Uni fi controller_ug

Enterprise WiFi System
Controller
Release Version: 3.2

i
Table of ContentsUniFi®
Controller User Guide
Ubiquiti Networks, Inc.
Table of Contents
Chapter 1: System Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Network Topology Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hardware Overview and Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Software Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter 2: Using the UniFi Controller Software. . . . . . . . . . . . . . . . . . . . . . 5
Interface Tabs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Common Interface Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 3: Map Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adding Custom Maps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Adding a Google Map. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Placing Access Points on the Map. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setting the Map Scale. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Chapter 4: Statistics Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Clients. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Quick Look. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Current Usage - Top Access Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Recent Activities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Chapter 5: Access Points Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Chapter 6: Users Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Chapter 7: Guests Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Chapter 8: Insight Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Known Wireless Clients. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Rogue Access Points. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Past Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Past Guest Authorizations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Chapter 9: Access Point Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Guests. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

ii
Table of ContentsUniFi®
Chapter 10: User/Guest Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Chapter 11: Hotspot Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Appendix A: Portal Customization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Enabling Portal Customization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Viewing the Default Portal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Appendix B: UniFi Discovery Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Launching the UniFi Discovery Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
UniFi Discovery Utility Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Appendix C: Contact Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Ubiquiti Networks Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

1
Chapter 1: System SetupUniFi®
Chapter 1: System Setup
The UniFi®
Controller is a wireless network management
software solution from Ubiquiti Networks™
. It allows you to
manage multiple wireless networks using a web browser.
This User Guide is for use with version 3.2 or above of the
UniFi Controller software and all of the UniFi Enterprise
WiFi System Access Point models, which this User Guide
will collectively refer to as UniFi AP. Additional information
about the AP models is available on our website at
http://documentation.ubnt.com/UniFi
Model 2.4 GHz 5 GHz
UAP/UAP-LR ✓
UAP-Outdoor/UAP-Outdoor+ ✓
UAP-Outdoor-5G ✓
UAP-AC Outdoor ✓ ✓
UAP-PRO ✓ ✓
UAP-AC ✓ ✓
Additional information about the UniFi Controller is
available on our website at
http://community.ubnt.com/unifi
System Requirements
• Linux, Mac OS X, or Microsoft Windows 7/8
• Java Runtime Environment 1.6 (or above)
• Web Browser: Mozilla Firefox, Google Chrome, or
Microsoft Internet Explorer 8 (or above)
Network Topology Requirements
• A DHCP-enabled network (for the wired Access Point to
obtain an IP address as well as for the wireless Access
Points after the deployment)
• A management station computer running the UniFi
Controller software, located either onsite and connected
to the same Layer-2 network, or off-site in a cloud
or NOC
The Sample Network Diagram above illustrates an example
of a single UniFi network. The router is connected via
Ethernet to a variety of UniFi AP models. There is a wireless
uplink from a wireless UAP‑PRO to a wired UAP-PRO.
Hardware Overview and Installation
The Quick Start Guide that accompanied your UniFi AP
includes a hardware description and instructions for
hardware installation.
UniFi Example Diagram
1 Please refer to “Wireless Uplinks” on page 39 for setting up wireless-linked APs.
2 All UniFi APs support off-site management controllers.
or
On-Site Management
Station
UAP-Outdoor+
UAP-PRO
Wireless Uplink1
UAP-PRO
UAP-AC
UAP-PRO
Router
Off-Site
Cloud/NOC2

2
Software Installation
The UniFi Controller software is installed just once when
you initially create a UniFi network. UniFi APs can be
added at any time through the controller interface but
you do not need to go through the software installation
process every time you add another UniFi AP.
Download the UniFi Controller software from the Ubiquiti
Networks website.
1. Go to downloads.ubnt.com/UniFi.
2. Mac users should download UniFi.pkg, and Windows
users should download UniFi-installer.exe.
3. Follow the instructions for your computer type.
Mac Users
1. Launch UniFi.pkg.
Note: If UniFi.pkg is identified as coming from an
unidentified developer, then do the following:
1. Right-click UniFi.pkg and select Open.
2. Click Open.
3. Click Continue and follow the on-screen instructions to
install the software.
4. Go to Go > Applications and double-click the
UniFi icon.
Proceed to ”Configuring the UniFi Controller Software”
on page 3.
PC Users
1. Launch UniFi-installer.exe.
2. Click Install.
3. If your computer doesn’t have Java 1.6 or above
installed, you will be prompted to install it. Click Install
to continue.
4. Click Next.
5. Ensure that the Start UniFi Controller after installation
option is checked and click Finish.

3
For most versions of Windows, the UniFi Controller
software can also be launched from Start > All Programs.
For Windows 8, the UniFi Controller software can also be
launched from the Start menu.
Configuring the UniFi Controller Software
1. The UniFi Controller software startup will begin. Click
Launch a Browser to Manage Wireless Network.
2. Select your language and country. Alternatively, you
can click restore from a previous backup to use a file that
contains your backup settings. Click Next.
Note: U.S. product versions are locked to the U.S.
Country Code to ensure compliance with FCC
regulations.
3. Select the devices that you want to configure and
click Next.
4. The UniFi Installation Wizard will create a secure
primary wireless network for your devices. Perform the
following steps:
a. Enter the wireless network name or SSID in the Secure
SSID field.
b. Enter a passphrase to be used for your primary network
in the Security Key field.
c. To enable guest access, select Enable Guest Access,
and enter a guest network name in the Guest SSID field.
d. Click Next.
5. Enter an admin name in the Admin Name field and
password in the Password field to use when accessing
the management interface. Confirm your password in
the Confirm field. Click Next.
6. Review your settings. Click Finish to save your settings
or click Back to make changes. Once the wizard
is finished, the browser will be redirected to the
management interface.
Congratulations, your wireless network is now configured.

4
A login screen will appear for the UniFi Controller
management interface. Enter the admin name and
password that you created and click Login.
Proceed to the next chapter for information on using the
UniFi Controller software.

5
Chapter 2: Using the UniFi Controller SoftwareUniFi®
Chapter 2: Using the UniFi
Controller Software
The UniFi Controller software has a browser-based
interface for easy configuration and management.
To access the interface, perform the following steps:
1. Launch the UniFi Controller application if hasn’t already
been started.
• Mac users: Go > Applications > UniFi
• Windows users: Start > All Programs >
Ubiquiti UniFi.
2. The UniFi login screen will appear. Enter the admin
name and password in the appropriate fields and
click Login.
Interface Tabs
The UniFi software consists of six primary tabs. This User
Guide covers each tab with a chapter. For details, on a
specific tab, refer to the appropriate chapter.
• “Map Tab” on page 15
• “Statistics Tab” on page 20
• “Access Points Tab” on page 22
• “Users Tab” on page 25
• “Guests Tab” on page 27
• “Insight Tab” on page 29
Common Interface Options
The common interface options are accessible from all tabs
in the UniFi interface.
Welcome
At the top left of the screen, click Welcome to display the
Change Password and Logout options:
Change Password To change the login name and/or
password, click this option. The Change Password screen
will appear:
• Admin Name Enter the admin name.
• Email Enter the email address of the admin account.
• Password Enter the new password.
• Confirm Enter the new password again.
• Language Select the language of the UniFi Controller.
• Save Click Save to save changes.
• Cancel Click Cancel to discard changes.
Logout To manually log out of the UniFi Configuration
Interface, click this option.

6
Site
The UniFi Controller can manage multiple UniFi networks,
which are called sites. Each site has its own configurations,
maps, statistics, guest portals, and site administrator
accounts. The multiple sites are logically separated, and
the initial site is named default.
Site To create a new site, click the arrow to display the
drop-down menu.
Click Add Site, and the Add Site screen will appear:
• ID Enter a unique name to permanently identify the
site. It will be used in the URL, and if you customize the
portal, it will be used to identify the site folder.
• Name Enter a name that describes the site. It will be
used in the Site drop-down menu.
• Save Click Save to save changes.
APs
• active Click the arrow to display a list of Access
Points that are online.
• inactive Click the arrow to display a list of Access
Points that were previously online but are no longer
accessible.
• pending Click the arrow to display a list of Access
Points that are not yet managed but are available.
Stations
• users Displays the total number of users.
• guests Displays the total number of guests.
Refresh
Click the Refresh icon to update the on-screen
information. Select the refresh interval: Manually, Every
5 seconds, Every 15 seconds, Every 30 seconds, Every
minute, Every 2 minutes (default), or Every 5 minutes.
At the bottom of the screen, there are four tabs:
• Recent Events (see the next column)
• Alerts (see the next column)
• “Settings” on page 7
• “Admin” on page 14
Recent Events
The Recent Events tab displays a list of recent events, along
with the corresponding date, time, and message.
Event Slider Move the slider right and left to navigate
between pages of events.
Search You can enter text that you want to search for.
Simply begin typing; there is no need to press Enter.
You can apply one of the following filters:
• Admin Only display recent events for the administrator.
• AP Only display recent events for the AP.
• All Display all of the recent events.
within Filter recent events based on the time period you
specify. Select 1 hour, 8 hours, 24 hours, 2 days, 7 days,
2 weeks, or 1 month.
Clicking an Event Device Link
The messages have clickable links [blue text in gray
brackets] for AP (see “Access Point Details” on page
32), User, and Guest (see “User/Guest Details” on page
43). Details vary based on the selection.
Alerts
When there is an alert, a red circle will flash on the Alerts
tab. The Alerts tab displays a list of important events, along
with the corresponding date, time, and message.
Alert Slider Move the slider right and left to navigate
between pages of alerts.
Search You can enter text that you want to search for.
Simply begin typing; there is no need to press Enter.
• Unarchived Only display alert messages that have not
been archived.
• All Display all of the alert messages.
Archive All Archive all of the alert messages.
Adopt Adopt an Access Point that is waiting for adoption.
Archive Archive the selected alert message.

7
Clicking an Alert Device Link
The messages have clickable links [blue text in gray
brackets] for AP (see “Access Point Details” on page
32), User, and Guest (see “User/Guest Details” on page
43). Details vary based on the selection.
Settings
The Settings tab displays a list of available sub-tabs:
Site Site-related settings.
Wireless Networks Wireless networks and
group setup, including Zero Handoff Roaming.
Guest Control Guest portal and policies.
User Groups User group settings.
Controller Identity, discovery, and email server
settings.
>_ Site Admins Admin accounts and privileges.
Settings > Site
Configure the site-specific settings. To switch sites, select a
different site from the Site drop-down menu at the top of
any screen.
Site Configurations
Site Name Change the name of the site.
Country Select your country from the drop-down menu.
Automatic Upgrade When enabled, this option will
automatically upgrade your firmware when an update is
available.
LED When enabled, the LED on the Access Point will light
up. When disabled, the LED will turn off.
Uplink Connectivity Monitor It monitors the uplinks of
the managed Access Points, either wired or wireless, by
checking to see if the gateway/custom IP can be reached.
The monitor and wireless uplink capability are enabled by
default.
• Use default gateway Enabled by default. All managed
Access Points will use the gateway of the Access Point
that is providing IP information, either by DHCP or Static
designation.
• Use custom IP Select Use custom IP to specify an
IP address; all managed Access Points will use the IP
address you enter in the Uplink IP address field.
SNMP Select this option to activate the SNMP
(Simple Network Monitor Protocol) agent. SNMP
is an application layer protocol that facilitates the
exchange of management information between
network devices. Network administrators use SNMP
to monitor network‑attached devices for issues that
warrant attention.
• Community String Specify the SNMP community
string. It is required to authenticate access to MIB
(Management Information Base) objects and functions
as an embedded password. The device supports a
read-only community string; authorized management
stations have read access to all the objects in the MIB
except the community strings, but do not have write
access. The device supports SNMP v1. The default
is public.
Remote Logging Enable to define a remote syslog server.
Enter the IP address and port of the syslog server.
Device Password The Device Password protects SSH
access to the UniFi APs. It is randomly generated when you
create a site. All devices in the same site share the same
SSH username and password. You can also make changes:
• Username Enter the new username.
• Password Enter the new password.
Apply Click Apply to save changes.

8
Settings > Wireless Networks
Configure the wireless networks for each site. You can
have up to four wireless network names or SSIDs per
WLAN group.
WLAN Group The Default WLAN group is automatically
created. To create a new WLAN group, click the button.
The Add WLAN Group screen will appear.
• Name Enter a descriptive name for the WLAN group.
• Roaming To enable Zero Handoff Roaming, select the
checkbox.
Note: The UniFi AP-AC does not support Zero
Handoff Roaming for the initial release, but it will
with a future firmware upgrade.
When you enable this option, multiple APs act as an
AP cluster, appearing as a single AP. The wireless client
detects only one AP, so it seamlessly roams from AP to
AP – there is no need to re-negotiate. The APs determine
which AP has the best connection and should serve the
client. They use multicasting to communicate so they
must be wired in the same Layer 2 domain.
Zero Handoff Roaming does not support wireless
uplinks and can only be used on a secured network. It
is also not meant for all scenarios. For example, if there
is too much load or interference, then Zero Handoff
Roaming may not be appropriate for your scenario.
Configure the following options:
-- Radio Select the appropriate radio, 2G or 5G.
-- Channel Select the channel that all of the APs will use
for Zero Handoff Roaming.
-- Create Click Create to save changes.
-- Cancel Click Cancel to discard changes.
For each WLAN group, you have two tabs:
• WLANs (see below)
• “Options” on page 9
Select the appropriate WLAN group from the WLAN Group
drop-down menu.
WLANs
Name Displays the wireless network name or SSID.
Security Displays the type of security being used on your
wireless network.
Guest Network Indicates whether or not the network is a
guest network.
Actions Click a button to perform the desired action:
• Edit Make changes to the wireless network settings. Go
to the Create or Edit a Wireless Network section below.
• Delete Delete the wireless network.
Create Add a wireless network. Go to the Create or Edit a
Wireless Network section below.
Create or Edit a Wireless Network
• Name/SSID Enter or edit the wireless network name
or SSID.
• Enabled Select the checkbox to enable the wireless
network.
• Security Select the type of security to use on your
wireless network.
-- Open This option is typically only used on the guest
network. When enabled, wireless network access is
open to anyone without requiring a password.

9
-- WEP WEP (Wired Equivalent Privacy) is the oldest
and least secure security algorithm. WPA™
security
methods should be used when possible.
• WEP Key Enter a WEP encryption key in
hexadecimal format. You can enter a 64-bit or
128‑bit key:
Type Hex
64-bit 10 Hexadecimal Characters
(0-9, A-F, or a-f)
Example: 00112233AA
Note: You can use 5 printable characters,
which will be translated to the
corresponding HEX code.
128-bit 26 Hexadecimal Characters
(0-9, A-F, or a-f)
Example:
00112233445566778899AABBCC
Note: You can use 13 printable
characters, which will be translated to the
corresponding HEX code.
• Key Index Specify which Index of the WEP Key
to use. Four different WEP keys can be configured
at the same time, but only one is used. Select the
effective key: 1, 2, 3, or 4.
-- WPA-Personal WPA or Wi-Fi Protected Access was
developed as an encryption method stronger than
WEP. WPA-Personal requires a passphrase to connect
to the wireless network.
• Security Key Enter the passphrase that users will
use to connect to the wireless network.
-- WPA-Enterprise WPA Enterprise uses a RADIUS
server to authenticate users on the wireless network.
• IP Address Specify the IP address of the RADIUS
server.
• Port Enter the port number. The default is 1812.
• Password Enter the password used to authenticate
on the RADIUS server.
• Guest Policy Select this option to enable guest access
policies on this wireless network.
Advanced
• VLAN To use a VLAN, select Use VLAN ID and enter the
port number.
• Hide SSID Select this option if you don’t want the
wireless network name or SSID to be broadcast.
• WPA Select the appropriate WPA and encryption
methods:
-- WPA Mode Select Both, WPA1 Only, or WPA2 Only.
-- Encryption Select Auto, TKIP Only, or
AES/CCMP Only.
• User Group Assign wireless users to a specific user
group. For more information about user groups, see
“Settings > User Groups” on page 13.
Click Create to create a new wireless network, or click
Apply to save changes. Click Cancel to discard changes.
Options
Options vary depending on whether or not your WLAN
group uses Zero Handoff Roaming.
Note: The UniFi AP-AC does not support Zero
Handoff Roaming for the initial release, but it will
with a future firmware upgrade.
No Zero Handoff
Name You can change the name of your WLAN group.
Load Balancing Select this option to balance the number
of clients you specify per radio.
Note: The UniFi AP-AC does not support Load
Balancing for the initial release, but it will with a
future firmware upgrade.
Legacy Support By default, legacy devices, such as
802.11b devices, are excluded. Select this option if you
want to support legacy devices.
Zero Handoff
Name You can change the name of your WLAN group.
Radio Select the appropriate radio, 2G or 5G.
Channel Select the channel that all of the APs will use for
Zero Handoff Roaming.

10
Settings > Guest Control
The Guest Control screen displays the following sections:
• Guest Policies (see below)
• “Hotspot” on page 11 (for Hotspot authentication)
• “Access Control” on page 12
Guest Policies
Guest Portal Disabled by default. When disabled, guests
can access the Internet without entering a password or
accepting the Terms of Use. When this option is enabled,
you can control the Guest Portal.
Authentication When the Guest Portal is enabled, the
authentication options will appear:
• No Authentication (see below)
• Simple Password (see the next column)
• “Authentication > Hotspot” on page 11
• “Authentication > External Portal Server” on page 12
Authentication > No Authentication
Select this option if guests are not required to log in, but
must accept the Terms of Use. You must also select Guest
Policy under Settings > Wireless Networks > wireless_
network_name > Edit > Wireless Configurations in order to
enforce selection of the Terms of Use by the guest. See
“Guest Policy” on page 9 for more information.
Expiration Specify the guest login expiration after a
designated period of time: 8 hours, 24 hours, 2 days, 3 days,
4 days, 7 days, or User‑defined, which can be designated in
minutes, hours, and days.
Landing Page After accepting the Terms of Use, guests
are redirected to the landing page. Select one of the
following options:
• Redirect to the original URL After accepting the Terms
of Use, guests are directed to the URL they requested.
• Promotional URL After accepting the Terms of Use,
guests are redirected to the URL that you specify. Ensure
that the URL begins with http://
(example: http://www.ubnt.com).
Portal Customization Select this option to have
customized portal pages appear in place of the default
login pages. See “Portal Customization” on page 48
for details on setting up custom portal pages.
Portal URL Hostname Enter a hostname for the portal
URL in place of the default IP address. Paired with an SSL
certificate, this ensures that site certificates are displayed
as trusted in the guest browser. Example: www.ubnt.com
When logging in with No authentication, guests will be
required to accept the Terms of Use before gaining access
to the Internet.
Authentication > Simple Password
Select this option if guests are required to enter a simple
password and accept the Terms of Use. When you select
Simple Password, you must select Guest Policy under
Settings > Wireless Networks > wireless_network_name >
Edit > Wireless Configurations in order to enforce password
entry and selection of the Terms of Use by the guest. See
“Guest Policy” on page 9 for more information.
Guest Password Enter a password that guests must enter
before accepting the Terms of Use and connecting to the
Internet.
Expiration Specify the guest login expiration after a
designated period of time: 8 hours, 24 hours, 2 days, 3 days,
4 days, 7 days, or User‑defined, which can be designated in
minutes, hours, and days.
following options:

11
When logging in with Simple Password authentication,
guests will be required to enter the Guest Password and
accept the Terms of Use before gaining access to the
Internet.
Authentication > Hotspot
Select this option to enable Hotspot functionality,
including the ability to customize portal login pages and
bill customers using major credit cards or other supported
methods. You must also select Guest Policy under Settings
> Wireless Networks > wireless_network_name > Edit >
Wireless Configurations in order to enforce voucher entry,
payment, and selection of the Terms of Use by the guest.
See “Guest Policy” on page 9 for more information.
following options:
Hotspot
When Hotspot authentication is selected, the Hotspot
section is displayed.
Select the Voucher or Payment method of authorization:
• Voucher Use Hotspot Manager to create vouchers
(including distributable code, duration values, and use
restrictions). See “Hotspot Manager” on page 45.
• Payment Set up payment-based authentication. If you
select this option, then the Gateway option will appear.
• Gateway (Available only for payment-based
authentication.) You have multiple options:
-- PayPal™
(US, Canada, UK) Use your PayPal Website
Payments Pro account. To manage payments and
transactions, use Hotspot Manager and see “Hotspot
Manager” on page 45.
Enter the PayPal account details:
• Username Enter the corresponding Username.
• Password Enter the corresponding Password.
• Signature Enter the corresponding Signature for
the PayPal account that will receive payments.
• Use Paypal Sandbox For PayPal testing purposes,
select this option. Then click Apply Sandbox
Account to set up or access your PayPal Sandbox
Test Environment.
-- Stripe (US, Canada) Use your Stripe account. To
manage payments and transactions, use Hotspot
Manager and see “Hotspot Manager” on page 45.
Enter the Stripe account detail:
• API Key Enter the live secret API key.
Note: We recommend that you perform a test
transaction with the test secret API key first before
using the live secret API key.

12
-- Quickpay (Europe) Use your Quickpay account.
To manage payments and transactions, use Hotspot
Manager and see “Hotspot Manager” on page 45.
Enter the QuickPay account details:
• Merchant ID Enter the ID for your account.
• MD5 Secret Enter the MD5 secret key.
-- Authorize.Net®
(US, Canada) Use your Authorize.Net
account. To manage payments and transactions, use
Hotspot Manager and see “Hotspot Manager” on page
45.
Enter the Authorize.Net account details:
• API Login ID Enter the API login ID used to identify
yourself as an authorized user.
• Transaction Key Enter the key used to authenticate
transactions.
• Use Test Account For Authorize.Net testing
purposes, select this option. Then click Apply Test
Account to set up or access your Authorize.Net
test account.
-- Merchant Warrior (Australia, New Zealand) Use
your Merchant Warrior account. To manage
payments and transactions, use Hotspot Manager and
see “Hotspot Manager” on page 45.
Enter the Merchant Warrior account details:
• Merchant UUID Enter the ID for your account.
• API Key Enter the API key.
• API Passphrase Enter the API passphrase.
• Use Test Account For Merchant Warrior testing
purposes, select this option. Then click Apply
Account to set up or access your Merchant Warrior
test account.
• Hotspot Operator Click Go to Hotspot Manager
to manage Wireless Guests, Payments/Transactions,
Vouchers, and Operator Accounts. See “Hotspot
Manager” on page 45.
When logging in with voucher-based Hotspot
authentication, guests will be required to enter the
voucher number and accept the Terms of Use before
gaining access to the Internet.
When logging in with payment-based Hotspot
authentication, guests will be required to select the
package type, click the payment choice, and accept the
Terms of Use before gaining access to the Internet.
Authentication > External Portal Server
Select this option if you are using an external server to
host a custom guest portal.
Custom Portal Enter the IP address in the IP Address field
using the following format: 192.168.0.0.
Access Control
Restricted Subnets Enter any subnets that you don’t
want guests to be able to access.
Allowed Subnets Enter any subnets that you want guests
to be able to access.

13
Settings > User Groups
Configure user groups on this screen. The default user
group is named Default and has no bandwidth limits.
User Group Settings
Name Displays the name of the user group.
Bandwidth Limit Displays the upload and download
limits.
• Edit Make changes to the user group settings. Go to the
Create or Edit a User Group section below.
• Delete Delete the user group. (The Default user group
cannot be deleted.)
Create Create a new user group. Go to the Create or Edit a
User Group section below.
Create or Edit a User Group
• Name Enter or edit the name of the user group.
• Bandwidth Limit (Download) Select to limit the
download bandwidth. Enter the maximum in Kbps.
• Bandwidth Limit (Upload) Select to limit the upload
bandwidth. Enter the maximum in Kbps.
• Create Click Create to create a new user group.
• Apply Click Apply to save changes.
See “Configuration” on page 44 for information on
how to assign a user or guest to a user group.
Settings > Controller
Configure the system settings of the UniFi Controller.
UniFi Controller
Controller Hostname/IP Enter the hostname or IP
address of the UniFi Controller.
Note: When alert emails are sent out, the Controller
Hostname/IP will be specified in the Controller URL at
the bottom of every message.
Network Discovery When enabled, this option allows
UniFi to be discoverable via UPnP. This option is disabled
by default.
Mail Server
When enabled, UniFi will send email alerts triggered by
Pending Access Points and Disconnected Access Points.
Specify the administrator email address when you create
an account under Settings > Site Admins.
SMTP Server Select this option to enable emails.
• Enable Mail Server Enter the outgoing (SMTP) mail
server name.
• Port The default is 25. If Secure Sockets Layer (SSL)
is enabled, then the port number will automatically
change to 465.
• Enable SSL You can enable SSL to enhance secure
communications over the Internet.
• Enable Auth. Select this option to enable
authentication.
-- username Enter the username required by the
mail server.
-- password Enter the password required by the
mail server.
• Specify sender address Select this option to specify
the sender email address. Enter the email address that
will appear as the sender of the email alert.
• Test SMTP Server Enter an email address and click
Send to test the mail server setup.

14
Settings > Site Admins
You can create administrator accounts that are
site‑specific; these site administrators can only see the
sites they manage.
The superadmin account is created during the Setup
Wizard and has global admin (read/write) access; this
superadmin account cannot be revoked or re-invited.
The list of administrator accounts also includes the
operator accounts created in Hotspot Manager; see
“Operator Accounts” on page 47.
Name Displays the name of the administrator.
Email Displays the email address of the administrator.
Role Displays the permissions level: admin (read/write
access), read‑only, or hotspot (operator read-only access).
• Revoke Remove the selected account.
• Re-invite (Not applicable to superadmin or operator
accounts.) Send another email invitation.
Invite Click to add a new site administrator.
• Email Enter the email address of the new administrator.
• Admin Name Enter the name of the new administrator.
• Role Select Administrator (read/write access) or User
(read-only access).
• Invite Click Invite to send an email invitation.
Admin
The Admin tab displays server version information,
allows system backups to be created and downloaded,
allows system restoration from backup files, and allows
configuration information to be downloaded to assist in
support issues.
Server Information
Version Displays the software version. If there is an
update, UniFi will automatically download it and display it.
Backup
Historical Data Retention Select the time duration
of the backup: 1 week, 1 month, 2 months, 3 months,
6 months, 1 year, or Everything. The default is 1 week.
Download Click Download Backup Settings to
download a file that contains all of your settings so you
can restore them later if you choose.
Restore
Choose File Select this option to restore settings from a
backup file that you’ve already downloaded.
Support Info
Debug Log You can customize the support information
that is collected:
• device Select the level of severity required to trigger
device log entries. The default is Normal.
• mgmt Select the level of severity required to trigger
management log entries. The default is Normal.
• system Select the level of severity required to trigger
system log entries. The default is Normal.
• apply Click apply to save changes.
Download Select this option to download a file to your
computer with information about your configuration. You
can email this file to our support team.

15
Chapter 3: Map TabUniFi®
Chapter 3: Map Tab
The UniFi Controller software allows you to upload custom
map images of your location(s) or use Google Maps™
for a
visual representation of your wireless network. When you
initially launch the UniFi Controller application, a default
map is displayed. The legend at the bottom of the map
shows the scale of the map.
Adding Custom Maps
To add a custom map, you must first create the image
using an illustration, image editing, or blueprint
application that exports a file in .jpg, .gif, or .png
file format.
Once you’ve created the map, you can upload it to the
UniFi Controller software by performing the following
steps:
1. Click Configure Maps.
Configure Maps button

16
2. Click Add a Map.
Add a Map
3. Enter a map name in the Description field and click
Upload my own. Click the Browse button to locate the
file to use as a map (valid file formats are .jpg, .gif, and
.png). Click Continue.
4. Click Close.
Adding a Google Map
To add a Google Map to the UniFi Controller software
Map view:
1. Click Configure Maps.
Configure Maps button
2. Click Add a Map.
Add a Map
3. Enter a map name in the Description field and click Use
Google Maps. Click Continue.

17
4. The default view is Map, which looks like a street map.
Use the tools on the left to navigate the map or zoom
in/out.
In the Search field, you can enter an address or the
latitude and longitude of a specific location. Then press
the return or enter key.
You can also click Satellite for a satellite view, as seen
from above.
Click Take Snapshot to capture a screenshot.
5. Click Close.
You can adjust the zoom using the slider on the right.
Placing Access Points on the Map
Drag the Access Point / / icon(s) from the Unplaced
APs list on the left to the appropriate location(s) on
the map.
The Access Point will appear in the area that you placed it.

18
Wired/Wireless Access Point Each icon
indicates the location of the Access Point on the
map. Click and hold this icon to drag the Access
Point to another location on the map. Click an
Access Point icon to reveal additional options.
Click a blank area of the map to hide the icons.
Note: Not all icons are shown here.
Lock Lock the selected Access Point to the
current location on the map.
Details Display the Details screen so you can
view and edit the Access Point configuration.
You can also view the lists of connected users
and guests. For more information, go to “Access
Point Details” on page 32.
Remove Remove the Access Point from its
location on the map.
Show: Click any of the following options to display Access
Point labels, details, wireless coverage, and topology on
the map.
• Labels Displays the name applied to the Access Point.
Refer to Alias under “Configuration” on page 36 to
change a name applied to an Access Point. If no custom
label is applied, the Access Point’s MAC address will be
displayed.
• Details Displays the Access Point name, MAC address,
transmit/receive channel, number of users connected,
and number of guests connected.
• Coverage Displays a visual representation of the
wireless range covered by the Access Point.

19
Topology Displays a visual representation of the network
configuration and connections between Access Points.
Any device that is wirelessly connected will have a wireless
icon next to it. A path of arrows will indicate the wireless
Access Point and its uplink to a wired Access Point.
Map: If multiple maps have been uploaded, you can
select which map you want to view using this option.
Configure Maps Use this option to add maps or edit the
current map(s).
Set Map Scale Use this option to define the scale of the
map. You will draw a line and define the distance that the
line represents.
Zoom Slider Use to zoom the map detail in and out.
Setting the Map Scale
1. Click the Set Map Scale button.
2. Click and hold to draw a line in the area that you want
to use to set the scale of the map. If you need to redraw
the line, just click and hold again to draw a new line.
Once you’re happy with the line, click Next.
3. Enter the distance that the line represents in the
Distance: field. The distance is specified in meters by
default but you can switch to feet using the drop-down
menu on the right. Click Next.
The legend at the bottom of the map shows the new scale
of the map.

20
Chapter 4: Statistics TabUniFi®
Chapter 4: Statistics Tab
The Statistics tab provides a visual representation of the
network traffic connected to your managed APs. Charts
representing the number of clients and network traffic. An
hour-by-hour chart of the usage over the last 24 hours is
also displayed on this screen.
Date At the top right of the screen, you can filter the
statistics by date and time period. You can also change the
duration interval by toggling between 24h (24 hours) and
30d (30 days).
Clients
# of Clients A visual pie chart represents the client
distribution amongst the APs. Place the mouse cursor over
the chart for percentage details.

21
Chapter 4: Statistics TabUniFi®
Quick Look
Most Active AP
The details of the most active Access Point are displayed:
Name or MAC address You can click this link to open the
AP Details screen. See “Access Point Details” on page
32 for additional information.
Download Displays the total amount of data downloaded
by the AP.
Upload Displays the total amount of data uploaded by
the AP.
Most Active Client
The details of the most active client in current use are
displayed:
User/Guest Details screen. See “User/Guest Details” on
page 43 for additional information.
by the client.
the client.
All-Time Top Client
The details of the all-time, most active client are displayed:
User/Guest Details screen. See “User/Guest Details” on
page 43 for additional information.
by the client.
the client.
Current Usage - Top Access Points
The details of the most active Access Points in current use
are displayed.
# of Clients A pie chart represents the client distribution
on the most active Access Points. Place the mouse cursor
over the chart for percentage details.
Traffic A pie chart represents traffic on the most active
Access Points. Place the mouse cursor over the chart for
percentage details.
Clear current stats Reset the current statistics to
start over.
Recent Activities
The details of recent network activities are displayed.
# of Clients A graph displays the number of clients
connected during the selected time period. Place the
mouse cursor over a point to display the exact number.
Traffic A graph displays the network traffic during the
selected time period. Place the mouse cursor over a point
to display the specific amount of data.

22
Chapter 5: Access Points TabUniFi®
Chapter 5: Access Points Tab
The Access Points tab displays a list of managed Access
Points. Three sub-tabs display different status information:
• Overview Displays the number of clients, amount
of data downloaded, amount of data uploaded, and
channel setting.
• Config Displays the WLAN and radio settings for the
2.4 GHz and 5 GHz radio bands.
• Performance Displays the number of 2.4 GHz and
5 GHz clients, overall transmit rate, overall receive rate,
transmit rates in the 2.4 GHz and 5 GHz radio bands, and
channel setting.
These sub-tabs share common options:
Search Enter the text you want to search for. Simply
begin typing; there is no need to press Enter.
Page Size Select how many results are displayed per
page: 10, 20, 30, 40, 60, or 100.
Rolling upgrade Click to begin automatically upgrading
Access Points, one by one, except for wirelessly uplinked
Access Points, which are intentionally excluded from
upgrading.
On any sub-tab, you can click any of the column headers
to change the list order.
Overview
Icon Displays the icon of the Access Point is displayed (the
icon will vary depending on the model).
Name/MAC Address Displays the hostname, alias, or
MAC address of the Access Point. You can click the name
to get additional details on the Access Point.
IP Address Displays the IP address of the Access Point.

23
Status Displays the connection status.
• Connected The Access Point is physically wired to
the network.
• Connected (wireless) The Access Point is wirelessly
uplinked to a physically wired Access Point.
• Disconnected The Access Point is unreachable by the
UniFi Controller software. Disconnected Access Points
will also appear under Access Points > Disconnected at
the top of the interface.
• Isolated A managed Access Point is unable to locate
its uplink.
• Managed by Other The Access Point is not in the
default state but it is not controlled by the UniFi
Controller.
• Pending Approval The Access Point is in the default
state and is available for adoption.
Num Clients Displays the number of clients connected to
the Access Point.
by the Access Point.
the Access Point.
Channel Displays the transmit/receive channel being
used by the Access Point. The radio band is represented as
(ng) for 2.4 GHz and (na) for 5 GHz.
• Restart Restart the selected Access Point.
• Locate Locate the Access Point on the map. The button
will flash green until the Locate button is clicked again.
The LED on the Access Point will flash so that you can
place it in the correct location on the map. The LED will
flash until the Locate button is clicked again.
• Adopt Adopt an Access Point that appears under
Access Points > Pending at the top of the interface. The
Status will appear as Adopting until the Access Point is
connected.
• Upgrade If a software upgrade is available for the
Access Point, click Upgrade to install the latest UniFi
firmware on the device. The Status will appear as
Upgrading until the process is complete and the Access
Points reconnects to the UniFi Controller software.
Config
Model Displays the model number of the Access Point.
• Connected The Access Point is physically wired to
the network.
its uplink.
Controller.
WLAN 2G Displays the name of the WLAN group using
the 2.4 GHz radio band.
WLAN 5G Displays the name of the WLAN group using
the 5 GHz radio band.
Radio 2G Displays the channel and TX power settings
used in the 2.4 GHz radio band.
Radio 5G Displays the channel and TX power settings
used in the 5 GHz radio band.
• Restart Restart the selected Access Point.
• Locate Locate the Access Point on the map. The button
will flash green until the Locate button is clicked again.
The LED on the Access Point will flash so that you can
place it in the correct location on the map. The LED will
flash until the Locate button is clicked again.

24
• Adopt Adopt an Access Point that appears under
Access Points > Pending at the top of the interface. The
Status will appear as Adopting until the Access Point is
connected.
• Upgrade If a software upgrade is available for the
Access Point, click Upgrade to install the latest UniFi
firmware on the device. The Status will appear as
Upgrading until the process is complete and the Access
Points reconnects to the UniFi Controller software.
Performance
• Connected The Access Point is physically wired to the
network.
its uplink.
Controller.
2G Clients Displays the number of clients connected to
the Access Point using the 2.4 GHz band.
5G Clients Displays the number of clients connected to
the Access Point using the 5 GHz band.
TX Displays the overall TX (transmit) rate.
RX Displays the overall RX (receive) rate.
TX 2G Displays the overall TX rate for the 2.4 GHz radio
band. The different colors represent different types of
packet activity:
Color Packet Activity
Packets sent
Packets retried
Packets not sent due to likely interference
TX 5G Displays the overall TX rate for the 5 GHz radio
band. The different colors represent different types of
packet activity:
Color Packet Activity
Packets sent
Packets retried
Packets not sent due to likely interference
Channel Displays the transmit/receive channel being
used by the Access Point. The radio band is represented as
(ng) for 2.4 GHz and (na) for 5 GHz.

25
Chapter 6: Users TabUniFi®
Chapter 6: Users Tab
The Users tab displays a list of users that are connected
to the primary wireless network(s) of an Access Point.
You can click any of the column headers to change the
list order.
• 2G Only display users of the 2.4 GHz wireless network.
• 5G Only display users of the 5 GHz wireless network.
• All Display all users.
Filter by AP Drop-down menu of all available Access
Points. Select one to filter the results and only display
users connected to the selected Access Point.
page: 10, 20, 30, 40, 60, or 100.
MAC address of the connected user. You can click the
name to get additional details.
IP Address Displays the IP address of the connected user.
WLAN Displays the network name or SSID of the wireless
network in use.
Access Point Displays the hostname, alias, or MAC
address of the Access Point. You can click the name to get
additional details on the Access Point.

26
Chapter 6: Users TabUniFi®
Signal Displays the percentage of signal strength and
type of signal in use. The leaf symbol indicates power save
mode. The device will return to active mode when Down
or Up activity resumes.
Icon Clients Mode
ac 5 GHz (802.11ac) Active
ac
5 GHz (802.11ac) Power Save
a 5 GHz (802.11a) Active
a
5 GHz (802.11a) Power Save
n 5 GHz (802.11n) Active
n
5 GHz (802.11n) Power Save
n 2.4 GHz (802.11n) Active
n
2.4 GHz (802.11n) Power Save
g 2.4 GHz (802.11g) Active
g
2.4 GHz (802.11g) Power Save
b 2.4 GHz (802.11b) Active
b
2.4 GHz (802.11b) Power Save
Down Displays the total amount of data downloaded by
the user.
Up Displays the total amount of data uploaded by
the user.
Activity Displays the level of activity for each user.
Bars Activity Level
(Bytes per second)
Idle
500
8000
64000
512000
2048000
Uptime Displays the amount of time the user has been
connected for this session.
• Block Block this user from accessing the Access Point
and add the client device to the Blocked Device list.
• Reconnect Reconnect this user to the Access Point and
remove the client device from the Blocked Device list.

27
Chapter 7: Guests TabUniFi®
Chapter 7: Guests Tab
The Guests tab displays a list of guests that are connected
to the guest network(s) of an Access Point. You can click
any of the column headers to change the list order.
• 2G Only display guests of the 2.4 GHz wireless network.
• 5G Only display guests of the 5 GHz wireless network.
• All Display all guests.
Filter by AP Drop-down menu of all available Access
Points. Select one to filter the results and only display
guests connected to the selected Access Point.
page: 10, 20, 30, 40, 60, or 100.
MAC address of the connected guest. You can click the
Status Indicates whether the guest is authorized or
not. For authorization, guests must accept the Terms
of Use if the guest portal is enabled and authenticate if
authentication is enabled.
IP Address Displays the IP address of the connected
guest.
Access Point Displays the hostname, alias, or MAC
address of the Access Point. You can click the name to get

28
Chapter 7: Guests TabUniFi®
Signal Displays the percentage of signal strength and
type of signal in use. The leaf symbol indicates power save
mode. The device will return to active mode when Down
or Up activity resumes.
Icon Clients Mode
ac 5 GHz (802.11ac) Active
ac
5 GHz (802.11ac) Power Save
a 5 GHz (802.11a) Active
a
5 GHz (802.11a) Power Save
n 5 GHz (802.11n) Active
n
5 GHz (802.11n) Power Save
n 2.4 GHz (802.11n) Active
n
2.4 GHz (802.11n) Power Save
g 2.4 GHz (802.11g) Active
g
2.4 GHz (802.11g) Power Save
b 2.4 GHz (802.11b) Active
b
2.4 GHz (802.11b) Power Save
the guest.
the guest.
Activity Displays the level of activity for each guest.
Bars Activity Level
(Bytes per second)
Idle
500
8000
64000
512000
2048000
Uptime Displays the amount of time the guest has been
connected for this session.
• Block Block this guest from accessing the Access Point.
• Reconnect Reconnect this guest to the Access Point.
• Authorize Manually grant authorization when a guest
is in a pending state.
• Unauthorize Remove authorization of wireless guest
access and disconnect the client.

29
Chapter 8: Insight TabUniFi®
Chapter 8: Insight Tab
The Insight tab displays different kinds of status
information. Four sub-tabs are available:
• Known Wireless Clients Displays information about
detected wireless clients.
• Rogue Access Points Displays information about APs
not managed by the UniFi Controller.
• Past Connections Displays information about previous
client connection sessions (for example, a client can
have multiple sessions from different days).
• Past Guest Authorizations Displays information about
the authorization of previous guest connections.
These sub-tabs share common options:
page: 10, 20, 30, 40, 60, or 100.
On any sub-tab, you can click any of the column headers
to change the list order.
Known Wireless Clients
Slider Move the slider right and left to navigate between
pages of clients.
You can apply one of the following primary filters:
• Blocked Only display blocked clients.
• Noted Only display clients whose configurations
include notes or who are forced to connect to a specific
Access Point. (See “Configuration” on page 44 for
more information.)
• User Only display users.
• Guest Only display guests.
• All Display all users and guests.

30
For the User, Guest, and All filters, a secondary filter is
available:
• Offline Only Only display clients who are currently
offline.
• All Display all clients, regardless of connection status.
Last Seen Filter the results on the page based on the
time the client was last seen. Select 1 day, 3 days, 7 days,
2 weeks, 1 month, 2 months, or 1 year.
MAC address of the connected client. You can click the
User/Guest Indicates whether the client is/was
connected to a primary or guest network.
the client.
the client.
Last Seen Displays the last date and time the client was
connected.
• Block Block this client from accessing the Access Point.
After you have blocked a client, you can click unblock to
allow access.
Rogue Access Points
Slider Move the slider right and left to navigate between
pages of APs.
Last Seen Filter the results on the page based on the
time the AP was last seen. Select 1 day, 3 days, 7 days,
2 weeks, 1 month, 2 months, or 1 year.
Name/SSID Displays the name of the wireless network.
BSSID Displays the MAC address of the AP’s wireless
interface.
Channel Displays the channel setting that the AP was
detected on.
Type Displays the security status indicating whether
encryption is used.
Manufacturer Displays the name of the AP manufacturer.
Location Displays the name of the closest Access
Point managed by UniFi. You can click the name to get
Last Seen Displays the last date and time the AP was
connected.
Past Connections
• User Only display users.
• Guest Only display guests.
• All Display all users and guests.
Date Filter by date and time period.
MAC address of the connected client. You can click the
User/Guest Indicates whether the client is/was
connected to a primary or guest network.
Associated Displays the date and time the client first
connected.
Duration Displays the length of time the client was
connected.
the client.
the client.
IP Displays the last known IP address of the client.
Last AP Displays the name or MAC address of the last
Access Point used by the guest. You can click the name to
get additional details on the Access Point.

31
Past Guest Authorizations
Date Filter by date.
MAC address of the previous guest.
Package Displays the name of the guest access package.
Amount Displays the amount paid by the guest.
Authorized By Displays the name of the authorizing
body.
Start Displays the start date and time of guest access.
Duration Displays the length of time the guest was
connected.
the guest.
the guest.
IP Displays the last known IP address of the guest.
Last AP Displays the name or MAC address of the last
Access Point used by the guest. You can click the name to
get additional details on the Access Point.

32
Chapter 9: Access Point DetailsUniFi®
Chapter 9: Access Point
Details
UniFi Access Points connect to the UniFi Controller
software either by Ethernet, indicated as Connected, or by
a wireless connection, indicated as Connected (wireless).
Based on connection type, options under each tab vary.
Note: The UniFi AP-AC and AP-AC Outdoor do not
support wireless uplinks for the initial release, but
they will with a future firmware upgrade.
The upper part of the window has four clickable tabs:
• Details (see below)
• “Users” on page 35
• “Guests” on page 35
• “Configuration” on page 36
The bottom of the window has two buttons:
• Locate Use the Locate button to flash the LED on the
Access Point and flash the Access Point icon on the map.
• Restart Use the Restart button to restart the
Access Point.
Note: The UAP-AC, UAP-PRO, and UAP models are
shown in this chapter; however, this information also
applies to the other UniFi AP models.
Details
Details about the Access Point. Click Overview to display
the device specifics, connection details, uptime, and user
statistics.
Overview
MAC Address Displays the MAC address of the
Access Point.
Model Displays the model number.
Version Displays the version of software used on the
Access Point.
Uptime Displays the amount of time the Access Point has
been running without interruption.
# Users Displays the number of users connected to the
primary network.
# Guests Displays the number of users connected to the
guest network.
Uplink (Wireless)
Click Uplink (Wireless) to display details about the
wireless uplink. See “Wireless Uplinks” on page 39 to
find, select, and connect to a wireless Access Point.
Uplink AP Displays the name or MAC address of the
Uplink Access Point.
Signal Displays the percentage of signal strength
between the two APs.
TX Rate Displays the TX (transmit) rate.
RX Rate Displays the RX (receive) rate.
Down Pkts/Bytes Displays the amount of data
downloaded as packets and bytes.
Up Pkts/Bytes Displays the amount of data uploaded as
packets and bytes.
Activity Displays the level of activity in Bytes per second.

33
Uplink (Wire)
Click Uplink (Wire) to display details about the wired
uplink.
Speed Displays the connection speed in Mbps.
Duplex Displays the mode, Full Duplex or Half Duplex.
Down Pkts/Bytes Displays the amount of data
downloaded as packets and bytes.
Up Pkts/Bytes Displays the amount of data uploaded as
packets and bytes.
Downlinks
The wireless Access Points currently connected to the
wired Access Point are displayed.
Note: Downlinks will only be visible under the Details
tab when a wireless Access Point is connected.
AP Displays the name, alias, or MAC address of the
Downlink Access Point.
between the two APs.
• Remove Remove the wireless Access Point from the
wired Access Point.

34
Radio 2G (11n/b/g) or Radio 5G (11n/a)
Click Radio 2G (11n/b/g) or Radio 5G (11n/a) to display
the channel and transmit/receive statistics.
Channel Displays the wireless channel in use.
Transmit Power Displays the EIRP in dBm.
Note: If the device has an external antenna, you can
place the mouse over the icon for additional details.
TX Pkts / Bytes Displays the amount of data transmitted
by the Access Point as packets and bytes.
RX Pkts / Bytes Displays the amount of data received by
the Access Point as packets and bytes.
TX Retry / Dropped Displays the percentage of
transmitted packets that needed to be resent and the
percentage of packets that were dropped.
RX Error / Dropped Displays the percentage of packets
received that needed to be resent and the percentage of
packets that were dropped.
# Users Displays the number of users connected to the
primary network.
# Guests Displays the number of users connected to the
guest network.

35
Users
Name Displays the hostname, alias, or MAC address of the
connected user. You can click the name to get additional
details. See “User/Guest Details” on page 43 for more
information.
connected user. You can click the name to get additional
details.
network in use.
between the user and AP.
TX Displays the TX (transmit) rate.
Guests
connected guest. You can click the name to get additional
details. See “User/Guest Details” on page 43 for more
information.
network in use.
between the guest and AP.
TX Displays the TX (transmit) rate.

36
Configuration
Change device configuration settings. Click the Apply
button to save changes.
Config
Alias Enter or edit the name of the device.
Apply Click Apply to save your change.
Radio(s)
Radio (11n/b/g) or Radio (11n/a)
Channel Select a channel or keep the default setting,
Auto. You can also use the default HT20 for 20 MHz
operation or HT40 for 40 MHz operation.
Note: If the AP is part of a Zero Handoff WLAN
Group, the Channel setting is chosen for you (“Zero
Handoff” on page 9) and cannot be changed.
Tx Power By default the transmit power is set to Auto. You
can also manually select High, Medium, Low, or Custom.
• High The highest TX power available.
• Low The lowest TX power available.
• Medium Halfway between High and Low.
• Custom Custom setting that you specify.
If the AP is using an external antenna, the Antenna Gain
field will appear, allowing you to specify the gain of the
attached antenna. After applying the settings, go to
Transmit Power under Details > Radio, which always
shows EIRP, and place the mouse over it to display how
it’s calculated.

37
WLANs
You can deploy multiple wireless networks organized into
WLAN groups on different Access Points.
WLANs (11n/b/g) or WLANs (11n/a)
WLAN Group Select the appropriate WLAN group from
the drop-down menu.
Name Displays the network name or SSID of the available
wireless network.
Overrides SSID override information applied to the
wireless network.
• Override Click Override to enable a VLAN (Virtual
Local Area Network), set the VLAN ID, and enter the SSID
override name to apply to the wireless network.
Note: The Override option is not available for a
Zero Handoff WLAN Group.
Override
Enabled Select the checkbox to enable override settings
on the Access Point.
VLAN Select the checkbox to enable the VLAN.
• VLAN ID The VLAN ID is a unique value assigned to
each VLAN on a single device. Enter a value between
2 and 4095. For example, in a large deployment where
there are multiple buildings, you can use a different
VLAN ID for each building while all of the VLANs remain
on the same corporate network.
SSID Enter the SSID override name to apply to the
wireless network.
PSK If the WPA-Personal security option has been applied
to the WLAN under “Settings > Wireless Networks” on
page 8, the Pre‑Shared Key (PSK) for the SSID specified
will automatically appear in this field.
• Restore Click Restore to remove any overrides that
were applied to the selected wireless network.

38
Network
Configure the Access Point to obtain an IP address
automatically or use a static IP address.
Configure IP Select Using DHCP or Static IP:
• Using DHCP Obtain the IP address, gateway IP address,
and DNS (Domain Name Server) addresses dynamically
from the external DHCP server.
• Static IP Assign fixed network settings to the Access
Point.
-- IP address Enter the IP address for the Access Point.
-- Subnet mask Enter the subnet mask for the
Access Point.
-- Gateway Enter the IP address of the gateway.
-- Preferred DNS Enter the IP address of the primary
DNS server.
-- Alternate DNS Enter the IP address of the secondary
DNS server.
-- DNS suffix Enter the FQDN (Fully Qualified Domain
Name) without the hostname.

39
Wireless Uplinks
When an Access Point is not connected by a wire, the
Wireless Uplinks section lists potential uplink Access Points
that can be selected to establish a wireless connection.
Potential Uplinks
AP Displays the name or MAC address of the potential
Uplink Access Point.
Channel Displays the channel in use for wireless
communication.
Signal Displays the percentage of signal strength.
• Select Click Select to connect the wireless Access Point
to the wired Access Point.
• Remove Click Remove to remove the wired Access
Point from this list of Potential Uplinks.
Note: An Access Point can only uplink to another
Access Point using the same radio band. For
example, the UAP-Outdoor 5G can only uplink to
another UniFi AP using the 5 GHz radio band.
Access Point - Heartbeat Missed
When a wired Access Point is disconnected from the
router, its state will initially change to Heartbeat Missed,
followed by Isolated, and ending with Disconnected.

40
Access Point - Isolated
When an Access Point is in an Isolated state, you can
reestablish a connection to the UniFi Controller software
using one of three methods:
• Reconnect the Access Point to the router.
• Connect an Ethernet cable from the Secondary Ethernet
Port (if available) of the isolated Access Point to the
Secondary Ethernet Port (if available) of another UniFi AP
that is connected to the router.
• Establish a wireless uplink to a wired Access Point. See
“Wireless Uplinks” on page 39 to find, select, and
connect to a wireless Access Point.
Isolated Access Point In an Isolated state, the Access
Point icon will change to red/orange with an Isolated icon
on the Map tab.
The LED on the actual device will be steady green with
occasional flashing. This Access Point doesn’t provide any
wireless service.
Note: Do not use the Forget this AP option when the
Access Point is in an Isolated state. If you do, then the
only way to make the Access Point accessible from
the UniFi Controller is to take it down and connect it
by wire.
Access Point - Disconnected
When an Access Point is in a Disconnected state, you can
reestablish a connection to the UniFi Controller software
using one of three methods:
• Reconnect the Access Point to the router.
• Connect an Ethernet cable from the Secondary Ethernet
Port (if available) of the isolated Access Point to the
Secondary Ethernet Port (if available) of another UniFi AP
that is connected to the router.
• Establish a wireless uplink to a wired Access Point. See
“Wireless Uplinks” on page 39 to find, select, and
connect to a wireless Access Point.
Disconnected Access Point In a Disconnected state,
the Access Point icon will change to red/orange with a
Disconnected icon on the Map tab.
The LED on the actual device will be steady green with
occasional flashing. This Access Point doesn’t provide any
wireless service.
Note: Do not use the Forget this AP option when the
Access Point is in a Disconnected state. If you do, then
the only way to make the Access Point accessible
from the UniFi Controller is to take it down and
connect it by wire.

41
Access Point - Managed by Other
The Managed by Other state indicates that the Access Point
is not in the default state but it is not controlled by the
UniFi Controller.
Overview
MAC Address Displays the MAC address of the Access
Point.
Access Point.
Last Seen Displays the amount of time that has passed
since the Access Point was last seen.
Advanced Adoption
IP Displays the IP address and SSH port of the Access
Point.
Username Enter the SSH Username for management
access. This is the Device Username you configured in
“Settings > Site” on page 7.
Password Enter the SSH Password for management
access. This is the Device Password you configured in
“Settings > Site” on page 7.
Inform URL This tells the AP where to look for the UniFi
Controller. The URL will be automatically displayed but
you may need to verify its accuracy as the system may
have multiple interfaces.
Adopt Click Adopt to adopt the Access Point so you can
manage it using the UniFi Controller software.

42
Access Point - Pending Approval
The Pending Approval state indicates that the Access Point
is in the default state and is available for adoption.
MAC Address Displays the MAC address of the Access
Point.
Access Point.
Last Seen Displays the amount of time that has passed
since the Access Point was last seen.
Adopt Click Adopt to adopt the Access Point so you can
manage it using the UniFi Controller software.
Forget this AP/Move
Forget Remove the Access Point from management by
the UniFi Controller software and reset it to factory default
settings.
Note: Use caution when clicking Forget. This will
restore the Access Point to factory settings when
it is in a Connected state. Do not use the Forget
option when the Access Point is in an Isolated or
Disconnected state. If you do, the only way to make
the Access Point accessible from the UniFi Controller
is to take it down and connect by wire.
Move to To move the Access Point, select another site
from the drop-down menu.

43
Chapter 10: User/Guest DetailsUniFi®
Chapter 10: User/Guest Details
The User and Guest hyperlinks open the User/Guest Details
window. Unless otherwise needed to specify differences
between the user and guest, this User Guide will refer to
both as user in the rest of this chapter.
The upper part of the window has four clickable tabs:
• Details (see below)
• Statistics (see the next column)
• “History” on page 44
• “Configuration” on page 44
The bottom of the window has two or three buttons:
• Block Block this user from accessing the network.
• Reconnect Reconnect a user that has been previously
blocked.
• Unauthorize (Available for guests only.) Remove
authorization of wireless guest access and disconnect
the client.
Details
Overview
MAC Address Displays the MAC address of the user.
Hostname Displays the name (if defined).
Uptime Displays the amount of time the Access Point has
been running without interruption.
Connected AP Displays the name, alias, or MAC address
of the Access Point in use.
If the user is offline, the following information is displayed:
MAC Address Displays the MAC address of the user.
Hostname Displays the name (if defined).
Last Seen Displays the last date and time the user was
connected to the primary or guest network.
Statistics
ESSID Displays the network name or SSID of the wireless
network in use.
Connected AP Displays the name, alias, or MAC address
of the Access Point in use.
Channel Displays the wireless channel in use.
Signal Displays the signal strength.
TX Rate Displays the TX (transmit) rate.
RX Rate Displays the RX (receive) rate.
Power Save Displays the status of the power save mode.
Down Pkts / Bytes Displays the amount of data
downloaded by the user in packets and bytes.
Up Pkts / Bytes Displays the amount of data uploaded by
the user in packets and bytes.
Note: The Statistics tab will only appear when the
user is connected.

44
Chapter 10: User/Guest DetailsUniFi®
History
Date/Time Displays the date and time the user first
connected to the Access Point.
Duration Displays the length of time the user was
connected to the Access Point.
Down Displays the amount of data downloaded by the
user during the session.
Up Displays the amount of data uploaded by the user
during the session.
Configuration
Config
Alias Enter a name for the user.
Note Enter a description or comments. Once the note is
saved, the user will be designated a “Noted” client on the
Insight > Known Wireless Clients tab.
Usergroups Assign a User Group to the user, or keep
the default, Automatic. User Groups are set up under the
Settings tab > User Groups option (see “Settings > User
Groups” on page 13 for more information).
Debug
Device Type Displays the manufacturer of the client
device.

45
Chapter 11: Hotspot ManagerUniFi®
Chapter 11: Hotspot Manager
Hotspot Manager includes four main tabs when accessed
by the UniFi Controller admin account. These tabs include
Wireless Guests, Payments/Transactions, Vouchers, and
Operator Accounts.
The UniFi Controller admin can create operator accounts
for the Hotspot Manager. Operator accounts are
designed for use by hotels or other businesses to service
guests and have no access to other UniFi administrative
features. Operator accounts will have access to three
tabs after login: Wireless Guests, Payments/Transactions,
and Vouchers.
Wireless Guests
The Hotspot’s active wireless guests are displayed.

Search Enter keywords in the Search field to find a
specific guest based on Name/MAC Address, Package,
Amount, Authorized By, or Status value.
Show guests within Filter by time duration: last
24 hours, 3 days, 7 days, 2 weeks, 30 days, and 120 days.
Name/MAC Address Displays the connected guest’s
device name or MAC address.
Package Displays the description of the package that was
purchased (if applicable).
Amount Displays the amount paid for access (if
applicable).
Authorized By Displays the authorization method. If
there is no authorization, then None is displayed.
Download Displays the total amount of data
downloaded.
Upload Displays the total amount of data uploaded.
Status Displays the remaining session time for the guest.
• Disconnect Immediately disconnect the selected guest.
• Extend Every time you click this button, you extend a
guest’s session for an additional 24 hours. For example,
if you click it three times, you will extend guest access
for three more days.

46
Payments/Transactions
The Hotspot’s payments and transactions are displayed.
specific voucher based on Time, Name, Package, Amount,
Extra Info, or Status value.
Show guests within Filter by time duration:
last 24 hours, 3 days, 7 days, 2 weeks, 30 days, and
120 days.
Time Displays the date and time of the transaction.
Last Name Displays the user’s last name.
First Name Displays the user’s first name.
Package Displays the description of the package.
Amount Displays the amount of the transaction.
Extra Info If the user paid by PayPal, the Extra Info field
displays the email address associated with the PayPal
account. If the user paid by credit card, the Extra Info field
will display the type of credit card and the last four digits
of the credit card used.
Status Displays the status of the transaction.
• Refund Click the Refund button to refund the selected
customer if necessary.
Vouchers
Create vouchers that include distributable codes, duration
values, and use restrictions.
Search Enter keywords in the Search box to find a specific
voucher based on Code, Create Time, Note, Duration, or
Status value.
Print all Unused Vouchers Click Print All Unused
Vouchers to send a page to your printer with the codes
and durations of unused vouchers.
Code Displays each active voucher code.
Create Time Displays the date and time a voucher was
created.
Note Displays any notes that were added using the Add
Notes option during voucher creation.
Duration Displays the duration of minutes, hours, or days
that the voucher enables the user to access the Internet.
Status Indicates whether the voucher is valid for a single
use or multiple uses.
• Revoke Immediately deactivate the selected voucher.
• Print Batch Print the batch of vouchers created at the
same time.
Active Voucher Page Slider Adjust the slider from left to
right to view all Active Vouchers.
Create Vouchers To create a batch of vouchers, complete
the following:
• Create __ Enter the number of vouchers to create.
• __ vouchers Select how often the voucher can be used:
One-time or for Multi-use.
• for __ Select how long the voucher is valid:
8 hours, 24 hours, 2 days, 3 days, 4 days, 7 days, or
User‑defined. If you select User-defined, enter a number
and specify day, minute, or hour.
• Add Notes Click Add Notes to include any notes
specific to this batch of vouchers.
• Create Vouchers Click Create Vouchers to create the
vouchers as specified.

47
Operator Accounts
Create Operator Accounts that can log in to Hotspot
Manager to manage wireless guests, payments or
transactions, and vouchers.
specific operator account based on Name, Password, or
Notes value.
Account Displays the name of the operator.
Password Displays the password.
Notes Displays any descriptive notes.
• Delete Click Delete to remove an operator account.
Create Operator To create an operator account,
complete the following:
• Account Enter a name for the operator. The Account
name can only be A-Z, a-z, or 0-9. No spaces are allowed.
• Password Enter a password for the operator. The
Password has to start with A-Z, a-z, or 0-9. The other
characters can only be printable ASCII characters.
• Notes (Optional) Enter a note to identify or describe the
operator.
• Create Operator Click Create Operator to create the
operator account.
To test the operator account, log out of the
UniFi Controller software and log in using the
operator credentials. Only the Wireless Guests,
Payments/Transactions, and Vouchers tabs will appear.

48
Appendix A: Portal CustomizationUniFi®
Appendix A: Portal
Customization
Overview
With Portal Customization, the UniFi Controller software
allows complete branding of a portal implementation,
allowing you to “white label” your wireless Internet service
as if you had developed it yourself.
In order to provide the maximum flexibility in your
branding effort, the UniFi Controller software provides
total access to the portal directory on the system in which
it is installed.
This open architecture allows you to include unlimited
content while keeping development simple through the
use of plain .html (hand code or use any editor of your
choice). Testing is simple and immediate; simply reload
changes from any browser.
Enabling Portal Customization
By default, Portal Customization is disabled in all Guest
Portal implementations. See “Settings > Guest Control”
on page 10 for more information on enabling the Guest
Portal for the following authentication and landing page
options: No authentication, Simple Password, and Hotspot.
To enable Portal Customization, perform the following
steps:
1. Go to Settings and click Guest Control.
2. Select Guest Portal to enable it, and then select an
authentication method.
3. Select Portal Customization to enable it, and then
click Apply.
Viewing the Default Portal
Once Guest Portal and Portal Customization are enabled,
connect to the Guest Network SSID as shown below,
depending on your platform.
Windows
1. Go to Connect to Network.
-- Windows 8 Go to the Settings menu and click the
Network icon.
-- Windows 7 Right-click the Network icon.
-- Windows Vista Go to Start > Connect To.
2. Select the Guest Network SSID and click Connect.
3. Depending on the security type applied to the
network, enter the security key or password. Click OK
or Connect.
4. Launch your web browser and you will be directed to
the default portal page for the authentication type
configured on the Guest Portal (see “Settings > Guest
Control” on page 10 for screenshots of default
portal pages by authentication method).
Mac
1. Click the AirPort icon in the menu bar (top right
side of the screen).
2. Select the Guest Network SSID and click Connect.
3. Depending on the security type applied to the
network, enter the security key or password. Click OK.
4. Once connected, the AirPort icon will change from
gray to solid black. The number of black lines indicates
the signal strength.
5. Launch your web browser and you will be directed to
the default portal page for the authentication type
configured on the Guest Portal (see “Settings > Guest
Control” on page 10 for screenshots of default
portal pages by authentication method).
Setup
The html and css files are located on the system that the
UniFi Controller software has been installed on. The files
are in the following locations:
Mac
/Applications/UniFi.app/Contents/Resources/data/
sites/<site_name>/portal
Windows
<Drive_Letter>:Users<Username>Ubiquiti UniFidata
sites<site_name>portal
For specific instructions on accessing the files, refer to the
specific operating system:
• “Mac” on page 49
• “Windows” on page 50

49
Mac
1. Navigate to Go > Applications.
2. Control-click the UniFi application and then click Show
Package Contents.
3. Double-click the Contents folder to open it.
4. Double-click the Resources folder to open it.
5. Double-click the data folder to open it.
6. Double-click the sites folder to open it.
7. Double-click the folder whose name matches the name
of the site you are configuring.
8. Double-click the portal folder to open it.

50
9. You have several files that you can customize in the
portal folder (these are described in the Customizable
Default Files section).
10. To customize the voucher, double‑click the bundle
folder to open it.
11. You can customize voucher.css and voucher.html to fit
your needs.
Windows
The Windows files are located in the following location:
<Drive_Letter>:Users<Username>Ubiquiti UniFi
datasites<site_name>portal
Customizable Default Files
The following default customizable html and css files are
located in the portal folder:
• index.html Main landing page that displays pricing to
the guest.
• payment.html Used to submit credit card information.
It requires https and also serves as an example of an
additional .html page.
• fail.html Displayed when there is an error handling a
guest login.
• reset-min.css Standardizes the rendering of HTML
elements across browsers.
• styles.css Controls the style of HTML elements.
The following default files are located in the bundle folder:
• voucher.html Main landing page.
• voucher.css Standardizes the rendering of HTML
elements across browsers.
• messages.properties You can edit this file using a text
editor such as TextEdit. This file defines package costs,
duration of access, package titles, and how the charge
will appear on a customer’s credit card account. Error
messages are also defined by this file.
Additional details on portal customization can be found in
our community site at:
http://kb.ubnt.com/unifi/portal-customization

51
Appendix B: UniFi Discovery UtilityUniFi®
Appendix B: UniFi Discovery
Utility
Overview
The Ubiquiti UniFi Discovery Utility includes tools that
allow the discovery and management of UniFi Enterprise
WiFi System Access Points. It is installed automatically as
part of the UniFi Controller software installation process.
See “Software Installation” on page 2 for more
information.
Launching the UniFi Discovery
Utility
Mac Users
From the Finder, click Go > Applications and double-click
the UniFi-Discover.app icon.
PC Users
For most versions of Windows, go to Start > All Programs
> Ubiquiti UniFi and double‑click the UniFi-Discover icon.
For Windows 8, go to the Start menu and double‑click the
UniFi-Discover icon.
UniFi Discovery Utility Interface
Upon launch, the UniFi Discovery Utility listens to Layer-2
broadcast/multicast beacons from UniFi Access Points
in both a factory default state and an unmanaged state
(adopted but unable to contact the UniFi Controller
software).
MAC Address Displays the MAC address and alias of the
Access Point. The alias is displayed in parentheses if it has
been specified; see “Configuration” on page 36 for
details.
IP Address Displays the IP address of the Access Point
and the method used by the Access Point to obtain an
IP address. The method is displayed as DHCP or Static in
parentheses.
Model Displays the model number of the Access Point.
Version Displays the software version installed on the
Access Point.
Status Displays the current status of the Access Point:
Pending, Managed/Adopted, Login Failed, or IP Unreachable.
There are three buttons available:
• “Locate” on page 52
• “Manage” on page 52
• “Reset” on page 53
Note: To reboot the Access Point, click one of the
buttons listed above and proceed to “Reboot” on
page 53.

52
Locate
Locate the Access Point. The following window will
appear:
Actions Locate is automatically selected.
Username If required, enter the device username.
Password If required, enter the device password.
Apply Click Apply to locate the Access Point. The LED on
the Access Point will flash so that it can be differentiated
from the other Access Points.
Manage
Set the inform URL, allowing the Access Point to be
managed by the UniFi Controller software running
in a NOC or in the cloud. (See “Network Topology
Requirements” on page 1 for a visual representation
of this configuration.) The following window will appear:
Actions Manage is automatically selected.
Set Inform URL Enter the URL, port, and path to the UniFi
Controller software.
Apply Click Apply to save the inform URL.

53
Reset
Reset the Access Point to factory default settings. The
following window will appear:
Actions Restore to factory default is automatically
selected.
Apply Click Apply to reset the Access Point to factory
default settings.
Reboot
To reboot the Access Point, click any of the buttons
(Locate, Manage, or Reset) on the UniFi Discovery Utility
screen. The following window will appear:
Actions Select Reboot from the drop-down menu.
Apply Click Apply to reboot the Access Point.

54
Appendix C: Contact InformationUniFi®
Appendix C: Contact
Information
Ubiquiti Networks Support
Ubiquiti Support Engineers are located around the world
and are dedicated to helping customers resolve software,
hardware compatibility, or field issues as quickly as
possible. We strive to respond to support inquiries within
a 24-hour period.
Online Resources
Support: support.ubnt.com
Community: community.ubnt.com
Downloads: downloads.ubnt.com
2580 Orchard Parkway
San Jose, CA 95131
www.ubnt.com
© 2011-2014 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti,
Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and
UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc.
in the United States and in other countries. All other trademarks are the
property of their respective owners.
JL032814

Uni fi controller_ug

More Related Content

Viewers also liked (20)

Similar to Uni fi controller_ug (20)

More from joko (20)

Recently uploaded (20)

Uni fi controller_ug