Touch screen-technology-1

SEMINAR ON
TOUCH SCREEN TECHNOLOGY
PRESENTED BY:
Uma
II IT(2008-2012)

Abstract:
A touchscreen is a display that can detect the presence and location of a touch within the displa
area, generally refers to touch or contact to the display of the device by a finger or hand.
touchscreen is also an input device. The screens are sensitive to pressure; a user interacts with the
computer by touching pictures or words on the screen,Touchscreens can also sense other passive
objects, such as a stylus, The touchscreen has two main attributes. First, it enables one to interact
with what is displayed directly on the screen, where it is displayed, rather than indirectly with
amouse or touchpad. Secondly, it lets one do so without requiring any intermediate device, again,
such as a stylus that needs to be held in the hand. Such displays can be attached to computers or, as
terminals, to networks. They also play a prominent role in the design of digital appliances such as
the personal digital assistant (PDA),satellite navigation devices, mobile phones, and video games
HISTORY
Touchscreens emerged from corporate research labs in the second half of the 1960s. One of the
first places where they gained some visibility was in the terminal of a computer-assisted learning
terminal that came out in 1972 as part of the PLATO project. They have subsequently become
familiar in kiosk systems, such as in retail and tourist settings, on point of salesystems,
on ATMs and on PDAs where a stylus is sometimes used to manipulate the GUI and to enter data.
The popularity of smart phones, PDAs, portable game consoles and many types of information
appliances is driving the demand for, and the acceptance of, touchscreens.The HP-150 from 1983
was probably the world's earliest commercialtouchscreen computer. It did not actually have a
touchscreen in the strict sense, but a 9" Sony CRT surrounded by infrared transmitters and
receivers which detect the position of any non-transparent object on the screen.
Until the early 1980s, most consumer touchscreens could only sense one point of contact at a time,
and few have had the capability to sense how hard one is touching. This is starting to change with
the commercialisation of multi-touch technology.
Touchscreens are popular in heavy industry and in other situations, such as museum displays
or room automation, where keyboard and mouse systems do not allow a satisfactory, intuitive,
rapid, or accurate interaction by the user with the display's content.

Historically, the touchscreen sensor and its accompanying controller-based firmware have been
made available by a wide array of after-market system integrators and not by display, chip or
motherboard manufacturers. With time, however, display manufacturers and chip manufacturers
worldwide have acknowledged the trend toward acceptance of touchscreens as a highly desirable user
interface component and have begun to integrate touchscreen functionality into the fundamental design of their
products.
Technologies
There are a number of types of touchscreen technology available now
1.Resistive
A resistive touchscreen panel is composed of several layers, the most important of which are two
thin, metallic, electrically conductive layers separated by a narrow gap. When an object, such as a
finger, presses down on a point on the panel's outer surface the two metallic layers become
connected at that point: the panel then behaves as a pair of voltage dividers with connected
outputs. This causes a change in the electrical current which is registered as a touch event and sent
to the controller for processing. In another way The resistive system consists of a normal glass
panel that is covered with a conductive and a resistive metallic layer. These two layers are held
apart by spacers, and a scratch-resistant layer is placed on top of the whole setup. An electrical
current runs through the two layers while the monitor is operational. When a user touches the
screen, the two layers make contact in that exact spot. The change in the electrical field is noted
and the coordinates of the point of contact are calculated by the computer. Once the coordinates
are known, a special driver translates the touch into something that the operating system can
understand, much as a computer mouse driver translates a mouse's movements into a click or a
drag.
2.Surface
Surface acoustic wave (SAW) sumit technology uses ultrasonic waves that pass over the
touchscreen panel. When the panel is touched, a portion of the wave is absorbed. This change in
the ultrasonic waves registers the position of the touch event and sends this information to the

controller for processing. Surface wave touch screen panels can be damaged by outside elements.
Contaminants on the surface can also interfere with the functionality of the touchscreen,an din
surface acoustic wave system, two transducers (one receiving and one sending) are placed along
the x and y axes of the monitor's glass plate. Also placed on the glass are reflectors -- they reflect
an electrical signal sent from one transducer to the other. The receiving transducer is able to tell if
the wave has been disturbed by a touch event at any instant, and can locate it accordingly. The
wave setup has no metallic layers on the screen, allowing for 100-percent light throughput and
perfect image clarity. This makes the surface acoustic wave system best for displaying detailed
graphics (both other systems have significant degradation in clarity).
3.Capacitive
capacitive touchscreen panel consists of an insulator such as glass, coated with a transparent
conductor such as indium tin oxide (ITO).[2][3]As the human body is also a conductor, touching
the surface of the screen results in a distortion of the local electrostatic field, measurable as a
change in capacitance. Different technologies may be used to determine the location of the touch.
The location can be passed to a computer running a software application which will calculate how
the user's touch relates to the computer software. And in capacitive system, a layer that stores
electrical charge is placed on the glass panel of the monitor. When a user touches the monitor with
his or her finger, some of the charge is transferred to the user, so the charge on the capacitive layer
decreases. This decrease is measured in circuits located at each corner of the monitor. The
computer calculates, from the relative differences in charge at each corner, exactly where the touch
event took place and then relays that information to the touch-screen driver software. One
advantage that the capacitive system has over the resistive system is that it transmits almost 90
percent of the light from the monitor, whereas the resistive system only transmits about 75 percent.
This gives the capacitive system a much clearer picture than the resistive system
4.Surface capacitance
In this basic technology, only one side of the insulator is coated with a conductive layer. A small
voltage is applied to the layer, resulting in a uniform electrostatic field. When a conductor, such as
a human finger, touches the uncoated surface, a capacitor is dynamically formed. The sensor's
controller can determine the location of the touch indirectly from the change in the capacitance as

measured from the four corners of the panel. As it has no moving parts, it is moderately durable
but has limited resolution, is prone to false signals from parasitic capacitive coupling, and needs
calibration during manufacture. It is therefore most often used in simple applications such as
industrial controls and kiosks.
5.Projected capacitance
Projected Capacitive Touch (PCT) technology is a capacitive technology which permits more
accurate and flexible operation, by etching the conductive layer. An XY array is formed either by
etching a single layer to form a grid pattern of electrodes, or by etching two separate,
perpendicular layers of conductive material with parallel lines or tracks to form the grid
(comparable to the pixel grid found in many LCDdisplays).
Applying voltage to the array creates a grid of capacitors. Bringing a finger or conductive stylus
close to the surface of the sensor changes the local electrostatic field. The capacitance change at
every individual point on the grid can be measured to accurately determine the touch location.[5]
The use of a grid permits a higher resolution than resistive technology and also allows multi-touch
operation. The greater resolution of PCT allows operation without direct contact, such that the
conducting layers can be coated with further protective insulating layers, and operate even under
screen protectors, or behind weather and vandal-proof glass.
PCT is used in a wide range of applications including point of sale systems, smartphones, and
public information kiosks. Visual Planet's ViP Interactive Foil is an example of a kiosk PCT
product, where a gloved hand can register a touch on a sensor surface through a glass
window.[6]Examples of consumer devices using projected capacitive touchscreens include Apple
Inc.'s iPhone and iPod Touch, HTC's HD2, G1, and HTC Hero, Motorola's Droid, Palm Inc.'s Palm
Pre and Palm Pixi and more recently the LG KM900 Arena, Microsoft's Zune HD, SonyWalkman
X series, Sony Ericsson's Aino and now Vidalco's Edge, D1 and Jewel, and the Nokia X6 phone.
6.Infrared
Conventional optical-touch systems use an array of infrared (IR) light-emitting diodes (LEDs) on
two adjacent bezel edges of a display, with photosensors placed on the two opposite bezel edges to
analyze the system and determine a touch event. The LED and photosensor pairs create a grid of
light beams across the display. An object (such as a finger or pen) that touches the screen

interrupts the light beams, causing a measured decrease in light at the corresponding photosensors.
The measured photosensor outputs can be used to locate a touch-point coordinate.
Widespread adoption of infrared touchscreens has been hampered by two factors: the relatively
high cost of the technology compared to competing touch technologies and the issue of
performance in bright ambient light. This latter problem is a result of background light increasing
the noise floor at the optical sensor, sometimes to such a degree that the touchscreen’s LED light
cannot be detected at all, causing a temporary failure of the touch screen. This is most pronounced
in direct sunlight conditions where the sun has a very high energy distribution in the infrared
region.
However, certain features of infrared touch remain desirable and represent attributes of the ideal
touchscreen, including the option to eliminate the glass or plastic overlay that most other touch
technologies require in front of the display. In many cases, this overlay is coated with an
electrically conducting transparent material such as ITO, which reduces the optical quality of the
display. This advantage of optical touchscreens is extremely important for many device and
display vendors since devices are often sold on the perceived quality of the user display
experience.
Another feature of infrared touch which has been long desired is the digital nature of the sensor
output when compared to many other touch systems that rely on analog-signal processing to
determine a touch position. These competing analog systems normally require continual re-calibration,
have complex signal-processing demands (which adds cost and power consumption),
demonstrate reduced accuracy and precision compared to a digital system, and have longer-term
system-failure modes due to the operating environment.
7.Strain gauge
In a strain gauge configuration, also called force panel technology, the screen is spring-mounted on the four corners
and strain gauges are used to determine deflection when the screen is touched. This technology has been around since
the 1960s but new advances by Vissumo and F-Origin have made the solution commercially viable. It can also
measure the Z-axis and the force of a person's touch. Such screens are typically used in exposed public systems such as
ticket machines due to their resistance to vandalism.

8.Optical imaging
A relatively-modern development in touchscreen technology, two or more image sensors are
placed around the edges (mostly the corners) of the screen. Infrared backlights are placed in the
camera's field of view on the other sides of the screen. A touch shows up as a shadow and each
pair of cameras can then be triangulated to locate the touch or even measure the size of the
touching object (see visual hull). This technology is growing in popularity, due to its scalability,
versatility, and affordability, especially for larger units.
[edit]Dispersive signal technology
Introduced in 2002 by 3M, this system uses sensors to detect the mechanical energy in the glass
that occurs due to a touch. Complex algorithms then interpret this information and provide the
actual location of the touch.[10] The technology claims to be unaffected by dust and other outside
elements, including scratches. Since there is no need for additional elements on screen, it also
claims to provide excellent optical clarity. Also, since mechanical vibrations are used to detect a
touch event, any object can be used to generate these events, including fingers and stylus. A
downside is that after the initial touch the system cannot detect a motionless finger.
Construction
There are several principal ways to build a touchscreen. The key goals are to recognize one or
more fingers touching a display, to interpret the command that this represents, and to communicate
the command to the appropriate application.
In the most popular techniques, the capacitive or resistive approach, there are typically four layers;
1. Top polyester layer coated with a transparent metallic conductive coating on the bottom
2. Adhesive spacer
3. Glass layer coated with a transparent metallic conductive coating on the top
4. Adhesive layer on the backside of the glass for mounting.
When a user touches the surface, the system records the change in the electrical current that flows
through the display.
Dispersive-signal technology which 3M created in 2002, measures the piezoelectric effect — the
voltage generated when mechanical force is applied to a material— that occurs chemically when a
strengthened glass substrate is touched.

There are two infrared-based approaches. In one, an array of sensors detects a finger touching or
almost touching the display, thereby interrupting light beams projected over the screen. In the
other, bottom-mounted infrared cameras record screen touches.
In each case, the system determines the intended command based on the controls showing on the
screen at the time and the location of the touch.
Development
Virtually all of the significant touchscreen technology patents were filed during the 1970s and
1980s and have expired. Touchscreen component manufacturing and product design are no longer
encumbered by royalties or legalities with regard to patents and the manufacturing of touchscreen-enabled
displays on all kinds of devices is widespread.
The development of multipoint touchscreens facilitated the tracking of more than one finger on the
screen, thus operations that require more than one finger are possible. These devices also allow
multiple users to interact with the touchscreen simultaneously.
With the growing acceptance of many kinds of products with an integral touchscreen interface
the marginal cost of touchscreen technology is routinely absorbed into the products that
incorporate it and is effectively eliminated. As typically occurs with any technology, touchscreen
hardware and software has sufficiently matured and been perfected over more than three decades
to the point where its reliability is unassailable. As such, touchscreen displays are found today in
airplanes, automobiles, gaming consoles, machine control systems, appliances and handheld
display devices of every kind. With the influence of the multi-touch-enabled iPhone, the
touchscreen market for mobile devices is projected to produce US$5 billion in 2009.
The ability to accurately point on the screen itself is taking yet another step with the
emerging graphics tablet/screen hybrids.
Ergonomics and usage
Finger stress
An ergonomic problemof touchscreens is their stress on human fingers when used for more than a
few minutes at a time, since significant pressure can be required for certain types of touchscreen.
This can be alleviated for some users with the use of a pen or other device to add leverage and
more accurate pointing. However, the introduction of such items can sometimes be problematic

depending on the desired use case (for example, public kiosks such as ATMs). Also, fine motor
control is better achieved with a stylus, because a finger is a rather broad and ambiguous point of
contact with the screen itself.
Fingernail as stylus
These ergonomic issues of direct touch can be bypassed by using a different technique, provided
that the user's fingernails are either short or sufficiently long Rather than pressing with the soft
skin of an outstretched fingertip, the finger is curled over, so that the top of the forward edge of a
fingernail can be used instead. The thumb is optionally used to provide support for the finger or for
a long fingernail, from underneath. This method does not work on capacitive touch screens, as
fingernails lack the electrical properties required to be sensible by capacitive sensing.
The fingernail's hard, curved surface contacts the touchscreen at a single very small point.
Therefore, much less finger pressure is needed, much greater precision is possible (approaching
that of a stylus, with a little experience), much less skin oil is smeared onto the screen, and the
fingernail can be silently moved across the screen with very little resistance allowing for selecting
text, moving windows, or drawing lines.
The human fingernail consists of keratin which has a hardness and smoothness similar to the tip of
a stylus (and so will not typically scratch a touchscreen). Alternately, very short stylus tips are
available, which slip right onto the end of a finger; this increases visibility of the contact point with
the screen.
Fingerprints
Touchscreens can suffer from the problem of fingerprints on the display. This can be mitigated by
the use of materials with optical coatings designed to reduce the visible effects of fingerprint oils,
such as the oleophobic coating used in the iPhone 3G S, or by reducing skin contact by using a
fingernail or stylus.

Combined with haptics
The user experience with touchscreens without tactile feedback or haptics can be difficult due to
latency or other factors. Research from the University of Glasgow Scotland [Brewster, Chohan,
and Brown 2007] demonstrates that sample users reduce input errors (20%), increase input speed
(20%), and lower their cognitive load (40%) when touchscreens are combined with haptics or
tactile feedback, [vs. non-haptic touchscreens].
"Gorilla Arm"
The Jargon File dictionary of hacker slang defined Gorilla Arm as the failure to understand the
ergonomics of vertically mounted touch screens for prolonged use. The proposition is that human
arm held in an unsupported horizontal position rapidly becomes fatigued and painful, the so-called
"gorilla arm". It is often cited as a prima facie example of what not to do in ergonomics, despite
contrary evidence.] Vertical touchscreens still dominate in applications such as ATMs and data
kiosks in which the usage is too brief to be an ergonomic problem.
Discomfort might be caused by previous poor posture and atrophied muscular systems caused by
limited physical exercise . Fine art painters and draughstmen have worked in similar postures with
vertically mounted surfaces to draw on for millenia

Touch screen-technology-1

More Related Content

What's hot (19)

Viewers also liked (13)

Similar to Touch screen-technology-1 (20)

Recently uploaded (20)

Touch screen-technology-1