Drager Polytron 8310 Fixed Gas Detector - Spec Sheet
0 likes594 views
The Dräger Polytron 8310 gas detector allows remote access and integration into management systems using digital communication like HART and fieldbus systems. It uses a poison-resistant, fail-safe DrägerSensor IR sensor that has a long service life and reduced maintenance compared to other sensors. Additional options include three relays for controlling external equipment and mounting sets for easy installation on walls or pipes.
Drager Polytron 8310 Fixed Gas Detector - Spec Sheet
- 1. SIMPLE INSTRUMENT MANAGEMENT THANKS TO DIGITAL COMMUNICATION With its HART® ability, the Dräger Polytron 8310 allows remote access using the Dräger PolySoft 8000 software for the quick and convenient evaluation of the instrument status. Integration in existing management systems (e.g. PactWare) is also possible using DTM. In addition, fieldbus systems such as Foundation Fieldbus or Profibus are supported by corresponding interfaces. POISON-RESISTANT AND FAIL-SAFE The DrägerSensor IR offers several benefits: technological advantages such as poison resistance and a fail-safe operation as well as a long service life. Another asset is the significantly reduced maintenance expenditure, as compared to pellistors. The DrägerSensor IR offers a high reliability and outstanding performance features, e.g. in terms of response times and long-term stability. Dräger Polytron 8310 Stationary gas detector (DSIR) D-24180-Dräger Polytron 8310 Infrared DrägerSensor IR for the detection of combustible gases and vapours D-15018-2010 Quick, reliable and cost-effective detection of combustible gases and vapours in the ambient air: The Dräger Polytron 8310, which contains a durable, poison-resistant IR sensor, can also be integrated into your digital fieldbus system, thus providing additional diagnostic functions. 24363-2010 Same design, same operating principle: The Polytron 8000 series The Dräger Polytron 8310 is part of the Polytron 8000 series. All transmitters of this series have the same design and user interface, which guarantees a uniform operating philosophy. Your advantage: less training requirement and easier maintenance. Other transmitters of the Polytron 8000 series: – Dräger Polytron 8000 (EC stationary gas detector) – Dräger Polytron 8200 (CatEx stationary gas detector) – Dräger Polytron 8700 (PIR 7000 stationary gas detector) – Dräger Polytron 8720 (PIR 7200 stationary gas detector) Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.heattracing.co.uk www.thorneanderrick.co.uk
- 2. DRÄGER POLYTRON 8310 - STATIONARY GAS DETECTOR (DSIR) 02 | Remote sensor terminals Relay terminals Power terminals Hinge pin Feed-through DRÄGER POLYTRON 8000 WITH E-BOX / DOCKING STATION ATTACHED PROVEN – AND STILL GETTING BETTER: DRÄGER MEASUREMENT TECHNOLOGY Dräger has been developing and manufacturing sensors and gas detectors for industrial use for more than 40 years. And with each new instrument generation, we drive our measurement technology a bit further. With the Polytron 8310, you will definitely benefit from this experience and power of innovation. For the more sophisticated DrägerSensor IR is also traditionally manufactured by Dräger. OPTIONAL: THREE RELAYS FOR CONTROLLING EXTERNAL EQUIPMENT On request, the Dräger Polytron 8310 can be equipped with three integrated relays. This enables you to use it as an independent gas detection system with two arbitrarily adjustable concentration alarms and one fault alarm. Audio alarms, signal lights, or similar devices can, thus, be controlled locally – without an additional cable between the transmitter and a central controller. The sensor signal can be evaluated using the 4 to 20 mA signal. OPTIONAL: TWO MOUNTING SETS FOR EASY FLANGE-MOUNTING The housing has four mounting holes. Two different mounting sets are available for installing the Polytron 8310: a duct-mount and a pipe-mount set. This means that the transmitter can be easily installed anywhere – e.g., on a smooth wall, a pipe or an exhaust duct. QUICK AND EASY WIRING The electronics and the bezel form a single unit. Simply pull them out of the housing. Then insert the three-wire cable into the terminals. Finally, plug the terminal block into the PCB. FURTHER ADVANTAGES: ––Easy and cost-effective: one-man calibration ––Available as flameproof or increased safety version ––Aluminium or 316 L stainless steel housing for the most extreme industrial conditions ––Extremely user-friendly software thanks to a minimum number of menu items ––Backlit display: easy to read, even in the dark and without a flash light ––Traffic light status indicator (green = no danger, yellow = error, flashing red = gas alarm) ––Matrix display allows the flexible setting of measuring ranges and units D-15037-2010
- 3. DRÄGER POLYTRON 8310 - STATIONARY GAS DETECTOR (DSIR) | 03 TECHNICAL DATA DRÄGER POLYTRON 8310 Type Flameproof ‘d’ or combined increased safety ‘d/e’ transmitter Gases Combustible gases and vapours Measuring ranges DSIR: 0 to 100% LEL Display Backlit graphic LCD; 3 status LEDs (green/yellow/red) Electrical data Analog signal output Normal operation 4 to 20 mA Maintenance Steady 3.4 mA or 4 mA ± 1 mA 1 Hz modulation; user selectable Fault < 1.2 mA Digital signal output HART® Supply voltage 10 to 30 VDC, 3-wire Relay rating 2 alarm, 1 fault relay, SPDT (option) 5 A @ 230 VAC, 5 A @ 30 VDC, resistive load Ambient conditions Temperature - 40 to + 149 °F / - 40 to + 65 °C (see also sensor data sheet) Pressure 20.7 to 38.4 inch Hg / 700 to 1300 mbar Humidity 0 to 100% RH, non-condensing Enclosure Transmitter housing Epoxy-coated copper free aluminium or 316L stainless steel Enclosure rating NEMA 4X & 7, IP 65/66/67 Cable entry ¾” NPT female conduit or M20 cable gland Size (l x w x d, approx.) without e-Box 11.6” x 5.8” x 5.1” / 295 x 150 x 130 mm with e-Box 11.9” x 7.1” x 7.4” / 300 x 180 x 190 mm Weight (approx.) without e-Box, 4.9 lbs / 2.2 kg aluminium without e-Boxx, 316 8.8 lbs / 4.0 kg stainless steel with e-Box 7.7 lbs / 3.5 kg aluminium with e-Box, 316 11.9 lbs / 5.4 kg stainless steel Approvals *) UL Class I, Div 1, Groups A, B, C, D; Class II, Div 1, Groups E, F, G Class I, Zone 1, Group IIC; T-Code T6 / T4 CSA **) Class I, Div 1, Groups A, B, C, D Class I, Zone 1, Group IIC; T-Code T6 / T4 IECEx Ex d IIC T6/T4 Gb, -40 ≤ Ta ≤ +40/+65 °C; ‘d’ version Ex de IIC T6/T4 Gb, -40 ≤ Ta ≤ +40/+65 °C; ‘e’ version; Ex tb IIIC T80/130 °C Db ATEX II 2G Ex d IIC T6/T4 Gb, -40 ≤ Ta ≤ +40/+65 °C; ‘d’ version II 2G Ex de IIC T6/T4 Gb, -40 ≤ Ta ≤ +40/+65 °C; ‘e’ version; II 2D Ex tb IIIC T80/130 °C Db CE markings ATEX (Directive 94/9/EC) Electromagnetic Compatibility (Directive 2004/108/EC) Low Voltage (Directive 2006/95/EC) *) All e-Box versions are only ATEX / IECEx approved. **) Pending
- 4. DRÄGER POLYTRON 8310 - STATIONARY GAS DETECTOR (DSIR) 04 | ORDER INFORMATION Dräger Polytron 8310 Aluminium ‘d’ SS316L ‘d’ Aluminium ‘e’ SS316L ‘e’ Without relays 45 44 807 45 44 816 45 44 825**) 45 44 834**) With relays 45 44 808 45 44 817 45 44 826***) 45 44 835***) Remote version w/o relays 45 44 843*) 45 44 852*) Remote version w/ relays 45 44 844*) 45 44 853*) *) Order Sensing Head DSIR Remote ‘e’ Version and e-Box 68 12 275 separately. **) Order e-Box 68 12 420 for power only wires separately. ***) Order e-Box 68 12 275 for power and/or relay wires separately. Magnetic wand for menu access (blue body, white logo) 45 44 101 e-Box Power only version (includes 1 cable gland) / Docking Station 68 12 420 e-Box Power, Relay and/or Remote version 68 12 275 (includes 2 cable glands) / Docking Station Cable Gland e-Box 68 12 868 Pipe Mount Kit 45 44 198 Duct Mount Kit 68 12 725 Junction Box Aluminium for Remote Mount ‘d’ 45 44 099 Junction Box Stainless Steel for Remote Mount ‘d’ 45 44 098 Remote ‘e’ Versions Sensing Head DSIR complete Set e for remote ‘e’ versions 68 11 165 Sensing Head DSIR complete Set e2 for remote ‘e’ versions 68 11 265 Accessories Process Adapter 68 11 330 Protection Labyrinth 68 11 135 90 41 535 | 07.12-1 | Marketing Communications | PP | PR | LE | Printed in Germany | Chlorine-free – environmentally compatible | Subject to modifications | © 2012 Drägerwerk AG & Co. KGaA Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.heattracing.co.uk www.thorneanderrick.co.uk