Syllabus chs 9
- 1. Department of Education Region III Division of Pampanga District of Guagua NATIVIDAD HIGH SCHOOL SYLLABUS FOR TLE – ICT 9 FIRST QUARTER SY 2018-2019 CONTENT STANDARD The learner demonstrates understanding of basic concepts, underlying theories and core competencies in computer systems and networks. PERFORMANCE STANDARD The learner independently provides quality and marketable service in computer hardware servicing in terms of computer systems and networks installation, and diagnoses and troubleshoots computer systems as prescribed by TESDA Training Regulations. TIME FRAME CONTENT LEARNING COMPETENCIES STRATEGIES/ACTIVITIES EVALUATION Introduction 1. Relevance of the course 2. Basic concepts and core competencies in Computer Hardware Servicing 3. Career opportunities- 1. Discuss the relevance of the course 2. Explain basic concepts, theories and core competencies in computer hardware servicing 3. Explore opportunities in computer hardware servicing as a career CONTENT STANDARD
- 2. Department of Education Region III Division of Pampanga District of Guagua NATIVIDAD HIGH SCHOOL The learner demonstrates understanding of one’s PECs in in computer hardware servicing. PERFORMANCE STANDARD The learner recognizes his/her PECs and prepares an activity plan that aligns with the PECs of a practitioner/entrepreneur’s in the computer hardware servicing business. LESSON 1: Personal Entrepreneurial Competencies - PECs (PC) TIME FRAME CONTENT LEARNING COMPETENCIES STRATEGIES/ACTIVITIES EVALUATION Week1 1. Assessment of Personal Competencies and Skills (PECs) vis-à-vis a practicing entrepreneur/ employee in locality 1.1 Characteristics 1.2 Attributes 1.3 Lifestyle 1.4 Skills 1.5 Traits 2. Analysis of PECs in relation to a practitioner’s LO 1. Recognize PECs needed in Computer Hardware Servicing 1.1 Assess one’s PECs: characteristics, attributes, lifestyle, skills, traits 1.2 Assess practitioner’s PECs: characteristics, attributes, lifestyle, skills, traits 1.3 Compare one’s PECs with that of a practitioner /entrepreneur’s 1.4 Align one’s PECs with those of a practitioner/entrepreneur’s Pre-assessment: A. Matching Type B. Multiple Choice C. Self-Assessment Activity 1: Assessing the PECs of a Practitioner Activity 2: Aligning one’s PECs Activity 3: My PECs that need to be further improved Post-Assessment Short quiz
- 3. Department of Education Region III Division of Pampanga District of Guagua NATIVIDAD HIGH SCHOOL 3. Align, strengthen and develop ones PECs based on the results CONTENT STANDARD The learner demonstrates understanding of environment and market in computer hardware servicing in one’s locality. PERFORMANCE STANDARD The learner independently creates a business vicinity map reflective of the potential computer hardware servicing market within the locality. LESSON 2: Environment and Market (EM) TIME FRAME CONTENT LEARNING COMPETENCIES STRATEGIES/ACTIVITIES EVALUATION Week 2 1. Market (Town) 2. Key concepts of Market 3. Players in the market (Competitors) 4. Products and services available in the market LO 1. Recognize and understand the market in computer hardware servicing 1.1 Identify the players/ competitors within the town 1.2 Identify the different products/services available in the market Pre-Assessment Name things which are under Needs and those under wants Explain the ways by which you may generate possible ideas for business Analyzing Strengths, Weaknesses, Opportunities
- 4. Department of Education Region III Division of Pampanga District of Guagua NATIVIDAD HIGH SCHOOL 5. Market (Customer) 6. Key concepts of identifying and understanding the consumer 7. Consumer Analysis through: 7.1 Observation 7.2 Interviews 7.3 Focus Group Discussion 7.4 Survey LO 2. Recognize the potential customer/market in computer hardware servicing 2.1 Identify the profile of potential customers 2.2 Identify the customer’s needs and wants through consumer analysis 2.3 Conduct consumer/market analysis Activity 1: Mini Survey Activity 2: Screening Business Ideas Activity 3: Survey Questionnaire to Determine Potential Customers Post Assessment CONTENT STANDARD The learner demonstrates understanding of planning, installing and testing computer systems and networks. PERFORMANCE STANDARD The learner independently demonstrates the correct planning, installing and testing of computer systems and networks. LESSON 3: Installing Computer Systems and Networks (CN) TIME FRAME CONTENT LEARNING COMPETENCIES STRATEGIES/ACTIVITIES EVALUATION Week 3 – Week 12 1. OHS policies and procedures LO 1.Plan and prepare for installation Pre-Diagnostic Test Make an Accident Report Form Applying OHS Policies Short quiz
- 5. Department of Education Region III Division of Pampanga District of Guagua NATIVIDAD HIGH SCHOOL 2. Occupational Health and Safety laws 3. Personal safety 4. Workplace hazards 5. Environment laws 6. Computer Peripherals/ Devices /Systems 7. Personal computer systems and devices 8. Peripherals 9. Networking devices 10. Tools, equipment and testing devices 1.1 Observe OHS policies and procedures in planning for installation activity in accordance with requirements 1.2 Familiarize oneself with computer peripheral/ devices/systems in accordance with established procedures correct operation and safety 1.3 Consult appropriate/ technical personnel to ensure that work is coordinated with others who are involved in the activity 1.4 Determine the location of the devices/systems to be used 1.5 Obtain materials necessary to complete the work in accordance with established procedures 1.6 Check the materials received against job requirements Name and explain the different types of computers based on the operational principle. Classify the different types of computers based on their sizes and functionalities. Explain the devices of a computer Explain the different networking devices Identify the different types of computers based on the operational principle. Identify the posted pictures of computers based on their sizes and functionalities. Puzzle: Look for 10 hidden computer devices in the puzzle and classify whether they belong to input, output or storage devices Short quiz
- 6. Department of Education Region III Division of Pampanga District of Guagua NATIVIDAD HIGH SCHOOL CONTENT STANDARD The learner demonstrates understanding of planning, installing and testing computer systems and networks. PERFORMANCE STANDARD The learner independently demonstrates the correct planning, installing and testing of computer systems and networks. LESSON 3: Installing Computer Systems and Networks (CN) TIME FRAME CONTENT LEARNING COMPETENCIES STRATEGIES/ACTIVITIES EVALUATION Week 3 – Week 7 11. Requirements for the job 12. Job orders 13. Request forms 14. Report sheets 15. Safety procedures 16. System’s specifications LO 2. Install equipment/ devices and systems 2.1 Follow OHS procedures in installing devices, systems, networking devices, and peripherals 2.2 Comply with the requirements in installing devices,/systems, networking devices, and peripherals Apply/Observe safety precautions in the work place Check system requirements for hardware devices Short quiz
- 7. Department of Education Region III Division of Pampanga District of Guagua NATIVIDAD HIGH SCHOOL SECOND QUARTER CONTENT STANDARD The learner demonstrates understanding of planning, installing and testing computer systems and networks. PERFORMANCE STANDARD The learner independently demonstrates the correct planning, installing and testing of computer systems and networks. LESSON 3: Installing Computer Systems and Networks (CN) TIME FRAME CONTENT LEARNING COMPETENCIES STRATEGIES/ACTIVITIES EVALUATION Week 13 - Week 19 17. Installation of equipment/ devices, peripherals and networking devices 18. Install computer systems 19. Basic computer configuration set up LO 2. Install equipment/ devices and systems 2.3 Install computer systems, networking devices and peripherals in accordance with job requirements 2.4 Perform variations in installing devices and systems in Demonstration teaching on how to: A. disassemble a system unit B. assemble a system unit C. connect PC peripheral D. install operating system Group Activity: A. PC Disassembly B. PC Assembly C. Connecting PC Peripherals Rubrics will be used to grade the performance
- 8. Department of Education Region III Division of Pampanga District of Guagua NATIVIDAD HIGH SCHOOL accordance with customer/client’s requirements 2.5 Obtain approval from appropriate personnel before implementing contingency procedures 2.6 Respond to unplanned events or conditions in accordance to established procedures 2.7 Check the quality of the work undertaken in accordance with the established procedures Short quiz Week 20 - Week 22 20. Safety procedures 21. Burning or testing installed equipment/devices 22. Computer network systems connectivity 23. Reporting and documentation procedures LO 3. Conduct test on the installed computer system 3.1 Follow OHS policies and procedures in conducting tests 3.2 Check circuits and systems being isolated using specified testing procedures 3.3 Test devices, systems and/or installation to determine its conformity with the requirements Boot the system end and observe the system for any indications of problems Create a video demonstrating how to install the hardware components
- 9. Department of Education Region III Division of Pampanga District of Guagua NATIVIDAD HIGH SCHOOL 3.4 Undertake final inspections on the installed devices, systems to ensure conformity with the requirement 3.5 Accomplish technical reports on the tests conducted 3.6 Follow procedures in forwarding documentation to appropriate personnel and/or authority on the test conducted
- 10. Department of Education Region III Division of Pampanga District of Guagua NATIVIDAD HIGH SCHOOL THIRD QUARTER CONTENT STANDARD The learner demonstrates understanding of the underlying concepts and principles of diagnosing and troubleshooting computer systems. PERFORMANCE STANDARD The learner independently diagnoses and troubleshoots computer systems as prescribed by TESDA Training Regulations. LESSON 4: Diagnosing and Troubleshooting Computer Systems (DT) TIME FRAME CONTENT LEARNING COMPETENCIES STRATEGIES/ACTIVITIES EVALUATION Week 23 – Week 29 1. Safety precautions 2. Types of computer systems errors 3. Diagnosing computer systems 4. Manual diagnosis 5. Software diagnosis LO 1. Plan and prepare for diagnosis of computer systems errors 1.1 Follow OHS procedures in planning and preparing diagnosis of computer systems errors 1.2 Determine the computer systems errors using manual and software diagnosis
- 11. Department of Education Region III Division of Pampanga District of Guagua NATIVIDAD HIGH SCHOOL Week 30 – Week 34 6. Safety precautions 7. Basic concepts of electricity 8. Techniques for diagnosing computer systems 9. Diagnosing tools: 9.1 Manual 9.2 Software 10. Computer systems and network configurations LO 2. Diagnose and configure computer systems and networks 2.1 Follow OHS procedures in planning and preparing diagnosis of computer systems and network errors 2.2 Identify the diagnosed computer systems and network errors based on the job requirements 2.3 Configure computer systems and networks
- 12. Department of Education Region III Division of Pampanga District of Guagua NATIVIDAD HIGH SCHOOL FOURTH QUARTER CONTENT STANDARD The learner demonstrates understanding of the underlying concepts and principles of diagnosing and troubleshooting computer systems. PERFORMANCE STANDARD The learner independently diagnoses and troubleshoots computer systems as prescribed by TESDA Training Regulations. LESSON 4: Diagnosing and Troubleshooting Computer Systems (DT) TIME FRAME CONTENT LEARNING COMPETENCIES STRATEGIES/ACTIVITIES EVALUATION Week 35 – Week 41 11. Safety precautions 12. Determining defective components 13. Repairing/replacing different components 13.1 Wiring techniques 13.2 Power supplies 14. Basic networking errors LO 3. Inspect and test the configured computer systems and networks 3.1 Follow OHS procedures in inspecting and testing configured computer systems and networks 3.2 Inspect configured computer systems and networks
- 13. Department of Education Region III Division of Pampanga District of Guagua NATIVIDAD HIGH SCHOOL 3.3 Replace defective components 3.4 Reinstall defective computer systems 3.5 Identify network errors 3.6 Repair network errors based on standard procedures 3.7 Test the configured computer systems and networks Week 42 – Week 44 15. Safety precautions 16. Guidelines for testing computer systems and networks LO 4. Test Systems and Networks 4.1 Follow OHS procedures in testing systems and networks 4.2 Test computer systems and networks in accordance with the job requirements 4.3 Accomplish technical reports on the tests conducted Prepared by: LEVI RUTH F. ADUNA ICT Teacher