2
Most read
4
Most read
6
Most read
Chapter No. 7 Circular Motion Page 1
CHAPTER NO.7
CIRCULAR MOTION
7.1 Projectile Motion (an example of circular motion)
Terms:
7.1.1 Projectile (Nothing but particle):
It is a particle or object projected in the space at an inclination to the direction of gravity, moving
under the combined effect of vertical and horizontal forces.
1) Trajectory:
It is a path, traced by a projectile in the space.
2) Point of Projection:
It is the initial point of the particle (see Fig. 1 Point A)
3) Angle of inclination or Projection:
The angle, with a horizontal, at which a projectile is projected (see Fig. 1)
4) Horizontal Range or Range (R) :
The distance between the point of projection and the point where projectile strikes the
ground (see Fig. 1)
5) Time of Flight:
The total time taken by the projectile, to reach the maximum height i.e. hmax and to return
back to the ground.
6) Velocity of projection:
The velocity with which, a projectile is projected (see Fig. 1)
Chapter No. 7 Circular Motion Page 2
Fig. 1
7.2 Study of a projectile:
1) Generally, the velocity of the projection ‘u’ split up in to or resolved into two
components ‘u cos α’ and ‘u sin α’.
i. e. Vertical component V = u sin α
and Horizontal component H = u cos α
2) The component in vertical direction is subjected to retardation due to gravity. Therefore,
this vertical velocity ‘u sin α’ is subjected to retardation for first half of trajectory before
attaining maximum height i.e. hmax and for second half it is subjected to acceleration due
to gravity, before coming to rest.
3) The component in horizontal direction, there is no retardation or acceleration due to
gravity. Therefore, this horizontal velocity ‘u cos α’ is remain constant throughout the
motion.
For first half of trajectory ---------- {
𝑣 = 𝑢 sin 𝛼 − 𝑔𝑡
𝑣2
= 𝑢2
sin2
𝛼 − 2𝑔𝑠
𝑠 = ( 𝑢sin 𝛼 ) 𝑡 − (
1
2
𝑔 𝑡2
)
Chapter No. 7 Circular Motion Page 3
For second half of trajectory ---------- {
𝑣 = 𝑢 sin 𝛼 + 𝑔𝑡
𝑣2
= 𝑢2
sin2
𝛼 + 2𝑔𝑠
𝑠 = ( 𝑢 sin 𝛼 ) 𝑡 + (
1
2
𝑔 𝑡2
)
4) Thus, the time taken by the body or particle or projectile to reach the ground, is
calculated by vertical component (u sin α ) of the velocity and the horizontal component
of the velocity ( u cos α).
5) Mathematically,
[
𝐻𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙 𝑅𝑎𝑛𝑔𝑒 ( 𝑅)
𝑜𝑟
𝐻𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙 𝐷𝑖𝑠𝑡𝑎𝑛𝑐𝑒
] = [
𝐶𝑜𝑛𝑠𝑡𝑎𝑛𝑡 𝐻𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦
(𝑢 cos 𝛼 )
] 𝑥 [
𝑇𝑖𝑚𝑒
(𝑡)
]
Fig. 2
7.3 Derivation of the expression or equation for the path of a projectile:
Consider a particle projected upward from point A, at an angle α, with the horizontal, with an
initial velocity u m/s as shown in Fig. 1 below.
Now, the velocity of projection u can be split up into two components i.e. u cos α and u sin α.
Chapter No. 7 Circular Motion Page 4
Fig. 3
Consider any point as the position of the particle, after time t seconds with co-ordinates x and y
as shown in Fig. 1
𝑦 = ( 𝑢sin 𝛼 ) 𝑡 − (
1
2
𝑔 𝑡2
) ------------------- (1)
And 𝑥 = ( 𝑢 cos 𝛼 ) 𝑡 ----------- (2)
Therefore, 𝑡 =
𝑥
𝑢 cos 𝛼
Substituting in (1)
𝑦 = ( 𝑢sin 𝛼 )
𝑥
𝑢 cos 𝛼
− (
1
2
𝑔
𝑥2
𝑢2 cos2 𝛼
)
𝑦 = 𝑥 tan 𝛼 −
𝑔 𝑥2
2 𝑐𝑜𝑠2 𝑢2
---------- (3)
Equation (3) is known as equation of trajectory
7.4 Derivation of expression for the time of flight of the projectile on a horizontal plane:
We have, 𝑠 = 𝑢𝑡 +
1
2
𝑎 𝑡2
Chapter No. 7 Circular Motion Page 5
𝑦 = ( 𝑢sin 𝛼 ) 𝑡 − (
1
2
𝑔 𝑡2
) ------------------- (1)
i.e. s = y, u = u sin α and a = g
When the projectile p is at point B, y = 0
Substituting, the value of y in eqn (1)
0 = ( 𝑢 sin 𝛼 ) 𝑡 − (
1
2
𝑔 𝑡2
)
( 𝑢 sin 𝛼 ) 𝑡 = (
1
2
𝑔 𝑡2
)
( 𝑢sin 𝛼 ) = (
1
2
𝑔 𝑡)
𝑡 =
2 𝑢sin 𝛼
𝑔
i.e. 1) time required to reach the maximum height
𝑡
2
=
𝑢 sin 𝛼
𝑔
Chapter No. 7 Circular Motion Page 6
7.5 Derivation of the expression for horizontal range (R) of the projectile:
We know,
Horizontal component of velocity = u cos α
And
Time of flight,
𝑡 =
2 𝑢sin 𝛼
𝑔
Therefore,
[Horizontal range ] = [ 𝐻𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦] 𝑥 [Time of flight]
= [u cos α] 𝑥 [
2 𝑢 sin 𝛼
𝑔
]
𝑅 =
sin 2 𝛼 𝑢2
𝑔
Note:
The range will be maximum when sin 2α = 1
Chapter No. 7 Circular Motion Page 7
2α = 900
α = 450
Rmax =
𝑢2
𝑔
7.6 Derivation of expression for the maximum height of a projectile on a horizontal plane:
We have, the vertical component of initial velocity u is
v = u sin α
and vertical component of final velocity
v = 0
Therefore,
Average velocity =
𝑢 sin 𝛼+0
2
=
𝑢 sin 𝛼
2
Now,
[ 𝑣𝑒𝑟𝑡𝑖𝑐𝑎𝑙 𝑑𝑖𝑠𝑡𝑎𝑛𝑐𝑒] = [ 𝐴𝑣𝑒𝑟𝑎𝑔𝑒 𝑣𝑒𝑟𝑡𝑖𝑐𝑎𝑙 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦] x [ 𝑡𝑖𝑚𝑒]
Chapter No. 7 Circular Motion Page 8
=
𝑢 sin 𝛼
2
𝑥
𝑢 sin 𝛼
𝑔
=
𝑠𝑖𝑛2
𝛼 𝑢2
2 𝑔
Where,
𝑢 sin 𝛼
𝑔
= is the time required by the projectile to reach the maximum height
H =
𝑠𝑖𝑛2 𝛼 𝑢2
2 𝑔
Questions:-
1. A projectile is fired upwards at an angle of 300 with a velocity of 40 m/s. Calculate the
time taken by the projectile to reach the ground after firing.
2. If a particle is projected inside a horizontal tunnel which is 5 m high with a velocity of
60 m/s, find the angle of projection and the greatest possible range.
3. The range of projectile on a horizontal plane is 240 m and the time of flight is 8 sec. Find
the initial velocity and the angle of projection.
4. A body is projected at such an angle that the horizontal range is three times the greatest
height. Find the angle of projection.
5. Find the least initial velocity which a projectile may have, so that it may clear a wall 3.6
m high and 4.8 m distant (from the point of projection) and strike the horizontal plane
through the foot of the wall at a distance 3.6 m beyond the wall. The point of projection is
at the same level as the wall.
6. Find the angle of projection at which the horizontal range and the maximum height of a
projectile are equal. May 2010 (06 MKS)
7. A particle is projected in air with a velocity 100 m/s and at an angle of 300 with the
horizontal. Find:
1) The horizontal range
2) The maximum height by the particle
3) And the time of flight
Ans: R = 882.8 m, Hmax = 127.42 m, t = 10.19 sec
Chapter No. 7 Circular Motion Page 9
8. A projectile is fired with an initial velocity of 250 m/s at a target located at a horizontal
distance of 4 km and the vertical distance of 700 m above the gun. Determine the value of
firing angle to hit the target. (Neglect air resistance).
Ans: α = 68.820 and 31.080
9. A projectile is aimed to a mark on a horizontal plane through the point of projection and
fall 12 m short of the mark and with an angle of projection 150. While it overshoots the
mark by 24 m when the angle of projection to hit the mark. Assume no air resistance.
Take the velocity of projection is constant in all cases.
Ans: R = 48 m, u = 26.57 m, α = 20.550
Case I) Projectile projected horizontally from certain height
a) Considering vertical motion of projectile
We have,
S = 𝐮𝐭 +
𝟏
𝟐
𝐚𝐭 𝟐
Here,
S = y = vertically downward displacement
u = initial velocity = u sin α = 0
a = acceleration due to gravity = g = 9.81 m/s2
∴ y =
𝟏
𝟐
𝐠 𝐭 𝟐
---------- (1)
b) Considering horizontal motion of projectile
[Horizontal range ] = [ 𝐻𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦] 𝑥 [Time of flight]
x = u x t --------- (2)
Chapter No. 7 Circular Motion Page 10
Problems:
1) An aircraft moving horizontally at a speed of 1000 kmph at a height of 1500 m releases a
bomb which hits the target.
Find:
1) Time required for the bomb to reach the target on ground
2) The horizontal distance of the aircraft from the target when it releases the
bomb. (May 2007 8 MKS)
Ans: t = 17.49 sec and x = 4857.66 m
2) Solve the same problem when y = 2000 m and u = 150 m/s.
Ans: t = 20.2 sec and x = 3030m
3) Find out u = ? when y = 100 m and x = 200 m
Ans: t = 4.515 sec and u = 44.3 m/s
4) Find y = ? and u = ? when time required to strike the ground is 15 sec when x = 50 m.
Ans: y = 1103.625 m and u = 3.33 m/s
5) A person wants to jump over a ditch as shown in Fig. below. Find the max. velocity with
which he should jump? (May 2006 6 MKS)
Ans: t = 0.638 sec and u = 4.702 m/s
Chapter No. 7 Circular Motion Page 11
Case II) Projectile projected at an angle α from certain height (say y)
a) Considering vertical motion of projectile
We have,
S = 𝐮𝐭 +
𝟏
𝟐
𝐚𝐭 𝟐
Here,
S = y = vertically downward displacement
u = initial vertical velocity = u sin α = 0
a = acceleration due to gravity = g = 9.81 m/s2
∴ − y = (u sin α) –
𝟏
𝟐
𝐠 𝐭 𝟐
y = - (u sin α) +
𝟏
𝟐
𝐠 𝐭 𝟐
---------- (1)
b) Considering horizontal motion of projectile
[Horizontal range ] = [ 𝐻𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦] 𝑥 [Time of flight]
x = u cos α x t --------- (2)
Velocity with which it strikes the ground (VB):
VB = u = initial velocity
Chapter No. 7 Circular Motion Page 12
VH = u cos α
VV = u sin α
We have,
𝐯 = 𝐮 + 𝐚𝐭
-VV = u sin α – gt
VV = -u sin α + gt
VB = √ 𝑽 𝑯
𝟐
+ 𝑽 𝑽
𝟐
--------------- (velocity of hit)
Direction of hit:
θ = tan-1 (
𝑽 𝑽
𝑽 𝑯
) ------------ (with the horizontal)
Problems:
1. A body is projected from the top of the tower 40 m high and strikes the ground after 10
seconds at a point 400 m from the base of the tower. Determine the velocity and angle of
projection. Also determine the maximum height attained by the body above ground level.
Dec. 2009 (10 MKS)
Ans: u = 60.24 m/s and Hmax = 143.43 m
2. A cricket ball is thrown by a fielder from a height of 2 , at an angle of elevation 300 to the
horizontal with an initial velocity of 20 m/s, hits the wickets at a height of 0.5 m from the
ground. How far the fielder from the wicket? (May 2004 12 MKS)
Ans: t = 2.181 sec, x = 37.77 m
3. A solider fires a bullet at an angle of elevation 300 from his position on the top of hill to
strike a target which is 60 m lower than the position of the solider. The initial velocity of
the bullet is 75 m/s. Calculate:
a) Hmax to which bullet rise above horizontal
b) The actual velocity with which it will strike the target
c) Total time required by for the flight of the bullet
Chapter No. 7 Circular Motion Page 13
Ans: Hmax = 131.74 m, t = 9.01 sec, vB = 82.456 m/s, θ = 38.020
4. A projectile fired from the edge of a 150 m high cliff with an initial velocity of 180 m/s at
an angle of elevation of 300 with the horizontal. Neglecting air resistance. Find:
1) The greatest elevation above the ground reached by the projectile and
2) Horizontal distance from gun to the point, where the projectile strikes the ground.
Ans: Hmax = 563.3 m, t = 19.9 sec, R = 3.012 km
Case III) Projectile projected at an angle α from certain height to the downward (say y)
c) Considering vertical motion of projectile
We have,
S = 𝐮𝐭 +
𝟏
𝟐
𝐚𝐭 𝟐
Here,
S = - y = vertically downward displacement
u = initial vertical velocity = - u sin α
a = acceleration due to gravity = - g = 9.81 m/s2
∴ − y = ( - u sin α) –
𝟏
𝟐
𝐠 𝐭 𝟐
y = (u sin α) +
𝟏
𝟐
𝐠 𝐭 𝟐
---------- (1)
d) Considering horizontal motion of projectile
[Horizontal range ] = [ 𝐻𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦] 𝑥 [Time of flight]
Chapter No. 7 Circular Motion Page 14
x = u cos α x t --------- (2)
Velocity with which it strikes the ground (VB):
VB = u = initial velocity
VH = u cos α
VV = u sin α
We have,
𝐯 = 𝐮 + 𝐚𝐭
-VV = - u sin α – gt
VV = u sin α + gt
VB = √ 𝑽 𝑯
𝟐
+ 𝑽 𝑽
𝟐
--------------- (velocity of hit)
Direction of hit:
θ = tan-1 (
𝑽 𝑽
𝑽 𝑯
) ------------ (with the horizontal)
Problems:
1) A stone is thrown from the top of the tower 30 m high at an angle of 400 with horizontal
with velocity 40 kmph. Find when and where the stone will hit a horizontal ground. Also
find the velocity and direction of striking.
Ans: t = 1.85 sec, x = 15.74 m, Vb = 26.67 m/s, θ = 71.390

More Related Content

DOC
MOMENT OF INERTIA
PDF
Parallel axis theorem and their use on Moment Of Inertia
PPT
Mekanika Benda Langit (TPOA 2013).ppt
PPTX
Two Dimensional Motion and Vectors
PPTX
Force & Equilibrium
DOCX
Projectile motion
PPTX
Projecctile motion by sanjeev
PDF
Statically-Indeterminate-Beams-.pdf
MOMENT OF INERTIA
Parallel axis theorem and their use on Moment Of Inertia
Mekanika Benda Langit (TPOA 2013).ppt
Two Dimensional Motion and Vectors
Force & Equilibrium
Projectile motion
Projecctile motion by sanjeev
Statically-Indeterminate-Beams-.pdf

What's hot (20)

PDF
Deflection in beams 1
PPTX
Parallelogram Law Force | Civil Engineering
PDF
Combined bending and direct stresses
PPT
Center Of Mass
ODP
Equations of motion
PPTX
DYNAMIC RESPONSE OF SIMPLE SUPPORTED BEAM VIBRATED UNDER MOVING LOAD
PPTX
Kinematics in Engineering Mechanics
PDF
Mohrs circle
PPTX
A presentation on shear stress (10.01.03.139)
PPTX
Acceleration and Equations of Motion(1st)
PPTX
PPT
Physics projectile motion
PPT
Engineering Mechanics Chapter 5 Equilibrium of a Rigid Body
PPTX
Mohr Circle.pptx
PDF
PPTX
Physics equations of motion
PDF
Projectile
PDF
Structural Analysis 8th Edition Solutions Manual
PPT
Engineering Mechanics Fundamentals
PDF
Sheet 1 pressure measurments
Deflection in beams 1
Parallelogram Law Force | Civil Engineering
Combined bending and direct stresses
Center Of Mass
Equations of motion
DYNAMIC RESPONSE OF SIMPLE SUPPORTED BEAM VIBRATED UNDER MOVING LOAD
Kinematics in Engineering Mechanics
Mohrs circle
A presentation on shear stress (10.01.03.139)
Acceleration and Equations of Motion(1st)
Physics projectile motion
Engineering Mechanics Chapter 5 Equilibrium of a Rigid Body
Mohr Circle.pptx
Physics equations of motion
Projectile
Structural Analysis 8th Edition Solutions Manual
Engineering Mechanics Fundamentals
Sheet 1 pressure measurments
Ad

Similar to Chapter no. 7 projectile (20)

DOCX
Projectile Motion
PPTX
Projectile
PDF
Physics 1_LESSON 2 (Mid_Spring 24-25).pdf
PPTX
Projectile-Motion..pptx
PPT
Physics 504 Chapter 10 Uniformly Accelerated Rectilinear Motion
PPT
Introduction to linear kinematics
PDF
chapter2.2-projectiledampresentation.pdf
PPTX
Presentation on Projectile Motion AIUB Physics
PDF
18 dynamics applications of derivative -
PPTX
Projectile Motion - Vertical and Horizontal
PPTX
phy lab 1 projectile.pptxphy lab 1 projectile.pptx
PPTX
Diploma sem 2 applied science physics-unit 4-chap-1 projectile motion
PPTX
Ch 12 (4) Curvilinear Motion X-Y Coordinate.pptx
PPTX
Kinematics questions
PPTX
projectile motion grade 9-170213175803.pptx
PDF
chapter 2_Projectile_Motion final (1) (1).pdf
DOCX
Physics 2 LT3: Projectile Motion Solutions
PPTX
PROJECTILE MOTION
PPT
Physics class Introduction to Projectile motion
PDF
ilide.info-motion-in-two-dimension-pr_d38aadd2be4949ed06275d8691959e74.pdf
Projectile Motion
Projectile
Physics 1_LESSON 2 (Mid_Spring 24-25).pdf
Projectile-Motion..pptx
Physics 504 Chapter 10 Uniformly Accelerated Rectilinear Motion
Introduction to linear kinematics
chapter2.2-projectiledampresentation.pdf
Presentation on Projectile Motion AIUB Physics
18 dynamics applications of derivative -
Projectile Motion - Vertical and Horizontal
phy lab 1 projectile.pptxphy lab 1 projectile.pptx
Diploma sem 2 applied science physics-unit 4-chap-1 projectile motion
Ch 12 (4) Curvilinear Motion X-Y Coordinate.pptx
Kinematics questions
projectile motion grade 9-170213175803.pptx
chapter 2_Projectile_Motion final (1) (1).pdf
Physics 2 LT3: Projectile Motion Solutions
PROJECTILE MOTION
Physics class Introduction to Projectile motion
ilide.info-motion-in-two-dimension-pr_d38aadd2be4949ed06275d8691959e74.pdf
Ad

More from Pralhad Kore (20)

PPTX
Transportation engineering
DOCX
Chapter wise question papers_bce
PPTX
Design of staircase_practical_example
PPTX
Presentation "Use of coupler Splices for Reinforcement"
PDF
Guidelines_for_building_design
PDF
Strength of materials_I
PPTX
Presentation_on_Cellwise_Braced_frames
DOCX
Study of MORT_&_H
DOCX
List of various_IRCs_&_sps
PDF
Analysis of multi storey building frames subjected to gravity and seismic loa...
PDF
Seismic response of _reinforced_concrete_concentrically_a_braced_frames
PDF
Use of mechanical_splices_for_reinforcing_steel
PDF
Guide lines bridge_design
PPSX
Dissertation report
PDF
Seismic response of cellwise braced reinforced concrete frames
PPSX
Water Management
PDF
Chaper wise qpapers_bce
DOCX
Basic Loads Cases
DOCX
Earthquake analysis by Response Spectrum Method
DOCX
Earthquake analysis by psudeo static method
Transportation engineering
Chapter wise question papers_bce
Design of staircase_practical_example
Presentation "Use of coupler Splices for Reinforcement"
Guidelines_for_building_design
Strength of materials_I
Presentation_on_Cellwise_Braced_frames
Study of MORT_&_H
List of various_IRCs_&_sps
Analysis of multi storey building frames subjected to gravity and seismic loa...
Seismic response of _reinforced_concrete_concentrically_a_braced_frames
Use of mechanical_splices_for_reinforcing_steel
Guide lines bridge_design
Dissertation report
Seismic response of cellwise braced reinforced concrete frames
Water Management
Chaper wise qpapers_bce
Basic Loads Cases
Earthquake analysis by Response Spectrum Method
Earthquake analysis by psudeo static method

Recently uploaded (20)

PPTX
Module 8- Technological and Communication Skills.pptx
PPTX
tack Data Structure with Array and Linked List Implementation, Push and Pop O...
DOC
T Pandian CV Madurai pandi kokkaf illaya
PDF
Exploratory_Data_Analysis_Fundamentals.pdf
PDF
Design of Material Handling Equipment Lecture Note
PDF
LOW POWER CLASS AB SI POWER AMPLIFIER FOR WIRELESS MEDICAL SENSOR NETWORK
PDF
UEFA_Carbon_Footprint_Calculator_Methology_2.0.pdf
PPTX
Chapter 2 -Technology and Enginerring Materials + Composites.pptx
PPTX
Amdahl’s law is explained in the above power point presentations
PPTX
Information Storage and Retrieval Techniques Unit III
PPTX
A Brief Introduction to IoT- Smart Objects: The "Things" in IoT
PDF
20250617 - IR - Global Guide for HR - 51 pages.pdf
PPTX
CONTRACTS IN CONSTRUCTION PROJECTS: TYPES
PPTX
PRASUNET_20240614003_231416_0000[1].pptx
PDF
Applications of Equal_Area_Criterion.pdf
PPTX
Petroleum Refining & Petrochemicals.pptx
PPTX
CyberSecurity Mobile and Wireless Devices
PDF
August 2025 - Top 10 Read Articles in Network Security & Its Applications
PDF
Accra-Kumasi Expressway - Prefeasibility Report Volume 1 of 7.11.2018.pdf
PDF
Computer System Architecture 3rd Edition-M Morris Mano.pdf
Module 8- Technological and Communication Skills.pptx
tack Data Structure with Array and Linked List Implementation, Push and Pop O...
T Pandian CV Madurai pandi kokkaf illaya
Exploratory_Data_Analysis_Fundamentals.pdf
Design of Material Handling Equipment Lecture Note
LOW POWER CLASS AB SI POWER AMPLIFIER FOR WIRELESS MEDICAL SENSOR NETWORK
UEFA_Carbon_Footprint_Calculator_Methology_2.0.pdf
Chapter 2 -Technology and Enginerring Materials + Composites.pptx
Amdahl’s law is explained in the above power point presentations
Information Storage and Retrieval Techniques Unit III
A Brief Introduction to IoT- Smart Objects: The "Things" in IoT
20250617 - IR - Global Guide for HR - 51 pages.pdf
CONTRACTS IN CONSTRUCTION PROJECTS: TYPES
PRASUNET_20240614003_231416_0000[1].pptx
Applications of Equal_Area_Criterion.pdf
Petroleum Refining & Petrochemicals.pptx
CyberSecurity Mobile and Wireless Devices
August 2025 - Top 10 Read Articles in Network Security & Its Applications
Accra-Kumasi Expressway - Prefeasibility Report Volume 1 of 7.11.2018.pdf
Computer System Architecture 3rd Edition-M Morris Mano.pdf

Chapter no. 7 projectile

  • 1. Chapter No. 7 Circular Motion Page 1 CHAPTER NO.7 CIRCULAR MOTION 7.1 Projectile Motion (an example of circular motion) Terms: 7.1.1 Projectile (Nothing but particle): It is a particle or object projected in the space at an inclination to the direction of gravity, moving under the combined effect of vertical and horizontal forces. 1) Trajectory: It is a path, traced by a projectile in the space. 2) Point of Projection: It is the initial point of the particle (see Fig. 1 Point A) 3) Angle of inclination or Projection: The angle, with a horizontal, at which a projectile is projected (see Fig. 1) 4) Horizontal Range or Range (R) : The distance between the point of projection and the point where projectile strikes the ground (see Fig. 1) 5) Time of Flight: The total time taken by the projectile, to reach the maximum height i.e. hmax and to return back to the ground. 6) Velocity of projection: The velocity with which, a projectile is projected (see Fig. 1)
  • 2. Chapter No. 7 Circular Motion Page 2 Fig. 1 7.2 Study of a projectile: 1) Generally, the velocity of the projection ‘u’ split up in to or resolved into two components ‘u cos α’ and ‘u sin α’. i. e. Vertical component V = u sin α and Horizontal component H = u cos α 2) The component in vertical direction is subjected to retardation due to gravity. Therefore, this vertical velocity ‘u sin α’ is subjected to retardation for first half of trajectory before attaining maximum height i.e. hmax and for second half it is subjected to acceleration due to gravity, before coming to rest. 3) The component in horizontal direction, there is no retardation or acceleration due to gravity. Therefore, this horizontal velocity ‘u cos α’ is remain constant throughout the motion. For first half of trajectory ---------- { 𝑣 = 𝑢 sin 𝛼 − 𝑔𝑡 𝑣2 = 𝑢2 sin2 𝛼 − 2𝑔𝑠 𝑠 = ( 𝑢sin 𝛼 ) 𝑡 − ( 1 2 𝑔 𝑡2 )
  • 3. Chapter No. 7 Circular Motion Page 3 For second half of trajectory ---------- { 𝑣 = 𝑢 sin 𝛼 + 𝑔𝑡 𝑣2 = 𝑢2 sin2 𝛼 + 2𝑔𝑠 𝑠 = ( 𝑢 sin 𝛼 ) 𝑡 + ( 1 2 𝑔 𝑡2 ) 4) Thus, the time taken by the body or particle or projectile to reach the ground, is calculated by vertical component (u sin α ) of the velocity and the horizontal component of the velocity ( u cos α). 5) Mathematically, [ 𝐻𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙 𝑅𝑎𝑛𝑔𝑒 ( 𝑅) 𝑜𝑟 𝐻𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙 𝐷𝑖𝑠𝑡𝑎𝑛𝑐𝑒 ] = [ 𝐶𝑜𝑛𝑠𝑡𝑎𝑛𝑡 𝐻𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦 (𝑢 cos 𝛼 ) ] 𝑥 [ 𝑇𝑖𝑚𝑒 (𝑡) ] Fig. 2 7.3 Derivation of the expression or equation for the path of a projectile: Consider a particle projected upward from point A, at an angle α, with the horizontal, with an initial velocity u m/s as shown in Fig. 1 below. Now, the velocity of projection u can be split up into two components i.e. u cos α and u sin α.
  • 4. Chapter No. 7 Circular Motion Page 4 Fig. 3 Consider any point as the position of the particle, after time t seconds with co-ordinates x and y as shown in Fig. 1 𝑦 = ( 𝑢sin 𝛼 ) 𝑡 − ( 1 2 𝑔 𝑡2 ) ------------------- (1) And 𝑥 = ( 𝑢 cos 𝛼 ) 𝑡 ----------- (2) Therefore, 𝑡 = 𝑥 𝑢 cos 𝛼 Substituting in (1) 𝑦 = ( 𝑢sin 𝛼 ) 𝑥 𝑢 cos 𝛼 − ( 1 2 𝑔 𝑥2 𝑢2 cos2 𝛼 ) 𝑦 = 𝑥 tan 𝛼 − 𝑔 𝑥2 2 𝑐𝑜𝑠2 𝑢2 ---------- (3) Equation (3) is known as equation of trajectory 7.4 Derivation of expression for the time of flight of the projectile on a horizontal plane: We have, 𝑠 = 𝑢𝑡 + 1 2 𝑎 𝑡2
  • 5. Chapter No. 7 Circular Motion Page 5 𝑦 = ( 𝑢sin 𝛼 ) 𝑡 − ( 1 2 𝑔 𝑡2 ) ------------------- (1) i.e. s = y, u = u sin α and a = g When the projectile p is at point B, y = 0 Substituting, the value of y in eqn (1) 0 = ( 𝑢 sin 𝛼 ) 𝑡 − ( 1 2 𝑔 𝑡2 ) ( 𝑢 sin 𝛼 ) 𝑡 = ( 1 2 𝑔 𝑡2 ) ( 𝑢sin 𝛼 ) = ( 1 2 𝑔 𝑡) 𝑡 = 2 𝑢sin 𝛼 𝑔 i.e. 1) time required to reach the maximum height 𝑡 2 = 𝑢 sin 𝛼 𝑔
  • 6. Chapter No. 7 Circular Motion Page 6 7.5 Derivation of the expression for horizontal range (R) of the projectile: We know, Horizontal component of velocity = u cos α And Time of flight, 𝑡 = 2 𝑢sin 𝛼 𝑔 Therefore, [Horizontal range ] = [ 𝐻𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦] 𝑥 [Time of flight] = [u cos α] 𝑥 [ 2 𝑢 sin 𝛼 𝑔 ] 𝑅 = sin 2 𝛼 𝑢2 𝑔 Note: The range will be maximum when sin 2α = 1
  • 7. Chapter No. 7 Circular Motion Page 7 2α = 900 α = 450 Rmax = 𝑢2 𝑔 7.6 Derivation of expression for the maximum height of a projectile on a horizontal plane: We have, the vertical component of initial velocity u is v = u sin α and vertical component of final velocity v = 0 Therefore, Average velocity = 𝑢 sin 𝛼+0 2 = 𝑢 sin 𝛼 2 Now, [ 𝑣𝑒𝑟𝑡𝑖𝑐𝑎𝑙 𝑑𝑖𝑠𝑡𝑎𝑛𝑐𝑒] = [ 𝐴𝑣𝑒𝑟𝑎𝑔𝑒 𝑣𝑒𝑟𝑡𝑖𝑐𝑎𝑙 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦] x [ 𝑡𝑖𝑚𝑒]
  • 8. Chapter No. 7 Circular Motion Page 8 = 𝑢 sin 𝛼 2 𝑥 𝑢 sin 𝛼 𝑔 = 𝑠𝑖𝑛2 𝛼 𝑢2 2 𝑔 Where, 𝑢 sin 𝛼 𝑔 = is the time required by the projectile to reach the maximum height H = 𝑠𝑖𝑛2 𝛼 𝑢2 2 𝑔 Questions:- 1. A projectile is fired upwards at an angle of 300 with a velocity of 40 m/s. Calculate the time taken by the projectile to reach the ground after firing. 2. If a particle is projected inside a horizontal tunnel which is 5 m high with a velocity of 60 m/s, find the angle of projection and the greatest possible range. 3. The range of projectile on a horizontal plane is 240 m and the time of flight is 8 sec. Find the initial velocity and the angle of projection. 4. A body is projected at such an angle that the horizontal range is three times the greatest height. Find the angle of projection. 5. Find the least initial velocity which a projectile may have, so that it may clear a wall 3.6 m high and 4.8 m distant (from the point of projection) and strike the horizontal plane through the foot of the wall at a distance 3.6 m beyond the wall. The point of projection is at the same level as the wall. 6. Find the angle of projection at which the horizontal range and the maximum height of a projectile are equal. May 2010 (06 MKS) 7. A particle is projected in air with a velocity 100 m/s and at an angle of 300 with the horizontal. Find: 1) The horizontal range 2) The maximum height by the particle 3) And the time of flight Ans: R = 882.8 m, Hmax = 127.42 m, t = 10.19 sec
  • 9. Chapter No. 7 Circular Motion Page 9 8. A projectile is fired with an initial velocity of 250 m/s at a target located at a horizontal distance of 4 km and the vertical distance of 700 m above the gun. Determine the value of firing angle to hit the target. (Neglect air resistance). Ans: α = 68.820 and 31.080 9. A projectile is aimed to a mark on a horizontal plane through the point of projection and fall 12 m short of the mark and with an angle of projection 150. While it overshoots the mark by 24 m when the angle of projection to hit the mark. Assume no air resistance. Take the velocity of projection is constant in all cases. Ans: R = 48 m, u = 26.57 m, α = 20.550 Case I) Projectile projected horizontally from certain height a) Considering vertical motion of projectile We have, S = 𝐮𝐭 + 𝟏 𝟐 𝐚𝐭 𝟐 Here, S = y = vertically downward displacement u = initial velocity = u sin α = 0 a = acceleration due to gravity = g = 9.81 m/s2 ∴ y = 𝟏 𝟐 𝐠 𝐭 𝟐 ---------- (1) b) Considering horizontal motion of projectile [Horizontal range ] = [ 𝐻𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦] 𝑥 [Time of flight] x = u x t --------- (2)
  • 10. Chapter No. 7 Circular Motion Page 10 Problems: 1) An aircraft moving horizontally at a speed of 1000 kmph at a height of 1500 m releases a bomb which hits the target. Find: 1) Time required for the bomb to reach the target on ground 2) The horizontal distance of the aircraft from the target when it releases the bomb. (May 2007 8 MKS) Ans: t = 17.49 sec and x = 4857.66 m 2) Solve the same problem when y = 2000 m and u = 150 m/s. Ans: t = 20.2 sec and x = 3030m 3) Find out u = ? when y = 100 m and x = 200 m Ans: t = 4.515 sec and u = 44.3 m/s 4) Find y = ? and u = ? when time required to strike the ground is 15 sec when x = 50 m. Ans: y = 1103.625 m and u = 3.33 m/s 5) A person wants to jump over a ditch as shown in Fig. below. Find the max. velocity with which he should jump? (May 2006 6 MKS) Ans: t = 0.638 sec and u = 4.702 m/s
  • 11. Chapter No. 7 Circular Motion Page 11 Case II) Projectile projected at an angle α from certain height (say y) a) Considering vertical motion of projectile We have, S = 𝐮𝐭 + 𝟏 𝟐 𝐚𝐭 𝟐 Here, S = y = vertically downward displacement u = initial vertical velocity = u sin α = 0 a = acceleration due to gravity = g = 9.81 m/s2 ∴ − y = (u sin α) – 𝟏 𝟐 𝐠 𝐭 𝟐 y = - (u sin α) + 𝟏 𝟐 𝐠 𝐭 𝟐 ---------- (1) b) Considering horizontal motion of projectile [Horizontal range ] = [ 𝐻𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦] 𝑥 [Time of flight] x = u cos α x t --------- (2) Velocity with which it strikes the ground (VB): VB = u = initial velocity
  • 12. Chapter No. 7 Circular Motion Page 12 VH = u cos α VV = u sin α We have, 𝐯 = 𝐮 + 𝐚𝐭 -VV = u sin α – gt VV = -u sin α + gt VB = √ 𝑽 𝑯 𝟐 + 𝑽 𝑽 𝟐 --------------- (velocity of hit) Direction of hit: θ = tan-1 ( 𝑽 𝑽 𝑽 𝑯 ) ------------ (with the horizontal) Problems: 1. A body is projected from the top of the tower 40 m high and strikes the ground after 10 seconds at a point 400 m from the base of the tower. Determine the velocity and angle of projection. Also determine the maximum height attained by the body above ground level. Dec. 2009 (10 MKS) Ans: u = 60.24 m/s and Hmax = 143.43 m 2. A cricket ball is thrown by a fielder from a height of 2 , at an angle of elevation 300 to the horizontal with an initial velocity of 20 m/s, hits the wickets at a height of 0.5 m from the ground. How far the fielder from the wicket? (May 2004 12 MKS) Ans: t = 2.181 sec, x = 37.77 m 3. A solider fires a bullet at an angle of elevation 300 from his position on the top of hill to strike a target which is 60 m lower than the position of the solider. The initial velocity of the bullet is 75 m/s. Calculate: a) Hmax to which bullet rise above horizontal b) The actual velocity with which it will strike the target c) Total time required by for the flight of the bullet
  • 13. Chapter No. 7 Circular Motion Page 13 Ans: Hmax = 131.74 m, t = 9.01 sec, vB = 82.456 m/s, θ = 38.020 4. A projectile fired from the edge of a 150 m high cliff with an initial velocity of 180 m/s at an angle of elevation of 300 with the horizontal. Neglecting air resistance. Find: 1) The greatest elevation above the ground reached by the projectile and 2) Horizontal distance from gun to the point, where the projectile strikes the ground. Ans: Hmax = 563.3 m, t = 19.9 sec, R = 3.012 km Case III) Projectile projected at an angle α from certain height to the downward (say y) c) Considering vertical motion of projectile We have, S = 𝐮𝐭 + 𝟏 𝟐 𝐚𝐭 𝟐 Here, S = - y = vertically downward displacement u = initial vertical velocity = - u sin α a = acceleration due to gravity = - g = 9.81 m/s2 ∴ − y = ( - u sin α) – 𝟏 𝟐 𝐠 𝐭 𝟐 y = (u sin α) + 𝟏 𝟐 𝐠 𝐭 𝟐 ---------- (1) d) Considering horizontal motion of projectile [Horizontal range ] = [ 𝐻𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦] 𝑥 [Time of flight]
  • 14. Chapter No. 7 Circular Motion Page 14 x = u cos α x t --------- (2) Velocity with which it strikes the ground (VB): VB = u = initial velocity VH = u cos α VV = u sin α We have, 𝐯 = 𝐮 + 𝐚𝐭 -VV = - u sin α – gt VV = u sin α + gt VB = √ 𝑽 𝑯 𝟐 + 𝑽 𝑽 𝟐 --------------- (velocity of hit) Direction of hit: θ = tan-1 ( 𝑽 𝑽 𝑽 𝑯 ) ------------ (with the horizontal) Problems: 1) A stone is thrown from the top of the tower 30 m high at an angle of 400 with horizontal with velocity 40 kmph. Find when and where the stone will hit a horizontal ground. Also find the velocity and direction of striking. Ans: t = 1.85 sec, x = 15.74 m, Vb = 26.67 m/s, θ = 71.390