be mounted above each door. CB701B key switch optional. (D) 631RFxUR1 Power Supply with Fire Panel Tie-In. FROM FIRE PANEL 110 VAC INPUT POWER SUPPLY Communicating Bathroom