Spooky2 Contact Mode Instructions
Download as PPT, PDF0 likes1,219 views
This document provides instructions for using Spooky2 devices in contact mode, including connecting Spooky Hand Cylinders and Spooky Tens Pads to a generator via Spooky Boost 2.0 or directly. It explains that contact mode requires higher amplitudes of 14-20 volts and there are presets in the Spooky2 software for contact killing and healing modes.
Spooky2 Contact Mode Instructions
- 1. Spooky2 Spooky2 Contact Mode Instructions Our Users & Team
- 2. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com Here are detailed instructions on Spooky2 contact mode with Spooky Hand Cylinders and Spooky Tens Pads.
- 3. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com Connection Spooky Hand Cylinders There are three different ways to connect Spooky Hand Cylinders depending on whether you use Spooky Boost 2.0 or not, and they’ re both very simple. First, connection via Spooky Boost 2.0:
- 4. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com A. Spooky Hand Cylinders with Spooky Boost 2.0 Connect the BNC-to-alligator clips cable that came with your generator to the Colloidal Silver output of Spooky Boost 2.0. Then connect each alligator clip to a cylinder as detailed below.
- 5. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com
- 6. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com B. Spooky Hand Cylinders Direct Connect Connect the BNC-to-alligator clips cable that came with your generator to Out 1 of the generator. Then insert the alligator clips into the holes located at the plastic end of each Spooky Hand Cylinder.The image below right shows the correct orientation for your Spooky Hand Cylinders.
- 7. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com
- 8. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com
- 9. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com C. Without Boost 2.0 to Get Quadruple Power. Connect both cables to Out 1 and Out 2. Now separate the red clips from the black ones - we won’t be connecting the black clips, so you can wrap each one in paper masking tape. Now connect one red clip to a Spooky Tube electrode, and do the same for the other red clip - each red clip should be attached to an electrode.
- 10. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com
- 11. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com Spooky Tens Pads The connection of Spooky Tens Pads is the same as Spooky Hand Cylinders (except that the adapter cable is Tens Cable).
- 12. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com Note: 1. Contact Mode needs higher amplitudes to achieve adequate body penetration (14–20 volts). 2. Make sure the alligators have direct contact with the steel part of the tube for good connection.
- 13. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com Contact Mode settings There are JW-Killing ( Contact) and JW-Healing(Contact) presets in Spooky2 software. They are applicable to both Hand Cylinders and Tens Pads.
- 14. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com Thank you!