![Automatic Indication For
Side Stand Operation
MOTHER THERESA INSTITUTE OF ENGINEERING
AND TECHNOLOGY
Melumoi Post, Palamaner -517408.
Chittoor [Dist]. A.P.
Under the esteemed supervision of
Mr. V Sathish Kumar, M. Tech.,
Assistant Professor, Mech Department
Presented by,
Prasanth reddy C
Lokesh kumar B
Giri Prasadh G
Sreenivasulu G
Jeevan M](https://image.slidesharecdn.com/sidestandindication-170125121232/85/Side-stand-indication-1-320.jpg)
Side stand indication
- 1. Automatic Indication For Side Stand Operation MOTHER THERESA INSTITUTE OF ENGINEERING AND TECHNOLOGY Melumoi Post, Palamaner -517408. Chittoor [Dist]. A.P. Under the esteemed supervision of Mr. V Sathish Kumar, M. Tech., Assistant Professor, Mech Department Presented by, Prasanth reddy C Lokesh kumar B Giri Prasadh G Sreenivasulu G Jeevan M
- 2. CONTENTS 1. Introduction 2. components and working of parts 3.construction and working 4.Advantages 5.Limitations 6.Conclusion 2
- 3. Introduction By introducing this technique in motorcycles we can reduce accidents that happen daily which are caused due to not closing of side stand at less cost without using any sensors and expensive materials we can increase the safety of the rider in a smarter way. An automatic indication of side stand lifting mechanism by using mechanical energy is a new technique evolved by our group members to avoid the accidental mistakes causing due to not or improper closing of side stand. 3
- 4. Components (a) Clutch wire (b) two- way switch (c) hand-lever (d) Side stand (e) Battery (f) buzzer Clutch wire Two way switch
- 5. Working of parts 5 hand lever Side stand Connecting wire battery buzzer
- 6. construction The whole construction of this system is simple and efficient. The arrangement and position of components makes the system to function. Each and every component has its own property and responsibility. Then the power consumption does not occurs after retrieving the stand. Construction of this project we increasing the length of the wire which is connected in between the hand lever and above the engine to the spring and connected to the side stand where we provided with a U shaped weld on the side stand it is connected, so it helps to lock the hand lever when the side stand is not closed. It indicates to the rider to lift the side stand this process is “automatic side stand system”
- 7. Working . Stand stand in ON position Pulls & holds the clutch wire Locking of clutch Two way switch activates Side stand is closed by the rider Clutch wire is normal for operation Two way switch deactivatesBuzzer activated Buzzer deactivated
- 8. ADVANTAGES 1. Customer safety 2. Required low maintains 3. Equipment is not costly 4. It can be adopt to any type of motorcycle 5. It doesn’t need of any external energy 6. Longevity 7. Excellent functioning 8. easy to install 14
- 9. LIMITATIONS It may decrease the efficiency of the battery little bit Operation of clutch may be slightly difficult 9
- 10. CONCLUSION We conclude that by adopting this technique in motorcycles we can easily avoid the accidents happen due to not closing of side stand while riding a motorcycle by using simple and low cost equipment we can get an very efficient and strong mechanism which will indicate the position of the side stand. so that we can take care of it and our self 10
- 11. THANK YOU………