Remote control system of high efficiency and intelligent street lighting using a zigbee network of devices and sensors
Download as DOCX, PDF2 likes3,335 views
This document proposes a remote-controlled street lighting system using a Zigbee wireless network and sensors. It aims to optimize management and efficiency by allowing control and monitoring of street lamps from a central terminal. Sensors would detect light levels and human movement to automatically control the lamps. Information is transmitted using Zigbee devices to reduce energy waste and human effort compared to existing constant lighting systems. The proposed system includes a microcontroller, Zigbee modules, sensors, and software to allow wireless remote operation and monitoring of street lights.
Remote control system of high efficiency and intelligent street lighting using a zigbee network of devices and sensors
- 1. REMOTE-CONTROL SYSTEM OF HIGH EFFICIENCY AND INTELLIGENT STREET LIGHTING USING A ZIGBEE NETWORK OF DEVICES AND SENSORS ABSTRACT The proposed remote-control systems can optimize management and efficiency of street lighting systems. It uses ZIGBEE-based wireless devices which enable more efficient street Lamp-system management, thanks to an advanced interface and control architecture. It uses a sensor combination to control and guarantee the desired system parameters; the information is transferred point by point using ZIGBEE transmitters and receivers and is sent to a control terminal used to check the state of the street lamps and to take appropriate measures in case of failure. EXISTING SYTEM The existing system for this paper is common in all streets. The street light system is the present module we are using. But in this method, there is a loss of heavy electricity in the whole night. If the street light is not stopped after the night, the loss will continue throughout the day. And also the street light is not necessary when there is no human movements in the street. So to come out of these disadvantages this paper is introducing a ZIGBEE based street lighting system. PROPOSED SYTEM In this paper we propose the ZIGBEE based street lighting system. An application will be created for this particular system and by using this application the street light can be operated wirelessly by using ZIGBEE. Whenever the human movements will be occurred beyond the street light then the light will be automatically controlled. After the sunlight has been reduced in the street, then the street light will glow by using a light sensor.
- 2. By using this project, wastage of electricity will be reduced and human effect also reduced. BLOCK DIAGRAM: Sensors of Street Light Human Detection Power Calculator RELAY LIGHT ZIGBEE Light Sensor ZIGBEE ARMMICROCONTROLLER PC (VB.NET) GPRS Wireless Transmission Module GPRS Wireless Transmission Module
- 3. HARDWARE REQUIREMENTS 1. Microcontroller 2. ZIGBEE 3. Light sensor 4. Human detection sensor 5. Power supply SOFTWARE REQIREMENTS 6. AVR Studio 4 7. Visual Studio 8. Flash magic 9. Win AVR.