SOLAR ENERGY Module 2 (introduction, thermal and pv)

Solar Radiation
• The sun is the largest member of our solar system. It is a sphere of extremely hot
gaseous matter with a diameter of 1.39 x 109 m and it maintains a distance of
1.495 x 1011 m from the earth as shown in Figure. Sun's high temperature is
maintained by enormous nuclear.
• Energy being released by the continuous fusion reaction. The most important of
them is a reaction in which four hydrogen atoms (proton) combine to form one
helium atom. The mass of the helium nucleus is less than that of four protons, the
difference of mass having been converted to energy in a fusion reactions as follows
4(1H1) 🡪 2He4 + 26.7 MeV
• The surface of the sun is maintained at a temperature of approximately 58000 K.
• The sun as other hot bodies radiates heat energy uniformly in all directions. The
radiated heat energy moves out as electromagnetic waves.
• The radiated heat energy increases the temperature of a body on its interception
and absorption.
• This radiated heat energy from the sun is called solar energy and it provides the
energy needed to sustain life in our solar system.

Solar Radiation
• The earth is shaped as an oblate spheroid – a sphere flattened at the poles and
bulged in the plane normal to the poles. However, for most practical purposes, the
earth may be considered as a sphere with a diameter of about 1.39 × 109 m.
• The earth makes one rotation about its axis every 24 hours and completes a
revolution about the sun in a period of approximately 365.25 days.
• Its axis is inclined at an angle of 23.5°. As a result the length of days and nights keep
changing.
• The earth reflects about 30 per cent of the sunlight that fall on it. This is known as
earth’s albedo.
• The geometry of earth–sun relationship is shown in Fig. The eccentricity of earth’s
orbit is such that the distance between the sun and the earth varies by ±1.7 per
cent. The sun subtends an angle of 32¢ on earth at an average sun–earth distance
of 1.495 × 1011 m, a distance of one astronomical unit.

Solar Radiation
• Sun can be considered for all practical purposes as a black body having high surface
temperature of 6000 K.
• The radiation spectrum consists of emission at various wavelengths but more at
shorter wavelengths as shown in Figure 1 The maximum emissive power of the
radiation takes place at wavelength of 0.48 mm. Similarly the earth can also be
considered a black body at temperature of 288°C. The radiation spectrum from the
earth consists of emission generally of longer wavelengths as shown in Figure 2 The
maximum emission is taking place at wavelength of about 10 mm
Fig 1
Fig 2
Radiation spectrum from sun and earth. (1) Radiation spectrum from
the sun. (2) Radiation spectrum from the earth

Solar Radiation
• At the inner most region, the core, the temperature is estimated between 8×106 to 40×106 degree K.
• The core has a density of about 100 times than that of water and a pressure of 106 atm. (Fusion
reaction) Such a high temp is maintained because of fusion reaction

Solar Radiation
• Irradiance :
• It is the rate at which radiant energy is incidenting on a unit surface area. It
is the measure of power density of sunlight falling per unit area and time. It
is measured in watt per square metre. Heat energy is measured in joules
and while watt or joules per second is unit of power.
• Irradiation :
• It is solar energy per unit surface area which is striking a body over a
specified time. Hence it is integration of solar illumination or irradiance over
a specified time (usually an hour or kilowatt a day). It is measured in
kilowatt-hour or kilowatt day per square metre. For example, if irradiance is
20 kW/m2 for 5 h, irradiation is 20 x 5 = 100 kWh/m2.
• The earth revolves around the sun in an elliptical orbit as shown in Figure.
The earth is closest to the sun on 21 March and 23 September. The earth is
farthest from the sun on 21 June and 22 December. The mean distance of
the earth from the sun is 1.495 x 1011 m

Solar Radiation
• The earth revolves around the sun in an elliptical orbit as shown in Figure .
The earth is closest to the sun on 21 March and 23 September.
• The earth is farthest from the sun on 21 June and 22 December. The mean
distance of the earth from the sun is 1.495 x 1011 m.
• The intensity of solar radiation outside the earth's atmosphere reduces with
distance and it is dependent on the distance between the earth and the sun.
• The intensity of solar radiation reaching outside the earth's atmospheric
varies with the square of the distance between the centres of the earth and
the sun.
• This is the reason why earth receives 7% more radiation on 21 March and 23
September as compared to 21 June and 22 December.
• The intensity of solar radiation keeps on attenuating as earth propagates
away from the surface of the sun, but the content of wavelengths in the
radiation spectrum does not change

Solar Radiation
The earth axis is tilted about 23.45° with respect to earth's orbit around the sun as shown in Figure.
Owing to this tilting of earth's axis, the northern hemisphere of the earth points towards the sun in the
month of June and it points away from the sun in the month of December.
However, earth's axis remains perpendicular to the imaginary line drawn from the earth to the sun
during the months of September and March
The sun-earth's distance varies during earth's rotation around the sun, thereby varying the solar energy
reaching its surface during revolution, which brings about seasonal changes.

Solar Radiation
• The northern hemisphere has summer when the earth is tilting forwards the
sun and winter when the earth is tilting away from the sun.
• In the months of September and March, both the hemispheres are at the
same distance from the sun and receive equal sunshine. During the summer,
the sun is higher in the sky, while the sun is lower in the sky during winter
for the northern hemisphere.

Solar Constant (Isc)
•
where Iext is the extraterrestrial radiation, Isc is the solar constant (1367 W/m2),
where n is the number of days from 1st January.

Solar Radiation
Extraterrestrial radiation
Solar radiation incident on the outer atmosphere of the earth is called extraterrestrial radiation. The
extraterrestrial radiation varies based on the change in sun-earth's distance arising from earth's elliptical
orbit of rotation. The extraterrestrial radiation is not affected by changes in atmospheric condition.

Solar Radiation
• Terrestrial radiation
• When radiation passes through earth's atmosphere, it is subjected to the
mechanism of atmospheric absorption and scattering depending on
atmospheric conditions.
• Earth's atmosphere contains various constituents, suspended dust and solid and
liquid particles, such as air molecules, oxgen, nitrogen, carbon dioxide, carbon
monoxide, ozone, water vapour and dust. Therefore,
• solar radiation or intensity of radiation is depleted during its passage through
the atmosphere.
• The solar radiation that reaches earth's surface after passing through earth's
atmosphere is called terrestrial radiation. The propagation of solar radiation
through earth's atmosphere is shown in Figure

Solar Radiation
• From extraterrestrial region, the solar radiation reaches earth's surface in two
ways:
(i) a part of sun's radiation travels through earth's atmosphere and its reaches
directly, which is called direct or beam radiation, and
(ii) the remaining major part of the solar radiation is scattered, reflected back
into the space or absorbed by earth's atmosphere.
• A part of this radiation may reach earth's surface. This radiation reaching earth's
surface by the mechanism of scattering and reflecting, that is, reradiation, is
called diffuse or sky radiation. The diffuse radiation takes place uniformly in all
directions and its intensity does not change with the orientation of the surface.
• Direct or beam radiation depends on the orientation of the surface.
• The beam radiation depends on the angle of incident on the surface and its
intensity is maximum when the solar radiation is falling normal to the surface.
The solar radiation propagating normal to its direction.

Solar Radiation
• Beam radiation
• Solar radiation along the line joining the receiving point and the sun is called beam
radiation. This is radiation has any unique direction.
• Diffuse radiation
• It is the solar radiation which is scattered by the particles in earth's atmosphere and
this radiation does not have any unique direction.
• Total or global radiation
• Total or global radiation at any location on earth's surface is the sum of beam radiation
and diffuse radiation.
• Air mass (m)
• The radiation reaching earth's surface depends on (i) atmospheric conditions and
depletion and (ii) solar attitude. Air mass is the ratio of the path length through the
atmosphere which the solar beam actually traverses up to earth's surface to the
vertical path length through the atmosphere (minimum height of terrestrial
atmosphere).
• At sea level, the air mass is unity when the sun is vertically is in the sky (inclination
angle 90°).

Solar Radiation
• LATITUDE AND LONGITUDE
• Any location on the earth can be described by two numbers-latitude and
longitude.
• Latitude
• On a globe of the earth, lines of latitude are circles of different sizes.
• The largest one is the circle at equator (circle at equator with centre at
earth's centre) whose latitude is taken as zero.
• The circles at the poles have latitude of 90° north and 90° south (or -90°)
where these circles shrink to a point. To specify the latitude of some
point "P" on the earth's surface, draw the radius OP to the point P from
centre O.
• The elevation angle (l) of the point P above the equator is called latitude l
as shown in the Figure (a). There are 180 circles, of which 90 in each
hemisphere specify the latitude of various points on earth's surface as
shown in Figure (b). Each degree of latitude is about 111 km apart.
Latitude lines run horizontally and these are parallel.

Solar Radiation
On the globe, vertical lines of constant longitude (meridians) extend from pole
to pole similar to the segment boundaries on peeled orange.
Every meridian has to cross the equator and equator is a circle. Like any circle,
it has 360 degrees or divisions. Hence, longitude of a point is the marked value
of that division where its meridian meets the equator circle.

Solar Radiation
• Longitude
• The meridian passing through the Royal Astronomical Observatory at Greenwich,
UK had been chosen as zero longitude. The meridian passing through this
location is called prime meridian. The prime meridian or longitude is considered
zero longitude and there are 180 longitude lines or degrees at cast (+180°) and
180 degrees at west (-180°) of Greenwich.
• The longitude lines meet at poles and these have wide separation at the equator
(about 111 km). The longitudinal lines are shown in Figure Solar noon is the time
when the sun is at the longitude of the place.
• Latitude or angle of latitude (λ)

Solar Radiation
• The latitude of a location on earth's surface is the angle made by the
radial line joining the specified location to the centre of earth with
the projection of this line on the equatorial plane as shown in Figure
.The latitude at equator is zero and it is 90° at poles.
• Declination angle (δ )
• It is the angle made by the line joining the centers of sun and earth
with the equatorial plane as shown in Figure.

Solar Radiation
• The angle of declination varies when earth revolves around the sun.
• It has maximum value of 23.45° when earth achieves a position in its orbit
corresponding to 21 June and it has minimum value of -23.45° when earth is
in orbital position corresponding to 22 December.
• The angle of declination is taken positive when it is measured above the
equatorial plane in the northern hemisphere. The angle of declination can be
given by
where n is the number of days counted from 1 January.

Solar Radiation
• Hour angle (ω)
• The hour angle at any instant is the angle through which the earth has to turn to bring the
meridian of the observer directly in line with sun's rays.
• It is an angular measure of time. It is the angle in degree traced by the sun in 1 h with reference
to 12 noon of the location. The convention of measuring it is that the noon-based calculated
local apparent time (LAT) is positive in afternoon and negative in forenoon as shown in Figure .
• The earth completes one rotation (360°) in 24 h. Hence, 1 h corresponds to 15° of earth's
rotation. As at solar noon the sun rays is in line with local meridian or longitude, the hour angle
at that instant is zero.
• The hour angle can be given as follows ω = [Solar time - 12) x 15°

Solar Radiation
• Inclination or altitude angle (α )
• It is the angle between sun's ray and its projection on horizontal
surface as shown in Figure.

Solar Radiation
ANGLE BETWEEN INCIDENT BEAM AND NORMAL TO INCLINED SURFACE
(θ)

Solar Radiation
• Zenith angle (θz)
• It is the angle between sun's ray and normal to the horizontal plane as shown in
Figure
• Solar azimuth angle (γs)
• It is the angle between the projection of sun's ray to the point on the horizontal
plane and line due south passing through that point. The value of the azimuth angle
is taken positive when it is measure form south towards west.
• Angle of incidence (θ )
• The angle of incidence for any surface is defined as the angle formed between the
direction of the sun ray and the line normal to the surface as shown in the Figure
• Tilt or slope angle (β )
• The tilt angle is the angle between the inclined slope and the horizontal plane as
shown in the Figure
• Surface azimuth angle (γ )
• It is the angle in horizontal plane between the line due south and the horizontal
projection of normal to the inclined plane surface. It is taken as positive when
measured form south towards west.

Solar Radiation
• ANGLE BETWEEN INCIDENT BEAM AND NORMAL TO INCLINED SURFACE (θ)
• The angle of incidence can be given by the following expression.

Solar Radiation
• SUNRISE, SUNSET AND SOLAR DAY LENGTH
• At sunrise, the sun rays propagate parallel to the horizontal surface. Hence, the
angle of incidence and zenith angle are equal and have the value of 90° (θ = θz
= 90°). The corresponding hour angle can be given as
• SOLAR RADIATION DATA
• To design a solar energy system or to evaluate the potential of any solar
application at any place, it is necessary to have (i) monthly average, (ii) daily
solar radiation data on a horizontal surface consisting of both global and
diffuse radiation and (iii) daily solar radiation data with certain tilt angles. The
typical daily solar radiation data on clear and cloudy days as measured on a
horizontal surface are as shown in Figure

Solar Radiation
Daily variation of global and diffuse radiation on a horizontal surface. (a) Clear day and (b) Cloudy day

Solar Radiation
• MEASUREMENTS OF SOLAR RADIATION DATA
• Solar energy reaching earth's surface consists of two components
• Direct solar energy and diffuse solar energy.
• Direct solar energy is the energy reaching earth's surface with the
sun's beam.
• The sun's beam has high heat content which may cause sun's
burns.
• It is also described as shadow producing radiation.
• Diffuse solar energy is formed as the result of the atmosphere
attenuation, scattering and beam's redirection.
• As the name suggests, it has intensity much lower than beam's
intensity but it propagates uniformly in all directions.
• The difference between beam and diffuse radiation is given below

Solar Radiation
• MEASUREMENTS OF SOLAR RADIATION DATA
• Beam radiation :
• It is the radiation reaching directly from sun
• It has unidirectional propagation
• It is very intense radiation and it can produce sun burns and shadow
• It is available highest during near sky days which is shown in fig(a)

Solar Radiation
• Diffused radiation :
• It is the radiation reaching after attenuation, scattering and redirection.
• It has uniform propagation in all direction
• It is mild radiation. Typical values of daily diffuse radiation is 1-20 MJ/m2
• It has usually highest values during the cloudy conditions which is shown in fig
(b)

Solar Radiation
• Propagation of beam and diffuse radiation. The combination of both
forms of solar energy incident on a horizontal plane at earth's
surface is called global solar energy, which is given by
• Hg = Hd + Hb cos θz

Solar Radiation
• The solar radiation data can be measured in the following way:
• Global radiation. It can be measured using a pyranometer.
Pyranometer is a Greek word composed of Pyr (fire) + ano
(something above) + meter (measurement), which means
"measuring fire from above", that is, measuring sun's radiation.
• Diffuse radiation: It is also measured by pyranometer using a
shading ring to stop direct beam radiation to the instrument so that
the instrument measures only diffuse radiation.
• Beam radiation: It is measured using a pyrheliometer. The
instrument has a long narrow tube to collect only beam radiation
from the sun.
• Sunshine recorder: The sunshine hours in a day are measured using
a sunshine recorder.

Solar Radiation
• A pyranometer is radiation energy measuring device which is designed to measure
global or total radiation usually on a horizontal plane but it can also be used to
measure on an inclined plane.
• When instrument is shaded using a shading ring to prevent beam radiation reaching
its detector, the pyranometer in this condition can measure only diffuse radiation.
• The instrument consists of a thermopile whose sensitive surface forms its hot
junction. This surface is blackened circular in shape and exposed to radiation. So that
the surface should respond to radiation of all wavelengths so as to absorb them as a
black body.
• The temperature of hot junction increases depending on amount of the incident
radiation energy absorbed by it.
• The cold junction of the thermopile is completely shaded to prevent the radiation
reaching (shown as white). The sensing element is covered by two concentric
hemispherical glass domes to shield it from wind and rain. This also helps to reduce
or prevent heat inflow to the detector by the convection heat transfer from air.

Solar Radiation
• The instrument is protected from direct solar radiation by mounting a circular guard
plate at the level of detector which is also painted white to prevent the absorption of
any solar radiation.
• The instrument can be accurately levelled by means of three leveling screens
provided at its base. Inside the instrument, a tube containing silica gel is provided to
keep the interior of the instrument dry without the adverse effect of moisture; that
is, moisture should not be deposited inside the glass of the domes.
• The pyranometer is also provided with a shadow band or occulting disc to prevent
the direct beam radiation from reaching the sensing element and it is used when
instrument is required to measure diffuse radiation.
• The temperature difference between the hot and the cold junction is the function of
radiation falling on the sensitive surface (black junction).
• The thermopile is designed to measure radiation in linear manner which is shown in
Fig.
• The instrument has a voltage output of approximately 9µV/(W/mV) which is
recorded on a chart paper by a recorder.
• The daily values of radiation is recorded on hourly basis and a pyranogram is
obtained which is a graph of radiation incident versus hour lines.

Solar Radiation
• Pyrheliometer
• It is an instrument to measure beam radiation. It has a narrow long tube
called collimator tube to collect beam radiation from the sun at normal
incidence. The long collimator tube ensures that a beam radiation having field
of view limited to a solid angle of 5.5° should be collected.
• The collimator tube is further blankened from inside and provided diaphragm
along the length to absorb any radiation entering the tube but incident at any
angle outside the designed angle of 5.50°.
• At the base of the collimator tube, a wire-wound thermopile having sensitivity
of about 8 µV/(W/ m2) is positioned which has impedance of about 200 Ώ .
• The tube is sealed with dry air with the help of silica gel to avoid any
absorption of beam radiation owing to presence of moisture in the air.
• A tracker is provided in the instrument to keep the collimator tube
continuously face the sun rays for the measurement.
•

Solar Radiation
Sunshine recorder

Sunshine Recorder
• Sunshine recorder
• The instrument is used to measure the duration of bright sunshine hours
in a day.
• It mainly consists of a glass sphere (diameter = 10 cm) mounted on its
axis parallel to the axis of earth within a spherical section called bowl as
shown .
• The bowl and glass sphere are arranged in such a way that sun's rays are
focused sharply as a spot on recording paper card held in a groove in the
bowl.
• The card is made of a special coated paper with the printed time scale.
The paper card has the property to burn a spot wherever sun's rays fall
on it.
• As the sun moves, the focused bright sun's rays burn a path along the
card paper.
• The length of the trace formed by the burn spots on the card paper is
the measure of the duration of sunshine hours in a day. To take care of
different seasons of the year, three overlapping pair of grooves to fix the
card paper are provided in the bowl of the instrument.

Solar Radiation
• SOLAR COLLEC TORS
• Solar energy reaching earth's surface has small intensity of about 5-
7.5 kWh/m2. Hence, for any worthwhile application, sufficient solar
energy should be collected from a large ground area with the help
of many solar collectors.
• Solar collector is a device for collecting solar radiation and then
transferring the absorbed energy to a fluid passing through it.
• A solar collector absorbs solar energy in the form of heat and
simultaneously transfers this heat to a fluid so that the heat can be
transported by the fluid. The transport fluid takes this transferred
heat from the collector and delivers it to a thermal storage tank,
boiler or heat exchanger so that it can be utilized in a solar thermal
system. Hence, solar collector is essential and it forms the first
basic unit in a solar thermal system.

Flat Plate Collector
•Flat Plate Collector
• Principle of conversion
• If incident radiation is unity on a body, then radiation can be absorbed,
reflected, transmitted. If absorption coefficient, reflection coefficient and
transmission coefficient are α, p and ζ, respectively, then
• The absorbed part of radiation is responsible for increasing the temperature of
the body. If the body gains temperature and temperature becomes ζ, it also
starts radiating heat to surroundings as per the Boltzmann equation
Where σ' is the Boltzmann
constant and € is the emission coefficient). When body has equilibrium temperature, where HG Intensity
Global Radiation

• Principle of conversion
• The equilibrium temperature (T) depends on higher value of absorption
coefficient (α),lower value of emission coefficient (€) and higher value of
intensity of incident radiation.
• The absorption coefficient can be increased by painting the body black.
Emission coefficient can be reduced by (i) insulation of body and (ii) lowering of
re radiation from the body by using glass cover.
• The intensity of radiation can be increased by using any means helping to
concentrate the incident radiation.

• Components of the flat plate collector
• A flat plate collector consists of following essential components:
• Absorber plate: It is meant to intercept and absorb incident solar radiation. It is
primarily a blackened heat absorbing plate usually made of copper, aluminium or steel.
It may also be given a coating to minimize the emission of heat from its surface.
• Transparent cover : It is made of one or more transparent sheets of glass or plastic. It
is placed above the absorber plate. The cover allows radiation to reach the absorber
plate but it prevents any re radiation and heat loss due to convection.
• Fluid tubes or channels : Fluid tubes or channels are arranged in thermal contact with
the absorber plate so that heat can be transferred from the absorber plate to the fluid
in the tubes or channels.
• Thermal insulation : The thermal insulation is provided under the absorber plate and
fluid tubes to minimize any heat loss by transmission or convection from the absorber
plate and fluid tubes.
• Tight container or box: All the above components of the collector are protected by a
tight container or box as shown in Figure .

SOLAR WATER DISTILLATION
• What is Distillation? Solar water distillation is the process of using energy from
the sunlight to separate freshwater from salts or other contaminants. The
untreated water absorbs heat, slowly reaching high temperatures. The heat
causes the water to evaporate, cool, and condense into vapour, leaving the
contaminants behind.

• Distillation is a process wherein a liquid or vapour mixture of two or more
substances is separated into its component fractions of desired purity, by the
application and removal of heat.
• Process of vaporizing a liquid, condensing the vapor, and collecting the
condensate in another container.
Liquid to Vapor
Vapor to Liquid
• Liquid and Vapor always in equilibrium.
Liquid Vapor

• Working
• Water to be cleaned is poured into the basin. The glass cover allows the solar
radiation to pass into the basin, which is mostly absorbed by the blackened base.
This interior surface uses a blackened material to improve absorption of the
sunrays. The water begins to heat up and the moisture content of the air trapped
between the water surface and the glass cover increases. The heated water
vapor evaporates from the basin and condenses on the inside of the glass cover.
In this process, the salts and microbes that were in the original water are left
behind. Condensed water trickles down the inclined glass cover to an interior
collection trough and out to a storage bucket. Feed water should be added each
day that roughly exceeds the distillate production to provide proper flushing of
the basin water and to clean out excess salts left behind during the evaporation
process.

• What are the applications of solar distillation?
• In the Solar distillation process solar energy is used to evaporate water and its
condensate is collected within the same closed system.
• Unlike other forms of water purification methods like desalination, this
methodology can be used to turn salt or brackish water into fresh drinking
water.
• What are the advantages of solar distillation?
• It effectively produces distilled water after removal of impurities. The major
advantage of this is the use of solar energy instead of electrical energy generated
from conventional fuels. This helps in producing potable water without degrading
our environment.
What is solar distillation disadvantages?
low efficiency and deposition of salt, scale and corrosion.

SOLAR POND ELECTRIC POWER PLANT

• What is solar cell :
• A solar cell (also known as a photovoltaic cell or PV cell) is defined as an
electrical device that converts light energy into electrical energy through the
photovoltaic effect.
• A solar cell is basically a p-n junction diode. Solar cells are a form of
photoelectric cell, defined as a device whose electrical characteristics – such as
current, voltage, or resistance – vary when exposed to light.
• Individual solar cells can be combined to form modules commonly known as
solar panels.
• The common single junction silicon solar cell can produce a maximum open-
circuit voltage of approximately 0.5 to 0.6 volts.
• By itself this isn’t much – but remember these solar cells are tiny. When
combined into a large solar panel, considerable amounts of renewable energy
can be generated.

• Construction of Solar Cell
• A solar cell is basically a junction diode, although its construction it
is little bit different from conventional p-n junction diodes.
• A very thin layer of p-type semiconductor is grown on a relatively
thicker n-type semiconductor.
• We then apply a few finer electrodes on the top of the p-type
semiconductor layer.
• These electrodes do not obstruct light to reach the thin p-type layer.
Just below the p-type layer there is a p-n junction.
• We also provide a current collecting electrode at the bottom of the
n-type layer.
• We encapsulate the entire assembly by thin glass to protect the
solar cell from any mechanical shock.

• Working Principle of Solar Cell
• When light reaches the p-n junction, the light photons can easily enter in the
junction, through very thin p-type layer. The light energy, in the form of
photons, supplies sufficient energy to the junction to create a number of
electron-hole pairs. The incident light breaks the thermal equilibrium condition
of the junction. The free electrons in the depletion region can quickly come to
the n-type side of the junction.

• Working Principle of Solar Cell
• Similarly, the holes in the depletion can quickly come to the p-type side of the
junction. Once, the newly created free electrons come to the n-type side,
cannot further cross the junction because of barrier potential of the junction.
• Similarly, the newly created holes once come to the p-type side cannot further
cross the junction became of same barrier potential of the junction.
• As the concentration of electrons becomes higher in one side, i.e. n-type side of
the junction and concentration of holes becomes more in another side, i.e. the
p-type side of the junction, the p-n junction will behave like a small battery cell.
• A voltage is set up which is known as photo voltage. If we connect a small load
across the junction, there will be a tiny current flowing through it.

• Photovoltaic system for electric power generation :
• How Solar PV Systems Work

• Solar photovoltaic (PV) panels use cells containing a semi-conductor material to
capture the sun’s energy and convert solar radiation into electricity.
• The most commonly used semi-conductor material is silicon, which is an
abundant natural resource found in sand. When light strikes the cell a certain
amount of energy is absorbed within the semiconductor material, knocking
electrons, the negatively charged particles that form the basis of electricity,
loose.
• Most PV cells have two layers of semi-conductor material, one positively
charged and one negatively charged. When light shines on the semi-conductor
the electric field across the junction between these two layers causes electricity
to flow, generating direct current (DC).
• By placing metal contacts on the top and bottom of the PV cell, we can draw
that current off for external use.

• Solar PV electric panels do not require bright sunlight in order to operate,
meaning that you can still generate electricity on cloudy days, however in
general the greater the intensity of light the higher the flow of electricity.
Although, due to the reflection of sunlight, days with slight cloud can result in
higher energy yields than days with a completely cloudless sky.
• It is important to realise that you can only use your free solar electricity when it
is being generated – so unless you also invest in batteries to store power for
use in the evenings and at night, you will need to pay for your energy use as
normal when the panels are not producing electric.

• Application of Photovoltaic system :
• Water Pumping: Solar power is commonly used for water pumping facility
which has been proved more effective in villages for agricultural purposes
• Cooking: solar cookers are the most happening in the present market. Solar
cookers are commercially available and are easy to operate and maintain.

• Heating: solar water heaters and air heaters have been very common since
decades even before PV cells could exist.
• Lighting: solar photovoltaic lighting system can be used for street lights, and
rural areas.
• Traffic Signals: Traffic signals at all areas can easily be operated using solar
panels
• Cold Storage: Solar energy can be used for cold storage as well as air
conditioning application.

• Solar PV System in Space: The solar arrays arranged in space station produce
more than required power for the space station

SOLAR ENERGY Module 2 (introduction, thermal and pv)

More Related Content

What's hot (20)

Similar to SOLAR ENERGY Module 2 (introduction, thermal and pv) (20)

Recently uploaded (20)

SOLAR ENERGY Module 2 (introduction, thermal and pv)