Tecnotion TB Series Specs
0 likes32 views
This document provides specifications for three linear motor models - the TB12, TB15, and TB30. It includes performance data like maximum force, speed, and current as well as electrical properties and mechanical dimensions. Mounting instructions and CAD files can be found online or in the installation manual. The TB series uses iron cores and is intended for use with magnet plates that can be butted together.
Tecnotion TB Series Specs
- 1. Ver.1.03 Approvals *** Production date October 2013 *** ©2013 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice. TBWTBTLTM Parameter Remarks Symbol Unit TB12 TB15 TB30 Performance Winding type N S N S N S Motortype, max voltage ph-ph 3-phase synchronous Iron core, 400Vac rms (600Vdc) Ultimate Force @ 10°C/s increase magnet @ 25°C Fu N 1800 2250 4500 Peak Force @ 6°C/s increase magnet @ 25°C Fp N 1600 2000 4000 Continuous Force* coils @ 100°C Fc N 760 950 1900 Maximum Speed** @ 560 V vmax m/s 3 6 2.5 6 2.5 6 Motor Force Constant mount. sfc. @ 20°C K N/Arms 186 93 225 93 225 93 Motor Constant coils @ 25°C S N2 /W 1750 2150 4300 Electrical Ultimate Current magnet @ 25°C Iu Arms 13.0 26 13.5 33 27 66 Peak Current magnet @ 25°C Ip Arms 10.0 20 10.0 25 20 50 Maximum Continuous Current coils @ 100°C Ic Arms 4.1 8.2 4.2 10.2 8.5 20.5 Back EMF Phase-Phasepeak Bemf V / m/s 152 76 183 76 183 76 Resistance per Phase* coils @ 25°C ex. cable Rf Ω 6.3 1.6 7.6 1.3 3.8 0.65 Induction per Phase I < 0.6 Ip Lf mH 51 13 60 10 30 5 Electrical Time Constant* coils @ 25°C τe ms 8 8 8 Thermal Maximum Continuous Power Loss all coils Pc W 430 530 1060 Thermal Resistance coils to mount. sfc. Rth °C/W 0.15 0.12 0.06 Thermal Time Constant* to max. coil temp. τth s 90 90 90 Temperature Cut-off / Sensor PTC 1kΩ / KTY83-122 Mechanical Coil Unit Weight ex. cables W kg 4.9 5.9 11.6 Coil Unit Length ex. cables L mm 244 290 562 Motor Attraction Force rms @ 0 A Fa N 3400 4150 8300 Magnet Pitch NN τ mm 24 24 24 Cable Mass m kg/m 0.3 0.3 0.3 Cable Type (Power) length 1 m d mm (AWG) 11.9 (14) Cable Type (Sensor) length 1 m d mm (AWG) 4.3 (26) Magnet plate dimensions Le (mm) 192 288 M5 bolts 8 12 Mass (kg/m) 10.5 Magnet plates can be butted together. TB Series Iron Core TB12 on 288mm magnet plate shown ** Actual values depend on bus voltage. Please check the F/V diagram in our simulation tool. Allspecifications±10% * These values are only applicable when the mounting surface is at 20°C and the motor is driven at maximum continuous current. If these values differ in your application, please check our simulation tool. TBWTBTLTM ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
- 2. Ver.1.03 TB12 244 64 64 64 16 TB30 80 80 80 32 80 80 80 16 O 6 for M5 DIN912 R 4.6 130 12 TB192mmTB288mm 48 48 48 88° 12 48 48 48 48 48 22 288 120 12.2 O 4.3 Thermal sensor cable 130 45±0.1 MountingHeight 41 16.8 Coil unit Magnet plate M5 (6.5 deep) 48 48 48 48 48 48 48 384 12 2xTB192mm 568 808080 290 16 38 TB15 24 38 O 11.9 Power cable 54 160 Hole O5 (6 deep) For Dowelpin DIN7 O5h8 Slotted Hole O5x0.5 (6 deep) For Dowelpin DIN7 O5h8 51 51 480 208 8 Hole O5 (3 deep) For Dowelpin DIN7 O5h8 (Optional use) Slotted Hole O5x0.5 (3 deep) For Dowelpin DIN7 O5h8 (Optional use) 168 192 14.2 14.2264 22 22 14.2168 192 168 65 60.5 60.5 MAGNET PLATES COIL UNITS 30 +1 -2 14 13 )peed3,x2(M 3 O 2 +0.05 0 (2x, 2.5 deep) Optional: Digital Hall Module 5.1 6.5 Mountinginstructionsandflatnessorparallelismrequirements canbefoundintheIronCoreinstallationmanual.CADfilesand 3Dmodelscanbedownloadedfromourwebsite. Cable lenght 1.2 m TBWTBTLTM ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By: