Selview installation guide
Download as DOC, PDF1 like128 views
To install Selview 6.0, run the appropriate MDAC file for your OS, then run the Selview.msi installer. The installation wizard will guide you through selecting an installation location and confirming installation. After installation, enter the key number provided by the developer in the registration window to proceed to the login page, where you can log in as the administrator using username SELADMIN and password 'S' or as a regular user with username SELUSER and password 'U'.
Selview installation guide
- 1. How to install SELVIEW 1. In Selview 6.0 setip folder, Open MDAC folder and run the appropriate file as per system operating system (Win98 or WinXP). 1. Open the folder 'Final Selview ver 6.0' and double click on the installer file Selview.msi 2. The installation wizard will be displayed and will guide you through the installation. 1. Select a location for installation
- 2. 2. Confirm the installation
- 3. 3. After installation click on the shortcut key from the start menu to access the software. Register Selview window will be displayed. A key number must be entered against the mentioned security number to proceed. Please contact us for the key number. NOTE : The key number will be prompted for every time the software is installed for the first time on a system. 4. Once the correct key number is entered, it will proceed to the login page.
- 4. a. Select the user name as SELADMIN to enter the Administrator level. The password is 'S' in this case. b. Select the user name as SELUSER to enter the User level. The password is 'U' in this case. For operation guidelines after logging in, please refer to the communication manual.