BATTEK Voltage Sensitive Relay Module Datasheet
1 like1,191 views
The document provides specifications and features of the Battek Voltage Sensitive Relay (VSR) module designed for dual battery systems in vehicles. It includes technical details such as voltage cut-in and cut-out levels, continuous current capacity, and the ability to charge and isolate batteries. The VSR units are suitable for most 12V charging systems and are CE certified for safety.
BATTEK Voltage Sensitive Relay Module Datasheet
- 1. Main Battery (M6 Stud) + BATTERY 1 VEHICLE + BATTERY 2 AUXILIARY + ALTERNATOR OUTPUT To vehical ignition system headlights, horn, etc. To auxiliary equipment stereo, lights, winch, etc. Auxiliary Battery (M6 Stud) Ground FUSE Optional Switch for Emergency Start (Not included) FUSE VOLTAGE SENSITIVE RELAY MODULE BATTEK Features: - Designed for dual battery systems - Suitable for most 12V charging systems - Surge protection - Easy to install - Automatically sensing voltage level of main battery - Continuous Current: 140A - Cut In Voltage: 13.3V - Cut Out Voltage: 12.8V - Turn ON / OFF delay 5s - CE Certified VSR units are ideal for dual battery set-ups as they enable two batteries to be charged at the same time and then isolates the batteries from each other when the vehicle is turned off, ensuring your starting battery is always charged & ready to go. Single Sense: VSR units can only turn ON / OFF according to the Main Battery Voltage. VSR units turn ON (close circuit) when Main Battery Voltage is greater than 13.3V. Dual Sense: VSR units can turn ON / OFF according to both Main Battery and Auxiliary Battery Voltages. VSR units turn ON (close circuit) when EITHER Main Battery Voltage OR Auxiliary Battery Voltage is greater than 13.3V. Typical installation: 68mm / 2.68” 55mm/2.15” 68mm/2.68” 55mm / 2.15” 49mm/1.93” 10mm / 0.39” BATTEK VOLTAGE SENSITIVE RELAY MODULE www.batteksystem.com SINGLE CUT IN: 13.3V DC CUT OUT: 12.8V DC IGNITION PROTECTED 140 AMP ENGINEERING FOR EXCELLENCY DUAL SENSE http://www.batteksystem.com BATTEKENGINEERING FOR EXCELLENCY VOLTAGE SENSITIVE RELAY MODULE