A826 Quick Start Guide
- 1. - 1 - Language English Version V1.0 Update Oct.2008 ……………………………………………… What’s on your package? One A-826 series card One companion ISA CD (V2.1 or later) One Quick Start Guide(This document) ……………………………………………… Installing Windows Driver Follow those steps: 1. Setup the Windows driver. You can get the driver from: CD:NAPDOSISAA826DLL http://ftp.icpdas.com/pub/cd/iocard/isa/napdos/isa/a826/dll/ 1 2 A-826PG Windows driver only support windows 98/NT/2000 and XP/2003/vista 32-bit versions.
- 2. - 2 - 2. Click button to start installation. 3. Click button to install driver into the default folder. 4. Click button to continue installation. 5. Select “NO, I will restart my computer later” and then click button. ……………………………………………… I/O Base Address & Interrupt Setting The base address is set from SW1 DIP switch on board: The Interrupt Level Setting 3 ON 1 2 3 4 5 6 A9 A8 A7 A6 A5 A4` BASE ADDR A9 A8 A7 A6 A5 A4 200-20F OFF ON ON ON ON ON 210-21F OFF ON ON ON ON OFF 220-22F( ) OFF ON ON ON OFF ON 230-23F OFF ON ON ON OFF OFF 240-24F OFF ON ON OFF ON ON 250-25F OFF ON ON OFF ON OFF 260-26F OFF ON ON OFF OFF ON 270-27F OFF ON ON OFF OFF OFF 280-28F OFF ON OFF ON ON ON : : : : : : : 2F0-2EF OFF ON OFF OFF OFF OFF 300-30F OFF OFF ON ON ON ON 310-31F OFF OFF ON ON ON OFF : : : : : : : 3F0-3FF OFF OFF OFF OFF OFF OFF ( ) : default base address is 0x220 SW1 : BASE ADDRESS IRQ 3 4 5 6 7 9 10 11 12 14 15 NC Interrupt 15 (default)
- 3. - 3 - ……………………………………………… Installing Hardware on PC Follow those steps: 1. Shut down and power off your computer 2. Remove all covers from the computer 3. Select an empty ISA slot 4. Carefully insert your I/O card into the ISA slot 5. Replace the PC covers 6. Power on the computer After powering-on the computer, continue next process. ……………………………………………… Adding Hardware 7. Add Hardware 7-1 Open the “Control Panel” by click the item “Start / Settings / Control Panel”. 7-2 Double-click the item “Add/Remove Hardware” and Click the “Next >” button. 7-3 Select the item “Add/Troubleshoot a device” and click the ““““Next >” button. 7-4 Select the item “Add a new device” and click the “Next >” button. 4 5 Adding hardware is used on Windows 2000/XP/2003/Vista 32 only. Windows 9X/Me/NT users can skip it.
- 4. - 4 - 7-5 Select the item “No, I want to select the hardware from a list” and click the “Next >” button. 7-6 Select the item “Other device” and click the “Next >” button. 7-7 Click the “Have Disk…” button. 7-8 Click the “Browse…” button to select the Inf file default path is D:DAQProA826_WIN2KInf and click the “OK” button. 7-9 Select the correct device from the “Models:” listbox and Click the “Next >” button. 7-10 The windows show to dialog box and Click the “OK” button to enter the device’s properties settings. 8. Modify the device properties 9. Reboot the PC The detail “add hardware” information. Please refer to CD:NAPDOSISAManualPCI_ISA_PnP_Driver_Installation_in_Win9x_2K_XP.pdf No devices are conflicting No devices are conflicting 1. Select Input/Output Range 3. Select Interrupt Request 2. Click “Change Setting” to change I/O Range (Depend on I/O Base Address) 4. Click “Change Setting” to change Interrupt Request. (Depend on Interrupt Level setting)
- 5. - 5 - ……………………………………………… Pin Assignments CN1,CN2 : Digital Input/Output Connector. CN3 : Analog input/Analog output/Timer/Counter Connector. The detail pin assignments information. Please refer to : CD:NAPDOSISA/A826/Manual/826.pdf http://ftp.icpdas.com/pub/cd/iocard/isa/napdos/isa/a826/manual/826.pdf 6 CN11 CN2
- 6. - 6 - ……………………………………………… Self-Test 1. Use CA-2002(Optional) to connect the CN1 with CN2. 2. Run the A-821 sample program. Get the file from(Default): C:DAQProA821_WINxxxDEMO 7 CN1 CN2 CN3
- 7. - 7 - 3. Check number of the A-826, and test DIO function. 4. Get DIO function test result. 1. The one A-826 had successfully installed to PC. 2. Select the board number for the A-826. It starts from 0. 3. Click this button to do DIO test. 4. Click the channel 0 、2、4、6 in the DO. 5. DI show to channel 0、 2、4、6 for high state. (Red light) Complete
- 8. - 8 - ……………………………………………… Additional Information A-826 Series Card Product page: http://www.icpdas.com/products/DAQ/pc_based/a-826pg.htm CA-2002(Optional) page: http://www.icpdas.com/products/Accessories/cable/cable_selection.htm Documents: CD:NAPDOSISAA826manual http://ftp.icpdas.com/pub/cd/iocard/isa/napdos/isa/a826/manual/ Software: CD:NAPDOSISAA826 http://www.icpdas.com/download/isa/a826/index.htm The ICP DAS Web Site http://www.icpdas.com Contact Us Service@icpdas.com Copyright ©2008 by ICP DAS Co., Ltd. All right are reserved 8 Technical support Supplies and ordering information Ways to enhance your device FAQ Application story