Secondary storage devices
Download as PPT, PDF1 like8,057 views
The document summarizes secondary storage devices, including magnetic disks and optical disks. Magnetic disks store data on circular platters that rotate rapidly. Data is written to and read from the disks using read/write heads. Disks are organized into tracks, sectors, cylinders, and clusters. Accessing data involves seek time, rotational latency, and transfer time. Optical disks like CD-ROMs encode data as pits and lands that are read using a laser. CD-ROMs organize data into sectors along a spiral track to take advantage of all storage space.
Secondary storage devices
- 1. Secondary Storage Devices V.SARANYA AP/CSE Sri Vidya College of Engineering and Technology 1
- 2. 2
- 3. Magnetic disk in floppy disk 3
- 4. Secondary Storage Devices Two major types of storage devices: 1. Direct Access Storage Devices (DASDs) – Magnetic Disks Hard disks (high capacity, low cost per bit) Floppy disks (low capacity, slow, cheap) – Optical Disks CD-ROM = (Compact disc, read-only memory) 2. Serial Devices – Magnetic tapes (very fast sequential access) 4
- 5. Magnetic Disks • Bits of data (0’s and 1’s) are stored on circular magnetic platters called disks. • A disk rotates rapidly (& never stops). • A disk head reads and writes bits of data as they pass under the head. • Often, several platters are organized into a disk pack (or disk drive). 5
- 6. Bits of Data 6
- 7. A Disk Drive surfaces Spindle Boom Read/Write heads Disk drive with 4 platters and 8 surfaces 7
- 8. 8
- 10. Organization of Disks • Disk contains concentric tracks. • Tracks are divided into sectors • A sector is the smallest addressable unit in a disk. 10
- 11. Accessing Data • When a program reads a byte from the disk, the operating system locates the surface, track and sector containing that byte, and reads the entire sector into a special area in main memory called buffer. • The bottleneck of a disk access is moving the read/write arm. So it makes sense to store a file in tracks that are below/above each other in different surfaces, rather than in several tracks in the same surface. 11
- 12. Cylinders • A cylinder is the set of tracks at a given radius of a disk pack. – i.e. a cylinder is the set of tracks that can be accessed without moving the disk arm. • All the information on a cylinder can be accessed without moving the read/write arm. 12
- 13. Cylinders
- 14. Estimating Capacities • Track capacity = # of sectors/track * bytes/sector • Cylinder capacity = # of tracks/cylinder * track capacity • Drive capacity = # of cylinders * cylinder capacity • Number of cylinders = # of tracks in a surface 14
- 15. Exercise • Store a file of 20000 records on a disk with the following characteristics: # of bytes per sector = 512 # of sectors per track = 40 # of tracks per cylinder = 12 # of cylinders = 1331 Q1. How many cylinders does the file require if each data record requires 256 bytes? Q2. What is the total capacity of the disk? 15
- 16. Clusters • Another view of sector organization is the one maintained by the O.S.’s file manager. • It views the file as a series of clusters of sectors. • File manager uses a file allocation table (FAT) to map logical sectors of the file to the physical clusters. 16
- 17. Extents • If there is a lot of room on a disk, it may be possible to make a file consist entirely of contiguous(near by)clusters. Then we say that the file is one extent. (very good for sequential processing) • If there isn’t enough contiguous space available to contain an entire file, the file is divided into two or more noncontiguous parts. Each part is an extent. 17
- 18. Fragmentation Internal fragmentation: loss of space within a sector or a cluster. 1) Due to records not fitting exactly in a sector: e.g. Sector size is 512 and record size is 300 bytes. Either – store one record per sector, or – allow records span(duration) sectors. 2) Due to the use of clusters: If the file size is not a multiple of the cluster size, then the last cluster will be partially used. 18
- 19. Choice of cluster size Some operating systems allow system administrator to choose cluster size. • When to use large cluster size? • What about small cluster size? 19
- 20. Organizing Tracks by Block • Disk tracks may be divided into user-defined blocks rather than into sectors. • Blocks can be fixed or variable length. • A block is usually organized to hold an integral number of logical records. • Blocking Factor = number of records stored in a block. • No internal fragmentation, no record spanning two blocks. • In block-addressing scheme each block of data is accompanied by one or more sub blocks containing extra information about the block. 20
- 21. Non-data Overhead • Both blocks and sectors require non-data overhead (written during formatting) • On sector addressable disks this information involves sector address, track address, and condition (usable/defective). Also pre- formatting involves placing gaps and synchronization marks. • On block-organized disk, more information is needed and the programmer should be aware of some of this information. 21
- 22. Exercise • Consider a block-addressable disk with the following characteristics: – Size of track 20,000 bytes. – Nondata overhead per block = 300 bytes. – Record size = 100 byte. • Q) How many records can be stored per track if blocking factor is a) 10 b) 60 22
- 23. The Cost of a Disk Access The time to access a sector in a track on a surface is divided into 3 components: Time Component Action Seek Time Time to move the read/write arm to the correct cylinder Rotational delay (or Time it takes for the disk to rotate so latency) that the desired sector is under the read/write head Transfer time Once the read/write head is positioned over the data, this is the time it takes for transferring data 23
- 24. Seek time • Seek time is the time required to move the arm to the correct cylinder. • Largest in cost. Typically: – 5 ms (miliseconds) to move from one track to the next (track-to-track) – 50 ms maximum (from inside track to outside track) – 30 ms average (from one random track to another random track) 24
- 25. Average Seek Time (s) • Since it is usually impossible to know exactly how many tracks will be traversed in every seek, we usually try to determine the average seek time (s) required for a particular file operation. • If the starting and ending positions for each access are random, it turns out that the average seek traverses one third of the total number of cylinders. • Manufacturer’s specifications for disk drives often list this figure as the average seek time for the drives. • Most hard disks today have s of less than 10 ms, and high-performance disks have s as low as 7.5 ms. 25
- 26. Latency (rotational delay) • Latency is the time needed for the disk to rotate so the sector we want is under the read/write head. • Hard disks usually rotate at about 5000rpm, which is one revolution per 12 msec. • Note: – Min latency = 0 – Max latency = Time for one disk revolution – Average latency (r) = (min + max) / 2 = max / 2 = time for ½ disk revolution • Typically 6 – 8 ms average 26
- 27. Transfer Time • Transfer time is the time for the read/write head to pass over a block. • The transfer time is given by the formula: number of bytes transferred Transfer time = --------------------------------- x rotation time number of bytes on a track • e.g. if there are 63 sectors per track, the time to transfer one sector would be 1/63 of a revolution. 27
- 28. Exercise Given the following disk: – 20 surfaces 800 tracks/surface 25 sectors/track 512 bytes/sector – 3600 rpm (revolutions per minute) – 7 ms track-to-track seek time 28 ms avg. seek time 50 ms max seek time. Find: a) Average latency b) Disk capacity c) Time to read the entire disk, one cylinder at a time 28
- 29. Sequential Reading • Given the following disk: – s = 16 ms – r = 8.3 ms – Block transfer time = 8.4 ms a) Calculate the time to read 10 sequential blocks b) Calculate the time to read 100 sequential blocks 29
- 30. Random Reading Given the same disk, a) Calculate the time to read 10 blocks randomly b) Calculate the time to read 100 blocks randomly 30
- 31. Fast Sequential Reading • We assume that blocks are arranged so that there is no rotational delay in transferring from one track to another within the same cylinder. This is possible if consecutive track beginnings are staggered (like running races on circular race tracks) • We also assume that the consecutive blocks are arranged so that when the next block is on an adjacent cylinder, there is no rotational delay after the arm is moved to new cylinder • Fast sequential reading: no rotational delay after finding the first block. 31
- 32. Consequently … Reading b blocks: i. Sequentially: s + r + b * btt insignificant for large files ⇒ b * btt ii. Randomly: b * (s + r + btt) 32
- 33. Exercise • Specifications of a 300MB disk drive: – Min seek time = 6ms. – Average seek time = 18ms – Rotational delay = 8.3ms – transfer rate = 16.7 ms/track or 1229 bytes/ms – Bytes per sector = 512 – Sectors per track = 40 – Tracks per cylinder = 12 – Tracks per surface = 1331 – Interleave factor = 1 – Cluster size= 8 sectors – Smallest extent size = 5 clusters Q) How long will it take to read a 2048Kb file that is divided into 8000 256 byte records? i) Access the file sequentially ii) Access the file randomly 33
- 34. Secondary Storage Devices: CD-ROM 34
- 35. Physical Organization of CD-ROM • Compact Disk – read only memory (write once) • Data is encoded and read optically with a laser • Can store around 600MB data • Digital data is represented as a series of Pits and Lands: – Pit = a little depression, forming a lower level in the track – Land = the flat part between pits, or the upper levels in the track 35
- 36. Organization of data • Reading a CD is done by shining a laser at the disc and detecting changing reflections patterns. – 1 = change in height (land to pit or pit to land) – 0 = a “fixed” amount of time between 1’s LAND PIT LAND PIT LAND ...------+ +-------------+ +---... |_____| |_______| ..0 0 0 0 1 0 0 1 0 0 0 0 0 0 1 0 0 0 1 0 0 .. • Note : we cannot have two 1’s in a row! => uses Eight to Fourteen Modulation (EFM) encoding table. 36
- 37. Properties • Note that: Since 0's are represented by the length of time between transitions, we must travel at constant linear velocity (CLV)on the tracks. • Sectors are organized along a spiral • Sectors have same linear length • Advantage: takes advantage of all storage space available. • Disadvantage: has to change rotational speed when seeking (slower towards the outside) 37
- 38. Addressing • 1 second of play time is divided up into 75 sectors. • Each sector holds 2KB • 60 min CD: 60min * 60 sec/min * 75 sectors/sec = 270,000 sectors = 540,000 KB ~ 540 MB • A sector is addressed by: Minute:Second:Sector e.g. 16:22:34 38