![CounterPath Corporation
52
B Dial Plan
You can create a dial plan to modify the the call input (what you type, select or drag onto the call entry field) to
ensure that the call gets placed successfully. Modifying the input is useful when using numbers from a contact,
which may include symbols such as the + symbol.
Do You Need to Read this Information?
You do not have to read this dial plan information if the default dial plan behavior (below) is acceptable.
If you need to modify the input (for example, to prefix the number with “9”), then you must create a dial plan.
The Default Dial Plan
The default dial plan is:
#naa.T;match=1;prestrip=2;
where #n is the account prefix; in other words #1 for the first account and so on.
X-Lite supports only one SIP account, so there is no point in including the #1 when you place a call. However,
if you are used to eyeBeam, you may be used to entering #1. This dial plan supports that habit: the dialplan
removes the #1 and then places the call on the SIP account.
B.1 Dial Plan Activity
When you make a call, X-Lite takes the phone number (the input) and performs the following:
• Cleanup. This step is not part of the dial plan: it is always performed even when there is no dial plan.
Input is cleaned up by removing spaces, dashes, open brackets, and close brackets. Cleanup allows X-Lite
to support calls placed using contacts from a contact list, including Microsoft® Outlook®.
• Matching. X-Lite compares the input to the patterns in the dial plan. If a match is found, the transformation
associated with the pattern is peformed.
• Transformation. If a match is found between the input and a pattern, that pattern’s transformation (if any) is
peformed.
• Place Call. Then the call is placed using the transformed input.
B.2 Dial Plan Syntax
The dial plan has the following syntax:
pattern[|pattern];match=1;<transformation>=<value>;[match=2;
<transformation>=<value>;]
Where:
• Items in [ ] are optional.](https://image.slidesharecdn.com/x-litewindows4userguider2-140816123805-phpapp02/85/X-lite-windows-4_user_guide_r2-56-320.jpg)
![X-Lite 4 for Windows User Guide
53
• Pattern: the pattern that will be matched. One or more patterns. Each pattern is separated by a | pipe. The
pipe is optional after the last pattern. Each pattern is implicitly numbered, starting from 1.
• Match; Transformation: A pair that identifies the pattern number to compare with the input, and the
transformation to perform on the input when a match is obtained. The transformation is optional (meaning
that if there is no transformation for a pattern, then the input that matches this pattern is not transformed).
One or more pairs.
“match=” is a literal. “n” identifies the pattern. “transformation=” is replaced by a keyword, see below.
“value” is replaced by a value.
Spaces are allowed only in the <value> items.
Example
aa.T|xxxxxxxxxx;match=1;prestrip=2;match=2;pre=8;
where:
• aa.T is the first pattern.
• xxxxxxxxxx; is the second pattern.
• match=1;prestrip=2; is the first match-transformation pair.
• match=2;pre=8; is the second match-transformation pair.
Pattern
Valid Content
The content for a pattern follows the digit map rules of RFC 2705, supplemented by the rules for regular
expressions. Where there is an overlap between the digit map and regular expression rules, the digit map rules
apply. For this reason, there are some special cases, included in the table below.
The following table describes the most common elements. All regular expression elements are supported.
Remember that dial plans are applied after the input has been cleaned up!
Element Origin Description
| Regular
expression rules
Pipe character, used to separate patterns.
0 1 2 3 4 5 6 7 8 9 Literals Literal digits, used as is.
# * a to z Literals Literal characters, used as is. Special cases:
• The literal x character is represented by x.
• The literal t character is represented by t.
x Digit map rules Wildcard for any single digit, 0 to 9.
a Regular
expression rules
Wildcard for any single alphanumeric character.
[digit-digit] Regular
expression rules
A digit within the specified range.
[character-
character]
Regular
expression rules
A character within the specified range.
[digit1, digit2,
digit3]
Regular
expression rules
One of the characters in the collection.](https://image.slidesharecdn.com/x-litewindows4userguider2-140816123805-phpapp02/85/X-lite-windows-4_user_guide_r2-57-320.jpg)
![X-Lite 4 for Windows User Guide
55
Results of the Comparison
X-Lite finds a match according to the following rules.
B.4 Examples
Example 1
aa.T|xxxxxxx.T;match=2;pre="9"
This simple example shows how to differentiate between a PSTN number and a softphone address, and how to
add a “9” dialing prefix only to the PSTN number.
Example 2
3xxT|1xxxxxxxxxx|[2-9]xxxxxxxxx|+x.T;match=2;pre="9";
match=3;pre="91";match=4;prestrip=1;pre="9011"
Type of Match Result If User Presses Enter or Call Result if User Stops typing
The input matches the pattern and the
pattern does not include the T timer
The transformation is performed. X-Lite
attempts the call.
Nothing happens even after the T timer
has expired.
The input matches the pattern and the
pattern includes the T timer
The transformation is performed. X-Lite
attempts the call.
The transformation is performed. X-Lite
attempts the call.
The input does not match the pattern No transformation is performed. X-Lite
attempts the call.
Nothing happens even after the T timer
has expired.
3xxT The first pattern is any three-digit number beginning with 3. No transformation. The
assumption is that this is an internal extension. The timer forces X-Lite to wait after detecting
a three-digit number beginning with 3, in case you are actually dialing a local call starting
with 3.
1xxxxxxxxxx The second pattern is any eleven-digit number beginning with 1. Prefix with 9 and dial as is.
The assumption is that this is a long-distance PSTN call within North America (within North
America, all long-distance calls start with 1).
[2-9]xxxxxxxxx The third pattern is any ten-digit number beginning with a number other than 1. The
assumption is that this is a local PSTN call within a ten-digit dialing zone.
+x.T; The fourth pattern is a number of any length that begins with +, to indicate an international
PSTN call from North America. Delete the +, prefix with 9011 (011 is the number to access
an international line from North America).
match=2;pre="9"; For the second pattern, prefix 9 to access an outside line.
match=3;pre="91"; For the third pattern, prefix 9 and 1 to access an outside line and enter the long-distance code.
match=4;prestrip=1;
pre="9011"
For the fourth pattern, remove the + and prefix 9011 to access an outside line and enter the
international code.](https://image.slidesharecdn.com/x-litewindows4userguider2-140816123805-phpapp02/85/X-lite-windows-4_user_guide_r2-59-320.jpg)
X lite windows-4_user_guide_r2
- 1. X-Lite 4 for Windows User Guide
- 2. CounterPath Corporation 2 CounterPath Corporation Suite 300, One Bentall Centre 505 Burrard Street, Box 95 Vancouver, BC V7X 1M3 Tel: 604.320.3344 sales@counterpath.com www.counterpath.com © August 2011 CounterPath Corporation. All rights reserved. Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and other countries. This document contains information proprietary to CounterPath Corporation, and shall not be used for engineering, design, procurement, or manufacture, in whole or in part, without the consent of CounterPath Corporation. CounterPath and the logo are trademarks of CounterPath Corporation. The content of this publication is intended to demonstrate typical uses and capabilities of the CounterPath X- Lite 4 softphone application from CounterPath Corporation. Users of this material must determine for themselves whether the information contained herein applies to a particular IP-based networking system. CounterPath makes no warranty regarding the content of this document, including—but not limited to—implied warranties of fitness for any particular purpose. In no case will CounterPath or persons involved in the production of this documented material be liable for any incidental, indirect or otherwise consequential damage or loss that may result after the use of this publication. This manual corresponds to version 4.1 of X-Lite 4 for Windows. Revision 2
- 3. i Contents Introduction...................................................................................................................................1 Installation and Setup....................................................................................................................3 Getting Ready .........................................................................................................................3 Installing X-Lite......................................................................................................................4 Configuring X-Lite .................................................................................................................4 Troubleshooting......................................................................................................................6 Checking for X-Lite Updates..................................................................................................6 Using X-Lite .................................................................................................................................7 Starting X-Lite ........................................................................................................................7 Shutting Down ........................................................................................................................8 The Onscreen Softphone.........................................................................................................8 Placing a Call..........................................................................................................................11 Handling Incoming Calls........................................................................................................13 Handling an Established Call..................................................................................................14 Handling Video Calls..............................................................................................................15 Voicemail................................................................................................................................16 Instant Messaging ...................................................................................................................17 Using Resources ...........................................................................................................................19 Contacts Tab ...........................................................................................................................19 History Tab .............................................................................................................................23 Availability .............................................................................................................................24 Configuring X-Lite .......................................................................................................................29 Configuring your Account......................................................................................................29 Configuring Preferences .........................................................................................................37 A Troubleshooting ........................................................................................................................49 B Dial Plan....................................................................................................................................52 C Location of Files .......................................................................................................................56 D Glossary ....................................................................................................................................57
- 5. 1 1 Introduction Standard Telephone Features The CounterPath X-Lite 4 for Windows softphone has all standard telephone features, including: • Call display and Message Waiting Indicator (MWI). • Speakerphone and Mute. • Redial, Hold. • Call history – list of received, missed, and dialed calls. Enhanced Features and Functions X-Lite for Windows also supports the following features and functions: • Video • IM and presence using the SIMPLE protocol. • Managed contact list. • Automatic detection and configuration of audio and video devices. • Acoustic echo cancellation, automatic gain control, voice activity detection. • Support for the following audio codecs: Broadvoice-32, Broadvoice-32 FEC, DVI4, DVI4 Wideband, G.711aLaw, G.711uLaw, GSM, iLBC, L16 PCM Wideband, Speex, Speex FEC, Speex Wideband, Speex Wideband FEC. • Automatic selection of the best codec based on the other party’s capability, the available bandwidth, and network conditions. X-Lite switches the codec within a call in response to changing network conditions. • Compliance to 3261 SIP standard. • STUN and ICE NAT traversal. • Support for DTMF (RFC 2833, inband DTMF or SIP INFO messages).
- 7. 3 2 Installation and Setup 2.1 Getting Ready Account Information After choosing a VoIP service provider, you will need the following information: • User name and password • Authorization Name (if applicable) • Domain • Firewall traversal and other network information; see “Configuring X-Lite” on page 29. System Requirements Microsoft Internet Explorer® 6.0 or later. Processor Minimum: Pentium 4® 2.4 GHz or equivalent Optimal: Intel Core 2 Duo or equivalent; Video Card with DirectX 9.0c support Recommended to support HD video: Intel Core 2 Duo or equivalent with minimum 3.0 GHz, or a triple- or quad-core processor; Video Card with DirectX 9.0c support. Memory Minimum: 1 GB RAM Optimal: 2 GB RAM. Hard Disk Space 50 MB Operating System Microsoft Windows XP Service Pack 3 Microsoft Windows® Vista® Service Pack 1, 32-bits and 64-bits arch Microsoft Windows 7 Service Pack 1. Additional Microsoft Windows Installer 3.1 Microsoft .NET 3.5 SP1 Microsoft VC 9.0 Runtime Service Pack 1 (Note that the installer will take care of installing those if you do not have them). Connection Minimum: IP network connection (broadband, LAN, wireless) Recommended to support HD video: A 2.0 Mbps connection Note that Bria requires a continual internet connection. Sound Card Full-duplex, 16-bit or use USB headset Web browser Microsoft Internet Explorer® 6.0 or later.
- 8. CounterPath Corporation 4 Multimedia Device Requirements X-Lite requires both speakers and a microphone to make calls. Any of the following configurations are acceptable: • External speakers and microphone • Built-in speakers and microphone • Dual-jack multimedia headset • USB multimedia headset • USB phone. Video Cameras Calls made with X-Lite will work without a video camera, but a video camera is necessary to allow other parties to see your image. X-Lite will work with most USB video cameras. 2.2 Installing X-Lite Run the X-Lite installer and follow the prompts in the install wizard. If you want to configure X-Lite immediately, then at the final step of the wizard, select Launch X-Lite. 2.3 Configuring X-Lite If X-Lite is not already running, start it as you would any other program: Use the Windows Start menu or double-click the desktop icon. X-Lite appears.
- 9. X-Lite 4 for Windows User Guide 5 Setting up the Account After obtaining SIP account information from your VoIP service provider, you can set up your X-Lite account. 1. From the X-Lite menu, choose Softphone > Accounts. The Account Settings window appears. 2. In the Account tab, complete the User Details area with the information obtained from your VoIP service provider. 3. Complete the remaining tabs as specified by your service provider or to suit your setup. Settings that you may need to change immediately include: • Account tab, Domain Proxy area. • Topology tab, if your computer is on a network and/or behind a firewall. For more information, see “Configuring X-Lite” on page 29. Setting up for Voicemail Your VoIP service provider may offer voicemail. If it does, then you can set up some voicemail features in X- Lite. See page 31. Setting up a Contact List Typically, you will want to create contacts in order to easily make calls and send IMs. See page 20.
- 10. CounterPath Corporation 6 2.4 Troubleshooting X-Lite 4 includes three tools for helping you troubleshoot problems: • You can verify that your microphone, speakers and camera are working and can set the volume to a comfortable level without having to actually place a phone call. • You can verify that you are successfully connected to the network. • While you are on a phone call, you can test the quality of the audio. Note that to perform a valid test, you should be on an established call (not a call attempt). See page 49. 2.5 Checking for X-Lite Updates To check for updates to X-Lite, choose Help > Check for Updates. The Auto Update window appears. • If a new version of the software is available, you can download it from this window. • If no newer version is available, this window informs you that your version is up to date.
- 11. 7 3 Using X-Lite 3.1 Starting X-Lite If X-Lite is not already running, start it as you would any other program: Use the Windows Start menu or double-click the desktop icon. X-Lite appears. Receiving an Online Status Request If availability is enabled, then at any time you may get an Online Status Request dialog. For information on this request, see “Availability” on page 24. USB Device Alert If your headset is a “HID-compliant device”, the USB Device alert may appear the first time you start X-Lite. You can assign functions to the headset. For example, you can set the green button so that it answers an incoming call. If you click Yes, the USB Device Button Setup window appears; see page 41. If you click No, you can still access this window from the Preferences > Devices panel (page 39).
- 12. CounterPath Corporation 8 3.2 Shutting Down To shut down X-Lite, click Softphone > Exit.Note that clicking the Close button (X) on the softphone minimizes X-Lite to the system tray; it does not exit. 3.3 The Onscreen Softphone X-Lite menu. See below. Resources. See page 19 Call entry field See page 11. Dialpad
- 13. X-Lite 4 for Windows User Guide 9 The X-Lite Menu Softphone • Accounts. These settings control how X-Lite interacts with your VoIP service provider. See “Configuring your Account” on page 29. • Preferences. These settings control the way that you work with X-Lite. See “Configuring Preferences” on page 37. • Exit. To shut down X-Lite. You can also exit by pressing Ctrl+Q. View • Change how X-Lite looks. Contacts Lets you work with contacts. Everything in this menu can also be performed directly in the contact list. Actions Lists the actions that you can perform, depending on the current “state” of X-Lite. For example, if a contact is selected, it lists all the actions that can be performed on that contact. Help Provides access to various service-related features.
- 14. CounterPath Corporation 10 Showing and Hiding Parts of the Softphone You can still receive calls when X-Lite is hidden or minimized. If you exit when X-Lite is minimized; X-Lite will start next time as minimized. Minimize to task bar Show/hide dial pad Close to system tray Show/hide resources Resize softphone Open/close video window
- 15. X-Lite 4 for Windows User Guide 11 3.4 Placing a Call You can contact someone using: • A softphone address (for example, kperera@domainA.com) • A traditional phone number, if supported by your VoIP service provider. You can place one more call when another call is already in progress. Place the call. See the table below. The outgoing call opens in its own call panel, below any other existing call panels. You will hear a ringing tone while X-Lite attempts to make a connection. How From the... Description Keying Dialpad or computer keyboard 1. Enter the number or address in the call entry field using the dialpad or the computer keyboard If entering a softphone address, you can enter the entire address (kpereira@domainA.com) or just the name (kpereira). As you type, a suggestion for completing the entry may appear. Choose the suggestion or keep typing. 2. Click the Call button or press Enter. Drag-and-drop contact or previous call Contacts or History tab Drag an entry from the Contacts or History tab. (If the tab contains lots of contacts, first search or filter the list.) Right-click a contact or previous call Contacts or History tab Right-click an entry from the Contacts or History tab and choose Call. (If the tab contains lots of entries, first search or filter the list.) Double-click a contact Contacts tab Contacts have a “double-click” action that either makes an audio phone call or starts an IM. To configure this action, see page 37. Double-click a previous call History tab Double-click an entry. An audio call is placed. Redial Redial button • When the call entry field is empty, click the Call button. • Or click the arrow in the call entry field and select a recent call. An audio call is placed. Call entry field Click to place the call Auto complete suggestions
- 16. CounterPath Corporation 12 Placing another Call To place a new call (without hanging up on the current call), simply place the call in the normal way. A second call panel opens below the current call. The first call is automatically put on hold. Switch between the different calls by clicking Resume on the desired call panel. That call becomes the active call and all other calls are on hold. Ending a Call Click the red End call button on the Call panel (the call can be active or on hold). The call panel closes after a few seconds. Dialing Dialpad 1. If the dialpad is not visible, click the Show/Hide dialpad button. 2. Click the numbers on the dialpad to enter the phone number. 3. Click the Call button or press Enter. How From the... Description Existing call New outgoing call
- 17. X-Lite 4 for Windows User Guide 13 3.5 Handling Incoming Calls X-Lite must be running to answer incoming calls. (If X-Lite is not running, incoming calls may be directed to voicemail; check with your VoIP service provider.) As soon as an incoming call is received, a call panel appears, showing information about the call. In addition, the Call Alert box appears, even if X-Lite is minimized. Action Description Answer Click Answer. If you are on another call, that first call is automatically put on hold. You are now talking to the new caller. Or press Enter (on the keyboard), if X-Lite is the active application. Decline Click Decline. There will be a busy signal. The call may be directed to voicemail (if you have this service). Video The caller wants to include video. Click to answer a video call and start sending your video immediately Audio The callerwants to include video. Click to answer without video; if you want (and if you have a camera), you will be able to add video later. Click to answer a video call and start sending your video immediately Click to answer without video; if you want (and if you have a camera), you will be able to add video later. This is the alert for a video callThis is the alert for an audio-only call
- 18. CounterPath Corporation 14 3.6 Handling an Established Call Audio controls Show video panel (but do not start video) Click to send an IM to this person (this button appears only if the user has an IM address). Place another call (current call is automatically put on hold). See page 12 Show/hide dialpad Start your video. Even if you did not originally place a video call, you can add video at any time (if you have a camera).
- 19. X-Lite 4 for Windows User Guide 15 3.7 Handling Video Calls Placing a Video Call Adding Video If you have a camera, you can click Start Video to add video to an established call. When you add video, the other party may (or may not) start sending their video to you. Other Party Adds Video If the other party starts their video, your video window automatically opens and the video is played. You can start sending your own video, if desired (and assuming you have a camera) by clicking Start Video. Pausing and Resuming Video Click Stop Video or close the video window to pause sending your video. Click Start Video to resume sending your video; the video window will open. How From the... Description Keying Dialpad or computer keyboard 1. Enter the number or address in the call entry field using the dialpad or the computer keyboard If entering a softphone address, you can enter the entire address (kpereira@domainA.com) or just the name (kpereira). As you type, a suggestion for completing the entry may appear. Choose the suggestion or keep typing. 2. Click the arrow beside the Call button and choose Video call. Right-click a contact or previous call Contacts or History tab Right-click an entry from the Contacts or History tab and choose Video Call. (If the tab contains lots of entries, first search or filter the list.) Dialing Dialpad 1. If the dialpad is not visible, click the Show/Hide dialpad button. 2. Click the numbers on the dialpad to enter the phone number. 3. Click the arrow beside the Call button and choose Video call. Call entry field Click the down arrow and choose Video call
- 20. CounterPath Corporation 16 3.8 Voicemail If your service includes voicemail and you have set up voicemail options (page 31), then when you have voicemail messages, a number appears beside the voicemail icon at the top of the phone. You can click the icon to automatically connect to voicemail and listen to your messages. Status of your video Control your video Show/hide video window Voicemail icon
- 21. X-Lite 4 for Windows User Guide 17 3.9 Instant Messaging Sending an IM 1. You can send an IM to a contact who has a softphone address.. The Instant Message window appears. 2. Type the message. Include emoticons and formatting, as desired. To insert a return in the message, press Ctrl+Enter. (You can control the behavior of Enter and of Ctrl+Enter; see page 37) 3. Click Send. Receiving an IM When an IM is received, the IM window pops up. From the Contacts tab Right-click on the contact and choose Send Instant Message. The contact must have a softphone address. An active phone call If the person you are speaking to is a contact, cick on the call panel. Click to edit the profile Message input area
- 23. 19 4 Using Resources 4.1 Contacts Tab The Contacts tab displays your contacts and lets you specify multiple contact methods for them, including: • Softphone address • Home phone number, business phone number, mobile phone number You can identify one of these contacts as the primary contact method. When you double-click a contact, the action associated with that method is performed: typically either phone or IM. Contacts are typically organized into groups. X-Lite includes built-in groups: “Family”, “Friends” and “Work”. You can add more groups, as desired. Add a Contact The availability of others. See page 24. Search field Detach the contact list
- 24. CounterPath Corporation 20 Managing Contacts and Groups Adding a Contact Click , or right-click a group and choose Add Contact to Group. The Contact Profile dialog appears. See the table. Field Description Contact Summary Display as If several display names are available, choose the one that you want to show in the contact list. Group Click to show the list of groups. Check each group this contact should belong to. Primary presence This field appears only the contact has more than one Softphone number or Instant Message address. The primary presence is used as follows: • The presence icon on the contact list shows the online status for this address. • The single-click and double-click actions for instant messaging use this address. You can still send IMs to this person at their other addresses, but you must right-click and choose from the context menu. Primary phone number If the contact has more than one number, select the primary number. This number will be used with single-click calling and double-click calling. Other Sections Display name (required) This name will show in the contact list. First name, Last name Optional. Contact Methods Enter as many contact methods as you want. Use Softphone for someone who has a phone number that can also be used for presence and IM; you will be able to IM this person and view their presence. Otherwise, use Work, Home or another applicable method; X-Lite will not show a presence icon for this type of phone number.
- 25. X-Lite 4 for Windows User Guide 21 Adding a Contact using an Existing Address You can add a contact by capturing existing information. On the History tab, select an entry that is not a contact. Right-click and choose Add as Contact. The Contact Profile dialog appears. Complete the dialog as desired and press OK. If the contact method is Softphone, an online status request is sent to this person. See “Sharing Availability” on page 24. Changing Contact Information To change the information for a contact, right-click the contact and choose Edit Profile. The Contact Profile dialog appears (see page 20). Moving or Deleting a Contact • To drag one or more contacts to a different group, select them and drag to the title bar of the new group. • To delete one or more contacts, select them, right-click, and choose Delete. The contacts are removed from this group. If a contact belongs to several groups, it is removed from all groups. Adding, Deleting or Renaming Groups Select any group, right-click, and choose the appropriate menu item. Using Contacts Phone or IM the person • Double-click the contact to start a phone call or IM to the person (depending on how double-clicking is configured in the contact’s profile). • Drag the contact to the call entry field to start a phone call. Phone the person Right-click and choose Call, then click the desired number. Send an IM Right-click and choose Send Instant Message. See page 17. You can watch the contact’s availability, if the contact has a softphone address See Table 1 on page 26 for the meaning of the availability icons. See “Availability” on page 24 for information on obtaining availability information.
- 26. CounterPath Corporation 22 Contact Flyout Left-click on a contact to show the Contact flyout. This flyout shows all the contact methods set up for the contact. You can click a contact method to perform its action. Click a contact method
- 27. X-Lite 4 for Windows User Guide 23 4.2 History Tab Managing the Lists of Calls You can right-click on an entry in a list to: • Delete the call. • Delete all entries in this list. • Edit the profile if the entry is a contact. • Add as contact. The Add a Contact dialog appears. For more information on this dialog, see “Adding a Contact using an Existing Address” on page 21. Phoning from History You can right-click on an entry to place a call to this person, using the contact method that was used for this call. You can also double-click to place an audio call. Filter list Incoming missed call Incoming call that was answered Detach the history list Outgoing call, either attempted or established
- 28. CounterPath Corporation 24 4.3 Availability Availability refers to the ability to see whether a person is available or not: online, on the phone, busy, and so on. You can publish your availability to contacts who have softphone address, and you can set up X-Lite to view the availability of other contacts. Sharing Availability Watching Others’ Availability When you create a contact by entering details in the Contact Profile, the contact is automatically set up so that you share availability. As soon as the person is set up in this way in your Contacts, X-Lite sends them a notification request. The request asks that you be able to see that person’s availability. If the person allows this request, then the icon beside their name (in your Contacts) becomes color coded, so you can determine their availability. Allowing Other Parties to See your Availability (Publishing your Availability) Continuing from above, when the other person allows the notification request, your name is added to their contact list. As soon as you are added to their list, a request is sent back to you requesting that they be able to see you. X-Lite accepts this request automatically, and the other person can now see your availability. Your availability Availability of other people This person is either logged out or is not publishing her availability This person has no icon because you are not subscribing to her availability
- 29. X-Lite 4 for Windows User Guide 25 Receiving an Online Status Request When someone who is not one of your contacts has you as a contact on their end, you receive an Online Status Request. The request appears to you as an Online Status Request. You must respond to the request: • Allow the request and create a new contact using this address. This option is selected for you if you do not currently have a contact with this SIP address. • Allow the request and update the contact to allow the person to see your presence. This option is selected for you if you already have a contact with this SIP address but you were not previously sharing presence with this person. Button Result Allow The other person will be: • Able to see your availability. • Added to your contacts. Because you allow the request, you will no longer be bothered by requests from this person. In addition, this same request will automatically be sent from your X-Lite to the other person, so that you can see their availability. Ignore The other person will not be able to see your availability. The Online Status Request may appear again in this session or a future session
- 30. CounterPath Corporation 26 Setting your Availability Changing your Availability Click the down arrow beside the availability indicator on X-Lite, and select the desired availability. See Table 1, below. When your availability changes, the new availability is sent to everyone who has permission to see your availability. Setting up Availability Indicators You can create custom availability indicators, or edit or delete custom or built-in indicators: click the down arrow beside the availability indicator, and choose Custom Message. Table 1: Availability Indicators Indicator Meaning for your Availability Meaning for Others’ Availability Available Either: • You have set your availability to this status. • X-Lite has determined that you are logged on but not on the phone or idle. When you have this availability, X-Lite will automatically detect when you are idle or on the phone, and change the availability to match. You can contact this person. Busy You have set your availability to this status. X-Lite will never automatically switch you out of this status; you must switch yourself. You can contact this person. Away You have set your availability to this status. X-Lite will never automatically switch you out of this status; you must switch yourself. You can contact this person.
- 31. X-Lite 4 for Windows User Guide 27 On the phone Either: • You have set your availability to this status. In this case, X-Lite will never automatically switch you out of this status; you must switch yourself. • You started a phone call when your status was “Available”. When your call finishes, your status reverts to “Available”. You can contact this person. Idle You have not moved or clicked the mouse or pressed a keyboard key for the Idle period. As soon as you click the mouse or keyboard, your status changes to “Available”. You can contact this person. Appear offline You have set your availability to this status. The other person sees you as offline, even though you are actually online. The other person cannot tell the difference between this status and you really being offline. The contact is either not logged on or else is not set up for availability. No icon Not applicable You are not watching the other person’s availability. Table 1: Availability Indicators Indicator Meaning for your Availability Meaning for Others’ Availability
- 33. 29 5 Configuring X-Lite You can configure X-Lite in several ways: • Configure global behavior. See “Configuring Preferences” on page 37. • Configure the behavior on a per-account basis. See “Configuring your Account” on page 29. 5.1 Configuring your Account Choose Softphone > Accounts. The Account Settings window appears. SIP Account Properties – Account The red dot indicates that these fields are required
- 34. CounterPath Corporation 30 Table 2: SIP Account Properties – Account Field Description Account name If desired, change the account name to something that is meaningful to you. For example, the name of the VoIP service provider. Protocol Read-only. Always specifies SIP. Allow this account for Call Leave this field checked. Allow this account for IM/ Presence Leave this field checked. User Details User ID Typically the account number for the softphone account. For example, kperera. Provided by your VoIP service provider. Domain For example, domainA.com. Provided by your VoIP service provider. Password Provided by your VoIP service provider. Display name This name is displayed in the X-Lite title bar. Other people will see you as this name. Authorization name May not be required. If it is required, it will be provided by your VoIP service provider. Domain Proxy Register with domain and receive calls Check this box if you want to register with your VoIP service provider, so that you can receive incoming calls. Typically, this field is checked. This field may be left unchecked when, for example, your level of service does not include the ability to receive incoming calls. In that case, turning this field on may cause registration to fail (when you close the Account Properties window), meaning that your X-Lite cannot register with your VoIP service provider. Send outbound via Choose the setting specified by your VoIP service provider: • Domain: If your VoIP service provider requires that traffic be directed to proxies that are discovered via the domain. • Proxy Address: If your VoIP service provider has an outbound proxy address and requires that you provide the address to X-Lite. For the address enter a domain name (for example, domain.com) or an IP address (for example, 123.456.789.012). If you are using X-Lite in a test lab, it is possible that neither of these settings is suitable; see page 36 for a third way to direct traffic. Dial Plan Information about the syntax of the numbers used by this VoIP service provider. Provided by the service provider. For information on determining whether you need to create a dial plan, see page 52.
- 35. X-Lite 4 for Windows User Guide 31 SIP Account Properties – Voicemail These settings let you set up to interact with your VoIP service provider’s voicemail service. They also let you configure X-Lite to forward calls in several situations, independent of your VoIP service provider’s voicemail service. Your service provider may provide the ability to set up for voicemail outside of X-Lite, for example, by phoning a softphone address and following the voice prompts, or by accessing a website. Check with your service provider to determine if another setup mechanism is available. If so, check what the settings are in that setup, and make sure you enter compatible information in X-Lite. Table 3: SIP Account Properties – Voicemail Field Description Check for voicemail Set the checkbox in one of these ways: • Check the box if X-Lite must subscribe to be notified when there is a voicemail for you. In other words, to configure for “subcribe for message waiting”. • Clear the checkbox if the service provider’s voicemail server sends notifications without X-Lite subscribing. In other words, to configure for “implicit subscription”. • Clear the checkbox if the service provider does not support voicemail. Check with your VoIP service provider for the correct configuration. Voicemail is offered by your VoIP service provider; it is not part of X-Lite. Contact your service provider for information on using voicemail. Number to dial for checking voicemail Optional, but complete this field only if your VoIP service includes voicemail. • Completing this field activates the icon on the softphone. When you click the icon, X-Lite will dial this number. You will be connected to your service provider’s voicemail and can listen to your messages. • If you leave this field empty, then this icon will not work; you will have to manually dial this number in order to connect to voicemail. Enter the number or SIP address provided by your VoIP service provider. Number for sending calls to voicemail Complete only if your VoIP service includes voicemail. Optional, but you must complete it if you check “Send calls to voicemail if unanswered”. This is the number that incoming calls will be forwarded to if they are unanswered after the specified interval (below). If you leave this field empty, then X-Lite will never forward calls to your service providers’ voicemail. However, most VoIP service providers have their own mechanism for sending unanswered phone calls to voicemail. So leaving this field blank does not mean that forward-to-voicemail does not work. Enter the number provided by your VoIP service provider.
- 36. CounterPath Corporation 32 SIP Account Properties – Topology Send calls to voicemail if unanswered Complete only if your VoIP service includes voicemail. To send to voicemail after the specified number of seconds. Your service provider may also provide a similar feature that is set up outside of X-Lite. If so, make sure you do not enter competing information in X-Lite and in the service provider’s user interface. For example, if you turn off this field, make sure the same feature at your service provider is also turned off. Otherwise, all your calls will continue to be forwarded. Table 4: SIP Account Properties – Topology Field Description Firewall traversal mode Leave the default (Auto detect). Or if you have problems making phone calls, contact your VoIP service provider for information on their firewall traversal solution. • Auto detect using ICE: Automatically determine the contact address for signaling traffic. Advertise the local IP, public IP (discovered via STUN, if available), and media relay IP (discovered via TURN, if available), and use these to automatically determine the best route for media traffic during calls. • Discover public IP address: Advertise the public IP address (discovered via STUN) for the contact address for signaling traffic, and for the connection address for media traffic. • Use media relay (TURN): Advertise the public IP address (discovered via STUN) for the contact address for signaling traffic. Advertise the address of a media relay server (discovered via TURN) for the connection address for media traffic. • None: Advertise the local IP address only for both signaling and media traffic. Server address • Empty: Discover the address of the firewall traversal server (the STUN or TURN server), if available, using DNS SRV. • Specified: Use the firewall traversal server specified as either an IP address or a fully qualified hostname. Range of ports used on local computer The appropriate setting depends on your computer setup: • Checked: If your computer is behind a restrictive firewall that only allows specific port ranges to be used. Enter the range of ports to use for your SIP account. (You must also open those ports on your firewall; refer to applicable firewall documentation for information.) • Unchecked: If your computer is not behind a restrictive firewall. Table 3: SIP Account Properties – Voicemail Field Description
- 37. X-Lite 4 for Windows User Guide 33 SIP Account Properties – Presence Presence allows your contacts to see your online availability and allows you to see the online availability of contacts. See “Availability” on page 24. Table 5: SIP Account Properties – Presence Field Description Mode Choose the setting specified by your VoIP service provider: • Disabled: Presence is not supported. • Peer-to-Peer. Poll time Enter the value specified by your VoIP service provider. Refresh interval Enter the value specified by your VoIP service provider.
- 38. CounterPath Corporation 34 SIP Account Properties – Transport Contact your VoIP service provider to identify the types of transport that are supported. Then choose a supported transport: • Automatic: X-Lite sets up the transport based on the capabilities of the network and the X-Lite computer. Choose this option if you do not care which transport is used. • TCP • UDP
- 39. X-Lite 4 for Windows User Guide 35 SIP Account Properties – Advanced Table 6: SIP Account Properties – Advanced Field Description Register Settings Reregister every The time interval between X-Lite’s attempts to reregister in order to refresh the account registration with the VoIP service provider for this account. A value of zero means not to reregister after the initial registration. This value is placed in the “Expires” header field of the REGISTER message. Minimum time If the reregistration fails, X-Lite will wait this amount of time, then attempt to reregister. If the second attempt fails, X-Lite will wait twice this time and try again, then four times this time, and so on, until reregistration succeeds. Maximum time This is the maximum wait time between attempts to reregister. Once this maximum is reached, X- Lite will wait this time for all subsequent attempts. For example, the min. time is 20 secs, the maximum time is 120 secs. X-Lite will attempt to reregister as follows: • Wait 20 secs. • Attempt to connect. • If fail, wait 40 secs. • Attempt to connect. • If fail, wait 80 secs. • Attempt to connect. • If fail, wait 120 secs (the maximum) • Attempt to connect. • If fail, wait 120 secs, and so on. Timers Enable session timers Default session time A session timer is a mechanism to detect whether a call session is still active from the signaling point of view. When the timer expires, a refresh is sent from one party to the other. The timer is then reset. • Turn on to enable session timer. Enter a value in Default session time. • Turn off to disable session timer; refreshes will never be sent.
- 40. CounterPath Corporation 36 Session timer preference This field specifies your preference for which party should send the refresh. The preference is not a guarantee that the refresh will be performed by the specified party. The choices are: • None: No preference. • Local refreshes: Your computer sends. • Remote refreshes: The other party sends. • UAC refreshes: The user agent client (the party that initiated establishment of the communications) sends. • UAS refreshes: The user agent server (the other party) sends. Hold Method Change this setting only if your VoIP service provider advises you to do so. Send SIP keep-alives Typically on, to instruct X-Lite to send SIP keep-alive messages in order to maintain a “pinhole” through your firewall for SIP messaging. Use rport Typically on. Send outgoing request directly to target When checked, requests with a complete URI (user@ABC.com) go to ABC.com and the “Send outbound via” field on the Account tab (page 29) is ignored. If you check this field, make sure you also set “Send outbound via” (on Accounts > Account) to “Domain”. Typically off. This field is intended for test labs and may cause problems in a NAT environment. Table 6: SIP Account Properties – Advanced Field Description
- 41. X-Lite 4 for Windows User Guide 37 5.2 Configuring Preferences Choose Softphone > Preferences. The Preferences window appears. The Preferences panels let you control the way that you work with X-Lite. Preferences – Application This panel lets you set your preferences for general GUI behavior. Button Defaults You can configure green Call button (at the top of the phone) so that it makes a video call instead of an audio call.
- 42. CounterPath Corporation 38 Preferences – Alerts & Sounds This panel lets you control the Call Alerts box and lets you assign sounds. Enable Alert displays You can control whether the Call Alert box is displayed in different situations. You can also control how you are alerted to an incoming IM: either with a small IM Alert box or with the IM window itself. Assigning Sounds You can assign specific sounds to a variety of actions or “events”. 1. Select the Enable sounds check box and select the check boxes for each desired event, or clear the Enable sounds check box to disable all sounds. 2. If enabling sounds, you can change the sound for each event: select the individual event. The value in Sound preference will change. Select the desired sound. You can import sounds; these will be added to the list of sounds you can choose from when assigning a sound to an event.
- 43. X-Lite 4 for Windows User Guide 39 Preferences – Devices X-Lite automatically detects devices at each startup, and selects the most appropriate device for each purpose. If you do not like this selection, you can override it on this panel. If you override a selection, it will apply the next time you start X-Lite, unless the device is no longer available, in which case X-Lite will again select the device to use.
- 44. CounterPath Corporation 40 Table 7: Preferences – Devices Field Description Headset Mode Speaker Microphone Change these fields only if you want to override the devices that X-Lite automatically selected. In both these fields, select the headset you are using. The headset is the device that is usually used for audio out (the sound you hear) and audio in (recording your voice). The only situation in which the headset is not used is when the Speaker Phone button on the dialpad is pressed. Therefore, unless you will always be using X-Lite in speakerphone mode, you must make a selection here. Select the headset in both the Speaker device field and Microphone device field. HID Device If the selected headset device is a HID-compliant device, this field specifies that device. You can click Setup in order to assign functions to the device. For example, you can set the green button so that it answers an incoming call. Speakerphone Mode Speaker Change this field only if you want to override the devices that X-Lite automatically selected. Make the appropriate choice: • Select the device that you want to use for audio out (the sound you hear) when the Speaker Phone button is pressed. Make sure you select a speaker device (not the headset). • Select None if you do not have a speaker phone. The Speaker Phone button on the dialpad is disabled. Microphone Change this field only if you want to override the devices that X-Lite automatically selected. Make the appropriate choice: • Select the device that you want to use for audio in (recording your voice) when the Speaker Phone button is pressed. It can be any microphone: it does not have to be the microphone on the device you specified as the speaker device. For example, it can be the microphone on your camera. • Select None if you do not have a speaker phone. The Speaker Phone button on the dialpad is disabled. HID Device If the selected speakerphone device is a HID-compliant device, this field specifies that device. You can click Setup in order to assign functions to the device. For example, you can set the green button so that it answers an incoming call. (If the speakerphone device is the same as the headset device and you have already configured the device, there is no need to click Setup again.) Other Device Ring On Change this field only if you want to override the devices that X-Lite automatically selected. The device where you want to hear the phone ringing: the headset, the speakerphone, or none.
- 45. X-Lite 4 for Windows User Guide 41 USB Device Button Setup You can assign functions to a USB-compliant device. For example, you can set the green button so that it answers an incoming call.
- 46. CounterPath Corporation 42 Preferences – Network Table 8: Preferences – Network Field Description Network Connection Speed Select the type of network connection for your computer. The sliders move to show the bitrate that will be used for sending and receiving. These rates are typical rates for the selected configuration. If you know that your computer and network can handle a faster sending speed, click Custom and move the slider. It is recommended that you not change the receiving speed. You will know that you have set the sending speed too high if: • The remote video shows black areas or is slow or jerky. • The remote audio is garbled. You will know that you have set the sending speed too low if the audio is good but the video is of poor quality (grainy).
- 47. X-Lite 4 for Windows User Guide 43 Preferences – Audio Codecs This panel shows all the codecs that are included in X-Lite. You can enable or disable codecs as desired. With only one codec enabled, all calls made will use that codec. With more than one codec enabled, X-Lite automatically chooses the best codec based on the other party’s capability, the available bandwidth, and network conditions. You cannot change the properties of any codecs. About Codecs Audio codecs describe the format by which audio streams are compressed for transmission over networks. Codecs can be categorized as either narrowband or wideband: • Narrowband codecs work with low bandwidth such as a dialup internet connection. These codecs have a sampling rate of 8 kHz. • Wideband codecs work with high bandwidths and result in better audio quality. However, they do not work with PSTN. These codecs have a sampling rate of 16 kHz.
- 48. CounterPath Corporation 44 Supported Codecs Codec Narrowband Wideband Broadvoice-32 Broadvoice-32 FEC DVI4 DVI4 Wideband G.711aLaw * G.711uLaw * GSM iLBC L16 PCM Wideband Speex Speex FEC Speex Wideband Speex Wideband FEC * Generally, at least one of these codecs must be enabled in order to place a PSTN (land line) call.
- 49. X-Lite 4 for Windows User Guide 45 Preferences – Video Codecs Video codecs describe the format by which video streams are compressed for transmission over networks. Some codecs require less bandwidth than others, but may result in lower video quality. You can enable or disable codecs as desired. You may decide to disable a codec even though your VoIP service provider supports it. With only one codec enabled, all calls made will use that particular compression format. With more than one codec enabled, X-Lite automatically chooses the best codec based on the other party’s capability, the available bandwidth, and network conditions. You cannot change the properties of any codecs. Supported Codecs Codec Royalty-bearing Included in X-Lite H.263 H.263+ 1998
- 50. CounterPath Corporation 46 Preferences – Quality of Service The Quality of Service panel lets you request a specific transport service for signaling traffic. There are two types of services. The service to use depends on what your internet service provider supports: • GQoS, which is available for audio and video. • DSCP (also known as ToS), which is available for audio, video and signaling. In a network that has the default configuration, the recommended value for audio is 46, because “46” is the standard marking for audio. X-Lite supports 802.1p QoS packet tagging. If you set up for QoS, X-Lite will include the specified information in the packets that it sends to the network provider. Whether the packet is delivered with the specified service depends on whether your broadband router and the network provider between you and the other party supports multiple transport services. In other words, whether each network provider reads the QoS information and prioritizes packet delivery based on the requested service.
- 51. X-Lite 4 for Windows User Guide 47 Preferences – Media Quality Audio Quality Reduce echos Turning this feature on improves sound quality. This feature is typically on. Reduce background noise Automatically attempts to remove background noise. Typically on for the speakerphone. Automatic gain control This feature is typically on. Preserve bandwidth When this feature is on, X-Lite stops sending audio when you are not talking. When this feature is off, X-Lite always sends audio, which uses more bandwidth but may result in better call quality. Typically off. However, if you are using a slow (dial-up or ISDN) connection, you may want to turn it on. Volume Control Choose the setting that suits your setup. Video Quality Enable this option Check or uncheck to flip the video image. Resolution Leave at standard, or change the size as follows: • Set it to high if you have a good camera and a computer with a fast CPU. You will know that you have set the size too large if: Your computer slows down (the video is using too much CPU) The video shows black areas or is slow or jerky. • Typically set it to low only in special situations, for example, when using wi-fi in a hotel. You will know that you have set the size too small if the video is fuzzy.
- 52. CounterPath Corporation 48 Preferences – Advanced Table 9: Preferences – Advanced Field Description DTMF You may need to change the DTMF configuration if you cannot interact with interactive voice response systems (auto attendants, voice-activated menus, and so on). RTP This timer controls how calls are disconnected when X-Lite determines that there is a problem with the call and the other party has probably disappeared (assuming that you have not yourself detected the problem and hung up manually). Typically, the timer is enabled. It is recommended that you not disable it. You can change the length of the timer, but do not set it to less than 30 seconds.
- 53. 49 A Troubleshooting Choose Help > Troubleshooting to display the Troubleshooting window. Testing Audio and Video Devices You can verify that your microphone, speakers and camera are working and can set the volume to a comfortable level without having to actually place a phone call. Testing the Network Connection You can verify that you are successfully connected to the network.
- 54. CounterPath Corporation 50 Testing Audio Quality While you are on a phone call, you can test the quality of the audio. Note that to perform a valid test, you should be on an established call (not a call attempt). Diagnostics Only use this panel if instructed to do so by your support representative at your VoIP service provider. To start logging X-Lite activity and send a logging report to customer support: 1. Click Start Logging. The first Diagnostics Logging window appears.
- 55. X-Lite 4 for Windows User Guide 51 2. Select the problem you are experiencing and click Start Logging. 3. On the second Diagnostics Logging screen, click Finish. Logging will start. 4. Perform the actions you want to capture; for example, attempt to make a phone call. 5. When done, choose Help > Troubleshooting > Diagnostics again and click Send Report. Select the report and send it. 6. When the report has been sent, click Stop Logging. Click Done to close the Troubleshooting window.
- 56. CounterPath Corporation 52 B Dial Plan You can create a dial plan to modify the the call input (what you type, select or drag onto the call entry field) to ensure that the call gets placed successfully. Modifying the input is useful when using numbers from a contact, which may include symbols such as the + symbol. Do You Need to Read this Information? You do not have to read this dial plan information if the default dial plan behavior (below) is acceptable. If you need to modify the input (for example, to prefix the number with “9”), then you must create a dial plan. The Default Dial Plan The default dial plan is: #naa.T;match=1;prestrip=2; where #n is the account prefix; in other words #1 for the first account and so on. X-Lite supports only one SIP account, so there is no point in including the #1 when you place a call. However, if you are used to eyeBeam, you may be used to entering #1. This dial plan supports that habit: the dialplan removes the #1 and then places the call on the SIP account. B.1 Dial Plan Activity When you make a call, X-Lite takes the phone number (the input) and performs the following: • Cleanup. This step is not part of the dial plan: it is always performed even when there is no dial plan. Input is cleaned up by removing spaces, dashes, open brackets, and close brackets. Cleanup allows X-Lite to support calls placed using contacts from a contact list, including Microsoft® Outlook®. • Matching. X-Lite compares the input to the patterns in the dial plan. If a match is found, the transformation associated with the pattern is peformed. • Transformation. If a match is found between the input and a pattern, that pattern’s transformation (if any) is peformed. • Place Call. Then the call is placed using the transformed input. B.2 Dial Plan Syntax The dial plan has the following syntax: pattern[|pattern];match=1;<transformation>=<value>;[match=2; <transformation>=<value>;] Where: • Items in [ ] are optional.
- 57. X-Lite 4 for Windows User Guide 53 • Pattern: the pattern that will be matched. One or more patterns. Each pattern is separated by a | pipe. The pipe is optional after the last pattern. Each pattern is implicitly numbered, starting from 1. • Match; Transformation: A pair that identifies the pattern number to compare with the input, and the transformation to perform on the input when a match is obtained. The transformation is optional (meaning that if there is no transformation for a pattern, then the input that matches this pattern is not transformed). One or more pairs. “match=” is a literal. “n” identifies the pattern. “transformation=” is replaced by a keyword, see below. “value” is replaced by a value. Spaces are allowed only in the <value> items. Example aa.T|xxxxxxxxxx;match=1;prestrip=2;match=2;pre=8; where: • aa.T is the first pattern. • xxxxxxxxxx; is the second pattern. • match=1;prestrip=2; is the first match-transformation pair. • match=2;pre=8; is the second match-transformation pair. Pattern Valid Content The content for a pattern follows the digit map rules of RFC 2705, supplemented by the rules for regular expressions. Where there is an overlap between the digit map and regular expression rules, the digit map rules apply. For this reason, there are some special cases, included in the table below. The following table describes the most common elements. All regular expression elements are supported. Remember that dial plans are applied after the input has been cleaned up! Element Origin Description | Regular expression rules Pipe character, used to separate patterns. 0 1 2 3 4 5 6 7 8 9 Literals Literal digits, used as is. # * a to z Literals Literal characters, used as is. Special cases: • The literal x character is represented by x. • The literal t character is represented by t. x Digit map rules Wildcard for any single digit, 0 to 9. a Regular expression rules Wildcard for any single alphanumeric character. [digit-digit] Regular expression rules A digit within the specified range. [character- character] Regular expression rules A character within the specified range. [digit1, digit2, digit3] Regular expression rules One of the characters in the collection.
- 58. CounterPath Corporation 54 Transformation Keywords Order of Transformations These transformations are always performed in the following order (the order in which the transformations are entered in the dial plan is not significant): prestrip > poststrip > pre > post > replace B.3 How the Input Is Processed Comparing Input to the Dial Plan Patterns The input is compared to the dial plan. Keep in mind that the input being compared is different depending on whether the input is dragged/selected or typed: • If the input is dragged or selected, then the entire input is compared to each pattern. • If you are typing the input, then the digits are compared one by one as they are entered. Each time a new digit is entered, the comparison starts over again. . Digit map rules Repeat the last element 0 or more times. For example, xxxx. means repeat the last x 0 or more times, which means this pattern matches three or more digits (not four or more digits)! Use of this element results in a pattern with “minimum requirements”. T Digit map rules A timeout period will take place before automatic dialing starts. The T timer forces X-Lite to wait after a match is made. This timer should always be included in these situations: • Any pattern that uses the . (dot). For example, if the pattern is xxxx. then adding a timer lets you type three or more digits. If there is no timer, then as soon as you type three digits, X-Lite makes the match as soon as you type three digits. • Any dial plan that has two patterns that are similar in elements but different in length. For example, if one pattern is xxx and the other pattern is xxxxxxx, then adding the timer lets you continue typing past three digits, in order to get a match on the second pattern. In this situation, the T timer should be included in the shorter pattern. Keyword Description prestrip Strip the first n characters from the input before placing the call. poststrip Remove n number of characters from the end of the input before placing the call. pre Add the specified prefix to the input before placing the call. post Attach the specified postfix to the input before placing the call. replace Replaces the input with the specified string before placing the call. Element Origin Description
- 59. X-Lite 4 for Windows User Guide 55 Results of the Comparison X-Lite finds a match according to the following rules. B.4 Examples Example 1 aa.T|xxxxxxx.T;match=2;pre="9" This simple example shows how to differentiate between a PSTN number and a softphone address, and how to add a “9” dialing prefix only to the PSTN number. Example 2 3xxT|1xxxxxxxxxx|[2-9]xxxxxxxxx|+x.T;match=2;pre="9"; match=3;pre="91";match=4;prestrip=1;pre="9011" Type of Match Result If User Presses Enter or Call Result if User Stops typing The input matches the pattern and the pattern does not include the T timer The transformation is performed. X-Lite attempts the call. Nothing happens even after the T timer has expired. The input matches the pattern and the pattern includes the T timer The transformation is performed. X-Lite attempts the call. The transformation is performed. X-Lite attempts the call. The input does not match the pattern No transformation is performed. X-Lite attempts the call. Nothing happens even after the T timer has expired. 3xxT The first pattern is any three-digit number beginning with 3. No transformation. The assumption is that this is an internal extension. The timer forces X-Lite to wait after detecting a three-digit number beginning with 3, in case you are actually dialing a local call starting with 3. 1xxxxxxxxxx The second pattern is any eleven-digit number beginning with 1. Prefix with 9 and dial as is. The assumption is that this is a long-distance PSTN call within North America (within North America, all long-distance calls start with 1). [2-9]xxxxxxxxx The third pattern is any ten-digit number beginning with a number other than 1. The assumption is that this is a local PSTN call within a ten-digit dialing zone. +x.T; The fourth pattern is a number of any length that begins with +, to indicate an international PSTN call from North America. Delete the +, prefix with 9011 (011 is the number to access an international line from North America). match=2;pre="9"; For the second pattern, prefix 9 to access an outside line. match=3;pre="91"; For the third pattern, prefix 9 and 1 to access an outside line and enter the long-distance code. match=4;prestrip=1; pre="9011" For the fourth pattern, remove the + and prefix 9011 to access an outside line and enter the international code.
- 60. CounterPath Corporation 56 C Location of Files C:Documents and Settings<user name>Local SettingsApplication DataCounterPath CorporationX-Lite C:Users<user name>AppDataLocalCounterPath CorporationX-Lite
- 61. X-Lite 4 for Windows User Guide 57 D Glossary AEC Acoustic echo cancellation. Processing of the audio or video signal to reduce the echo effect that can arise with a speakerphone or that can arise if the sound from the speakerphone or headphone leaks into the microphone. AGC Automatic gain control. Processing of the audio or video signal to adjust the microphone volume level so that the other party does not hear the distortion that might be caused by too high a microphone input or too low volume (due to too low input level). AVI Audio Video Interleave. A multimedia container format. AVI files contain both audio and video data in a standard container that allows simultaneous playback. Broadband Broad or wide bandwidth. In data transmission, the wider the band, the more data it is possible to transmit in a given time span. A cable, DSL and ADSL connection to the network provide broadband for data transmission. A dialup or ISDN connection typically provide a narrow bandwidth for data transmission. Codec The format by which audio or video streams are compressed for transmission over networks. Dial plan The rules that X-Lite follows in order to interpret the softphone address or phone number that the user has entered and to modify the number or address, as required, to ensure that the call will be placed successfully. DTMF Dual-tone multi frequency. DTMF is the system that is used in interactive voice- response menu systems such as the menu system for accessing voicemail messages. The DTMF system allows the user to interact with the menu by pressing keys on a dialpad or keyboard. HID Human interface device. In X-Lite, if the headset is HID-compliant, the user can configure the buttons on the device to invoke functions on X-Lite such as answering an incoming call. IM Instant Messaging. A technology that lets users send text message and files for near instantaneous delivery and display on each others’ computers. IP Internet Protocol. A data-oriented protocol used for communicating data across a network. IP is the most common protocol used on the internet. IP address A unique number that devices use in order to identify and communicate with each other on a computer network using the IP standard. Media In a VoIP phone call, the audio and video portion of the information in a call. Compare to “Signaling”. MWI Message Waiting Indicator. An indicator that there is a voicemail message for the owner of an account. Narrowband In data transmission, the wider the band, the more data it is possible to transmit in a given time span. A cable, DSL and ADSL connection to the network provide broadband for data transmission. A dialup or ISDN connection typically provide a narrow bandwidth for data transmission. Presence An instant messaging feature that allows users to share information about their availability, mood, location and so on. Proxy See SIP account. PSTN Public Switch Telephone Network. The traditional land-line phone network.
- 62. CounterPath Corporation 58 RFC Request for Comment. A document that describes an aspect of an internet technology. An RFC may be a proposed, draft or full internet standard. RTP Real-time Transport Protocol. A protocol for delivering the media portion of a data transmission over an IP network. SRTP is another media protocol. Signaling In a VoIP phone call, the information in a call that deals with establishing and controlling the connection, and managing the network. The non-signaling portion of the call is the Media. SIMPLE protocol Session Initiation Protocol for Instant Messaging and Presence Leveraging Extensions. The instant messaging (IM) protocol followed by X-Lite. It encapsulate the rules for exchanging instant messages. SIP Session Initiation Protocol. The signaling protocol followed by X-Lite for handling phone calls. SIP account An account that provides the user the ability to make VoIP phone calls. The account encapsulates the rules and functions the user can access. softphone address The address used to connect to a SIP endpoint. In other words, the “phone number” used in a VoIP phone call. For example, sip:joseph@domainA.com. SRTP Secure Real-time Transport Protocol. A protocol for delivering the media portion of a data transmission over an IP network. SRTP is a secure protocol, which means that the media is encrypted. RTP is another media protocol. TCP Transmission Control Protocol. A transport protocol for delivering data over an IP network. Other transport protocols are TLS and UDP. UDP User Datagram Protocol. A transport protocol for delivering data over an IP network. Another transport protocol is TCP. URI Uniform Resource Identifier. A name or address that identifies a location on the world wide web. A softphone address is a type of URI. URL Uniform Resource Locator. A URI that both identifies a name or address and indicates how to locate it. USB device Universal Serial Bus device. A device that follows a specific communications standard. A headset may be a “USB type” of headset. VAD Voice Activity Detection. A technology that detects if audio is a human voice or background noise. X-Lite includes a feature (Preserve bandwidth on the Network panel of the Preferences window) that controls whether audio is transmitted when VAD determines that no one is actually speaking. VoIP Voice over Internet Protocol. A variation of IP used for sending voice data over the internet, in other words, used for making phone calls over the internet. WAV Or WAVE. A file format standard for storing audio on PCs.