The Dynamic AD AS Model
Download as PPTX, PDF8 likes21,758 views
This document provides an overview of the dynamic AD-AS macroeconomic model. It describes the key components of the model - the Solow curve, which shows potential GDP growth based on productivity and supply factors; the Aggregate Demand curve, which plots inflation and GDP combinations consistent with a given money supply and velocity of money; and the Short-Run Aggregate Supply curve, which shows the relationship between inflation and GDP due to price adjustment dynamics. The document uses the model to analyze the effects of changes in money supply, confidence, productivity, and policy tools on inflation and GDP growth. It explains that while monetary and fiscal policy can boost demand in the short-run, they cannot increase GDP permanently above potential in response to a negative
The Dynamic AD AS Model
- 1. The dynamic AD-AS model A brief overview of a useful macroeconomic framework Anthony J. Evans Associate Professor of Economics, ESCP Europe www.anthonyjevans.com (cc) Anthony J. Evans 2016 | http://creativecommons.org/licenses/by-nc-sa/3.0/
- 2. Introduction • This presentation will provide a brief overview of the dynamic AD-AS model • It can be used in conjunction with the YouTube video: – “An introduction to the dynamic AD-AS model” September 2014* • The model originates with Tyler Cowen and Alex Tabarrok** 2* See: https://youtu.be/qXYNUjWYopo ** Cowen & Tabarrok, (2009) Modern Principles: Macroeconomics, Worth.
- 3. The dynamic AD-AS model • It is a useful and relatively simple framework to make sense of (i) economic shocks, and (ii) policy responses • I think it is an improvement over the traditional model and a useful tool to understand • The main difference with the standard AD-AS model: – Instead of showing the price level and real GDP on the two axes, it shows inflation and real GDP growth – A Solow curve instead of a Long Run Aggregate Supply (LRAS) curve – An Aggregate Demand (AD) curve based on the equation of exchange instead of Pigou's wealth effect, Keynes's interest-rate effect, and Mundell-Fleming's exchange-rate effect – A Short Run Aggregate Supply curve (SRAS) based on the signal extraction problem rather than labour markets 3
- 4. We can look at each of the three components in turn 4 P Y AD (M+V=5%) Y* = 3% 2% SOLOW SRAS (Pe = 2%)
- 5. The Solow curve • The Solow curve shows the growth rate that would exist – If prices are perfectly flexible – Given the existing real factors of production – This follows from the production function used in the Solow growth model Y* = f (A,K,L) • Y* is a function of capital (K), labour (L) and multifactor productivity (A) • We can think of Y* as being the potential growth rate • Since Y* is independent of inflation (P), it is drawn as a vertical line • Let’s assume that Y* = 3% • Causes of shifts: – Weather, wars, strikes – R&D, innovation, infrastructure, competitiveness – Education/training, labour market flexibility 5 We call these “real”, “productivity”, or “supply” shocks This invokes the Classical Dichotomy – the claim that real variables are determined by real factors Unlike the LRAS the Solow curve is a Real Business Cycle (RBC) model that incorporates any real shock P YY* = 3% SOLOW
- 6. The Aggregate Demand (AD) curve • Definition: – AD is “total spending” – It is combinations of P and Y consistent with a specified rate of spending growth • It is based on the equation of exchange: M + V = P + Y • Let’s assume that AD (i.e. M+V) = 5%. The AD curve plots the various ways it can be split between P + Y • Causes of shifts: – Change in M – Change in V • The “velocity of circulation” is the inverse of the demand for money (Md). If Md is high, people hold onto it, and V falls • By definition V is anything that affects P+Y other than M • E.g. wealth, stimulus, tax changes • If we look at the components of AD we can see sources of changes in V • We can summarise V as “confidence” 6The equation of the AD curve is P=(M+V)-Y and the slope is -1 Note that changes in V tend to be temporary – you cannot have permanent increases in any of these components. This supports the claim that only increases in M can generate sustained inflation. P Y AD (M+V=5%)2% 3% 1% 2% 3% 4% AD = C(i - , y-t + )+ I(i - , y + )+G+(X - M) We can view QE as a way for central banks to switch from using i/r to boost AD (via an impact on V) to using M directly
- 7. The Short Run Aggregate Supply (SRAS) curve • Definition – Relationship between P and Y for a given expected inflation rate • SRAS shows the supply side of the economy whilst prices adjust • There is a positive relationship between inflation and output due to signal extraction problems – If prices are rising at a faster rate than wages (which constitute a large share of the firms costs), firms will appear to be profitable and will expand their output – If prices fall quicker than wages, production will appear to be unprofitable, and they will reduce output • The SRAS curve is flatter below Y* and steeper above Y* is because wages are especially sticky in a downwards direction. Basic money illusion means that workers tend to be hostile to nominal wage cuts. In addition there’s a limit to how fast the economy can grow – it can’t indefinitely exceed the Solow growth rate • Cause of shifts – Change in inflation expectations (Pe) 7 P Y SRAS (Pe = 2%)
- 8. The dynamic AD-AS model in equilibrium 8 P Y AD (M+V=5%) Y* = 3% 2% SOLOW SRAS (Pe = 2%) Assume Y* = 3% and AD (M+V) = 5% This implies P = 2% Assume inflation expectations are consistent with this, also at 2% If prices are perfectly flexible we only need the Solow curve and AD. We can call these 2 curves a Real Business cycle model
- 9. We can use this model to answer some simple questions: 1. In a Real Business Cycle model, what is the impact of an increase in the money supply? 2. In a Real Business Cycle model, what is the impact of a collapse in confidence? 3. What would be the impact of the rise of 3D printing, or some other increase in productivity? 4. What happens if there’s a hurricane? 5. What is the impact of a reduction in the growth rate of the money supply? 6. How can monetary or fiscal policy help us avoid a recession? 7. Why doesn’t monetary or fiscal policy help if the economy suffers a negative productivity shock? 9
- 10. 1. In a Real Business Cycle model, what is the impact of an increase in the money supply? 10 P Y AD (M+V=5%) Y* = 3% SOLOW 2% AD (M+V=10%) 7% Assume Y* = 3% and AD (M+V) = 5% Hence P = 2% Now assume M increases by 5% AD is now 10% We move up the Solow curve and P rises to 7% An increase in M leads to a proportional increase in P With no extra supply the extra aggregate demand merely bids up prices Result: Higher inflation Same growth In an “RBC model” we are always at Y* We can ignore the SRAS M by 5% P by 5%
- 11. 2. In a Real Business Cycle model, what is the impact of a collapse in confidence? 11 Assume Y* = 3% and AD (M+V) = 5% Hence P = 2% Now assume V falls by 3%.* AD is now 2%. We move down the Solow curve and P falls to -1% Result: Lower inflation Same growth P Y SOLOW AD (M+V=5%) 2% Y* = 3% (M+V=2%) -1% * A Keynesian economist might blame a fall in V due to “animal spirits” whilst Austrian economists would call it “regime uncertainty” In an “RBC model” we are always at Y* We can ignore the SRAS in the real world many economists believe that prices don’t adjust immediately The signal extraction problem means that people respond to nominal shocks, and so Y may deviate from Y* The SRAS curve is needed to show this process
- 12. 3. What would be the impact of the rise of 3D printing, or some other increase in productivity? 12 P Y AD (M+V=5%) Y* = 3% 2% SOLOW SRAS (Pe = 2%) SOLOW’ 1% SRAS (Pe = 1%) 4% A B In a section on sticky prices Cowen and Tabarrok argue that the above only holds if prices are flexible. Sticky prices would mean that SRAS shifts even further, such that it intersects the AD curve at a point beyond B. In this sense sticky wages amplify real shocks. For simplicity, for now, we assume flexible prices. Productivity growth will cause Y* to shift to the right (e.g. to 4%) If total spending doesn’t change, inflation will fall from 2% to 1% We move down the AD curve from A to B As inflation falls below expectations people will reduce their inflation expectations, causing SRAS to shift down Inflation might even become negative, but this would be benign Result: Lower inflation Higher growth
- 13. 4. What happens if there’s a hurricane? 13 P Y SOLOW AD (M+V=5%) 2% Y* = 3% SRAS (Pe = 2%) Y* = 1% 4% SOLOW’ SRAS’ (Pe = 4%) A hurrican is a negative productivity shock and will cause Y* to shift to the left (e.g. to 1%) If total spending doesn’t change, inflation will rise from 2% to 4% We move up the AD curve As inflation rises above expectations people will increase their inflation expectations, causing SRAS to shift up Aside: On p.280-281 Cowen and Tabarrok discuss how the SRAS curve responds to a real shock. They say that if prices are perfectly flexible the SRAS will instantly shift to coincide with the intersection of the Solow curve and AD (point b). But if prices are sticky it will shift beyond the Solow curve (point c). But how do we go from a to c without going through point b? Result: Higher inflation Lower growth
- 14. 5. What is the impact of a reduction in the growth rate of the money supply? 14 P Y SOLOW AD (M+V=10%) 7% Y* = 3% SRAS (Pe = 7%) (M+V=4%) -2% 6% SRAS (Pe = 1%) 1% A B C If prices adjust immediately, the fall in M will cause a corresponding fall in P. But what if prices take time to adjust? Assume (M+V) = 10%, Y* = 3%, thus P = 7%. We assume that M falls by 6%.* The AD curve shifts. Prices aren’t rising as quickly as people expected. And since wages are slower to adjust than revenues this means that profits have fallen. The signal extraction problem causes entrepreneurs to reduce output (A to B). * Technically we should refer to the increase in M as an increase of 5 percentage points, but for simplicity we can write this as 5% If point B coincides with -2% growth this implies inflation of 6%. This isn’t an equilibrium because (i) Y needs to return to Y* at some point; and (ii) at point B people still expect 7% inflation. When people revise their inflation expectations downwards this causes the SRAS to shift down, ultimately to point C. Result: Lower inflation Same growth ultimately, but a temporary recession
- 15. 6. How can monetary or fiscal policy help us avoid a recession? 15 P Y SOLOW AD (M+V=10%) 7% Y* = 3% SRAS (Pe = 7%) (M+V=4%) -2% 6% A B Assume (M+V) = 10%, Y* = 3%, thus P = 7%. We assume that M falls by 6%. The AD curve shifts. If policymakers increase AD they can move us from B back to A, without having to go to point C. Options: 1. Monetary policy • Boost M • Reduce interest rates 2. Fiscal policy • Fiscal stimulus Note that if the fiscal multiplier is <0 a fiscal stimulus would backfire and cause AD to fall even further. In this situation fiscal austerity (i.e. a reduction in G) could lead to an expansionary fiscal contraction.
- 16. The policy increases growth (let’s say from 1% to 2%) but at the cost of higher prices (inflation rises to 8%). At C inflation is 8% but inflation expectations are 4%. When inflation expectations adjust the SRAS curve will shift upwards, ultimately to point D. End result of the 5% increase in AD is a 5% increase in P, taking us from 1% growth and 4% inflation to 1% growth and 9% inflation. Any further increases in AD will be even more inflationary.* The original rate of Y* is unattainable. 7. Why doesn’t monetary or fiscal policy help if the economy suffers a negative productivity shock? 16 P Y SOLOW AD (M+V=5%) 2% Y* = 3% SRAS (Pe = 2%) Y* = 1% 4% SOLOW’ AD’ (M+V=10%) 9% 8% 2% SRAS’ (Pe = 4%) SRAS’’ (Pe = 9%) A B C D Assume (M+V) = 5%, Y* = 3%, thus P = 2%. Point A. Imagine a negative productivity shock causes Y* to fall to 1%. Ultimately we’d expect growth to fall and prices to rise (to 4%). But imagine policymakers attempt to boost AD through monetary or fiscal policy, and successful increase AD to 10%. This doesn’t move us back to A. It moves us along the SRAS curve to point C. * Indeed it is reasonable to think that as P gets higher prices become more flexible money illusion is a lot easier to spot in a hyperinflation. Hence the SRAS shifts even quicker and there is limited scope for even moderate increases in growth.
- 17. Summary of how policy impacts the Dynamic AD-AS model 17 Policymakers Aggregate Demand (M+V) Monetary Fiscal Supply side (Y*)
- 18. Next steps • Test yourself with the following questions from the Market for Managers Problem Set – Available here: http://www.marketsformanagers.com • 8.2, 8.3, 8.4, 8.5, 8.6, 8.9, 9.4 18