Tecnotion Ironless Vacuum Specs
0 likes29 views
This document provides specifications for two types of ironless synchronous motors: the UMV12 and ULV9. Key specifications include: - The UMV12 and ULV9 differ in winding type, maximum voltage, peak and continuous force, speed, electrical and thermal characteristics. - Electrical specifications include peak current, maximum continuous current, back EMF, resistance, and induction per phase. - Mechanical specifications cover coil unit weight, length, motor attraction force, and magnet pitch. - Additional details are provided on magnet yoke dimensions, outgassing capabilities, and manufacturer contact information.
Tecnotion Ironless Vacuum Specs
- 1. Ver.1.01 ©2013 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice. Parameter Remarks Symbol Unit UMV12 ULV9 Performance Winding type N S N S Motortype, max voltage ph-ph 3-phase synchronous Ironless, 300Vdc Peak Force @ 20°C/s magnet @ 25°C Fp N 400 720 Continuous Force* coils @ 110°C Fc N 20..80 45..150 Maximum Speed** @ 300 V vmax m/s 10 16 5 12 Motor Force Constant coils @ 25°C K N/Arms 36.3 19.9 68 27.5 Motor Constant coils @ 25°C S N2 /W 95 290 Electrical Peak Current magnet @ 25°C Ip Arms 11.0 20.0 10.6 26 Maximum Continous Current coils @ 110°C Ic Arms Back EMF Phase-Phase Peak Bemf Vdc / m/s 30 16 55.5 25.5 Resistance per Phase coils @ 25°C ex. cable Rf Ω 4.6 1.4 5.3 0.85 Induction per Phase I < 0.6 Ip Lf mH 1.5 0.4 4.2 0.7 Electrical Time Constant coils @ 25°C τe ms 0.3 0.8 Thermal Resistance Rth °C/W 0.6 1.0 Temperature Sensors NTC 10KΩ Mechanical Coil Unit Weight ex. cables M kg 0.330 0.720 Coil Unit Length ex. cables L mm 260 272 Motor Attraction Force Fa N 0 0 Magnet Pitch NN τ mm 30 42 Cable Weight m kg/m 0.060 0.060 ULV Magnet yoke dimensions Le (mm) 126 M5 bolts 6 Mass (kg/m) 13.6 Magnet yokes can be butted together. Vacuum Ironless Series UMV12 in 150mm magnet yoke shown Allspecifications±10% ** Actual values depend on bus voltage. Please check the F/V diagram in our simulation tool. * Depends on environmental conditions in the application. Lower values when depending on thermal radiation, upper values when using water cooling. UMV Magnet yoke dimensions Le (mm) 150 M4 bolts 5 Mass (kg/m) 6.7 Magnet yokes can be butted together. Outgassing Information and specifications concerning outgassing of the UMV and ULV series are available on request. Since these values depend on materials and environmental conditions, please contact us directly so we can advise you about your specific vacuum application. The knowledge and experience we’ve gained from designing and implementing custom vacuum motors for large OEMs enable us to provide a fitting solution for any application. Suited for pressures of 10-7 mbar and lower, due to: ■ Custom stainless steel coil unit housing ■ Special high vacuum cables ■ Low outgassing yoke design ■ Cleanroom manufacturing process ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By: