Smart Battery Isolator 12V 100A Technical Specification
0 likes1,125 views
The Smart Battery Isolator is designed for dual battery systems to protect the primary starting battery from excessive load while allowing auxiliary batteries to charge. It senses input voltage and automatically connects or disconnects loads at preset voltages of 13.4V and 12.8V to prevent discharging the starting battery. With a surge current rating of 200A and continuous rating of 100A, it is well-suited for dual battery setups in vehicles.
Smart Battery Isolator 12V 100A Technical Specification
- 1. BATTEK Battery Management System Website: http://www.batteksystem.com Ebay: http://www.ebay.com/usr/rimskych + ALTERNATOR OUTPUT Smart Battery Isolator Smart Battery Isolator The Smart Battery Isolator is designed for use in Dual Battery applications as a solenoid priority system to protect the chassis charging system from excessive loading while allowing auxiliary batteries to be charged. The Smart Battery Isolator sense the input voltage generated and auto- matically connect/disconnect the appliance or circuit at pre-set voltages, eliminating the possibility of discharging the primary starting battery. Sole- noid Based Smart Battery Isolator is much better in handling large surge current application (example like motor, wrench etc) than traditional relay based VSR. This unit allow a intermittent current of 200A and continuous current of 100A. Smart Battery Isolator is ideal for dual battery set-ups as they enable two batteries to be charged at the same time and then isolates the batteries from each other when the vehicle is turned off, ensuring your starting bat- tery is always charged & ready to go. Features: - Designed for dual battery systems - Suitable for most 12V charging systems - Surge Protection - Easy to install - Automatically sensing voltage level of main battery - Cut In Voltage: 13.4V - Cut Out Voltage: 12.8V - Turn On Delay: 5 sec (max.) - CE Certified Typical installation: