Trr ppt
- 2. EFFICIENT LOAD SHARING OF ENERGY DISTRIBUTIONS Guide MR.S.SRIKANTH. M.Tech N.PRASAD (13UG5A0202) G.SOUNDARYA (12UG1A0226) E.MOUNIKA (12UG1A0213) LUTFOR RAHAMAN (11UG1A0211)
- 3. Introduction Here we will be using a current sensor to know the peak loads The main aim of this project of the protect the transformer from peak loads.
- 4. Aim The maim aim of this project is to protect the transformer from failing or damage having applied more loads on it & share these over loads with another transformer.
- 5. Purpose The purpose of the project is to provide a secured environment for the transformers from over loads which are distributing power to certain regions. These transformers with over load are protected by sharing these over loads with another transformer.
- 6. Components Transformers Rectifier Bridge Rectifier Filter IC Regulator PIC Micro Controller Voltage Measurement Current Measurement Relays
- 7. Project working This circuit connected to the microcontroller are using AT89S52 controller By using controller we are continuously monitor the loads this loads shared by transformers This project deal with the energy distribution and current sensing device here controller every time checking the loads If the load is occurred transformer turned on by the controller signals
- 8. Here transformer is interfacing to the controller by using driver circuit Fault conditions are continuously displayed in LCD
- 9. Block Diagram of Efficient load sharing of energy distribution MICRO CONTROLLER POWER SUPPLY LCD DISPLAY Main Transformer (TF1) Sharing transformer (TF2) LOAD RELAY ADC CURRENT SENSOR
- 10. Block Diagram Of Power Supply
- 11. Applications: Industrial areas Used in sub stations Shopping malls
- 12. Advantages By these project transformer is protected by overloads Reliable energy is distributed to consumers Efficient man power is no need
- 13. Conclusion In peak load hours over loads shared by the transformers ,it can be done by using a switch.