Note 4 physical layer ii (1) adsl1
- 1. 1 Kyung Hee University Chapter 9 Using Telephone and Cable Networks for Data Transmission
- 2. 2 Kyung Hee University 9.1 TELEPHONE NETWORK Telephone networks use circuit switching. The telephone network had its beginnings in the late 1800s. The entire network, which is referred to as the plain old telephone system (POTS), was originally an analog system using analog signals to transmit voice. Major Components LATAs Signaling Services Provided by Telephone Networks Topics discussed in this section:
- 3. 3 Kyung Hee University Figure 9.1 A telephone system • local loop connects subscriber to nearest end office, 1st 3 digits of phone number define the office, next four define the local loop number • trunks are the transmission media handling the communication between offices • switching office has switches that connects several local loops or trunks Telephone Networks : Major Components
- 4. 4 Kyung Hee University Figure 9.2 Switching offices in a LATA Telephone Networks LATA (Local –access Transport area)
- 5. 5 Kyung Hee University Figure 9.3 Point of presences (POPs) Telephone Networks
- 6. 6 Kyung Hee University Signaling The switches in the telephone company used the digital signals (telephone number) to create a connection between the caller and the called parties. In-band signaling The 4khz voice channel is used to provide signaling. The same circuit can be used for both signaling and voice communication. Out-band signaling A portion of the 4khz voice channel bandwidth is used for signaling. The voice bandwidth and the signaling bandwidth are separated.
- 7. 7 Kyung Hee University The tasks of data transfer and signaling are separated in modern telephone networks: data transfer is done by one network, signaling by another. Note Signaling
- 8. 8 Kyung Hee University Signaling Network The signaling network is a packet-switched network involving the layers in the OSI model or Internet model. For example, the information needed to convey a telephone address can easily be encapsulated in a packet with all the error control and addressing information. The signaling network is consisted of the SP, STP, SCP, and Data base.
- 9. 9 Kyung Hee University Figure 9.4 Data transfer and signaling networks Signaling Network
- 10. 10 Kyung Hee University Signaling system seven (SS7) The protocol that is used in the signaling network is called Signaling System Seven (SS7) Figure 9.5 Layers in SS7
- 11. 11 Kyung Hee University 9.2 DIAL-UP MODEMS Traditional telephone lines can carry frequencies between 300 and 3300 Hz, giving them a bandwidth of 3000 Hz. All this range is used for transmitting voice, where a great deal of interference and distortion can be accepted without loss of intelligibility. Modem Standards Topics discussed in this section:
- 12. 12 Kyung Hee University Dial-up modem Traditional, telephone lines can carry frequencies between 300 and 3300Hz, giving them a bandwidth of 3000 Hz. The effective bandwidth of a telephone line being used for data communication is 2400 Hz, covering the range from 600 and 3000 Hz. Figure 9.6 Telephone line bandwidth
- 13. 13 Kyung Hee University Modem stands for modulator/demodulator. Note Dial-up modem
- 14. 14 Kyung Hee University Modem The computer sends a digital signal to the modulator portion of the modem; the data sent as an analog signal on the telephone lines. The modem on the right receives the analog signal, demodulates it through its demodulator, and delivers data to the computer on the right. Figure 9.7 Modulation/demodulation
- 15. 15 Kyung Hee University Modem standards ITU V Series 32-QAM (V.32) with a baud rate of 2400 4 data bits x 2400 = 9600 bps 128-QAM (V.32bis) 6 data bits x 2400 baud = 14,400 bps Automatic fall-back, fall- forward feature enabling modem to adjust speed depending on line or signal quality
- 16. 16 Kyung Hee University Figure 9.9 Uploading and downloading in 56K modems Modem standards 33.6kbps 56kbps
- 17. 17 Kyung Hee University 9.3 DIGITAL SUBSCRIBER LINE After traditional modems reached their peak data rate, telephone companies developed another technology, DSL, to provide higher-speed access to the Internet. Digital subscriber line (DSL) technology is one of the most promising for supporting high-speed digital communication over the existing local loops. ADSL ADSL Lite HDSL SDSL VDSL Topics discussed in this section:
- 18. 18 Kyung Hee University Digital Subscriber Line (DSL) uses a newer technology that used the existing telecommunications networks such as the local loop telephone line. is an asymmetric communication technology designed for residential users; it is not suitable for business. xDSL: where x can be replaced by A, V, H, or S The existing local loops can handle bandwidths up to 1.1 MHz by removing the filter at the end of line of telephone company but, limitation because of distance between the residence and the switching office, size of cable ADSL is an adaptive technology. The system uses a date rate based on the condition of the local loop line
- 19. 19 Kyung Hee University DSL DMT Modulation technique that has become standard for ADSL is called the discrete multitone technique (DMT) which combines QAM and FDM.
- 20. 20 Kyung Hee University DSL voice : channel 0 is reserved for voice Idle : channel 1 to 5 are not used; gap between voice and data communication Upstream data and control : channels 6 to 30 (25channels); one channel for control Downstream data and control : channels 31 to 255(225 channels); 13.4 Mbps; one channel for control
- 21. 21 Kyung Hee University Figure 9.11 Bandwidth division in ADSL DSL
- 22. 22 Kyung Hee University Figure 9.12 ADSL modem – customer site DSL
- 23. 23 Kyung Hee University Figure 9.13 DSLAM – Telephone company site DSL DSLAM (Digital Subscriber Line Access Multiplexer)
- 24. 24 Kyung Hee University Table 9.2 Summary of DSL technologies DSL
- 25. 25 Kyung Hee University 9.4 CABLE TV NETWORKS The cable TV network started as a video service provider, but it has moved to the business of Internet access. In this section, we discuss cable TV networks per se; in Section 9.5 we discuss how this network can be used to provide high-speed access to the Internet. Traditional Cable Networks Hybrid Fiber-Coaxial (HFC) Network Topics discussed in this section:
- 26. 26 Kyung Hee University Cable Modem Traditional cable Networks community antenna TV (CATV) Communication in the traditional cable TV network is unidirectional.
- 27. 27 Kyung Hee University Cable Modem HFC Network RCH : Regional cable head; serving 400,000 subscribers; Distribution hub: serving 40,000 subscribers Coaxial cable : serving 1,000 subscribers Communication in HFC cable TV network can be bidirectional.
- 28. 28 Kyung Hee University Communication in an HFC cable TV network can be bidirectional. Note Cable Modem
- 29. 29 Kyung Hee University 9.5 CABLE TV FOR DATA TRANSFER Cable companies are now competing with telephone companies for the residential customer who wants high- speed data transfer. In this section, we briefly discuss this technology. Bandwidth Sharing CM and CMTS Data Transmission Schemes: DOCSIS Topics discussed in this section:
- 30. 30 Kyung Hee University Cable Modem Bandwidth Video band 54 to 550 MHz TV channels : 6 Mhz x 80 channels
- 31. 31 Kyung Hee University Cable Modem Data downstream band : dividing into 6Mhz channels Modulation Downstream data are modulated using 64-QAM Data rate 6 bits for each baud in 64-QAM (1bit : control bit) Theoretically, 5bits/Hz x 6 Mhz = 30 Mbps Upstream data band Modulation upstream data band uses lower frequencies that are more susceptible to noise and interference for this reason, using QPSK instead of QAM Theoretical data rate : 2 bits/hz x 6 Mhz = 12 Mbps
- 32. 32 Kyung Hee University Cable Modem The Cable Modem (CM) is installed on the subscriber premises. Figure 9.17 Cable modem (CM)
- 33. 33 Kyung Hee University Cable Modem Cable modem transmission system (CMTS) The CMTS is installed inside the distribution hub by the cable company. Mbps Figure 9.18 Cable modem transmission system (CMTS)
- 34. 34 Kyung Hee University Data transmission Schemes (DOCIS) DOCIS (Data Over Cable System Interface Specification) defines all the protocols necessary to transport data from a CMTS to a CM. Upstream Communication It describes the steps that must be followed by a CM. Downstream Communication There is no contention because there is only one sender. The CMTS sends the packet with the address of the receiving CM, using the allocated downstream channel.
- 35. 35 Kyung Hee University Summary (1) The telephone, which is referred to as the plain old telephone system (POTS), was originally an analog system. During the last decade, the telephone network has undergone many technical changes. The network is now digital as well as analog. The telephone network is made of three major components: local loops, trunks, and switching offices. It has several levels of switching offers such as end offices, tandem offices, and regional offices.
- 36. 36 Kyung Hee University Summary (2) Telephone companies developed another technology, digital subscriber line (DSL), to provide higher-speed access to the Internet Community antenna TV (CATV) was originally designed to provide video services for the community. The traditional cable TV system used coaxial cable end to end. The second generation of cable networks is called a hybrid fiber-coaxial (HFC) network. The network uses a combination of fiber-optic and coaxial cable.