1 3-dosage form design

Dosage Form Design:
Pharmaceutical and Formulation
Considerations

Dosage Form Design
 Pharmaceutics
- study on the: formulation, manufacture, stability,
and effectiveness of pharmaceutical dosage forms
 Pharmaceutical ingredients or excipients
-Selective use of these non medicinal agents
- Uses
solubilize thicken stabilize flavor
suspend dilute preserve efficacious
suspend emulsify color appealing closure forms.

Requirements of a proper design
& formulation of dosage form
Consideration of drug substances:
 Physical, chemical & biological characteristics
*compatible with one another - stable, efficacious,
attractive, easy to administer & safe
*manufactured under appropriate measures of quality
control & packaged in containers to make product
stable
*labeled to promote correct use & stored under
conditions to maximize shell life

The Need for Dosage Forms
 To protect the drug substance from the
destructive influences of atmospheric oxygen
or humidity. (Coated tablets)
 To protect the drug substance from the
destructive influence of gastric acid after oral
administration. (Enteric-coated)

 To conceal the bitter, salty or offensive taste
or odor of a drug substance. (Capsules,
Flavored syrups)
 To provide liquid preparations of substances
that are either insoluble or unstable in the
desired vehicle. (Suspension

 To provide clear liquid dosage forms of
substances. (Syrups, Solutions)
 To provide rate-controlled drug action.
(Controlled-release tablets)
 To provide optimal drug action from topical
administration sites. (Ointments,Creams,
Transdermal patches)

 To provide for insertion of a drug into one of the
body’s orifices (Suppositories)
 To provide placement of drugs directly in the
bloodstream or body tissues (Injections)
 To provide for optimal drug action through
inhalation therapy (Inhalants, Inhalation
aerosols)

General Considerations in Dosage Form Design
 Determine desired product type - framework for
product development.
 develop and examine initial formulations of the
product:
- desired features: drug release profile bioavailability
clinical effectiveness
- pilot plant studies and production scale-up.

 master formula
- formulation that best meets the goals of the
product
 Factors to consider before formulation of a
medicinal agent in one or more dosage forms
 Therapeutic matters (nature of the illness)
 manner it is treated (locally or through
systemic action)
 age and anticipated condition of the patient.

Preformulation Studies
 drug be chemically and physically
characterized
 define the nature of the drug substance.

Three ways liquid drug be given in
solid form
Liquid substance:
 Sealed in soft gelatin capsule
 Developed into a solid ester or salt form
suitable for tablets or drug capsules
 Mixed with a solid or melted semisolid
material
- melted mixtrue is poured into hard gelatin
capsules to harden & capsules sealed

1. Physicochemical Description
• physical description of particle size,
crystalline structure, melting point solubility
etc.
• Chemical properties of structure form
reactivity
• purity of the chemical substance for:
identification and for evaluation of its
chemical, physical, and biologic properties

 indication of particle size and size range of the
raw material along with the crystal structure.
 information generated in formulation
processing attributable to changes in particle or
crystal characteristic changes of the drug molecules
or particles.
2. Microscopic Examination

3. Melting Point Depression
 Determines the: purity of the substance
compatibility of various subs before
inclusion in the dosage form
- pure subs: sharp melting point
- impure subs: depressed melting point

4. Phase Rule
 Phase diagrams constructed determines:
- existence & extent of the presence of solid and
liquid phases in binary, ternary & other mixtures
Particle Size
- affects : physical–chemical properties of drug subs’s:
*dissolution rate bioavailability content uniformity
stability taste texture
flow properties absorption sedimentation rate

Polymorphism
- substances can exist in more than one crystalline
form
 Polymorphic forms – diff. physical-chemical
properties (incl. melting pt. & solubility)
 Evaluation of:
*crystal structure (microscopy,
IR spectroscopy, thermal analysis, x-ray
diffraction)
*polymorphism & *solvate form

Solubility
 Determined by equlibrium solubility method
- excess amount of drug + solvent = shaken at
constant temp. over a prolonged period of time until
equilibrium is obtained
 Drug possess aqueous solubility - for therapeutic
efficacy.
 Insoluble compounds: incomplete/erratic absorption

Solubility
 Solubility & particle size
 Solubility & pH
- drug formulated to liquid product:
adjustment of pH of solvent where drug is
dissolved to adjust solubility
- Weak acidic or basic drugs - require
extremes in pH outside or accepted
physiologic limits or that may cause stability
problems with formulation ingredients.

Dissolution Rate
 time for the drug to dissolve in the fluids at the
absorption site (rate-limiting step in absorption).
 Dissolution rate of drugs - increased by decreasing
the particle size.
 for higher dissolution rate
- use a highly water soluble salt of the parent
substance.

2 methods in determining dissolution rates of
chemical compounds
1.Constant surface method
- intrinsic dissolution rate of the agent
- Characteristic of compound & solvent under fixed
experimental conditions
- mg dissolved/min/cm square
2.Particulate dissolution
- Weighed amount of powdered sample + dissolution
medium in constant agitation system
- to study the influence of particle size, surface
area, and excipients upon the active agent

Fick’s law (law of diffusion)
- describes the:
* relationship of diffusion & dissolution of the
active drug in the dosage form & when
administered in the body
- 1st law
*relates to a steady state flow
- 2nd law
*relates to a change in conc. of drug with time,
at any distance, or a nonsteady state of flow

Membrane Permeability
 Everted intestinal sac
- determines degree & rate of passage of drug through
the membrane sac by passive & active transport
 early assessment of passage of drug molecules across
biologic membranes
 To produce a biologic response - drug molecule must first
cross a biologic membrane
 The biologic membrane (lipid barrier) - permits absorption
of lipid soluble substance by passive diffusion
 Molecules’ lipophilic character – measured by the oil-
water coefficient

Basis of pH-partition coefficient
Interrelationship at the absorption site & absorption
characteristics of various drugs:
 Dissociation constant
 lipid solubility
 pH
Indication of absorption expectations:
 Data from basic physicochemical studies: pKa,
solubility & dissolution rate

Partition Coefficient
 selection of appropriate extraction solvents,
drug stability, use of salting-out additives and
environmental concerns.

pKa / Dissociation Constants
 extent of ionization of drug - strong effect on
formulation & pharmacokinetic parameters of
the drug
 determined by potentiometric titration
- for the pharmacist important:
*predicting precipitation in admixtures
*calculating solubility of drugs at certain pH
values

Stability
-extent a product retains within specified
limits and through its period of storage and
use
Stability studies conducted in the
preformulation phase:
 Solid-state of the drug alone
 Solution phase
 with the expected excipients

Drug and Drug Product Stability
 Evaluation of:
- physical and chemical stability of pure drug
substances -important for preformulation.
Drug Stability : Mechanisms of Degradation
-Chemically drug substances with different
susceptibilities toward chemical instability:
alcohols, phenols, aldehydes, ketones, esters,
ethers, acids, salts, alkaloids, glycosides and
others.

most frequently encountered
destructive process:
 Hydrolysis (solvolysis process)
- (drug) molecules interact with water
molecule to yield breakdown product.
- susceptible to the hydrolytic process: esters,
substituted amides, lactones, and lactams

most frequently encountered
destructive process:
 OXIDATION
- loss of electrons from an atom or molecule;
- involves free radicals (molecules or atoms
containing one or more unpaired electrons).
- destructive to: aldehydes, alcohols,
phenols, sugars, alkaloids & unsaturated fats
& oils

Drug and Drug Product Stability:
A. Kinetics and Shelf Life
Five types of stability
1. Chemical –active ingredient retains chemical
integrity and labeled potency within the specified
limits.
- important for selecting:
*storage conditions (temp., light, humidity)
*proper container for dispensing
*anticipating interactions when mixing drugs &
dosage forms
- must know reaction order & rate

2. Physical - original physical properties, appearance,
palatability, uniformity, dissolution and
suspendability are retained.
3. Microbiologic –sterility/resistance to
microbial growth
4. Therapeutic –therapeutic effect remains
unchanged
5. Toxicologic - no significant increase in
toxicity occurs.

Drug and Drug Product Stability:
B. RATE REACTIONS
- description of the drug concentration with
respect to time.
C. Q10 METHOD
- estimate the shelf life of a product that
has been stored or to be stored under a
different set of conditions.

ENHANCING STABILITY
 drugs subjected to hydrolysis
*water reduced or eliminated from the system.
*water-liable drugs - waterproof protective coating
applied in the tablet.
*in liquid formulation - water replaced by substitute
liquids.
*suspending them in nonaqueous vehicle
*for injectable products – anhydrous vegetable oils
may be used as solvent

ENHANCING STABILITY
 For unstable antibiotic drugs (aq. prepn desired)
- supplied in dry form for reconstitution before
dispensing
 For unstable prepns: storage under refrigeration
 pH – major determinant in stability
- optimum stability: pH 5 & 6
- buffering agents increases stability

ENHANCING STABILITY
 oxygen sensitive drugs
* prepared in dry state
*packaged in sealed containers with air replaced by
inert gas (Nitrogen, carbon dioxide).
* add antioxidants (for stability):
- in aq. Prepns:
Na2SO3, NaHSO3, H3PO2, ascorbic acid
- in oleaginous/unctous prepns:
alpha tocopherol, butylhydroxyanisole &
ascorbyl parmitate

ENHANCING STABILITY
 trace metals in drug, solvent, container or
stopper
- source of difficulty in preparing stable solns
of oxidizable drugs
- eliminated by:
*purification of source of contaminant
*complexing or binding metal by using
specialized agents (chelating agents- Ca
disod edetate & EDTA)

ENHANCING STABILITY
 Light
- catalyst to oxidation reactions
- prepns packaged in light resistant or
opaque containers

In summary : easily oxidizable
drugsmay be stabilized in formulation
by:
 selective exclusion from the system of:
oxygen oxidizing agents trace metals
light heat other chemical
catalysis
 add to create and maintain a favorable pH:
antioxidants chelating agents
buffering agents

Other destructive process in
pharmaceutical preparations
 Polymerization
- reaction between two or more identical molecules
with resultant formation of new & generally larger
molecule (formaldhyde)
Process where one or more active chemical groups
removed:
 Chemical decarboxylation
 deamination

 Decarboxylation
- decomposition of RCOOH & release of CO2
 Deamination
- removal of nitrogen containing group from
organic amine (ex. Insulin)

Importance of Drug Stability
 in preclinical testing and in clinical (human)
trials
- for a true and accurate assessment of the
drug/drug prod evaluated
 marketed drug product
- for the safety and effectiveness when
distributed and during the entire course of its
shelf-life and use

Product stability assessed before
marketing:
 Formulation
 Influence of:
- pharmaceutic ingredients present
- container & closure
 Manufacturing & processing conditions
 Packaging components & conditions of
warehousing/storage
 Conditions of shipping, temp., light & humidity
 Shelf life & patient utilization

stability testing considerations
 product containers, closures, and other
packaging features
 parenteral and other sterile prods must meet
sterility test stds
- to ensure protection against microbial
contamination

Drug instability detected
 Change in:
physical appearance, color, odor, taste or
texture of the formulation

Scientific data pertaining to the
stability of a formulation
 leads to:
*prediction of the expected shelf-life of the
proposed product
*redesign of the drug (to more stable salt or
ester form)
*reformulation of the dosage form.


Accelerated stability testing
 Use of exaggerated conditions of temp., humidity,
light & others
 accelerated temp
- 6 mons study at 40 o C with 75% relative humidity

Short term accelerated studies
 Determines most stable of the proposed formulations
for a drug product
 lesser temp and humidity
- 30oC and 60% humidity

 Stress testing
- temp. elevations in 10o increments higher
than used in accelerated studies
- employed until chem.. or phy. Degradation

Long term stability studies
 product is subjected to different climatic
zones (temp. & humidity)nationally &
internationally
 predicted from the data generated from
continuing stability studies
 12 months minimum and conducted at 25 o C
+/- 2oC and at a relative humidity of 60% +/-
5%

PACKAGING & STORAGE of
PHARMACEUTICALS
 labeling is essential for:
*prod. stability
*efficacious use
 CONTAINERS
- stds for packaging of pharmaceuticals by
manufacturers are contained in the CGMP

Tests performed depending on the
intended use and type of container:
 physicochem. tests
 light-transmission tests for glass or plastic
 drug compatibility
 leaching and or migration tests,
 vapor-transmission test for plastics, moisture barrier tests,
toxicity studies for plastics,
 valve, actuator, metered-dose, partical size, spray
characteristics, leak testing for aerosols,
 sterility and permeation tests for parenteral containers
 drug stability for all packaging

According to USP:
 CONTAINER
- holds the article and is or may be in direct contact
with the article
 IMMEDIATE CONTAINER
- in direct contact with the article at all times
 Closure
- part of the container
 Closure & container
- clean and dry prior to its being filled with the drug

CLASSIFICATION OF CONTAINERS BY THE BP
according to their ability to protect their contents
from external conditions:
 well-closed container
- protects the contents from extraneous solids and from:
*loss of the article under ordinary conditions of handling,
shipment, storage & distribution
 tight container
- protects the contents from contamination by extraneous liqs.,
solids, or vapors, from:
* loss of the articles, and from efflorescence, deliquescence,
or evaporation under the ordinary or customary conditions of
handling, shipment, storage and distribution and is capable of
tight re-closure

CLASSIFICATION OF CONTAINERS BY THE USP
 hermetic container
- impervious/resistant to air or any other gas under the ordinary or
customary conditions of handling, shipment, storage, and distribution
- those sterile are generally used to hold prepns intended for injection
or parenteral adm
 single-dose container
- quantity of drug contained is intended as a single dose and when
opened cannot be resealed with assurance that sterility has been
maintained
- includes fusion-sealed ampules, pre-filled syringes and cartridges

 single-dose container
- designed to hold a quantity of drug intended for adm as a single dose
promptly after the container is opened
- single-unit package is termed a unit-dose package when dispensed
to a patient
- may be performed on a large scale by a manufacturer or distributor
or on a smaller scale by the pharmacy dispensing the medication

 multiple-dose container
- hermetic container that permits withdrawal of successive
portions of the contents without changing the strength or
endangering the quality or purity of the remaining portion
- referred as vials
- contain more than a single unit or dose of the medication

 Tablets, capsules & oral liquids
- packaged in single-unit or multiple-unit
containers

Single-unit packages
 convenient & sanitary means of maintaining and utilizing the
medication
 advantages:
*positive ID of each dosage unit and reduction of medication
errors
*reduced contamination of the drug due to its protective
wrapping
*reduced dispensing time
*greater ease of inventory control in the pharmacy or nursing
station
*elimination of waste through better medication management
with less discarded medication

 Packaging materials
- may be combinations of paper, foil, plastics
or cellophane
 Packaging of solid dosage forms in:
*clear plastic or aluminum blister wells
- most popular method of single-unit
packaging

 Oral liquids
- may be single-unit dispensed in:
*paper *plastic *foil cups
*pre-packaged and dispensed in glass
containers (with threaded caps or crimped
aluminum caps)

Light resistant containers
 required by many pharmaceutical prods to protect them
from photochem. deterioration
 amber glass or light resistant opaque plastic will reduce
light transmission sufficiently to protect a light-sensitive
pharmaceutical
 UV absorbers may be added to plastic to decrease the
transmission of short UV rays
 must meet the USP stds w/c define the acceptable limits
of light transmission at any wavelength of light between
290 and 450 nm

Classification of glass used in packaging pharmaceuticals
depending upon the chem.. constitution of the glass and its
ability to resist deterioration:
 Type I highly resistant, borosilicate glass
 II treated soda-lime glass
 III soda-lime glass
 NP gen. purpose soda-lime glass
 Types I, II & III for parenteral prods
 Type NP – for non-parenteral

Newer plastic materials used:
 PET – polyethylene terephthalate
 amorphous PET (APET)
 PET glycol (PETG)
 APET & PETG
- excellent transparency, luster and can be
sterilized with gamma radiation

Problems encountered in the use of
plastics in packaging:
 permeability of the containers to atmospheric oxygen
and to moisture vapor
 leaching of the constituents of the container to the
internal contents
 absorption of drugs from the contents to the
container
 transmission of light through the container
 alteration of the container upon storage

properties of plastics may be
altered
 addition of:
- plasticizers, stabilizers, antioxidants, antistatic agts,
antimold agts, colorants, and others
drug subs’s subjected to oxidative degradation
- may undergo a greater degree of degradation when
packaged in plastic as compared to glass

LEACHING
 movement of components of a container into the contents
 Cpds leached from the plastic containers:
polymer additives as the plasticizers, stabilizers or
antioxidants
 occurs when liq. or semi-solid dosage forms are
packaged in plastic
 little leaching occurs for tabs or caps packaged in plastic
 Influenced by:
*temp *excessive agitation of the filled container
*solubilizing effect of liq. contents on one or more of the
polymer additives

 Soft-walled plastic containers of PVC –
polyvinyl Cl
- used to package IV solns and blood for
transfusion


SORPTION
 binding of molecules to polymer materials
 absorption and adsorption are considered
 occurs through chem. or phy. means due to:
*chem.. structure of the solute molecules
*phy. and chem. properties of the polymer
 occurs with active pharmacologic agts or with pharmaceu.
excipients thus, ings must be examined in the proposed plastic
packaging to determine its tendency

 Pharmacist should dispense medication to
patients in:
- same type & quality of container used by
the manufacturer of the product.

Child-Resistant/Adult-Senior Use Packaging
 Child-resistant container
- defined as:
*significantly difficult for children under 5 years of age to open
or to obtain a harmful amount of its contents within a
reasonable time
*not difficult for “normal adults” to use properly.
 Child-proof closures
- initial regulations called for its use for
*aspirin products *certain household chemical products
- shown to have a significant potential for causing accidental
poisoning in youngsters

Drugs intended for oral use
 dispensed by the pharmacist to the patient in containers having
child-resistant closures unless the prescriber or the patient
specifically requests otherwise, or unless the product is
specifically exempt from the requirement
 Adults, particularly the elderly or those with arthritis or
weakened hand-strength (with difficulty opening child-resistant
packages)
- the regulations were amended and (1998) to require that
child-resistant containers be capable of being readily opened
by senior adults

STORAGE
 product must be stored under proper
conditions
- to ensure the stability of a pharmaceutical
prepn for the period of its intended shelf life
 Labeling of each product
- includes the desired conditions of storage

Terms employed for the desired
conditions as defined by the USP:
 Cold
- any temp not exceeding 8oC (46oF)
- a refrigerator is a cold place where the
temp. is maintained bet. 2o and 8oC (36o
and 46oF)
 Cool
- any temp bet. 8o and 15oC (46o and 59oF)

Terms employed for the desired
conditions as defined by the USP:
 Room Temp.
- temp prevailing in a working area
- 20o to 25oC (68oF to 77oF) but also allows for temp variations
bet 15o and 30oC (59o and 86oF) experienced in pharmacies,
hospitals, and drug warehouses
 Warm
- any temp bet 30o and 40oC (86o and 104oF)
 Excessive Heat
- any temp above 40oC (104oF)

Protection from Freezing
 protects the product from:
*freezing
*risk of breakage of the container
*loss of strength or potency
*destructive alteration of the dosage form

Stability Testing
Signs of degradation of the specific dosage forms
must be observed and reported.
 Tablets : Apperance (cracking, chipping, mottling),
friability, hardness, color.
 Capsules: Moisture tackiness, color appearance,
shape, brittleness and dissolution
 Oral Solutions and Suspensions: Appearance,
precipitation, pH, color, odor, dispersibility
(suspension) and clarity (solutions)

 Oral Powders: Appearance, color, odor, moisture
 Metered–dose inhalation aerosols delivered dose
per activation, number of metered doses, color,
particle size distribution, loss of propellant, pressure,
valve corrosion, spray pattern, absence of
pathogenic microorganism
 Topical creams: ointments, lotions, solutions, and
gels. Appearance, color, homogeneity, odor, pH,
resuspendability (lotions), consistency, particle size,
distribution strength, weight loss.

 Opthalmic and Nasal and Oral inhalation
preparations: Appearance, color
consistency, pH, clarity (solutions), particle
size, and resuspendability (suspensions,
ointments), strength and sterility.
 Small Volume Parenterals: Appearnace,
color, clarity, particulate matter, pH volumes
and extractables (when plastic containers
are used), sterility, pyrogenicity and closure
integrity.

 Suppositories: Softening range; appearance
and melting.
 Emulsions: Appearance (such as phase
separation) color, odor, pH, and viscosity.
 Controlled release membrane drug delivery
systems: seal strength of thr drug reservoir,
decomposition products, membrane
integrity, drug strength and drug release
rate.

FDA guidelines on stability for
extemporaneous compounding
 Nonaqueous liquids & solid formulations
(source of active ingredient)’s
- not later than 25% of the time remaining until the
product’s expiration date or 6 months, whichever is
earlier
 Nonaqueous liqs & solid formulations in w/c USP or
NF substance (source of ing)
- beyond-use not later than 14 days in storage at cold
temperatures

FDA guidelines on stability for
extemporaneous compounding
 Other formulations beyond-use date of the
intended duration of therapy or 30 days
whichever is earlier

PHARMACIST:
 oral aq. liq prepns made from existing tab or cap formulation
- pharmacist should make up only at most a 14 days supply and
must be stored in a ref.
 must dispense the medication in a container conducive to
stability and use
- advise the patient of the proper method of use and conditions
of storage of the medication
 when compounding on the basis of extrapolated or less than
concrete information
- should keep the formulation simple and not to shortcut but
use the necessary pharmaceutical adjuvants to prepare the
prescription

Stability testing
 manufactured products - shelf life of 2 or
more years to ensure stability at the time of
consumption.
 expiration date - limits the time during which
the product may be dispensed by the
pharmacist or used by the patient.

PHARMACEUTIC INGREDIENTS
(PIs)
 required in preparing the drug subs. into a
final dosage form
 for each dosage form:
*establish the primary features of the prod
*contribute to the physical form, texture,
stability, taste and over all appearance

Pharmaceutical Ingredients and
Excipients
Definition of terms
 Solvents are used to dissolve the drug
substance.
 Flavors and sweeteners are used to make
the product more palatable
 Colorants are added to enhance appeal
 Preservatives may be added to prevent
microbial growth

Excipients
 Stabilizers (antioxidants and chelating) - to prevent
decomposition.
 Diluents or fillers - to increase the bulk of the
formulation.
 Binders – to cause adhesion of the powdered drug
and pharmaceutical substances.
 Antiadherents or lubricants to assist smooth tablet
information.

Excipients
 Disintegrating agents - promote tablet break
up after administration and coatings to
improve stability, control disintegration or
enhance appearance.

Sweetening Pharmaceuticals
 used in foods and pharmaceuticals:
*sucrose
*artificial sweetening agents
 SWEETENING PHARMACEUTICALS
- mask unwanted taste
- commonly used - sucrose
-Delaney Clause: no new food additives may be
used if animal studies/appropriate tests showed that
it caused cancer

 Saccharin & cyclamate - used in foods
-“generally recognized as safe” (before the
amendment’s passage)
- use on rats: developed incidence of bladder
tumors (cancer)
- continued availability but warning labels be used
-cyclamates (banned) - possible carcinogenicity,
genetic damage, testicular atrophy

 Aspartame –
- 1st artificial sweetener (1958 amendment)
w/ requirement for pre-marketing proof of safety.
- Acesulfame potassium (nonnutritive sweetener)
- structurally similar to saccharin (USP approved)
-130 times as sweet as sucrose, excreted unchanged in
the urine;
- more stable than aspartame
- Stevia (Stevia rebaudiana Bertoni)
– new sweetening agent: natural, nontoxic, safe,
30x sweeter than cane sugar/sucrose

Sucrose Saccharin aspartame
Source Sugar cane;
sugar beet
Chemical
synthesis;
phthalic
anhydride
Methyl ester
dipeptide of
phenylalanine
and aspartic
acid
Relative
sweetness
1 300 180-200
Bitterness None Moderate to
strong
none
After taste None Moderate to
strong metallic
to bitter
none
Calories acid
stability
4/g 0 4/g
Acid stability good Excellent fair

Coloring Pharmaceuticals
 for esthetics.
 Coal tar (pix carbonis)
- thick black viscid liquid
- by product of destructive distillation of coal.
- source of synthetic coloring agents in pharm.
products in the middle of the 19th century
 Dyes – added to pharmaceutical prens in the form of
diluted solutions
 Lakes - commonly used in the form of fine
dispersions or suspensions.

Coloring Pharmaceuticals
 90% of the dyes used in the products - synthesized from
derivative of benzene (aniline)
 FDA - regulates use color additives in foods, drugs, and
cosmetics (Federal Food, Drug, and Cosmetic Act of 1938)
- FD&C color additives - foods, drugs, and cosmetics
- D&C color additives - drugs, some in cosmetics &
medical devices
- external D&C color additives - restricted to external parts
of the body (not including the lips and other parts that
are covered by mucous membrane)

Factors in selecting dyes
 Solubility of prospective dye
 pH & pH stability of the preparation to be
colored
 Dyes must be photostable

Preservatives
 liquid and semisolid preparations
- must be preserved against microbial
contamination.

Sterilization and Preservation
 some types of pharmaceutical products
(ex. Ophthalmic and injectable preparations)
- sterilized by physical methods :
*autoclaving (20min at 15 lb. press. &
121°C, dry heat at 180°C for 1 hr)
*bacterial filtration.

 Preparations that provide excellent growth media for
microbes
- aqueous preparations: syrups, emulsions,
suspensions
- semi solid preparations particularly creams.
- hydro-alcoholic & most alcoholic preparation
*may not require addition of chemical
preservative

 prevent microbial growth:
*15% alcohol in acid media
*18% alcohol in alkaline media.
 Alcohol-containing pharmaceuticals (elixirs,
spirits, and tinctures) - self sterilizing and do
not require additional preservation.

Preservative Selection
 Considerations in selecting preservative in pharmaceutical
preparations:
1. prevents the growth of the type of microorganisms
( contaminants of the preparations)
2. soluble enough in water to achieve adequate
concentrations in aqueous phase with two or more phase
systems
3. proportion of preservative remaining undissociated at the pH
of preparation (can penetrate the microorganism &
destroy its integrity).

Preservative Selection
4. concentration of the preservative does not affect the
safety/comfort of the patient
5. with adequate stability and not reduced in
concentration by chemical decomposition/volatilization
6. compatible with all other formulative ingredients and
does not interfere with them
7. does not adversely affect the preparation’s container
or closure.

Mode of action
Mechanisms preservative interfere with microbial
growth, multiplications, and metabolism:
1. Modifications of cell membrane permeability and
leakage of cell constituents (partial lysis)
2. Lysis and cytoplasmic leakage
3. Irreversible coagulation of cytoplasmic constituents
4. Inhibition of cellular metabolism by interfering with
enzyme systems/inhibition of cell wall synthesis
5. Oxidation of cellular constituents
6. Hydrolysis

PRESERVATIVE UTILIZATION
PRESERVATIVES:
- suitable substances added to enhance its permanency
or usefulness
- examples: commonly employed:
benzoic acid alcohol
sodium benzoate phenylmercuric nitrate and acetate
phenol benzalkonium chloride

PRESERVATIVE UTILIZATION
 IV prepns in large volumes as blood
replenishers/nutrients
- no bacteriostatic additives
 Injectable prepns in small volumes
- can be preserved with suitable
preservatives

1 3-dosage form design

More Related Content

What's hot (20)

Similar to 1 3-dosage form design (20)

More from University of Zambia, School of Pharmacy, Lusaka, Zambia (20)

Recently uploaded (20)

1 3-dosage form design